Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Hibernate Laptop Ubuntu Xenial Xerus  (gelezen 634 keer)

Offline boyette

  • Lid
Hibernate Laptop Ubuntu Xenial Xerus
« Gepost op: 2016/03/18, 09:17:41 »
als ik mijn systeem in de slaapstand zet ontwaakt hij niet meer als ik hem eruit wil halen.
Ook blijft de koeling actief.

Is hier wat aan te doen?
« Laatst bewerkt op: 2016/04/01, 07:58:41 door boyette »

Offline Ronaldus

  • Lid
  • Steunpunt: Nee
Re: hibernate laptop
« Reactie #1 Gepost op: 2016/03/18, 09:55:04 »

https://sites.google.com/site/computertip/fouten

Een kleine onhebbelijkheid. Zie punt 7.

(Op zich niet zo erg. Als je *Ubuntu gewoon opstart, gaat dat toch al redelijk snel)
5 pc's in 'actieve dienst'. Daarop draaiend:
** Mint XFCE 18.2 (gezins pc/hoofd pc) ** W10 (werk-pc) ** Ubuntu 17.10 (laptop 1)  ** Mint Cinnamon18.2 (laptop 2) ** W10 (laptop 3) **
Randapparatuur:
** Scanner: een compacte Canon Lide 110 (werkt 'out of the box' in Linux + voeding via usb) + div. HP's ** Printer: div. HP's **

Offline boyette

  • Lid
Re: hibernate laptop
« Reactie #2 Gepost op: 2016/03/18, 18:12:53 »
jammer. is idd zo opgestart met een ssd maar ik dacht misschien is er een manier om dat te configureren

Offline boyette

  • Lid
Re: hibernate laptop
« Reactie #3 Gepost op: 2016/03/20, 03:38:28 »

https://sites.google.com/site/computertip/fouten

Een kleine onhebbelijkheid. Zie punt 7.

(Op zich niet zo erg. Als je *Ubuntu gewoon opstart, gaat dat toch al redelijk snel)

dit was echter in ubuntu 14
ik heb 16.04

Offline Pjotr

  • Lid
    • http://sites.google.com/site/computertip
  • Steunpunt: Nee
Re: hibernate laptop
« Reactie #4 Gepost op: 2016/03/20, 10:21:21 »

https://sites.google.com/site/computertip/fouten

Een kleine onhebbelijkheid. Zie punt 7.

(Op zich niet zo erg. Als je *Ubuntu gewoon opstart, gaat dat toch al redelijk snel)

dit was echter in ubuntu 14
ik heb 16.04
Voor 16.04 is dat waarschijnlijk niet anders.

Overigens is het niet de bedoeling, dat je hulpvragen over een ontwikkelversie post in de gewone forumonderdelen..... Daarvoor is het subforum "Testforum" bedoeld. De gewone forumonderdelen zijn er alleen voor de stabiele versies.  :)

Offline boyette

  • Lid
Re: hibernate laptop
« Reactie #5 Gepost op: 2016/03/20, 10:23:47 »
16,04 is stabiel

Offline Pjotr

  • Lid
    • http://sites.google.com/site/computertip
  • Steunpunt: Nee
Re: hibernate laptop
« Reactie #6 Gepost op: 2016/03/20, 10:53:32 »
16,04 is stabiel
Nee, dat is-ie bepaald niet. Dat is-ie pas officieel op 21 april:
https://wiki.ubuntu.com/XenialXerus/ReleaseSchedule

Voorlopig is-ie nog zwaar in ontwikkeling, met alle mogelijke fouten en storingen van dien. Vandaar het Testforum.
« Laatst bewerkt op: 2016/03/20, 10:57:03 door Pjotr »

