Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: imon vdf + remote  (gelezen 3407 keer)

Offline chris.

  • Lid
    • http://www.linuxmintusers.be
  • Steunpunt: Nee
imon vdf + remote
« Gepost op: 2009/01/29, 20:15:48 »
ik heb een imon vdf display in mijn pc icm een afstandsbediening,

ik heb er lirc voor nodig,,,bekend en geinstalleerd via synaptic maar dit is niet genoeg.

nu kwam ik deze site tegen:

http://venky.ws/projects/imon/#lirc

en volgens mij is optie 2:LCDproc 0.4.5 for iMON
het meest geschikt voor mij.

ik wil het display weer aankrijgen en instellen[zonder eerst xp te booten] en de volumeknop en remote kunnen gebruiken.

maar ik heb niet genoeg ervaring met het uitpakken en installeren en configureren van deze tarrbal.

helemaal voorkouwen hoeft niet [mag wel XD] maar kan iemand me op weg helpen?

Offline Gijsbert

  • Lid
  • Steunpunt: Ja
Re: imon vdf + remote
« Reactie #1 Gepost op: 2009/01/29, 20:32:37 »
Oke gaat ie:
1) Rechtsklik op de tarball, kies uit het menu "Hier uitpakken" nu is er een map met dezelfde naam als de tarball, nu hierheen navigeren met de terminal (zie punt2) en vervolgens de commando's een voor een uitvoeren het beste kan je er sudo voorzetten, mocht je foutmeldingen krijgen is dat meestal over ontbrekende libs. Deze eerst installeren en dan weer verder. Er staan er ook wat genoemd op de site dus van te voren controleren of deze zijn geïnstalleerd.
2) We gaan het navigeren met de terminal overslaan, soms heb je het verkeerde pad of een spatie te veel o.i.d. Open Synaptic  zoeken op nautilus-open-terminal, vervolgens installeren.
Nu kan je met Nautilus navigeren naar een map en vervolgens links boven op Bestand klikken en een beetje onderaan staat "In terminal venster openen" en de terminal opent met het juiste pad commando's invoeren, sudo ervoor etc. Eenmalig even werk, maar later een hoop plezier van.  8) En kom je er toch niet uit post je maar weer.

Met vriendelijke groet,

Gijs


In der Beschränkung zeigt sich der Meister.

Offline chris.

  • Lid
    • http://www.linuxmintusers.be
  • Steunpunt: Nee
Re: imon vdf + remote
« Reactie #2 Gepost op: 2009/01/29, 20:42:36 »
super gijs,, ik denk dat het goed gegaan is?

even een copy paste van de terminal/stappen die ik gedaan heb:

root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon# aclocal; autoheader; autoconf; automake -a
Het programma 'aclocal' kan gevonden worden in de volgende pakketten:
 * automake
 * automake1.4
 * automake1.7
 * automake1.9
 * automake1.8
Probeer: apt-get install <geselecteerd pakket>
bash: aclocal: opdracht niet gevonden
Het programma 'autoheader' kan gevonden worden in de volgende pakketten:
 * autoconf
 * autoconf2.13
Probeer: apt-get install <geselecteerd pakket>
bash: autoheader: opdracht niet gevonden
Het programma 'autoconf' kan gevonden worden in de volgende pakketten:
 * autoconf
 * autoconf2.13
Probeer: apt-get install <geselecteerd pakket>
bash: autoconf: opdracht niet gevonden
Het programma 'automake' kan gevonden worden in de volgende pakketten:
 * automake
 * automake1.4
 * automake1.7
 * automake1.9
 * automake1.8
Probeer: apt-get install <geselecteerd pakket>
bash: automake: opdracht niet gevonden
root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon# ./configure
creating cache ./config.cache
checking for a BSD compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... missing
checking host system type... i686-pc-linux-gnu
checking whether to enable debugging... no
checking for gcc... gcc
checking whether the C compiler (gcc -Wall -O3 ) works... yes
checking whether the C compiler (gcc -Wall -O3 ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking how to run the C preprocessor... gcc -E
checking for a BSD compatible install... /usr/bin/install -c
checking for ranlib... ranlib
checking for gethostbyname... yes
checking for connect... yes
checking for inet_aton... yes
checking for kstat_open in -lkstat... no
checking for nanosleep in -lposix4... no
checking for getloadavg... yes
checking for swapctl... no
checking for procfs.h... no
checking for sys/procfs.h... yes
checking for sys/loadavg.h... no
checking for utmpx.h... yes
checking for kvm_open in -lkvm... no
checking for kvm_open in -lkvm with -lelf... no
checking for sched.h... yes
checking for sys/sched.h... no
checking for machine/cpufunc.h... no
checking for sys/types.h... yes
checking for machine/pio.h... no
checking for machine/sysarch.h... no
checking for sys/cpuvar.h... no
checking for System V IPC headers... yes
checking for union semun... no
checking for sched_setscheduler... yes
checking for sched_setscheduler in -lposix4... no
checking for sched_setscheduler in -lposix4... (cached) no
checking for sched_setscheduler in -lrt... yes
checking for sched_setscheduler in -lrt... (cached) yes
checking for i386_get_ioperm in -li386... no
checking for i386_get_ioperm in -li386... (cached) no
checking for i386_get_ioperm in -lc... no
checking for i386_get_ioperm in -lc... (cached) no
checking for ioperm... yes
checking for sys/io.h... yes
checking for sys/perm.h... yes
checking for unistd.h... yes
checking for a parallel port... yes
checking for dirent.h that defines DIR... yes
checking for opendir in -ldir... no
checking for ANSI C header files... yes
checking for fcntl.h... yes
checking for sys/ioctl.h... yes
checking for sys/time.h... yes
checking for errno.h... yes
checking for limits.h... yes
checking for kvm.h... no
checking for sys/param.h... yes
checking for sys/sysctl.h... yes
checking for sys/dkstat.h... no
checking for working const... yes
checking for inline... inline
checking for size_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for uid_t in sys/types.h... yes
checking whether gcc needs -traditional... no
checking return type of signal handlers... void
checking for select... yes
checking for socket... yes
checking for strdup... yes
checking for strerror... yes
checking for strtol... yes
checking for uname... yes
checking for cfmakeraw... yes
checking for your mounted filesystem table... /etc/mtab
checking for fcntl.h... (cached) yes
checking for sys/dustat.h... no
checking for sys/param.h... (cached) yes
checking for sys/statfs.h... yes
checking for sys/fstyp.h... no
checking for mnttab.h... no
checking for mntent.h... yes
checking for utime.h... yes
checking for sys/statvfs.h... yes
checking for sys/vfs.h... yes
checking for sys/mount.h... yes
checking for sys/filsys.h... no
checking for sys/fs_types.h... no
checking for getmntinfo... no
checking how to get filesystem space usage
checking for statvfs... yes
checking for which drivers to compile
checking for ncurses.h... no
checking for curses.h... no
checking for main in -lncurses... no
checking for main in -lcurses... no
configure: warning: The curses driver needs the curses (or ncurses) library.
checking for acs_map in curses.h... no
checking for _acs_char in curses.h... no
checking for redrawwin() in curses... no
checking for wcolor_set() in curses... no
Will compile drivers: lcdm001,mtxorb,cfontz,cwlnx,text,lb216,bayrad,glk,sgx120
updating cache ./config.cache
creating ./config.status
creating Makefile
creating shared/Makefile
creating server/Makefile
creating server/drivers/Makefile
creating clients/Makefile
creating clients/lcdproc/Makefile
creating clients/examples/Makefile
creating clients/headlines/Makefile
creating clients/metar/Makefile
creating docs/Makefile
creating docs/lcdproc-user/Makefile
creating docs/lcdproc-user/drivers/Makefile
creating scripts/Makefile
creating scripts/init-LCDd.debian
creating scripts/init-LCDd.rpm
creating scripts/init-lcdproc.debian
creating scripts/init-lcdproc.rpm
creating LCDproc.list
creating config.h
root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon# make
make  all-recursive
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon' wordt binnengegaan
Making all in shared
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt binnengegaan
gcc -DHAVE_CONFIG_H -I. -I. -I..     -Wall -O3 -c LL.c
gcc -DHAVE_CONFIG_H -I. -I. -I..     -Wall -O3 -c sockets.c
gcc -DHAVE_CONFIG_H -I. -I. -I..     -Wall -O3 -c str.c
gcc -DHAVE_CONFIG_H -I. -I. -I..     -Wall -O3 -c report.c
rm -f libLCDstuff.a
ar cru libLCDstuff.a LL.o sockets.o str.o report.o
ranlib libLCDstuff.a
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt verlaten
Making all in clients
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt binnengegaan
Making all in examples
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'all'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt verlaten
Making all in headlines
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'all'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt verlaten
Making all in lcdproc
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt binnengegaan
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../..    -Wall -O3 -c main.c
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../..    -Wall -O3 -c mode.c
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../..    -Wall -O3 -c batt.c
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../..    -Wall -O3 -c chrono.c
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../..    -Wall -O3 -c cpu.c
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../..    -Wall -O3 -c cpu_smp.c
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../..    -Wall -O3 -c disk.c
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../..    -Wall -O3 -c load.c
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../..    -Wall -O3 -c mem.c
gcc  -Wall -O3  -o lcdproc  main.o mode.o batt.o chrono.o cpu.o cpu_smp.o disk.o load.o mem.o ../../shared/libLCDstuff.a -lrt
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt verlaten
Making all in metar
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'all'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt verlaten
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'all-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt verlaten
Making all in server
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server' wordt binnengegaan
Making all in drivers
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server/drivers' wordt binnengegaan
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -I../..    -Wall -O3 -c lcd.c
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -I../..    -Wall -O3 -c lcd_lib.c
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -I../..    -Wall -O3 -c lcdm001.c
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -I../..    -Wall -O3 -c MtxOrb.c
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -I../..    -Wall -O3 -c CFontz.c
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -I../..    -Wall -O3 -c CwLnx.c
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -I../..    -Wall -O3 -c text.c
text.c: In functie ‘text_init’:
text.c:131: let op: pointer targets in assignment differ in signedness
text.c: Op bovenste niveau:
text.c:247: let op: ‘text_contrast’ defined but not used
text.c:253: let op: ‘text_backlight’ defined but not used
text.c:293: let op: ‘text_flush_box’ defined but not used
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -I../..    -Wall -O3 -c lb216.c
lb216.c:32:21: fout: curses.h: Bestand of map bestaat niet
lb216.c: In functie ‘LB216_init’:
lb216.c:191: let op: pointer targets in assignment differ in signedness
make[3]: *** [lb216.o] Fout 1
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server/drivers' wordt verlaten
make[2]: *** [all-recursive] Fout 1
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server' wordt verlaten
make[1]: *** [all-recursive] Fout 1
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon' wordt verlaten
make: *** [all-recursive-am] Fout 2
root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon# make install
Making install in shared
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt binnengegaan
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt binnengegaan
make[2]: Er hoeft niets gedaan te worden voor 'install-exec-am'.
make[2]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt verlaten
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt verlaten
Making install in clients
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt binnengegaan
Making install in examples
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt binnengegaan
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'install-exec-am'.
make[3]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt verlaten
Making install in headlines
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt binnengegaan
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt binnengegaan
/bin/sh ../../mkinstalldirs /usr/local/bin
 /usr/bin/install -c  lcdheadlines /usr/local/bin/lcdheadlines
make[3]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt verlaten
Making install in lcdproc
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt binnengegaan
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt binnengegaan
/bin/sh ../../mkinstalldirs /usr/local/bin
  /usr/bin/install -c  lcdproc /usr/local/bin/lcdproc
make[3]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt verlaten
Making install in metar
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt binnengegaan
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt binnengegaan
/bin/sh ../../mkinstalldirs /usr/local/bin
 /usr/bin/install -c  lcdmetar.pl /usr/local/bin/lcdmetar.pl
make[3]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt binnengegaan
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'install-exec-am'.
make[3]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt verlaten
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt verlaten
Making install in server
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server' wordt binnengegaan
Making install in drivers
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server/drivers' wordt binnengegaan
gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I./.. -I../..    -Wall -O3 -c lb216.c
lb216.c:32:21: fout: curses.h: Bestand of map bestaat niet
lb216.c: In functie ‘LB216_init’:
lb216.c:191: let op: pointer targets in assignment differ in signedness
make[2]: *** [lb216.o] Fout 1
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server/drivers' wordt verlaten
make[1]: *** [install-recursive] Fout 1
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server' wordt verlaten
make: *** [install-recursive] Fout 1
root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon# cp LCDd.conf /etc
root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon#


