Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: JVC MP3 speler mounten  (gelezen 1801 keer)

wilsat

  • Gast
JVC MP3 speler mounten
« Gepost op: 2006/03/12, 15:05:10 »
Zojuist een JVC MP3 speler gekregen. Met HD. Wat ik ook probeer, ik krijg het mounten niet voor elkaar. de PC zou deze toch moeten zien als een externe schijf? Juist deze speler uitgezicht vanwege de USB plug and play mogelijkheid.
Moet ik hiervoor toch terug naar Windows???

Offline Dennis Kaarsemaker

  • Administrator
    • dennis
    • http://www.kaarsemaker.net
  • Steunpunt: Nee
JVC MP3 speler mounten
« Reactie #1 Gepost op: 2006/03/12, 15:11:48 »
Als het ding zich inderdaad als een harde schijf gedraagd zou dat moeten - heb je onder windows XP drivers nodig?

wilsat

  • Gast
JVC MP3 speler mounten
« Reactie #2 Gepost op: 2006/03/12, 16:18:27 »
Nee, onder windows word de speler direct herkend.

Offline Dennis Kaarsemaker

  • Administrator
    • dennis
    • http://www.kaarsemaker.net
  • Steunpunt: Nee
JVC MP3 speler mounten
« Reactie #3 Gepost op: 2006/03/12, 18:03:54 »
Steek hem er eens opnieuw in en stuur de uitvoer van dmesg (laatste 40 regels) en lshal eens mee.

wilsat

  • Gast
JVC MP3 speler mounten
« Reactie #4 Gepost op: 2006/03/12, 19:44:07 »
[4295207.683000] cdrom: This disc doesn't have any tracks I recognize!
[4295243.622000] usb 5-2: USB disconnect, address 2
[4295249.322000] cdrom: This disc doesn't have any tracks I recognize!
[4295268.038000] usb 5-2: new high speed USB device using ehci_hcd and address 3
[4295271.305000] cdrom: This disc doesn't have any tracks I recognize!
[4295728.122000] usb 5-2: USB disconnect, address 3
[4295767.788000] usb 5-2: new high speed USB device using ehci_hcd and address 4
[4296206.372000] usb 5-2: USB disconnect, address 4
[4296266.538000] usb 5-2: new high speed USB device using ehci_hcd and address 5
[4296569.122000] usb 5-2: USB disconnect, address 5
[4306469.403000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
[4306469.403000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
[4306469.515000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
[4306469.515000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
[4306469.598000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
[4306469.598000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
[4306469.722000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
[4306469.722000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
[4306469.789000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
[4306469.789000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
[4306469.879000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
[4306469.879000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
[4306469.975000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
[4306469.975000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
[4306470.794000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
[4306470.794000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
[4306529.369000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
[4306529.369000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
[4306529.430000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
[4306529.430000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
[4306529.539000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
[4306529.539000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
[4306529.600000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
[4306529.600000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
[4306529.683000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
[4306529.683000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
[4306529.778000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
[4306529.778000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
[4306530.493000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
[4306530.493000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
[4306530.571000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
[4306530.571000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
willem@willem:~$