Offline jolo

  • Lid
  • Steunpunt: Nee
Re: hibernate laptop
« Reactie #7 Gepost op: 2016/03/26, 20:44:22 »
Of de slaapstand en/of pauzestand werkt in Ubuntu, hangt af van de hardware. Bij de R61i notebook uit mijn onderschrift werken deze beide in de testversie van Ubuntu 16.04. Dit is de output van inxi -Fxz
jolo@jolo-ThinkPad-R61:~$ inxi -Fxz
System:    Host: jolo-ThinkPad-R61 Kernel: 4.4.0-15-generic x86_64 (64 bit gcc: 5.3.1)
           Desktop: Unity 7.4.0 (Gtk 3.18.9-1ubuntu1) Distro: Ubuntu 16.04 xenial
Machine:   System: LENOVO (portable) product: 8932GMG v: ThinkPad R61
           Mobo: LENOVO model: 8932GMG Bios: LENOVO v: 7OETC4WW (2.24 ) date: 04/09/2010
CPU:       Dual core Intel Core2 Duo T5750 (-MCP-) cache: 2048 KB
           flags: (lm nx sse sse2 sse3 ssse3) bmips: 7980
           clock speeds: max: 2000 MHz 1: 1667 MHz 2: 1333 MHz
Graphics:  Card: Intel Mobile GM965/GL960 Integrated Graphics Controller (primary) bus-ID: 00:02.0
           Display Server: X.Org 1.18.1 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1280x800@60.00hz
           GLX Renderer: Mesa DRI Intel 965GM GLX Version: 2.1 Mesa 11.1.2 Direct Rendering: Yes
Audio:     Card Intel 82801H (ICH8 Family) HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture v: k4.4.0-15-generic
Network:   Card-1: Intel PRO/Wireless 3945ABG [Golan] Network Connection
           driver: iwl3945 v: in-tree:s bus-ID: 03:00.0
           IF: wls3 state: down mac: <filter>
           Card-2: Broadcom NetLink BCM5787M Gigabit Ethernet PCI Express
           driver: tg3 v: 3.137 bus-ID: 04:00.0
           IF: ens4 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 120.0GB (6.0% used) ID-1: /dev/sda model: OCZ_VERTEX size: 120.0GB temp: 0C
Partition: ID-1: / size: 29G used: 4.0G (15%) fs: ext4 dev: /dev/sda5
           ID-2: swap-1 size: 3.14GB used: 0.08GB (3%) fs: swap dev: /dev/sda7
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 45.0C mobo: 32.0C
           Fan Speeds (in rpm): cpu: 3013
Info:      Processes: 199 Uptime: 6:45 Memory: 615.6/2495.1MB Init: systemd runlevel: 5 Gcc sys: 5.3.1
           Client: Shell (bash 4.3.421) inxi: 2.2.35


Wellicht kun je een foutmelding vinden in de output van
dmesg | grep ACPI
Of check je /var/log/syslog
Bijvoorbeeld
cat  /var/log/syslog | grep ACPI
Check ook nog deze hyperlink https://wiki.ubuntu.com/UnderstandingSuspend waarin vermeldt staat, dat het mogelijk aan eventuele gesloten bron nvidia, fglrx drivers zou kunnen liggen. Koppel ook eventuele externe USB hardware los.

Hoofd PC september 2011 Asus P8Z68-V Pro i7 2600K 8 GB RAM GT730 Ubuntu 14.04
PC 2007 Asus P5B E6600 2GB RAM 8800GTS  
Notebook 2008 Lenovo ThinkPad R61i 8932GMG 2,5 GB RAM
Test pc's AthlonXP 1700+ PC 1,5 GB RAM nVidia 7600GS en Dual P3 1000 MHz 1 GB RAM X1650Pro

Offline boyette

  • Lid
Re: hibernate laptop
« Reactie #8 Gepost op: 2016/03/26, 20:47:29 »
zoiets ?

[    0.234799] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.234803] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)

0.235389] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.235526] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.235692] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness

[    4.767738] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB_.PCI0.SMBS.SMB0) (20150930/utaddress-254)
[    4.767748] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

« Laatst bewerkt op: 2016/03/26, 20:49:10 door boyette »

Offline jolo

  • Lid
  • Steunpunt: Nee
Re: hibernate laptop
« Reactie #9 Gepost op: 2016/03/28, 09:53:32 »
Ja, alleen kun je dan beter de volledige dmesg | grep ACPI output posten. Plaats deze bij voorkeur in de code tags van dit forum.