en nu zoeken waar ik heea kan instellen,,maar dat zal best ergens staan.

of is het de map die ik in /etc heb gezet als laatste stap?
dan zal ik daar ff kijken
« Laatst bewerkt op: 2009/01/31, 14:26:35 door chris »

Offline chris.

  • Lid
    • http://www.linuxmintusers.be
  • Steunpunt: Nee
Re: imon vdf + remote
« Reactie #3 Gepost op: 2009/01/30, 21:29:27 »
sorry voor de bump alvast

maar ik zit toch een beetje vast, ik heb geen idee waar te beginnen om het bestand aan te passen en twijfel toch of alles ook goed is gegaan.

het display zou toch "iets" moeten doen/teken van leven geven?  maar hij blijft zwart.

ook kan ik nergens in instellingen of uiterlijk iets vinden mbt deze drivers of imon of zelfs lirc.

mischien dat de lijst van LCDd.conf iets meer duidelikheid bied?

bij voorbaad sorry voor de lange lap tekst.

# LCDd.conf
#
# This file contains the configuration for the LCDd server.
#
# The format is ini-file-like. It is divided into sections that start at
# markers that look like [section]. Comments are all line-based comments,
# and are lines that start with '#' or ';'.
#
# The server has a 'central' section named [server]. Further each driver
# has a section which defines how the driver acts.
#
# The drivers are activated by specifiying them in a driver= line in the
# server section, like:
#
#   Driver=curses
#
# This tells LCDd to use the curses driver. The first driver that is
# loaded and is capable of output becomes 'the' output driver.
# All extra drivers can only serve as input.
# The default driver to use is curses.
#
# The drivers can read their own options from the config file, but most of
# them don't do this yet. They expect 'command-line'-format parameters that
# were previously placed on the command line. These parameters can be
# given to the driver in the following way:
#
#   Arguments="place arguments here"
#
# The arguments between the quotes are passed to the driver.
# As said before these are the same arguments that the driver would have
# been passed under the old command line format of
#
#   -d <driver> "<driverargs>"
#
# Note that the -d option still works, but not allows driverargs anymore.
# If -d is specified on the command line, the Driver= options in the
# config file are ignored.


[server]
# Server section with all kinds of settings for the LCDd server

Driver=imon
#Driver=curses
#Driver=HD44780
#Driver=lcdm001
#Driver=MtxOrb
#Driver=CFontz
#Driver=CwLnx
#Driver=Wirz-sli
#Driver=SGX120
#
# Tells the server to load the given drivers. Multiple lines can be given.
# NOTE: You may activate several input (input only) drivers but only ONE output
#       driver, which should be the first.

Bind=127.0.0.1
# Tells the driver to bind to the given interface

Port=13666
# Listen on this specified port; defaults to 13666.

#ReportLevel=5
# Sets the reporting level; defaults to 2 (warnings and errors only).

ReportToSyslog=no
# Should we report to syslog instead of stderr ? Default: no

WaitTime=5
# Sets the default time in seconds to displays a screen.

User=nobody
# User to run as.  LCDd will drop its root priviledges,
# if any, and run as this user instead.