   en


 info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d1_scsi_host_scsi_device_lun0'  (string)
  linux.subsystem = 'scsi'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'SCSI Device'  (string)
  info.linux.driver = 'sd'  (string)
  scsi.lun = 0  (0x0)  (int)
  scsi.target = 0  (0x0)  (int)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 1  (0x1)  (int)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d1_scsi_host'  (string)  info.bus = 'scsi'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_24d1_scsi_host'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d1_scsi_host'  (string)
  linux.subsystem = 'scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  scsi_host.host = 1  (0x1)  (int)
  info.product = 'SCSI Host Adapter'  (string)
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d1'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/host1'  (string)
  linux.sysfs_path = '/sys/class/scsi_host/host1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_24d1'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d1'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'Unknown (0x524c)'  (string)
  pci.subsys_vendor = 'Intel Corp.'  (string)
  info.product = '82801EB (ICH5) Serial ATA 150 Storage Controller'  (string)
  pci.product = '82801EB (ICH5) Serial ATA 150 Storage Controller'  (string)
  info.vendor = 'Intel Corp.'  (string)
  pci.vendor = 'Intel Corp.'  (string)
  pci.device_protocol = 143  (0x8f)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.device_class = 1  (0x1)  (int)
  pci.subsys_vendor_id = 32902  (0x8086)  (int)
  pci.subsys_product_id = 21068  (0x524c)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 9425  (0x24d1)  (int)
  info.linux.driver = 'ata_piix'  (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_24d3'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d3'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'Unknown (0x524c)'  (string)
  pci.subsys_vendor = 'Intel Corp.'  (string)
  info.product = '82801EB/ER (ICH5/ICH5R) SMBus Controller'  (string)
  pci.product = '82801EB/ER (ICH5/ICH5R) SMBus Controller'  (string)
  info.vendor = 'Intel Corp.'  (string)
  pci.vendor = 'Intel Corp.'  (string)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 5  (0x5)  (int)
  pci.device_class = 12  (0xc)  (int)
  pci.subsys_vendor_id = 32902  (0x8086)  (int)
  pci.subsys_product_id = 21068  (0x524c)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 9427  (0x24d3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.3'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_alsa_playback_0_4'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_alsa_playback_0_4'  (string)
  linux.device_file = '/dev/snd/pcmC0D4p'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH5 - IEC958 ALSA Playback Device'  (string)
  alsa.type = 'playback'  (string)
  alsa.device_id = 'Intel ICH5 - IEC958'  (string)
  alsa.card_id = 'ICH5'  (string)
  alsa.device = 4  (0x4)  (int)
  alsa.card = 0  (0x0)  (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D4p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_alsa_capture_0_3'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_alsa_capture_0_3'  (string)
  linux.device_file = '/dev/snd/pcmC0D3c'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH5 - ADC2 ALSA Capture Device'  (string)
  alsa.type = 'capture'  (string)
  alsa.device_id = 'Intel ICH5 - ADC2'  (string)
  alsa.card_id = 'ICH5'  (string)
  alsa.device = 3  (0x3)  (int)
  alsa.card = 0  (0x0)  (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D3c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_alsa_capture_0_2'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_alsa_capture_0_2'  (string)
  linux.device_file = '/dev/snd/pcmC0D2c'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH5 - MIC2 ADC ALSA Capture Device'  (string)
  alsa.type = 'capture'  (string)
  alsa.device_id = 'Intel ICH5 - MIC2 ADC'  (string)
  alsa.card_id = 'ICH5'  (string)
  alsa.device = 2  (0x2)  (int)
  alsa.card = 0  (0x0)  (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D2c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_alsa_capture_0_1'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_alsa_capture_0_1'  (string)
  linux.device_file = '/dev/snd/pcmC0D1c'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH5 - MIC ADC ALSA Capture Device'  (string)
  alsa.type = 'capture'  (string)
  alsa.device_id = 'Intel ICH5 - MIC ADC'  (string)
  alsa.card_id = 'ICH5'  (string)
  alsa.device = 1  (0x1)  (int)
  alsa.card = 0  (0x0)  (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D1c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_alsa_playback_0_0'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_alsa_playback_0_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0p'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH5 ALSA Playback Device'  (string)
  alsa.type = 'playback'  (string)
  alsa.device_id = 'Intel ICH5'  (string)
  alsa.card_id = 'ICH5'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.card = 0  (0x0)  (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D0p'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_alsa_capture_0_0'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_alsa_capture_0_0'  (string)
  linux.device_file = '/dev/snd/pcmC0D0c'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'Intel ICH5 ALSA Capture Device'  (string)
  alsa.type = 'capture'  (string)
  alsa.device_id = 'Intel ICH5'  (string)
  alsa.card_id = 'ICH5'  (string)
  alsa.device = 0  (0x0)  (int)
  alsa.card = 0  (0x0)  (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D0c'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_alsa_control_0__1'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5_alsa_control_0__1'  (string)
