Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: vertraging bij het opstarten ubuntu 16.10  (gelezen 8541 keer)

Offline boyette

  • Lid
vertraging bij het opstarten ubuntu 16.10
« Gepost op: 2016/08/08, 18:21:09 »
Ik heb sinds enkele weken het probleem dat als ik ubuntu mate 16.10 boot dat nadat ik het wachtwoord invoer het mate logo onderin verschijnt en het nog 33 secondes duurt voordat hij doorstart.

Voorheen was de totale boottijd 6 secondes als ik mijn wachtwoord een beetje snel invoerde.

Iemand die een idee heeft waarmee dit te maken zou kunnen hebben?

Kan ik een bootlog opvragen?
« Laatst bewerkt op: 2016/08/10, 02:42:04 door boyette »

Offline boyette

  • Lid
Re: vertraging bij het opstarten ubuntu 16.10
« Reactie #1 Gepost op: 2016/08/13, 08:01:33 »
1
[    0.758017] usb usb1: Product: EHCI Host Controller
[    0.758018] usb usb1: Manufacturer: Linux 4.4.0-33-generic ehci_hcd
[    0.758019] usb usb1: SerialNumber: 0000:00:12.2
[    0.758151] hub 1-0:1.0: USB hub found
[    0.758156] hub 1-0:1.0: 5 ports detected
[    0.758402] ehci-pci 0000:00:13.2: EHCI Host Controller
[    0.758407] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    0.758410] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.758418] ehci-pci 0000:00:13.2: debug port 1
[    0.758443] ehci-pci 0000:00:13.2: irq 17, io mem 0xff74d000
[    0.769967] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    0.770036] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.770038] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.770040] usb usb2: Product: EHCI Host Controller
[    0.770041] usb usb2: Manufacturer: Linux 4.4.0-33-generic ehci_hcd
[    0.770042] usb usb2: SerialNumber: 0000:00:13.2
[    0.770172] hub 2-0:1.0: USB hub found
[    0.770177] hub 2-0:1.0: 5 ports detected
[    0.770303] ehci-platform: EHCI generic platform driver
[    0.770317] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.770320] ohci-pci: OHCI PCI platform driver
[    0.770441] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    0.770446] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    0.770473] ohci-pci 0000:00:12.0: irq 18, io mem 0xff750000
[    0.829976] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.829979] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.829980] usb usb3: Product: OHCI PCI host controller
[    0.829982] usb usb3: Manufacturer: Linux 4.4.0-33-generic ohci_hcd
[    0.829983] usb usb3: SerialNumber: 0000:00:12.0
[    0.830197] hub 3-0:1.0: USB hub found
[    0.830206] hub 3-0:1.0: 5 ports detected
[    0.830426] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    0.830431] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    0.830451] ohci-pci 0000:00:13.0: irq 18, io mem 0xff74e000
[    0.889970] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.889973] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.889975] usb usb4: Product: OHCI PCI host controller
[    0.889976] usb usb4: Manufacturer: Linux 4.4.0-33-generic ohci_hcd
[    0.889977] usb usb4: SerialNumber: 0000:00:13.0
[    0.890194] hub 4-0:1.0: USB hub found
[    0.890201] hub 4-0:1.0: 5 ports detected
[    0.890433] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    0.890438] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[    0.890460] ohci-pci 0000:00:14.5: irq 18, io mem 0xff74c000
[    0.949960] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.949963] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.949965] usb usb5: Product: OHCI PCI host controller
[    0.949966] usb usb5: Manufacturer: Linux 4.4.0-33-generic ohci_hcd
[    0.949967] usb usb5: SerialNumber: 0000:00:14.5
[    0.950180] hub 5-0:1.0: USB hub found
[    0.950187] hub 5-0:1.0: 2 ports detected
[    0.950282] ohci-platform: OHCI generic platform driver
[    0.950296] uhci_hcd: USB Universal Host Controller Interface driver
[    0.950444] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    0.950448] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[    0.950627] xhci_hcd 0000:00:10.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608
[    0.950751] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    0.950752] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.950754] usb usb6: Product: xHCI Host Controller
[    0.950755] usb usb6: Manufacturer: Linux 4.4.0-33-generic xhci-hcd
[    0.950756] usb usb6: SerialNumber: 0000:00:10.0
[    0.950932] hub 6-0:1.0: USB hub found
[    0.950939] hub 6-0:1.0: 2 ports detected
[    0.951008] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    0.951010] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