ServerScreen=no
# Enables the built-in server screen [Default: no]
# yes      : always,
# no    : when there are no other screens active.

Foreground=no
# The server will stay in the foreground if set to true.
# Otherwise the server will fork to background and report
# to syslog

# TIP: The following options can also be modified from the
#      server menu (which requires a driver that supports input)

Heartbeat=open
# The server has serveral heartbeat modes
#   on    Stays on all the time
#   off   Stays off all the time
#   slash Rotating slash all the time
#   open  Can be controlled by all clients

InitialHeartbeat=on
# This sets the initial heartbeat state if the heartbeat mode is "open"
# Affects the server screen only ;)
#   on    Heartbeat activated
#   off   Heartbeat disabled
#   slash Heartbeat replaced with a rotating slash

Backlight=open
# The server has serveral backlight modes
#   on    Stays on all the time
#   off   Stays off all the time
#   open  Can be controlled by all clients

InitialBacklight=on
# This sets the initial backlight state if the backlight mode is "open"
# Affects the server screen only ;)

BacklightBrightness=255
# This sets the backlight brightness in state "on"
# NOTE: Not all drivers/devices support setting the brightness this
#       way. Some don't support switching the backlight on/off at all,
#       some can switch the backlight on or off only. If the latter is
#       the case BacklightBrightness must be > 0.


BacklightOffBrightness=0
# This sets the backlight brightness in state "off"
# NOTE: Not all drivers/devices support setting the brightness this
#       way. Some don't support switching the backlight on/off at all,
#       some can switch the backlight on or off only. If the latter is
#       the case BacklightBrightness must be = 0.


[input]
# Input section with settings that are related to input handling
# NOTE: Not all drivers have input functionality

# keypad settings
# Keyname      Function
#              Normal context              Menu context
# -------      --------------              ------------
#
# PauseKey     Pause/Continue              Enter/select
# BackKey      Back(Go to previous screen) Up/Left
# ForwardKey   Forward(Go to next screen)  Down/Right
# MainMenuKey  Open main menu              Exit/Cancel

#FreePauseKey=yes
# If set to yes, this prevents LCDd from handling the PauseKey itself

#FreeBackKey=yes
# If set to yes, this prevents LCDd from handling the BackKey itself

#FreeForwardKey=yes
# If set to yes, this prevents LCDd from handling the ForwardKey itself

#FreeMainMenuKey=no
# If set to yes, this prevents LCDd from handling the MainMenuKey itself
# TIP: Even if you "free" the above keys, you can still use the menu
#      provided you set FreeMainMenuKey=no



# Driver sections are below this line, in alphabetical order


[bayrad]
# EMAC BayRAD driver

Arguments="fill in here"

# -d --device Select the output device to use [/dev/lcd]
# -t --type Select the LCD type (size) [20x2]
# -s --speed Set the communication speed [19200]
# -h --help Show this help information



[CFontz]
# CrystalFontz driver

# Select the output device to use [/dev/lcd]
Device=/dev/ttyS0

# Select the LCD type (size) [20x4]
Size=20x4

# Set the initial contrast [140]
Contrast=140

# The backlight brightness settings are retrieved
# from the serversection now. And can therefore be
# modified from the server menu now.

# Set the communication speed [9600]
# possible values: 1200, 2400, 4800, 9600, 19200
Speed=9600

# Set the firmware version (New means >= 2.0) [no]
# if set, set Speed to 19200
NewFirmware=no

# Reinitialize the LCD's BIOS [no]
# normally you shouldn't need this
Reboot=no

# This is using the USB->serial driver [no]
#USB=no

[SGX120]
# Seetron SGX120-L driver

# Select the output device to use [/dev/lcd]
Device=/dev/ttyS0

# Select the LCD type (size) [20x4]
Size=20x4

# Set the communication speed [9600]
# possible values: 1200, 2400, 4800, 9600, 19200
Speed=9600

# Reinitialize the LCD's BIOS [no]
# normally you shouldn't need this
Reboot=no


[CwLnx]
# Cwlinux driver

# Select the output device to use [/dev/lcd]
#Device=/dev/ttyS0
Device=/dev/ttyUSB0

# Use this if using the USB version [no]
# Typical problem when you don't put yes is that the display
# show a growing line at the bottom of the LCD...
USB=yes

# Select the LCD type (size) [20x4]
Size=20x4

# Set the communication speed [9600]
# possible values: 9600, 19200
Speed=19200

# Reinitialize the LCD's BIOS [no]
# normally you shouldn't need this
Reboot=yes

# If you have a keypad connected [no]
Keypad=yes

# On fixed configuration LCD testing wich caracter each key generate
# is not usefull...
# However for testing purpose, or if you use custom made keypad.
# you can use keypad_test_mode=yes [no]
# Afterwards you can modify the settings again and set to no.
keypad_test_mode=no

# See [input] section for an explanation of the key mappings
#PauseKey=A
#BackKey=C
#ForwardKey=D
#MainMenuKey=B


[curses]
# Curses driver

# color settings

# foreground color [blue]
foreground=blue

# background color [cyan]
background=cyan

# backlight color [red]
backlight=red

# display size [20x4]
size=20x4

# What position (X,Y) to start the left top corner at...
# Default: (7,7)
topleftx=7
toplefty=7

# The current curses driver uses some features your curses
# implementation might handle incorrectly
# If you experience any problem with the output of screens
# that use vertical bars, please set the following to yes
#useoldvbarmap=yes



[GLK]
# Matrix Orbital GLK driver

# Set the output device to use [/dev/lcd]
device=/dev/lcd

# Set the initial contrast [140]
contrast=140

# Set the communication speed [19200]
speed=19200


[HD44780]
# Hitachi HD44780 driver
# See docs/hd44780_howto.txt

Port=0x378
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC

ConnectionType=4bit
# Select what type of connection. See documentation for types.

Keypad=no
# If you have a keypad connected. Keypad layout is currently not
# configureable from the config file.

Backlight=no
# If you have a switchable backlight.

Size=20x4
# Specifies the size of the LCD.
# In case of multiple combined displays, this should be the total size.

#vspan=1,2
# For multiple displays: at what 'logical' lines do the individual displays
# start.

#extended=yes
# If you want to use more than 3 HD44780 controllers on the LPT, you need to
# specify this. See documentation.

#DelayMult=2
# If your display is slow and cannot keep up with the flow of data from
# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
# to increase the delays. Default: 1.

DelayBus=true
# You can reduce the inserted delays by setting this to false.
# On fast PCs it is possible your LCD does not respond correctly.
# Default: true.

#Device=/dev/ttyS0
# For PIC-an-LCD connection type only: the serial device to which the LCD
# is connected. Default: /dev/lcd



[IrMan]
#IrMan driver

Arguments="fill in here"

# -d --device Select the input device to use
# -c --config Select the configuration file to use
# -h --help Show this help information



[joy]
# Joystick driver

Arguments="-d /dev/js0"

# -d --device Select the input device to use [/dev/js0]
# -a --axes Modify the axis map
# -b --buttons Modify the button map
# -h --help Show this help information



[LB216]
# LB216 driver

Arguments="-d /dev/ttyS0 -s 9600"

# -d --device Select the output device to use [/dev/lcd]
# -t --type Select the LCD type (size) [16x2]
# -b --brightness Set the initial brightness [255]
# -s --speed Set the communication speed [9600]
# -r --reboot Reinitialize the LCD's BIOS
# -h --help Show this help information;



[lcdm001]
# LCDM001 driver

Device=/dev/ttyS0

# See [input] section for an explanation of the key mappings

PauseKey=DownKey
BackKey=LeftKey
ForwardKey=RightKey
MainMenuKey=UpKey

# You can rearrange the settings here.
# If your device is broken, have a look at server/drivers/lcdm001.h

HBarWorkaround=yes
# This enables the workaround code that is neccessary to emulate
# the custom characters used for horizontal bar graphs
# (The device does not support real custom characters)