Als je dit hibernate probleem alleen met de testversie van Ubuntu 16.04 hebt, en deze dus wel goed functioneert met Ubuntu 14.04.4 zou je eventueel de dmesg output met die van de testversie van Ubuntu 16.04 kunnen vergelijken. Of eventueel beide posten.
 
Die eerste twee regels over “ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State” heb ik ook op de notebook uit mijn onderschrift. De genoemde firmware bug heb ik niet. Wel een andere firmware bug. Die laatste regel over die ACPI driver heb ik ook . Maar lijken geen invloed te hebben op de slaapstand en/of pauzestand in de testversie van Ubuntu 16.04.
Hoofd PC september 2011 Asus P8Z68-V Pro i7 2600K 8 GB RAM GT730 Ubuntu 14.04
PC 2007 Asus P5B E6600 2GB RAM 8800GTS  
Notebook 2008 Lenovo ThinkPad R61i 8932GMG 2,5 GB RAM
Test pc's AthlonXP 1700+ PC 1,5 GB RAM nVidia 7600GS en Dual P3 1000 MHz 1 GB RAM X1650Pro

Offline boyette

  • Lid
Re: hibernate laptop
« Reactie #10 Gepost op: 2016/03/30, 19:24:49 »

[    0.000000] BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
[    0.000000] efi:  ACPI=0x9fbfe000  ACPI 2.0=0x9fbfe014  SMBIOS=0x9fabef98
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009FBFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000009FBFE120 00009C (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009FBFB000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000009FBEA000 00CA66 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000009FB7C000 000040
[    0.000000] ACPI: SLIC 0x000000009FBFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000009FBFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000009FBFA000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000009FBF9000 000084 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000009FBF8000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000009FBF7000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000009FBE9000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDRT 0x000000009FBE8000 000047 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x000000009FBE7000 0001AC (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000009FBE5000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000009FBE4000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009FBE3000 0009F8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009FBE1000 001F6E (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000009FBE0000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000035] ACPI: Core revision 20150930
[    0.008110] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.195234] PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes)
[    0.195236] PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
[    0.219216] ACPI: bus type PCI registered
[    0.219218] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.231625] ACPI: Added _OSI(Module Device)
[    0.231628] ACPI: Added _OSI(Processor Device)
[    0.231629] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.231631] ACPI: Added _OSI(Processor Aggregator Device)
[    0.234464] ACPI: Executed 1 blocks of module-level executable AML code
[    0.237951] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.238427] ACPI : EC: EC started
[    0.238535] ACPI: Interpreter enabled
[    0.238540] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.238544] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.238556] ACPI: (supports S0 S3 S4 S5)
[    0.238557] ACPI: Using IOAPIC for interrupt routing
[    0.238713] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.239105] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.239241] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.239399] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.253167] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.254129] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.254244] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.254471] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.254817] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.257386] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.260447] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.287347] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287418] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287484] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287549] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287605] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287646] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287686] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287726] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287848] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.287894] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.288408] ACPI: bus type USB registered
[    0.288689] PCI: Using ACPI for IRQ routing
[    0.300656] pnp: PnP ACPI init
[    0.300826] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.301101] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.301134] pnp 00:02: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[    0.301174] pnp 00:03: Plug and Play ACPI device, IDs ETD061b ETD0001 PNP0f13 (active)
[    0.301287] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.301360] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.305428] pnp: PnP ACPI: found 6 devices
[    1.009027] ACPI: AC Adapter [ACAD] (on-line)
[    1.009094] ACPI: Power Button [PWRB]
[    1.009190] ACPI: Lid Switch [LID]
[    1.009234] ACPI: Power Button [PWRF]
[    1.009289] ACPI: acpi_idle registered with cpuidle
[    1.041188] ACPI: Battery Slot [BAT1] (battery present)
[    1.294608] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.294697] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.294710] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.295175] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    4.817186] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB_.PCI0.SMBS.SMB0) (20150930/utaddress-254)
[    4.817205] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.236466] thinkpad_acpi: ThinkPad ACPI Extras v0.25