[    0.954047] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.954062] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[    0.954064] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.954065] usb usb7: Product: xHCI Host Controller
[    0.954066] usb usb7: Manufacturer: Linux 4.4.0-33-generic xhci-hcd
[    0.954067] usb usb7: SerialNumber: 0000:00:10.0
[    0.954172] hub 7-0:1.0: USB hub found
[    0.954178] hub 7-0:1.0: 2 ports detected
[    0.954315] xhci_hcd 0000:00:10.1: xHCI Host Controller
[    0.954320] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
[    0.954495] xhci_hcd 0000:00:10.1: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608
[    0.954602] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    0.954603] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.954605] usb usb8: Product: xHCI Host Controller
[    0.954606] usb usb8: Manufacturer: Linux 4.4.0-33-generic xhci-hcd
[    0.954607] usb usb8: SerialNumber: 0000:00:10.1
[    0.954770] hub 8-0:1.0: USB hub found
[    0.954776] hub 8-0:1.0: 2 ports detected
[    0.954843] xhci_hcd 0000:00:10.1: xHCI Host Controller
[    0.954845] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
[    0.957918] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.957932] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[    0.957933] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.957935] usb usb9: Product: xHCI Host Controller
[    0.957938] usb usb9: Manufacturer: Linux 4.4.0-33-generic xhci-hcd
[    0.957939] usb usb9: SerialNumber: 0000:00:10.1
[    0.958060] hub 9-0:1.0: USB hub found
[    0.958067] hub 9-0:1.0: 2 ports detected
[    0.958165] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.961107] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.961110] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.961320] mousedev: PS/2 mouse device common for all mice
[    0.961453] rtc_cmos 00:06: RTC can wake from S4
[    0.961555] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.961573] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.961579] i2c /dev entries driver
[    0.961627] device-mapper: uevent: version 1.0.3
[    0.961689] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.961704] ledtrig-cpu: registered to indicate activity on CPUs
[    0.961708] EFI Variables Facility v0.08 2004-May-17
[    0.970331] NET: Registered protocol family 10
[    0.970547] NET: Registered protocol family 17
[    0.970561] Key type dns_resolver registered
[    0.970910] microcode: CPU0: patch_level=0x06001119
[    0.970917] microcode: CPU1: patch_level=0x06001119
[    0.970921] microcode: CPU2: patch_level=0x06001119
[    0.970929] microcode: CPU3: patch_level=0x06001119
[    0.970971] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.971120] registered taskstats version 1
[    0.971136] Loading compiled-in X.509 certificates
[    0.971855] Loaded X.509 cert 'Build time autogenerated kernel key: a4f10a3447a75ba3cb500a3a9f759d511dc6c9c2'
[    0.971871] zswap: loaded using pool lzo/zbud
[    0.973686] Key type trusted registered
[    0.976590] Key type encrypted registered
[    0.976600] AppArmor: AppArmor sha1 policy hashing enabled
[    0.976603] ima: No TPM chip found, activating TPM-bypass!
[    0.976629] evm: HMAC attrs: 0x1
[    0.976914]   Magic number: 12:407:921
[    0.977007] rtc_cmos 00:06: setting system clock to 2016-08-13 05:56:54 UTC (1471067814)
[    0.977148] acpi-cpufreq: overriding BIOS provided _PSD data
[    0.977280] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.977281] EDD information not available.
[    0.977351] PM: Hibernation image not present or could not be loaded.
[    0.978451] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[    0.978452] Write protecting the kernel read-only data: 14336k
[    0.979178] Freeing unused kernel memory: 1832K (ffff880001836000 - ffff880001a00000)
[    0.979544] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[    0.991543] random: systemd-udevd urandom read with 4 bits of entropy available
[    1.030592] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.035466] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.035602] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
[    1.060131] [drm] Initialized drm 1.1.0 20060810
[    1.061574] ahci 0000:00:11.0: version 3.0
[    1.061804] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    1.061810] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs
[    1.065449] scsi host0: ahci