VBarWorkaround=yes
# This enables the workaround code that is neccessary to emulate
# the custom characters used for vertical bar graphs
# (The device does not support real custom characters)


[lircin]
# LIRC input driver

#lircrc=/etc/lircrc.lcdproc
# Specify an alternative location of the lircrc file, which is
# normally ~/.lircrc

#prog=lcdd
# Must be the same as in your lircrc


[MtxOrb]
# Matrix Orbital driver

# Select the output device to use [/dev/lcd]
device=/dev/lcd

# Set the display size [20x4]
size=20x4

# Switch on the backlight? [yes]
# NOTE: The driver will ignore this if the display
#       is a vfd or vfd as they crash if the backlight
#       is turned off
enablebacklight=yes

# Set the initial contrast [140]
# NOTE: The driver will ignore this if the display
#       is a vfd or vfd as they don't have this feature
contrast=140

# Set the communication speed [19200]
speed=19200

# Set the display type [lcd]
# Possible settings: lcd, lkd, vfd, vkd
type=lcd

# See [input] section for an explanation of the key mappings

PauseKey=N
BackKey=K
ForwardKey=A
MainMenuKey=F

# You can find out which key of your display sends which
# character by setting keypad_test_mode to yes and running
# LCDd. LCDd will output all characters it receives.
# Afterwards you can modify the settings above and set
# keypad_set_mode to no again.

keypad_test_mode=no

[SED1330]
# Seiko Epson 1330 driver

Port=0x378
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC

Type=G321D
#Type=G121C
#Type=G242C
# Type of LCD module. G321D is the only one that is tested currently.



[SED1520]
# Seiko Epson 1520 driver

Port=0x378
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC


[stv5730]
# stv5730 driver

Port=0x378
# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC

Mode=0
# Select Mode: 0=auto detect 1=full page mode 2=mixed mode

VidSys=1
# Select Video System: 1=PAL 2=NTSC

ZoomFirst=1
# Zoom First Line: 1=yes 0=no

#Select Color:
# 0=Black 1=Blue 2=Green 3=Cyan 4=Red 5=Magenta 6=Yellow 7=White
ColFline=4
# Color of first line text
ColText=1
# Color of text
ColCback=3
# Color of Character Background
ColCbord=0
# Color of Character Border
ColSback=2
# Color of Screen Background


[svgalib]
# SVGAlib driver

# No options



[T6963]
# Toshiba T6963 driver

Arguments="fill in here"

# -p --port Select the output port to use [0x378]
# -t --type Select the LCD type (size) [20x6]
# -h --help Show this help information



[text]
# Text driver

# display size [20x4]
size=20x4

[imon]
# Ahanix/Soundgraph IMON driver

Size=16x2
Device=/dev/lcd0


[Wirz-sli]
# Wirz SLI LCD driver

Arguments="-d /dev/ttyS0 -s 19200"

# -d --device Select the output device to use [/dev/lcd]
# -s --speed Set the communication speed [19200]
# -h --help Show this help information
« Laatst bewerkt op: 2009/01/31, 14:27:03 door chris »

Offline Gijsbert

  • Lid
  • Steunpunt: Ja
Re: imon vdf + remote
« Reactie #4 Gepost op: 2009/01/31, 12:16:12 »
Chris, zou je de "lappen" tekst tussen tags kunnen zetten? Dat doe je zo (code)Lap tekst(/code)
de () vervangen door deze []. Ik moet helaas nu weg, kom later er op terug voor de installatie.

Met vriendelijke groet,

Gijs
In der Beschränkung zeigt sich der Meister.

Offline chris.

  • Lid
    • http://www.linuxmintusers.be
  • Steunpunt: Nee
Re: imon vdf + remote
« Reactie #5 Gepost op: 2009/01/31, 14:27:44 »
done ,, :)

en alvast bedankt,,,

Offline Gijsbert

  • Lid
  • Steunpunt: Ja
Re: imon vdf + remote
« Reactie #6 Gepost op: 2009/01/31, 18:16:29 »
Aan het begin van je eerste post over de installatie, wordt aangegeven dat je nog pakketten moet installeren.
Dit zou ik eerst doen en daarna de installatie opnieuw uitvoeren. Bijv dit pakket:
Het programma 'aclocal' kan gevonden worden in de volgende pakketten:
 * automake
 * automake1.4
 * automake1.7
 * automake1.9
 * automake1.8
Probeer: apt-get install <geselecteerd pakket>
bash: aclocal: opdracht niet gevondenl <geselecteerd pakket>
Een terminal openen en dit intypen sudo apt-get install automake ENTER ww invullen ENTER. Zorg wel dat Synaptic of een andere pakket manager niet actief is, anders lukt het niet. Zo ook voor de andere pakketten die je mist. Kan je na de installatie van het programmaatje je terminal terminal output hier plaatsen? Kan ik of een ander zien of alles goed gegaan is.

Met vriendelijke groet,

Gijs
In der Beschränkung zeigt sich der Meister.

Offline chris.

  • Lid
    • http://www.linuxmintusers.be
  • Steunpunt: Nee
Re: imon vdf + remote
« Reactie #7 Gepost op: 2009/01/31, 21:12:57 »
alles gedaan en de pakketten zijn bijgewerkt wat ik zo zag,,