Offline boyette

  • Lid
Re: Hibernate Laptop Ubuntu Xenial Xerus
« Reactie #11 Gepost op: 2016/04/14, 17:19:35 »
[    0.000000] BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
[    0.000000] efi:  ACPI=0x9fbfe000  ACPI 2.0=0x9fbfe014  SMBIOS=0x9fabef98
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009FBFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000009FBFE120 0000A4 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009FBFB000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000009FBEA000 00CA66 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000009FB7C000 000040
[    0.000000] ACPI: SLIC 0x000000009FBFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000009FBFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000009FBFA000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000009FBF9000 000084 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000009FBF8000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000009FBF7000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000009FBE9000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDRT 0x000000009FBE8000 000047 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x000000009FBE7000 0001AC (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000009FBE5000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000009FBE4000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009FBE3000 0009F8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009FBE1000 001F6E (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: VFCT 0x000000009FBDC000 004E84 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000009FBDB000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000034] ACPI: Core revision 20150930
[    0.008068] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.195145] PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes)
[    0.195147] PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
[    0.219137] ACPI: bus type PCI registered
[    0.219139] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.231562] ACPI: Added _OSI(Module Device)
[    0.231566] ACPI: Added _OSI(Processor Device)
[    0.231568] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.231569] ACPI: Added _OSI(Processor Aggregator Device)
[    0.234417] ACPI: Executed 1 blocks of module-level executable AML code
[    0.237915] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.238436] ACPI : EC: EC started
[    0.238544] ACPI: Interpreter enabled
[    0.238550] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.238554] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.238566] ACPI: (supports S0 S3 S4 S5)
[    0.238567] ACPI: Using IOAPIC for interrupt routing
[    0.238747] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.239128] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.239266] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.239425] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.253210] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.254212] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.254332] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.254610] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.254977] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.257621] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.260757] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.287306] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287376] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287444] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287512] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287568] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287609] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287649] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287689] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.287801] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.287866] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.288393] ACPI: bus type USB registered
[    0.288696] PCI: Using ACPI for IRQ routing
[    0.300475] pnp: PnP ACPI init
[    0.300651] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.300906] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.300938] pnp 00:02: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[    0.301006] pnp 00:03: Plug and Play ACPI device, IDs ETD061b ETD0001 PNP0f13 (active)
[    0.301125] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.301199] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.305382] pnp: PnP ACPI: found 6 devices
[    1.015088] ACPI: AC Adapter [ACAD] (off-line)
[    1.015153] ACPI: Power Button [PWRB]
[    1.015283] ACPI: Lid Switch [LID]
[    1.015327] ACPI: Power Button [PWRF]
[    1.015383] ACPI: acpi_idle registered with cpuidle
[    1.045142] ACPI: Battery Slot [BAT1] (battery present)
[    1.311971] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.312059] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.312073] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.312699] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    1.376367] [drm] ACPI VFCT contains a BIOS for 00:01.0 1002:990b, size 19968
[    4.826946] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB_.PCI0.SMBS.SMB0) (20150930/utaddress-254)
[    4.826956] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.747932] thinkpad_acpi: ThinkPad ACPI Extras v0.25