[    1.065605] ata1: SATA max UDMA/133 abar m2048@0xff751000 port 0xff751100 irq 36
[    1.071648] scsi host1: pata_atiixp
[    1.074405] scsi host2: pata_atiixp
[    1.074506] ata2: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[    1.074511] ata3: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[    1.092352] [drm] radeon kernel modesetting enabled.
[    1.092844] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [bc:5f:f4:ea:4d:d1]
[    1.098351] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.098354] AMD IOMMUv2 functionality not available on this system
[    1.101189] Found CRAT image with size=1480
[    1.101193] Parsing CRAT table with 1 nodes
[    1.101195] Found CU entry in CRAT table with proximity_domain=0 caps=0
[    1.101196] CU CPU: cores=4 id_base=16
[    1.101197] Found memory entry in CRAT table with proximity_domain=0
[    1.101198] Found memory entry in CRAT table with proximity_domain=0
[    1.101199] Found memory entry in CRAT table with proximity_domain=0
[    1.101201] Found memory entry in CRAT table with proximity_domain=0
[    1.101202] Found memory entry in CRAT table with proximity_domain=0
[    1.101203] Found memory entry in CRAT table with proximity_domain=0
[    1.101205] Found cache entry in CRAT table with processor_id=16
[    1.101206] Found cache entry in CRAT table with processor_id=16
[    1.101207] Found cache entry in CRAT table with processor_id=16
[    1.101208] Found cache entry in CRAT table with processor_id=17
[    1.101209] Found cache entry in CRAT table with processor_id=18
[    1.101212] Found cache entry in CRAT table with processor_id=18
[    1.101213] Found cache entry in CRAT table with processor_id=18
[    1.101214] Found cache entry in CRAT table with processor_id=19
[    1.101216] Found TLB entry in CRAT table (not processing)
[    1.101217] Found TLB entry in CRAT table (not processing)
[    1.101218] Found TLB entry in CRAT table (not processing)
[    1.101220] Found TLB entry in CRAT table (not processing)
[    1.101221] Found TLB entry in CRAT table (not processing)
[    1.101221] Found TLB entry in CRAT table (not processing)
[    1.101222] Found TLB entry in CRAT table (not processing)
[    1.101223] Found TLB entry in CRAT table (not processing)
[    1.101224] Found TLB entry in CRAT table (not processing)
[    1.101225] Found TLB entry in CRAT table (not processing)
[    1.101225] Creating topology SYSFS entries
[    1.101258] Finished initializing topology ret=0
[    1.101303] kfd kfd: Initialized module
[    1.101527] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    1.101529] fb: switching to radeondrmfb from EFI VGA
[    1.101563] Console: switching to colour dummy device 80x25
[    1.102113] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9901 0x1849:0x9901).
[    1.102127] [drm] register mmio base: 0xFF700000
[    1.102129] [drm] register mmio size: 262144
[    1.102193] ATOM BIOS: 113
[    1.102259] radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.102261] radeon 0000:00:01.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    1.102263] [drm] Detected VRAM RAM=1024M, BAR=256M
[    1.102264] [drm] RAM width 64bits DDR
[    1.103406] [TTM] Zone  kernel: Available graphics memory: 11789052 kiB
[    1.103409] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    1.103410] [TTM] Initializing pool allocator
[    1.103416] [TTM] Initializing DMA pool allocator
[    1.103441] [drm] radeon: 1024M of VRAM memory ready
[    1.103442] [drm] radeon: 1024M of GTT memory ready.
[    1.103459] [drm] Loading ARUBA Microcode
[    1.103520] [drm] Internal thermal controller without fan control
[    1.103704] [drm] radeon: dpm initialized
[    1.104927] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[    1.104943] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.123539] [drm] PCIE GART of 1024M enabled (table at 0x00000000002E8000).
[    1.123673] radeon 0000:00:01.0: WB enabled
[    1.123677] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88060c1b7c00
[    1.124408] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90003835a18
[    1.144441] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff88060c1b7c18
[    1.144447] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff88060c1b7c1c
[    1.144450] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff88060c1b7c04
[    1.144454] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff88060c1b7c08
[    1.144456] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88060c1b7c0c
[    1.144457] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff88060c1b7c10