root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon# aclocal; autoheader; autoconf; automake -a
acinclude.m4:1: warning: underquoted definition of LCD_DRIVERS_SELECT
acinclude.m4:1:   run info '(automake)Extending aclocal'
acinclude.m4:1:   or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader: [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
clients/lcdproc/Makefile.am: installing `./depcomp'
root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
/home/chris/Bureaublad/lcdproc-0.4.5-imon/missing: Unknown `--run' option
Try `/home/chris/Bureaublad/lcdproc-0.4.5-imon/missing --help' for more information
configure: WARNING: `missing' script is too old or missing
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking whether to enable debugging... no
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for a BSD-compatible install... /usr/bin/install -c
checking for ranlib... ranlib
checking for gethostbyname... yes
checking for connect... yes
checking for inet_aton... yes
checking for kstat_open in -lkstat... no
checking for nanosleep in -lposix4... no
checking for getloadavg... yes
checking for swapctl... no
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking procfs.h usability... no
checking procfs.h presence... no
checking for procfs.h... no
checking sys/procfs.h usability... yes
checking sys/procfs.h presence... yes
checking for sys/procfs.h... yes
checking sys/loadavg.h usability... no
checking sys/loadavg.h presence... no
checking for sys/loadavg.h... no
checking utmpx.h usability... yes
checking utmpx.h presence... yes
checking for utmpx.h... yes
checking for kvm_open in -lkvm... no
checking for kvm_open in -lkvm with -lelf... no
checking sched.h usability... yes
checking sched.h presence... yes
checking for sched.h... yes
checking sys/sched.h usability... no
checking sys/sched.h presence... no
checking for sys/sched.h... no
checking machine/cpufunc.h usability... no
checking machine/cpufunc.h presence... no
checking for machine/cpufunc.h... no
checking for sys/types.h... (cached) yes
checking machine/pio.h usability... no
checking machine/pio.h presence... no
checking for machine/pio.h... no
checking machine/sysarch.h usability... no
checking machine/sysarch.h presence... no
checking for machine/sysarch.h... no
checking sys/cpuvar.h usability... no
checking sys/cpuvar.h presence... no
checking for sys/cpuvar.h... no
checking for System V IPC headers... yes
checking for union semun... no
checking for sched_setscheduler... yes
checking for sched_setscheduler in -lposix4... no
checking for sched_setscheduler in -lposix4... (cached) no
checking for sched_setscheduler in -lrt... yes
checking for sched_setscheduler in -lrt... (cached) yes
checking for i386_get_ioperm in -li386... no
checking for i386_get_ioperm in -li386... (cached) no
checking for i386_get_ioperm in -lc... no
checking for i386_get_ioperm in -lc... (cached) no
checking for ioperm... yes
checking sys/io.h usability... yes
checking sys/io.h presence... yes
checking for sys/io.h... yes
checking sys/perm.h usability... yes
checking sys/perm.h presence... yes
checking for sys/perm.h... yes
checking for unistd.h... (cached) yes
checking for a parallel port... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking kvm.h usability... no
checking kvm.h presence... no
checking for kvm.h... no
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking sys/sysctl.h usability... yes
checking sys/sysctl.h presence... yes
checking for sys/sysctl.h... yes
checking sys/dkstat.h usability... no
checking sys/dkstat.h presence... no
checking for sys/dkstat.h... no
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for size_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for uid_t in sys/types.h... yes
checking whether gcc needs -traditional... no
checking return type of signal handlers... void
checking for select... yes
checking for socket... yes
checking for strdup... yes
checking for strerror... yes
checking for strtol... yes
checking for uname... yes
checking for cfmakeraw... yes
checking for your mounted filesystem table... /etc/mtab
checking for fcntl.h... (cached) yes
checking sys/dustat.h usability... no
checking sys/dustat.h presence... no
checking for sys/dustat.h... no
checking for sys/param.h... (cached) yes
checking sys/statfs.h usability... yes
checking sys/statfs.h presence... yes
checking for sys/statfs.h... yes
checking sys/fstyp.h usability... no
checking sys/fstyp.h presence... no
checking for sys/fstyp.h... no
checking mnttab.h usability... no
checking mnttab.h presence... no
checking for mnttab.h... no
checking mntent.h usability... yes
checking mntent.h presence... yes
checking for mntent.h... yes
checking utime.h usability... yes
checking utime.h presence... yes
checking for utime.h... yes
checking sys/statvfs.h usability... yes
checking sys/statvfs.h presence... yes
checking for sys/statvfs.h... yes
checking sys/vfs.h usability... yes
checking sys/vfs.h presence... yes
checking for sys/vfs.h... yes
checking sys/mount.h usability... yes
checking sys/mount.h presence... yes
checking for sys/mount.h... yes
checking sys/filsys.h usability... no
checking sys/filsys.h presence... no
checking for sys/filsys.h... no
checking sys/fs_types.h usability... no
checking sys/fs_types.h presence... no
checking for sys/fs_types.h... no
checking for getmntinfo... no
configure: checking how to get filesystem space usage...
checking for statvfs... yes
configure: checking for which drivers to compile...
checking ncurses.h usability... no
checking ncurses.h presence... no
checking for ncurses.h... no
checking curses.h usability... no
checking curses.h presence... no
checking for curses.h... no
checking for main in -lncurses... no
checking for main in -lcurses... no
configure: WARNING: The curses driver needs the curses (or ncurses) library.
checking for acs_map in curses.h... no
checking for _acs_char in curses.h... no
checking for redrawwin() in curses... no
checking for wcolor_set() in curses... no
Will compile drivers: lcdm001,mtxorb,cfontz,cwlnx,text,lb216,bayrad,glk,sgx120,imon
configure: creating ./config.status
config.status: creating Makefile
config.status: creating shared/Makefile
config.status: creating server/Makefile
config.status: creating server/drivers/Makefile
config.status: creating clients/Makefile
config.status: creating clients/lcdproc/Makefile
config.status: creating clients/examples/Makefile
config.status: creating clients/headlines/Makefile
config.status: creating clients/metar/Makefile
config.status: creating docs/Makefile
config.status: creating docs/lcdproc-user/Makefile
config.status: creating docs/lcdproc-user/drivers/Makefile
config.status: creating scripts/Makefile
config.status: creating scripts/init-LCDd.debian
config.status: creating scripts/init-LCDd.rpm
config.status: creating scripts/init-lcdproc.debian
config.status: creating scripts/init-lcdproc.rpm
config.status: creating LCDproc.list
config.status: WARNING:  LCDproc.list.in seems to ignore the --datarootdir setting
config.status: creating config.h
config.status: executing depfiles commands
root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon# make
make  all-recursive
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon' wordt binnengegaan
Making all in shared
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt binnengegaan
make[2]: Er hoeft niets gedaan te worden voor 'all'.
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt verlaten
Making all in clients
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt binnengegaan
Making all in examples
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'all'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt verlaten
Making all in headlines
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'all'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt verlaten
Making all in lcdproc
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'all'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt verlaten
Making all in metar
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'all'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt verlaten
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'all-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt verlaten
Making all in server
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server' wordt binnengegaan
Making all in drivers
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server/drivers' wordt binnengegaan
gcc -DHAVE_CONFIG_H -I. -I../.. -I./.. -I../..    -Wall -O3 -MT lb216.o -MD -MP -MF .deps/lb216.Tpo -c -o lb216.o lb216.c
lb216.c:32:21: fout: curses.h: Bestand of map bestaat niet
lb216.c: In functie ‘LB216_init’:
lb216.c:191: let op: pointer targets in assignment differ in signedness
make[3]: *** [lb216.o] Fout 1
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server/drivers' wordt verlaten
make[2]: *** [all-recursive] Fout 1
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server' wordt verlaten
make[1]: *** [all-recursive] Fout 1
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon' wordt verlaten
make: *** [all] Fout 2
root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon# make install
Making install in shared
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt binnengegaan
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt binnengegaan
make[2]: Er hoeft niets gedaan te worden voor 'install-exec-am'.
make[2]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt verlaten
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt verlaten
Making install in clients
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt binnengegaan
Making install in examples
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt binnengegaan
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'install-exec-am'.
make[3]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt verlaten
Making install in headlines
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt binnengegaan
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt binnengegaan
test -z "/usr/local/bin" || /bin/mkdir -p "/usr/local/bin"
 /usr/bin/install -c 'lcdheadlines' '/usr/local/bin/lcdheadlines'
make[3]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt verlaten
Making install in lcdproc
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt binnengegaan
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt binnengegaan
test -z "/usr/local/bin" || /bin/mkdir -p "/usr/local/bin"
  /usr/bin/install -c 'lcdproc' '/usr/local/bin/lcdproc'
make[3]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt verlaten
Making install in metar
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt binnengegaan
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt binnengegaan
test -z "/usr/local/bin" || /bin/mkdir -p "/usr/local/bin"
 /usr/bin/install -c 'lcdmetar.pl' '/usr/local/bin/lcdmetar.pl'
make[3]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt binnengegaan
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'install-exec-am'.
make[3]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt verlaten
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt verlaten
Making install in server
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server' wordt binnengegaan
Making install in drivers
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server/drivers' wordt binnengegaan
gcc -DHAVE_CONFIG_H -I. -I../.. -I./.. -I../..    -Wall -O3 -MT lb216.o -MD -MP -MF .deps/lb216.Tpo -c -o lb216.o lb216.c
lb216.c:32:21: fout: curses.h: Bestand of map bestaat niet
lb216.c: In functie ‘LB216_init’:
lb216.c:191: let op: pointer targets in assignment differ in signedness
make[2]: *** [lb216.o] Fout 1
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server/drivers' wordt verlaten
make[1]: *** [install-recursive] Fout 1
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server' wordt verlaten
make: *** [install-recursive] Fout 1
root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon# /etc (cp LCDd.conf /etc
bash: syntaxfout nabij onverwacht symbool 'cp'
root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon#
« Laatst bewerkt op: 2009/01/31, 21:18:18 door chris »

Offline Gijsbert

  • Lid
  • Steunpunt: Ja
Re: imon vdf + remote
« Reactie #8 Gepost op: 2009/01/31, 23:38:41 »
Chris het laatste commando, make install, daar moet sudo voor, anders heb je geen rechten om te installeren, dus sudo make install  Het commando cp zet daar ook sudo voor.
configure: WARNING: The curses driver needs the curses (or ncurses) library. heb je ncurses geinstlaleerd? Even zoeken in Synaptic op libncurses5 en installeren.
Valt niet mee,he? dat compileren, je bent in iedergeval goed bezig, gewoon even doorzetten. :)

Met vriendelijke groet,

Gijs
« Laatst bewerkt op: 2009/01/31, 23:49:09 door Gijsbert »
In der Beschränkung zeigt sich der Meister.