  linux.device_file = '/dev/snd/controlC0'  (string)
  linux.subsystem = 'sound'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = 'ICH5 ALSA Control Device'  (string)
  alsa.card_id = 'ICH5'  (string)
  alsa.type = 'control'  (string)
  alsa.card = 0  (0x0)  (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
  linux.sysfs_path = '/sys/class/sound/controlC0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_24d5'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_24d5'  (string)
  linux.subsystem = 'pci'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  pci.subsys_product = 'Unknown (0xa000)'  (string)
  pci.subsys_vendor = 'Intel Corp.'  (string)
  info.product = '82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller'  (string)
  pci.product = '82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller'  (string)
  info.vendor = 'Intel Corp.'  (string)
  pci.vendor = 'Intel Corp.'  (string)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.device_class = 4  (0x4)  (int)
  pci.subsys_vendor_id = 32902  (0x8086)  (int)
  pci.subsys_product_id = 40960  (0xa000)  (int)
  pci.vendor_id = 32902  (0x8086)  (int)
  pci.product_id = 9429  (0x24d5)  (int)
  info.linux.driver = 'Intel ICH'  (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pci'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.5'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'AT DMA Controller'  (string)
  pnp.description = 'AT DMA Controller'  (string)
  pnp.id = 'PNP0200'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:00'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:00'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'AT Real-Time Clock'  (string)
  pnp.description = 'AT Real-Time Clock'  (string)
  pnp.id = 'PNP0b00'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:01'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:01'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  pnp.id = 'PNP0303'  (string)
  info.linux.driver = 'i8042 kbd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:02'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0f03'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f03'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'Microsoft PS/2-style Mouse'  (string)
  pnp.description = 'Microsoft PS/2-style Mouse'  (string)
  pnp.id = 'PNP0f03'  (string)
  info.linux.driver = 'i8042 aux'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:03'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:03'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'AT-style speaker sound'  (string)
  pnp.description = 'AT-style speaker sound'  (string)
  pnp.id = 'PNP0800'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:04'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:04'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'Math Coprocessor'  (string)
  pnp.description = 'Math Coprocessor'  (string)
  pnp.id = 'PNP0c04'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:05'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:05'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'PC standard floppy disk controller'  (string)
  pnp.description = 'PC standard floppy disk controller'  (string)
  pnp.id = 'PNP0700'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:06'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:06'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'  (string)
  linux.device_file = '/dev/ttyS0'  (string)
  linux.subsystem = 'tty'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  info.product = '16550A-compatible COM port'  (string)
  serial.type = 'platform'  (string)
  serial.port = 0  (0x0)  (int)
  serial.device = '/dev/ttyS0'  (string)
  serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  info.capabilities = {'serial'} (string list)
  info.category = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  linux.sysfs_path = '/sys/class/tty/ttyS0'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = '16550A-compatible COM port'  (string)
  pnp.description = '16550A-compatible COM port'  (string)
  pnp.id = 'PNP0501'  (string)
  info.linux.driver = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:07'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:07'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0400'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0400'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'Standard LPT printer port'  (string)
  pnp.description = 'Standard LPT printer port'  (string)
  pnp.id = 'PNP0400'  (string)
  info.linux.driver = 'parport_pc'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:08'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:08'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:09'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:09'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_INT0800'
  info.udi = '/org/freedesktop/Hal/devices/pnp_INT0800'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'PnP Device (INT0800)'  (string)
  pnp.id = 'INT0800'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:0a'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0a'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:0b'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0b'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'  (string)
  linux.subsystem = 'pnp'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  info.product = 'System Board'  (string)
  pnp.description = 'System Board'  (string)
  pnp.id = 'PNP0c01'  (string)
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.bus = 'pnp'  (string)
  linux.sysfs_path_device = '/sys/devices/pnp0/00:0c'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0c'  (string)