Offline boyette

  • Lid
Re: vertraging bij het opstarten ubuntu 16.10
« Reactie #2 Gepost op: 2016/08/13, 08:01:51 »
[    1.144503] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.144505] [drm] Driver supports precise vblank timestamp query.
[    1.144508] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[    1.144543] radeon 0000:00:01.0: radeon: using MSI.
[    1.144822] [drm] radeon: irq initialized.
[    1.164645] [drm] ring test on 0 succeeded in 2 usecs
[    1.164655] [drm] ring test on 3 succeeded in 3 usecs
[    1.164661] [drm] ring test on 4 succeeded in 3 usecs
[    1.213658] [drm] ring test on 5 succeeded in 1 usecs
[    1.225827] usb 4-1: new low-speed USB device number 2 using ohci-pci
[    1.233535] [drm] UVD initialized successfully.
[    1.261833] usb 6-2: new low-speed USB device number 2 using xhci_hcd
[    1.312789] alx 0000:03:00.0 enp3s0: renamed from eth0
[    1.342757] [drm] ring test on 6 succeeded in 18 usecs
[    1.342770] [drm] ring test on 7 succeeded in 4 usecs
[    1.342771] [drm] VCE initialized successfully.
[    1.343628] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.344160] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.344689] [drm] ib test on ring 4 succeeded in 0 usecs
[    1.365077] [drm] ib test on ring 5 succeeded
[    1.421063] usb 4-1: New USB device found, idVendor=1bcf, idProduct=0005
[    1.421066] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.421068] usb 4-1: Product: USB Optical Mouse
[    1.428088] usb 6-2: New USB device found, idVendor=046d, idProduct=c248
[    1.428092] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.428094] usb 6-2: Product: Gaming Keyboard G105
[    1.428096] usb 6-2: Manufacturer: Logitech
[    1.428277] usb 6-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.428283] usb 6-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.429893] hidraw: raw HID events driver (C) Jiri Kosina
[    1.470496] usbcore: registered new interface driver usbhid
[    1.470499] usbhid: USB HID core driver
[    1.473063] input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.0/0003:1BCF:0005.0001/input/input6
[    1.473193] hid-generic 0003:1BCF:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:13.0-1/input0
[    1.473390] input: Logitech Gaming Keyboard G105 as /devices/pci0000:00/0000:00:10.0/usb6/6-2/6-2:1.0/0003:046D:C248.0002/input/input7
[    1.526118] hid-generic 0003:046D:C248.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Gaming Keyboard G105] on usb-0000:00:10.0-2/input0
[    1.556277] input: Logitech Gaming Keyboard G105 as /devices/pci0000:00/0000:00:10.0/usb6/6-2/6-2:1.1/0003:046D:C248.0003/input/input8
[    1.557922] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.558153] ata1.00: ATA-9: OCZ-TRION100, SAFM11.2, max UDMA/133
[    1.558156] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.558375] ata1.00: configured for UDMA/133
[    1.558578] scsi 0:0:0:0: Direct-Access     ATA      OCZ-TRION100     11.2 PQ: 0 ANSI: 5
[    1.558788] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    1.558843] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.558857] sd 0:0:0:0: [sda] Write Protect is off
[    1.558859] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.558881] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.561129]  sda: sda1 sda2 sda3
[    1.561523] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.610092] hid-generic 0003:046D:C248.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Logitech Gaming Keyboard G105] on usb-0000:00:10.0-2/input1
[    1.713885] tsc: Refined TSC clocksource calibration: 3793.101 MHz
[    1.713889] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d59c5c4cd2, max_idle_ns: 881591082156 ns
[    1.882198] [drm] ib test on ring 6 succeeded
[    1.882731] [drm] ib test on ring 7 succeeded
[    1.883815] [drm] Radeon Display Connectors
[    1.883818] [drm] Connector 0:
[    1.883819] [drm]   VGA-1
[    1.883819] [drm]   HPD1
[    1.883821] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    1.883822] [drm]   Encoders:
[    1.883822] [drm]     CRT1: INTERNAL_UNIPHY2
[    1.883823] [drm]     CRT1: NUTMEG
[    1.883824] [drm] Connector 1:
[    1.883825] [drm]   HDMI-A-1
[    1.883825] [drm]   HPD2
[    1.883826] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    1.883827] [drm]   Encoders:
[    1.883828] [drm]     DFP1: INTERNAL_UNIPHY2
[    1.883828] [drm] Connector 2:
[    1.883829] [drm]   DVI-D-1
[    1.883830] [drm]   HPD3
[    1.883831] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[    1.883831] [drm]   Encoders:
[    1.883832] [drm]     DFP2: INTERNAL_UNIPHY
[    2.096608] [drm] fb mappable at 0xD04EC000
[    2.096611] [drm] vram apper at 0xD0000000
[    2.096612] [drm] size 8294400
[    2.096613] [drm] fb depth is 24
[    2.096614] [drm]    pitch is 7680
[    2.096774] fbcon: radeondrmfb (fb0) is primary device
[    2.096848] Console: switching to colour frame buffer device 240x67
[    2.096874] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    2.106056] [drm] Initialized radeon 2.43.0 20080528 for 0000:00:01.0 on minor 0
[    2.158881] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.321301] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    2.321435] systemd[1]: Detected architecture x86-64.
[    2.321846] systemd[1]: Set hostname to <bt-desktop>.
[    2.417103] systemd[1]: Created slice User and Session Slice.
[    2.417180] systemd[1]: Listening on Syslog Socket.
[    2.417211] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.417330] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.417359] systemd[1]: Listening on udev Kernel Socket.
[    2.417390] systemd[1]: Listening on udev Control Socket.
[    2.417473] systemd[1]: Created slice System Slice.
[    2.417490] systemd[1]: Reached target Slices.
[    2.417504] systemd[1]: Reached target Remote File Systems.
[    2.417541] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.417577] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.417602] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.417634] systemd[1]: Listening on Journal Socket.
[    2.437981] systemd[1]: Started Read required files in advance.
[    2.438760] systemd[1]: Starting Set the console keyboard layout...
[    2.439373] systemd[1]: Mounting Debug File System...
[    2.442669] systemd[1]: Starting Load Kernel Modules...
[    2.443438] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    2.444377] systemd[1]: Starting Uncomplicated firewall...
[    2.445235] systemd[1]: Starting Nameserver information manager...
[    2.446280] systemd[1]: Mounting POSIX Message Queue File System...
[    2.446350] systemd[1]: Reached target User and Group Name Lookups.
[    2.446396] systemd[1]: Reached target Encrypted Volumes.
[    2.447439] systemd[1]: Mounting Huge Pages File System...
[    2.447592] systemd[1]: Listening on Journal Audit Socket.
[    2.448388] systemd[1]: Starting Journal Service...
[    2.448606] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.453001] systemd[1]: Mounted Debug File System.
[    2.455786] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    2.458043] systemd[1]: Started Uncomplicated firewall.
[    2.458992] systemd[1]: Mounted POSIX Message Queue File System.
[    2.459137] systemd[1]: Mounted Huge Pages File System.
[    2.463200] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.467423] lp: driver loaded but no devices found
[    2.471158] systemd[1]: Started Nameserver information manager.
[    2.473963] ppdev: user-space parallel port driver
[    2.477031] parport_pc 00:04: reported by Plug and Play ACPI
[    2.477108] parport0: PC-style at 0x378, irq 5 [PCSPP,EPP]
[    2.488718] systemd[1]: Started Create Static Device Nodes in /dev.
[    2.489866] systemd[1]: Starting udev Kernel Device Manager...
[    2.503808] systemd[1]: Started Journal Service.
[    2.556620] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    2.572019] systemd-journald[921]: Received request to flush runtime journal from PID 1
[    2.574242] lp0: using parport0 (interrupt-driven).
[    2.715320] clocksource: Switched to clocksource tsc
[    2.779091] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    2.779417] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    2.842888] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[    2.850342] snd_hda_codec_hdmi hdaudioC0D0: HDMI ATI/AMD: no speaker allocation for ELD