Offline chris.

  • Lid
    • http://www.linuxmintusers.be
  • Steunpunt: Nee
Re: imon vdf + remote
« Reactie #9 Gepost op: 2009/02/01, 00:30:27 »
doorzetten ben ik goed in hoor maar,,,

moet ik het hele riedeltje weer van begin af aan doen dan,, geen probleem hoor maar ik wil niet iets in de war schoppen.

libncurses5 heb ik al geinstalleerd ,, afgezien van de  dbg en dev versies [debug en developer?] dus dat is in orde neem ik aan?
« Laatst bewerkt op: 2009/02/01, 00:36:13 door chris »

Offline chris.

  • Lid
    • http://www.linuxmintusers.be
  • Steunpunt: Nee
Re: imon vdf + remote
« Reactie #10 Gepost op: 2009/02/01, 00:50:16 »
en wel vreemd dat ik heea als root open in een terminal en nog sudo moet gebruiken,, maar ik ga het gewoon proberen.

wish me luck :)

Offline chris.

  • Lid
    • http://www.linuxmintusers.be
  • Steunpunt: Nee
Re: imon vdf + remote
« Reactie #11 Gepost op: 2009/02/01, 00:56:04 »
done:

root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon# aclocal; autoheader; autoconf; automake -a
acinclude.m4:1: warning: underquoted definition of LCD_DRIVERS_SELECT
acinclude.m4:1:   run info '(automake)Extending aclocal'
acinclude.m4:1:   or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader: [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
/home/chris/Bureaublad/lcdproc-0.4.5-imon/missing: Unknown `--run' option
Try `/home/chris/Bureaublad/lcdproc-0.4.5-imon/missing --help' for more information
configure: WARNING: `missing' script is too old or missing
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking whether to enable debugging... no
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for a BSD-compatible install... /usr/bin/install -c
checking for ranlib... ranlib
checking for gethostbyname... yes
checking for connect... yes
checking for inet_aton... yes
checking for kstat_open in -lkstat... no
checking for nanosleep in -lposix4... no
checking for getloadavg... yes
checking for swapctl... no
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking procfs.h usability... no
checking procfs.h presence... no
checking for procfs.h... no
checking sys/procfs.h usability... yes
checking sys/procfs.h presence... yes
checking for sys/procfs.h... yes
checking sys/loadavg.h usability... no
checking sys/loadavg.h presence... no
checking for sys/loadavg.h... no
checking utmpx.h usability... yes
checking utmpx.h presence... yes
checking for utmpx.h... yes
checking for kvm_open in -lkvm... no
checking for kvm_open in -lkvm with -lelf... no
checking sched.h usability... yes
checking sched.h presence... yes
checking for sched.h... yes
checking sys/sched.h usability... no
checking sys/sched.h presence... no
checking for sys/sched.h... no
checking machine/cpufunc.h usability... no
checking machine/cpufunc.h presence... no
checking for machine/cpufunc.h... no
checking for sys/types.h... (cached) yes
checking machine/pio.h usability... no
checking machine/pio.h presence... no
checking for machine/pio.h... no
checking machine/sysarch.h usability... no
checking machine/sysarch.h presence... no
checking for machine/sysarch.h... no
checking sys/cpuvar.h usability... no
checking sys/cpuvar.h presence... no
checking for sys/cpuvar.h... no
checking for System V IPC headers... yes
checking for union semun... no
checking for sched_setscheduler... yes
checking for sched_setscheduler in -lposix4... no
checking for sched_setscheduler in -lposix4... (cached) no
checking for sched_setscheduler in -lrt... yes
checking for sched_setscheduler in -lrt... (cached) yes
checking for i386_get_ioperm in -li386... no
checking for i386_get_ioperm in -li386... (cached) no
checking for i386_get_ioperm in -lc... no
checking for i386_get_ioperm in -lc... (cached) no
checking for ioperm... yes
checking sys/io.h usability... yes
checking sys/io.h presence... yes
checking for sys/io.h... yes
checking sys/perm.h usability... yes
checking sys/perm.h presence... yes
checking for sys/perm.h... yes
checking for unistd.h... (cached) yes
checking for a parallel port... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking kvm.h usability... no
checking kvm.h presence... no
checking for kvm.h... no
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking sys/sysctl.h usability... yes
checking sys/sysctl.h presence... yes
checking for sys/sysctl.h... yes
checking sys/dkstat.h usability... no
checking sys/dkstat.h presence... no
checking for sys/dkstat.h... no
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for size_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for uid_t in sys/types.h... yes
checking whether gcc needs -traditional... no
checking return type of signal handlers... void
checking for select... yes
checking for socket... yes
checking for strdup... yes
checking for strerror... yes
checking for strtol... yes
checking for uname... yes
checking for cfmakeraw... yes
checking for your mounted filesystem table... /etc/mtab
checking for fcntl.h... (cached) yes
checking sys/dustat.h usability... no
checking sys/dustat.h presence... no
checking for sys/dustat.h... no
checking for sys/param.h... (cached) yes
checking sys/statfs.h usability... yes
checking sys/statfs.h presence... yes
checking for sys/statfs.h... yes
checking sys/fstyp.h usability... no
checking sys/fstyp.h presence... no
checking for sys/fstyp.h... no
checking mnttab.h usability... no
checking mnttab.h presence... no
checking for mnttab.h... no
checking mntent.h usability... yes
checking mntent.h presence... yes
checking for mntent.h... yes
checking utime.h usability... yes
checking utime.h presence... yes
checking for utime.h... yes
checking sys/statvfs.h usability... yes
checking sys/statvfs.h presence... yes
checking for sys/statvfs.h... yes
checking sys/vfs.h usability... yes
checking sys/vfs.h presence... yes
checking for sys/vfs.h... yes
checking sys/mount.h usability... yes
checking sys/mount.h presence... yes
checking for sys/mount.h... yes
checking sys/filsys.h usability... no
checking sys/filsys.h presence... no
checking for sys/filsys.h... no
checking sys/fs_types.h usability... no
checking sys/fs_types.h presence... no
checking for sys/fs_types.h... no
checking for getmntinfo... no
configure: checking how to get filesystem space usage...
checking for statvfs... yes
configure: checking for which drivers to compile...
checking ncurses.h usability... no
checking ncurses.h presence... no
checking for ncurses.h... no
checking curses.h usability... no
checking curses.h presence... no
checking for curses.h... no
checking for main in -lncurses... no
checking for main in -lcurses... no
configure: WARNING: The curses driver needs the curses (or ncurses) library.
checking for acs_map in curses.h... no
checking for _acs_char in curses.h... no
checking for redrawwin() in curses... no
checking for wcolor_set() in curses... no
Will compile drivers: lcdm001,mtxorb,cfontz,cwlnx,text,lb216,bayrad,glk,sgx120,imon
configure: creating ./config.status
config.status: creating Makefile
config.status: creating shared/Makefile
config.status: creating server/Makefile
config.status: creating server/drivers/Makefile
config.status: creating clients/Makefile
config.status: creating clients/lcdproc/Makefile
config.status: creating clients/examples/Makefile
config.status: creating clients/headlines/Makefile
config.status: creating clients/metar/Makefile
config.status: creating docs/Makefile
config.status: creating docs/lcdproc-user/Makefile
config.status: creating docs/lcdproc-user/drivers/Makefile
config.status: creating scripts/Makefile
config.status: creating scripts/init-LCDd.debian
config.status: creating scripts/init-LCDd.rpm
config.status: creating scripts/init-lcdproc.debian
config.status: creating scripts/init-lcdproc.rpm
config.status: creating LCDproc.list
config.status: WARNING:  LCDproc.list.in seems to ignore the --datarootdir setting
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon# sudo make
make  all-recursive
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon' wordt binnengegaan
Making all in shared
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt binnengegaan
make[2]: Er hoeft niets gedaan te worden voor 'all'.
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt verlaten
Making all in clients
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt binnengegaan
Making all in examples
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'all'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt verlaten
Making all in headlines
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'all'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt verlaten
Making all in lcdproc
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'all'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt verlaten
Making all in metar
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'all'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt verlaten
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'all-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt verlaten
Making all in server
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server' wordt binnengegaan
Making all in drivers
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server/drivers' wordt binnengegaan
gcc -DHAVE_CONFIG_H -I. -I../.. -I./.. -I../..    -Wall -O3 -MT lb216.o -MD -MP -MF .deps/lb216.Tpo -c -o lb216.o lb216.c
lb216.c:32:21: fout: curses.h: Bestand of map bestaat niet
lb216.c: In functie ‘LB216_init’:
lb216.c:191: let op: pointer targets in assignment differ in signedness
make[3]: *** [lb216.o] Fout 1
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server/drivers' wordt verlaten
make[2]: *** [all-recursive] Fout 1
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server' wordt verlaten
make[1]: *** [all-recursive] Fout 1
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon' wordt verlaten
make: *** [all] Fout 2
root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon# sudo make install
Making install in shared
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt binnengegaan
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt binnengegaan
make[2]: Er hoeft niets gedaan te worden voor 'install-exec-am'.
make[2]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt verlaten
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/shared' wordt verlaten
Making install in clients
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt binnengegaan
Making install in examples
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt binnengegaan
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'install-exec-am'.
make[3]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/examples' wordt verlaten
Making install in headlines
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt binnengegaan
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt binnengegaan
test -z "/usr/local/bin" || /bin/mkdir -p "/usr/local/bin"
 /usr/bin/install -c 'lcdheadlines' '/usr/local/bin/lcdheadlines'
make[3]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/headlines' wordt verlaten
Making install in lcdproc
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt binnengegaan
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt binnengegaan
test -z "/usr/local/bin" || /bin/mkdir -p "/usr/local/bin"
  /usr/bin/install -c 'lcdproc' '/usr/local/bin/lcdproc'
make[3]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/lcdproc' wordt verlaten
Making install in metar
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt binnengegaan
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt binnengegaan
test -z "/usr/local/bin" || /bin/mkdir -p "/usr/local/bin"
 /usr/bin/install -c 'lcdmetar.pl' '/usr/local/bin/lcdmetar.pl'
make[3]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients/metar' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt binnengegaan
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt binnengegaan
make[3]: Er hoeft niets gedaan te worden voor 'install-exec-am'.
make[3]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[3]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt verlaten
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt verlaten
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/clients' wordt verlaten
Making install in server
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server' wordt binnengegaan
Making install in drivers
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server/drivers' wordt binnengegaan
gcc -DHAVE_CONFIG_H -I. -I../.. -I./.. -I../..    -Wall -O3 -MT lb216.o -MD -MP -MF .deps/lb216.Tpo -c -o lb216.o lb216.c
lb216.c:32:21: fout: curses.h: Bestand of map bestaat niet
lb216.c: In functie ‘LB216_init’:
lb216.c:191: let op: pointer targets in assignment differ in signedness
make[2]: *** [lb216.o] Fout 1
make[2]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server/drivers' wordt verlaten
make[1]: *** [install-recursive] Fout 1
make[1]: Map '/home/chris/Bureaublad/lcdproc-0.4.5-imon/server' wordt verlaten
make: *** [install-recursive] Fout 1
root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon# sudo cp LCDd.conf /etc
root@ubuntu-main:/home/chris/Bureaublad/lcdproc-0.4.5-imon#