udi = '/org/freedesktop/Hal/devices/computer'
  storage.policy.default.mount_option.exec = true  (bool)
  storage.policy.default.mount_option.user = true  (bool)
  storage.policy.default.mount_option.noauto = true  (bool)
  storage.policy.default.managed_keyword.secondary = 'managed'  (string)
  storage.policy.default.managed_keyword.primary = 'comment=fstabsync'  (string)  storage.policy.default.use_managed_keyword = false  (bool)
  storage.policy.default.mount_root = '/media'  (string)
  info.addons = {'hald-addon-acpi'} (string list)
  power_management.acpi.linux.version = '20050729'  (string)
  power_management.type = 'acpi'  (string)
  power_management.is_enabled = true  (bool)
  system.formfactor = 'unknown'  (string)
  system.kernel.machine = 'i686'  (string)
  system.kernel.version = '2.6.12-10-686'  (string)
  system.kernel.name = 'Linux'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Computer'  (string)
  linux.sysfs_path_device = '(none)'  (string)
  info.bus = 'unknown'  (string)


Dumped 61 device(s) from the Global Device List:
------------------------------------------------

willem@willem:~$ [4295207.683000] cdrom: This disc doesn't have any tracks I recognize!
> [4295243.622000] usb 5-2: USB disconnect, address 2
> [4295249.322000] cdrom: This disc doesn't have any tracks I recognize!
bash: [4295207.683000]: command not found
willem@willem:~$ [4295268.038000] usb 5-2: new high speed USB device using ehci_hcd and address 3
bash: [4295268.038000]: command not found
willem@willem:~$ [4295271.305000] cdrom: This disc doesn't have any tracks I recognize!
> [4295728.122000] usb 5-2: USB disconnect, address 3
> [4295767.788000] usb 5-2: new high speed USB device using ehci_hcd and address 4
> [4296206.372000] usb 5-2: USB disconnect, address 4
> [4296266.538000] usb 5-2: new high speed USB device using ehci_hcd and address 5
> [4296569.122000] usb 5-2: USB disconnect, address 5
> [4306469.403000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
> [4306469.403000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> [4306469.515000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
> [4306469.515000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> [4306469.598000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
> [4306469.598000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> [4306469.722000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
> [4306469.722000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> [4306469.789000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
> [4306469.789000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> [4306469.879000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
> [4306469.879000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> [4306469.975000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
> [4306469.975000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> [4306470.794000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
> [4306470.794000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> [4306529.369000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
> [4306529.369000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> [4306529.430000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
> [4306529.430000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> [4306529.539000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
> [4306529.539000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> [4306529.600000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
> [4306529.600000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> [4306529.683000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
> [4306529.683000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> [4306529.778000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
> [4306529.778000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> [4306530.493000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on is a0060/serio0).
> [4306530.493000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> [4306530.571000] atkbd.c: Unknown key released (translated set 2, code 0xaa on i sa0060/serio0).
> [4306530.571000] atkbd.c: Use 'setkeycodes e02a ' to make it known.
> willem@willem:~$
>
>


Het zijn wel iets meer dan 40 regels, maar ik weet niet precies wat je zoekt met het laatste commando.

Offline Dennis Kaarsemaker

  • Administrator
    • dennis
    • http://www.kaarsemaker.net
  • Steunpunt: Nee
JVC MP3 speler mounten
« Reactie #5 Gepost op: 2006/03/12, 20:56:42 »
Heb je op hetzelfde moment toevallig een CD in de cd speler zitten? Zo nee, dan ben ik bang dat Ubuntu moeite heeft het ding te herkennen.

Offline Dennis Kaarsemaker

  • Administrator
    • dennis
    • http://www.kaarsemaker.net
  • Steunpunt: Nee
JVC MP3 speler mounten
« Reactie #6 Gepost op: 2006/03/12, 20:56:56 »
Wat is het typenummer?

wilsat

  • Gast
JVC MP3 speler mounten
« Reactie #7 Gepost op: 2006/03/12, 21:46:14 »
Type is XA-HD500S......