Offline boyette

  • Lid
Re: Hibernate Laptop Ubuntu Xenial Xerus
« Reactie #12 Gepost op: 2016/05/13, 20:49:48 »
[    0.000000] BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
[    0.000000] efi:  ACPI=0x9fbfe000  ACPI 2.0=0x9fbfe014  SMBIOS=0x9fabef98
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009FBFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000009FBFE120 0000A4 (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009FBFB000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000009FBEA000 00CA66 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000009FB7C000 000040
[    0.000000] ACPI: SLIC 0x000000009FBFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000009FBFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000009FBFA000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000009FBF9000 000084 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000009FBF8000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000009FBF7000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000009FBE9000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDRT 0x000000009FBE8000 000047 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x000000009FBE7000 0001AC (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000009FBE5000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000009FBE4000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009FBE3000 0009F8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009FBE1000 001F6E (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: VFCT 0x000000009FBDC000 004E84 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000009FBDB000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000034] ACPI: Core revision 20150930
[    0.007944] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.198457] PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes)
[    0.198467] PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
[    0.223199] ACPI: bus type PCI registered
[    0.223202] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.235542] ACPI: Added _OSI(Module Device)
[    0.235545] ACPI: Added _OSI(Processor Device)
[    0.235546] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.235548] ACPI: Added _OSI(Processor Aggregator Device)
[    0.238351] ACPI: Executed 1 blocks of module-level executable AML code
[    0.241805] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.242313] ACPI : EC: EC started
[    0.242420] ACPI: Interpreter enabled
[    0.242426] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.242430] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.242442] ACPI: (supports S0 S3 S4 S5)
[    0.242443] ACPI: Using IOAPIC for interrupt routing
[    0.242604] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.242988] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.243127] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.243283] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.257206] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.258180] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.258301] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.258575] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.258933] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.261568] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.264672] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.291304] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.291368] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.291430] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.291490] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.291542] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.291578] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.291615] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.291651] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.291755] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.291803] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.292525] ACPI: bus type USB registered
[    0.292799] PCI: Using ACPI for IRQ routing
[    0.304801] pnp: PnP ACPI init
[    0.304963] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.305178] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.305209] pnp 00:02: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[    0.305250] pnp 00:03: Plug and Play ACPI device, IDs ETD061b ETD0001 PNP0f13 (active)
[    0.305362] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.305435] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.309445] pnp: PnP ACPI: found 6 devices
[    1.013733] ACPI: AC Adapter [ACAD] (off-line)
[    1.013796] ACPI: Power Button [PWRB]
[    1.013926] ACPI: Lid Switch [LID]
[    1.013969] ACPI: Power Button [PWRF]
[    1.014019] ACPI: acpi_idle registered with cpuidle
[    1.045278] ACPI: Battery Slot [BAT1] (battery present)
[    1.314737] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.314854] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.314866] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.315365] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    1.383563] [drm] ACPI VFCT contains a BIOS for 00:01.0 1002:990b, size 19968
[    4.797860] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB_.PCI0.SMBS.SMB0) (20150930/utaddress-254)
[    4.797869] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.870923] thinkpad_acpi: ThinkPad ACPI Extras v0.25

mag deze verplaatst naar het releaseforum?

Offline jolo

  • Lid
  • Steunpunt: Nee
Re: Hibernate Laptop Ubuntu Xenial Xerus
« Reactie #13 Gepost op: 2016/05/14, 21:22:06 »
[Offtopic] Eventuele verplaatsing van je topic kun je beter vragen aan de moderators. Bijvoorbeeld via het "Meld dit bericht aan de moderator" knop in je startpost. In het volgende scherm dat je te zien krijgt, kun je om de verplaatsing van je topic vragen. [/Offtopic]


Je dmesg output lijkt me verder in orde. Vooral ook omdat er in staat
ACPI: (supports S0 S3 S4 S5)
Wellicht kun je nog iets bruikbaars vinden in deze Duitstalige hyperlink https://wiki.ubuntuusers.de/Energiesparmodi_mit_ACPI/
Hoofd PC september 2011 Asus P8Z68-V Pro i7 2600K 8 GB RAM GT730 Ubuntu 14.04
PC 2007 Asus P5B E6600 2GB RAM 8800GTS  
Notebook 2008 Lenovo ThinkPad R61i 8932GMG 2,5 GB RAM
Test pc's AthlonXP 1700+ PC 1,5 GB RAM nVidia 7600GS en Dual P3 1000 MHz 1 GB RAM X1650Pro

Offline Ron

  • Forumteam
    • r0n
    • Dwarsligger
  • Steunpunt: Ja
Re: Hibernate Laptop Ubuntu Xenial Xerus
« Reactie #14 Gepost op: 2016/05/14, 21:39:42 »
[OffTopic]Verplaatst............[/OffTopic]
OpenStandaard evangelist, OpenSource promotor, OpenData liefhebber.
Xubuntu gebruiker en voorstander (XFCE).
In Nederland bekend als een dwarsligger.