in orde neem ik aan?

[[ik wou dat ik wist wat ik deed,, maar ooit krijg ik het door ]]


Offline Gijsbert

  • Lid
  • Steunpunt: Ja
Re: imon vdf + remote
« Reactie #12 Gepost op: 2009/02/01, 16:09:03 »
en wel vreemd dat ik heea als root open in een terminal en nog sudo moet gebruiken,, maar ik ga het gewoon proberen.

wish me luck :)
Als je als root een terminal opent en je wachtwoord moet opgeven dan hoeft sudo niet, ik ging er echter vanuit dat je een gewone terminal opende.  :(
Citaat van: chris
libncurses5 heb ik al geinstalleerd ,, afgezien van de  dbg en dev versies [debug en developer?] dus dat is in orde neem ik aan?
Ja dat zou in orde moeten zijn.
Citaat van: chris
in orde neem ik aan?
Niet helemaal deze laatste regel vind ik niet zo fijn
make: *** [install-recursive] Fout 1. Waarschijnlijk doet je afstand bediener het nog niet? Doet je display het wel? ik weet niet of je deze met het toesenbord kan bedienen?
Kijk hier eens http://members.home.nl/g8m/linux/debian/eos.html op de pagina zoeken op imon, misschien heb je er nog iets aan. Verder staat in Synaptic lirc-modules-source hierin wordt bij de drivers imon genoemt, je zou deze kunnen installeren, na installatie wel even opnieuw opstarten. Ik hoop dat je zo iets verder komt.

Met vriendelijke groet,

Gijs
« Laatst bewerkt op: 2009/02/01, 16:18:36 door Gijsbert »
In der Beschränkung zeigt sich der Meister.

Offline chris.

  • Lid
    • http://www.linuxmintusers.be
  • Steunpunt: Nee
Re: imon vdf + remote
« Reactie #13 Gepost op: 2009/02/01, 17:31:10 »
nope het display doet het idd nog niet,, en dat is ook het belangrijkste voor mij,,daar begon het om.

de lirc-modules-source stonden al geinstalleerd,, die had ik bij een eerder probeersel al gebruikt.

en in de link neem ik aan dat je dit stuk bedoelt:

eos:/home/evil/lcd# cd lirc*
eos:/home/evil/lcd/lirc-0.8.2# ls -l

total 2144
-rw-r--r--  1 evil evil   5433 2007-05-06 11:46 acconfig.h
-rw-r--r--  1 evil evil   2463 2007-01-16 11:26 acinclude.m4
-rw-r--r--  1 evil evil 241402 2007-06-09 21:35 aclocal.m4
-rw-r--r--  1 evil evil   2103 2007-06-09 20:54 ANNOUNCE
-rw-r--r--  1 evil evil   1483 2005-12-17 14:44 AUTHORS
-rw-r--r--  1 evil evil 157683 2007-06-09 21:39 ChangeLog
-rwxr-xr-x  1 evil evil   3057 2005-02-06 07:21 compile
-rwxr-xr-x  1 evil evil  43830 2007-06-09 21:35 config.guess
-rw-r--r--  1 evil evil  10210 2008-01-10 16:18 config.h
-rw-r--r--  1 evil evil   9806 2007-06-09 21:36 config.h.in
-rw-r--r--  1 evil evil  74950 2008-01-10 16:18 config.log
-rwxr-xr-x  1 evil evil  45925 2008-01-10 16:18 config.status
-rwxr-xr-x  1 evil evil  31544 2007-06-09 21:35 config.sub
-rwxr-xr-x  1 evil evil 854853 2007-06-09 21:36 configure
-rw-r--r--  1 evil evil  37658 2007-06-09 20:54 configure.in
-rwxr-xr-x  1 evil evil    168 2008-01-10 16:18 configure.sh
drwxr-xr-x  2 evil evil   4096 2007-06-09 21:39 contrib
-rw-r--r--  1 evil evil  18007 1999-04-29 23:30 COPYING
drwxr-xr-x  4 evil evil   4096 2008-01-10 16:58 daemons
-rwxr-xr-x  1 evil evil   4287 2006-04-09 05:59 data2setup.sh
drwxr-xr-x  3 evil evil   4096 2008-01-10 16:48 debian
-rwxr-xr-x  1 evil evil  12123 2005-02-06 07:21 depcomp
drwxr-xr-x  7 evil evil   4096 2008-01-10 16:58 doc
drwxr-xr-x 19 evil evil   4096 2008-01-10 16:18 drivers
-rw-r--r--  1 evil evil   8603 2002-01-22 10:52 INSTALL
-rwxr-xr-x  1 evil evil   6376 2005-02-06 07:21 install-sh
-rwxr-xr-x  1 evil evil 204574 2008-01-10 16:18 libtool
-rw-r--r--  1 evil evil 184058 2007-06-09 21:35 ltmain.sh
-rw-r--r--  1 evil evil  15478 2008-01-10 16:18 Makefile
-rw-r--r--  1 evil evil    979 2003-05-07 18:31 Makefile.am
-rw-r--r--  1 evil evil  15432 2007-06-09 21:35 Makefile.in
-rwxr-xr-x  1 evil evil  10270 2005-02-06 07:21 missing
-rwxr-xr-x  1 evil evil   1801 2005-02-06 07:21 mkinstalldirs
-rw-r--r--  1 evil evil  17992 2007-06-09 20:54 NEWS
-rw-r--r--  1 evil evil    880 2002-01-22 10:52 README
drwxr-xr-x 42 evil evil   4096 2007-06-09 21:39 remotes
-rw-r--r--  1 evil evil   8160 2007-05-26 15:30 setup.data
-rw-r--r--  1 evil evil  21237 2007-06-09 21:36 setup-driver.sh
-rwxr-xr-x  1 evil evil  15298 2007-06-09 20:54 setup.sh
-rw-r--r--  1 evil evil     23 2008-01-10 16:18 stamp-h1
-rw-r--r--  1 evil evil    833 2007-05-05 14:36 TODO
drwxr-xr-x  4 evil evil   4096 2008-01-10 16:58 tools