[    2.851087] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[    2.858340] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    2.858344] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.858346] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.858348] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    2.858350] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    2.858352] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    2.858355] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    2.858357] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    2.858359] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    2.872679] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[    2.872765] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[    2.872833] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[    2.872927] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[    2.873000] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[    2.873070] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[    2.873157] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[    2.894393] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.970942] Adding 24036348k swap on /dev/sda3.  Priority:-1 extents:1 across:24036348k SSFS
[    2.996193] AVX version of gcm_enc/dec engaged.
[    2.996197] AES CTR mode by8 optimization enabled
[    3.024919] random: nonblocking pool is initialized
[    3.068371] kvm: Nested Virtualization enabled
[    3.068376] kvm: Nested Paging enabled
[    3.090393] audit: type=1400 audit(1471067816.610:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1900 comm="apparmor_parser"
[    3.091280] audit: type=1400 audit(1471067816.610:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1896 comm="apparmor_parser"
[    3.091297] audit: type=1400 audit(1471067816.610:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1896 comm="apparmor_parser"
[    3.091309] audit: type=1400 audit(1471067816.610:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1896 comm="apparmor_parser"
[    3.091318] audit: type=1400 audit(1471067816.610:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1896 comm="apparmor_parser"
[    3.091655] audit: type=1400 audit(1471067816.610:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1894 comm="apparmor_parser"
[    3.091664] audit: type=1400 audit(1471067816.610:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1894 comm="apparmor_parser"
[    3.091886] audit: type=1400 audit(1471067816.610:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1901 comm="apparmor_parser"
[    3.092789] audit: type=1400 audit(1471067816.610:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1903 comm="apparmor_parser"
[    3.730078] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    3.730531] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    3.733043] alx 0000:03:00.0 enp3s0: NIC Up: 1 Gbps Full
[    3.733260] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   10.206046] audit_printk_skb: 18 callbacks suppressed
[   10.206050] audit: type=1400 audit(1471067823.726:17): apparmor="DENIED" operation="connect" profile="/usr/sbin/ntpd" name="/run/dbus/system_bus_socket" pid=3416 comm="ntpd" requested_mask="wr" denied_mask="wr" fsuid=109 ouid=0
[   10.402379] Non-volatile memory driver v1.3
[   11.205659] audit: type=1400 audit(1471067824.726:18): apparmor="DENIED" operation="connect" profile="/usr/sbin/ntpd" name="/run/dbus/system_bus_socket" pid=3416 comm="ntpd" requested_mask="wr" denied_mask="wr" fsuid=109 ouid=0
[   12.216210] audit: type=1400 audit(1471067825.734:19): apparmor="DENIED" operation="connect" profile="/usr/sbin/ntpd" name="/run/dbus/system_bus_socket" pid=3416 comm="ntpd" requested_mask="wr" denied_mask="wr" fsuid=109 ouid=0
[   13.205587] audit: type=1400 audit(1471067826.975:20): apparmor="DENIED" operation="connect" profile="/usr/sbin/ntpd" name="/run/dbus/system_bus_socket" pid=3416 comm="ntpd" requested_mask="wr" denied_mask="wr" fsuid=109 ouid=0
[   14.228461] audit: type=1400 audit(1471067827.995:21): apparmor="DENIED" operation="connect" profile="/usr/sbin/ntpd" name="/run/dbus/system_bus_socket" pid=3416 comm="ntpd" requested_mask="wr" denied_mask="wr" fsuid=109 ouid=0
[   14.234217] audit: type=1400 audit(1471067828.003:22): apparmor="DENIED" operation="connect" profile="/usr/sbin/ntpd" name="/run/dbus/system_bus_socket" pid=3416 comm="ntpd" requested_mask="wr" denied_mask="wr" fsuid=109 ouid=0