eos:/home/evil/lcd/lirc-0.8.2# patch -p1 < ../lirc-0.8.2-imonlcd-0.1.patch
eos:/home/evil/lcd/lirc-0.8.2# apt-get install dialog
eos:/home/evil/lcd/lirc-0.8.2# ./setup.sh

Kies de eerste optie in het menu, kies vervolgens usb-devices, en selecteer "Soundgraph iMON MultiMedian IR/VFD". Kies "Save & run configure".

eos:/home/evil/lcd/lirc-0.8.2# make

maar daar ben je me echt even kwijt,,
kan ik deze commando's zo in de terminal rammen of moet ik alleen een deel nemen en met ubuntu comando's aanvullen?

Offline Gijsbert

  • Lid
  • Steunpunt: Ja
Re: imon vdf + remote
« Reactie #14 Gepost op: 2009/02/01, 19:56:21 »
Ik zou eerder deze site volgen http://codeka.com/blogs/index.php/2007/09/26/imon_lcd_patch_v0_3?blog=5 Ook LIRC 0.8.3 downloaden gebruiken ze nl in de documentatie.
Kijk eerst of je hier wat mee kan, kom je er niet uit post je maar weer.

Met vriendelijke groet,

Gijs
In der Beschränkung zeigt sich der Meister.

Offline chris.

  • Lid
    • http://www.linuxmintusers.be
  • Steunpunt: Nee
Re: imon vdf + remote
« Reactie #15 Gepost op: 2009/02/01, 20:50:01 »
nou ik denk dat ik het maar opgeef,,

bedankt voor al je moeite hoor,,aan jou ligt het niet,
maar ook hier kom ik niet wijs uit.

en nou weet ik wel,, een keer booten in xp en het display doet het weer [het gaat me echt om de look van de kast, dus text in het display] ook onder ubuntu als de stroom er maar niet afgaat.

mijn handigheid schiet echt tekort hierin,,
mischien over een tijdje dat ik het weer aandurf/kan :)

Offline chris.

  • Lid
    • http://www.linuxmintusers.be
  • Steunpunt: Nee
Re: imon vdf + remote
« Reactie #16 Gepost op: 2009/02/01, 22:08:02 »
OH SHIT,,

nu heb ik echt een probleem,,

in mijn pogingen om iig voor nu even het display aan de babbel te krijgen geprobeerd in windows op te starten,
dit was al maanden geleden en in denk omdat ik ondertussen heea aan hardware heb veranderd [niet bij nagedacht] wil windows niet meer starten,,liep helemaal vast.

nou prima dan,,ook geen probleem ik mis het niet dus weer booten in ubuntu.
maar nu kan ik geen van de partitie's / harde schijven die ik intern gebruik voor data/muziek/films meer mounten.

hoe los ik dit nu weer op?

Offline Gijsbert

  • Lid
  • Steunpunt: Ja
Re: imon vdf + remote
« Reactie #17 Gepost op: 2009/02/01, 22:27:36 »
Wat geeft sudo gedit /etc/fstab?
En als je weer zin hebt om verder te gaan met het display stuur je maar een PM of email.

Met vriendelijke groet,

Gijs
In der Beschränkung zeigt sich der Meister.

Offline chris.

  • Lid
    • http://www.linuxmintusers.be
  • Steunpunt: Nee
Re: imon vdf + remote
« Reactie #18 Gepost op: 2009/02/01, 22:29:02 »
oef opgelost dmv dit topic:

http://forum.ubuntu-nl.org/index.php/topic,34453.0.html

is goed gijs,,, bedankt voor al je tijd en moeite maar voorlopig geef ik het even op.

als ik weer moed verzameld heb dan gil ik wel XD

Offline Kakysan

  • Lid
    • Het computermannetje
  • Steunpunt: Nee
Re: imon vdf + remote
« Reactie #19 Gepost op: 2009/02/02, 07:46:15 »
Dit komt me allemaal zeer bekend voor ! Ik heb ook de handdoek in de ring gegooid. Zit nu op Vista, maar baal er wel van dat ik het nog steeds niet voor elkaar krijg.

http://forum.ubuntu-nl.org/index.php/topic,35777.0.html

Gr Karel,

Ik gebruik Linux Ubuntu 12.04 Unity & Windows 8.1

Mijn overstap weblogs zijn: http://overstappen2ubuntu.wordpress.com & http://overstappen2linuxmint.wordpress.com

Offline Gijsbert

  • Lid
  • Steunpunt: Ja
Re: imon vdf + remote
« Reactie #20 Gepost op: 2009/02/02, 16:11:50 »
Dit komt me allemaal zeer bekend voor ! Ik heb ook de handdoek in de ring gegooid. Zit nu op Vista, maar baal er wel van dat ik het nog steeds niet voor elkaar krijg.

http://forum.ubuntu-nl.org/index.php/topic,35777.0.html

Gr Karel,
Gewoon even een tijdje laten rusten, ook baal je ervan. Ga je goed inlezen, misschien al gedaan,  kijken welk programma je het liefst gebruikt en welke drivers je nodig hebt. Ben zelf ook in de weer geweest met Mythbuntu, grijze haren krijg je ervan, uiteindelijk voor elkaar behoudens de zender melding met pictogram, gaat om een bestandje inlezen door de backend. Voorlopig maar in de "koelkast" tot dit wat soepler loopt.

Met vriendelijke groet,

Gijs
In der Beschränkung zeigt sich der Meister.

Offline chris.

  • Lid
    • http://www.linuxmintusers.be
  • Steunpunt: Nee
Re: imon vdf + remote
« Reactie #21 Gepost op: 2009/02/02, 16:57:35 »
terug naar windows dat echt niet,,

nee dit is een klein ding wat me nu dwars zit maar geen halszaak is.
net zoals iedereen dat wel eens met dat andere OS gehad heeft.

als ik zie wat ik in een paar maanden met ubuntu uitspook en hoe het meeste op eigen kracht lukt [dual screen in een half uurtje aan de babbel inclusief drivers instellingen etc. om maar een voorbeeld te noemen] dat lukte onder windows echt niet zo snel.

nee ik blijf een ubuntuër en ooit lukt alles :)