Re: vertraging bij het opstarten ubuntu 16.10
« Reactie #3 Gepost op: 2016/08/13, 14:45:32 »
Bootchart installeren, zie je precies waar de vertraging zit.

Offline boyette

  • Lid
Re: vertraging bij het opstarten ubuntu 16.10
« Reactie #4 Gepost op: 2016/08/14, 10:11:52 »
Startup finished in 10.235s (firmware) + 4.005s (loader) + 2.180s (kernel) + 8.112s (userspace) = 24.533s

Offline jvecht

  • Lid
    • Just Vecht
Re: vertraging bij het opstarten ubuntu 16.10
« Reactie #5 Gepost op: 2016/08/14, 11:42:35 »
Hallo Boyette,

Dat valt dan toch wel mee? Dat is wat mijn Dell i5 laptop ook presteert.

Waar heb je trouwens jouw gegevens mee gegenereerd? Bootchart werkt niet mee nu we systemd hebben, begreep ik.

groet,

Just
« Laatst bewerkt op: 2016/08/14, 12:03:32 door jvecht »
GIMP bundel 2018  38 cursussen met mooi oefenmateriaal. Lekker lezen of er wat van opsteken!
  Boekje "Werken met Xubuntu" 5000+ downloads!
     Het Helpmij Magazine Mei 2021

Offline Nero

  • Lid
Re: vertraging bij het opstarten ubuntu 16.10
« Reactie #6 Gepost op: 2016/08/14, 13:14:07 »
Probeer eens systemd-analyze critical-chain  ;)

Offline jvecht

  • Lid
    • Just Vecht
Re: vertraging bij het opstarten ubuntu 16.10
« Reactie #7 Gepost op: 2016/08/14, 13:27:42 »
Ja, ook mooi, nero

Ik gebruikte  systemd-analyze plot > ~/plot.svg
Maar Boyette heeft er nog een firmware en een loader tijd voor zitten, dus ben ik nieuwsgierig. Na die twee zijn de tijden vergeleken met mijn Dell Latitude E4310 laptop met een i5 processor vergelijkbaar.

groet,

Just

GIMP bundel 2018  38 cursussen met mooi oefenmateriaal. Lekker lezen of er wat van opsteken!
  Boekje "Werken met Xubuntu" 5000+ downloads!
     Het Helpmij Magazine Mei 2021

Re: vertraging bij het opstarten ubuntu 16.10
« Reactie #8 Gepost op: 2016/08/14, 17:41:03 »
Bootchart werkt niet mee nu we systemd hebben, begreep ik.
Ha, wist ik niet. Ik kan Bootchart onder Xubuntu 16.04 nog wel installeren, maar er lijkt niets te gebeuren en een bootchart kan ik ook al niet vinden.

Offline boyette

  • Lid
Re: vertraging bij het opstarten ubuntu 16.10
« Reactie #9 Gepost op: 2016/08/14, 20:10:01 »
Het kan zijn dat deze tijden overeenkomen met een normale boot.
Maar dat betekent alleen maar dat het probleem niet in de boot zit of in het gedeelte wat gemeten wordt want ik heb een enorme vertraging van 30 secondes nadat ik mijn wachtwoord in heb getypt.

Dat is niet normaal.
Het is een desktop met een A10-5800K met 24gb DDR3 RAM

ik heb ook een laptop met een mobile A10 APU en die heeft 8gb RAM en start  sneller op.
Van de laptop zijn overigens de tijden:

Startup finished in 2.547s (firmware) + 3.893s (loader) + 3.714s (kernel) + 14.203s (userspace) = 24.359s

graphical.target @8.926s
└─multi-user.target @8.914s
  └─teamviewerd.service @8.824s +89ms
    └─network-online.target @8.798s
      └─NetworkManager-wait-online.service @2.725s +6.073s
        └─basic.target @1.588s
          └─sockets.target @1.588s
            └─snapd.socket @1.581s +4ms
              └─sysinit.target @1.578s
                └─apparmor.service @1.463s +90ms
                  └─local-fs.target @1.457s
                    └─run-user-1000-gvfs.mount @5.767s
                      └─run-user-1000.mount @4.159s
                        └─local-fs-pre.target @1.410s
                          └─keyboard-setup.service @224ms +1.173s
                            └─system.slice @203ms
                              └─-.slice @200ms


Desktop:
Startup finished in 10.254s (firmware) + 4.015s (loader) + 2.150s (kernel) + 8.137s (userspace) = 24.557s

graphical.target @8.125s
└─multi-user.target @8.108s
  └─postfix.service @6.883s +1.224s
    └─network-online.target @6.857s
      └─NetworkManager-wait-online.service @1.301s +5.555s
        └─basic.target @976ms
          └─sockets.target @975ms
            └─snapd.socket @972ms +1ms
              └─sysinit.target @969ms
                └─apparmor.service @773ms +181ms
                  └─local-fs.target @766ms
                    └─boot-efi.mount @756ms +10ms
                      └─systemd-fsck@dev-disk-by\x2duuid-D858\x2d03FC.service @7
                        └─dev-disk-by\x2duuid-D858\x2d03FC.device @666ms
« Laatst bewerkt op: 2016/08/14, 22:07:52 door boyette »