Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Ingebouwde kaartlezer  (gelezen 2191 keer)

Offline Pjotr

  • Lid
    • http://sites.google.com/site/computertip
  • Steunpunt: Nee
Ingebouwde kaartlezer
« Gepost op: 2007/03/10, 15:11:44 »
In mijn nieuwe Sony Vaio klaptop zit een handige kaartlezer ingebouwd (voor SD-kaartjes). Alleen: Ubuntu herkent hem niet. Het is een ding van Texas Instruments, zegt Windows, die hem wel herkent. Veel meer wil W. er overigens niet over kwijt; ik kan niks vinden over de chipset.

Hoe kom ik er achter welke chipset het is, zodat ik gericht kan gaan zoeken op oplossingen? Is daar een bepaald terminalcommando voor? Zowel Linuxcommando's als W.-commando's zijn welkom!

Groet, Pjotr.

Offline Ron

  • Forumteam
    • r0n
    • Dwarsligger
  • Steunpunt: Ja
Ingebouwde kaartlezer
« Reactie #1 Gepost op: 2007/03/10, 15:18:59 »
Onlangs was mijn zwager hier, met een losse (USB) kaart lezer.
Bij het inpluggen werd deze niet aangegeven, maar inpluggen terwijl er een geheugen kaart inzat gaf de oplossing !
Misschien moet je de PC een keer opstarten met een kaartje in de lezer ?

Succes,
Ron
OpenStandaard evangelist, OpenSource promotor,  OpenData liefhebber.
Xubuntu gebruiker, liefhebber en tester.
In Nederland bekend als een dwarsligger.

Offline Pjotr

  • Lid
    • http://sites.google.com/site/computertip
  • Steunpunt: Nee
Ingebouwde kaartlezer
« Reactie #2 Gepost op: 2007/03/10, 15:22:52 »
Meteen ff geprobeerd, maar helaas.....

andreh

  • Gast
Ingebouwde kaartlezer
« Reactie #3 Gepost op: 2007/03/10, 16:24:09 »
En je ziet tijdens het inpluggen ook niets staan in
dmesg
of
tail /var/log/messages

Offline Pjotr

  • Lid
    • http://sites.google.com/site/computertip
  • Steunpunt: Nee
Ingebouwde kaartlezer
« Reactie #4 Gepost op: 2007/03/10, 18:01:17 »
Citaat van: andreh
En je ziet tijdens het inpluggen ook niets staan in
dmesg

of

tail /var/log/messages
Hij ziet hem wel! Kijk maar:
Mar 10 17:50:31 klaptop kernel: [17179928.272000] tifm_7xx1: sd card detected in socket 3

Maar hoe krijg ik het ding nou aan de praat....?

Hier de complete dmesg:
[17179572.848000] checking if image is initramfs... it is
[17179573.384000] Freeing initrd memory: 5649k freed
[17179573.384000] ACPI: Core revision 20060707
[17179573.384000] ACPI: Looking for DSDT ... not found!
[17179573.408000] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[17179573.408000] Total of 1 processors activated (3463.26 BogoMIPS).
[17179573.408000] ENABLING IO-APIC IRQs
[17179573.408000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179573.552000] Brought up 1 CPUs
[17179573.552000] migration_cost=0
[17179573.552000] NET: Registered protocol family 16
[17179573.552000] EISA bus registered
[17179573.552000] ACPI: bus type pci registered
[17179573.552000] PCI: Using MMCONFIG
[17179573.552000] Setting up standard PCI resources
[17179573.556000] ACPI: Interpreter enabled
[17179573.556000] ACPI: Using IOAPIC for interrupt routing
[17179573.556000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.556000] PCI: Probing PCI hardware (bus 00)
[17179573.556000] Boot video device is 0000:00:02.0
[17179573.560000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[17179573.560000] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[17179573.560000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[17179573.560000] PCI: Transparent bridge - 0000:00:1e.0
[17179573.560000] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#07) (try 'pci=assign-busses')
[17179573.560000] Please report the result to linux-kernel to fix this permanently
[17179573.560000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179573.564000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[17179573.564000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[17179573.568000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[17179573.568000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[17179573.568000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[17179573.568000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[17179573.568000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[17179573.568000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[17179573.568000] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[17179573.568000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[17179573.568000] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[17179573.568000] ACPI: Embedded Controller [EC0] (gpe 29) interrupt mode.
[17179573.572000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.572000] pnp: PnP ACPI init
[17179573.576000] pnp: PnP ACPI: found 9 devices
[17179573.576000] PnPBIOS: Disabled by ACPI PNP
[17179573.576000] PCI: Using ACPI for IRQ routing
[17179573.576000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179573.576000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[17179573.576000] PCI: Bridge: 0000:00:1c.0
[17179573.576000]   IO window: 5000-5fff
[17179573.576000]   MEM window: b4000000-b7ffffff
[17179573.576000]   PREFETCH window: d0000000-d3ffffff
[17179573.576000] PCI: Bridge: 0000:00:1c.1
[17179573.576000]   IO window: 6000-6fff
[17179573.576000]   MEM window: b8000000-bbffffff
[17179573.576000]   PREFETCH window: d4000000-d7ffffff
[17179573.576000] PCI: Bus 7, cardbus bridge: 0000:06:09.0
[17179573.576000]   IO window: 00007400-000074ff
[17179573.576000]   IO window: 00007800-000078ff
[17179573.576000]   PREFETCH window: 50000000-51ffffff
[17179573.576000]   MEM window: 54000000-55ffffff
[17179573.576000] PCI: Bridge: 0000:00:1e.0
[17179573.576000]   IO window: 7000-7fff
[17179573.576000]   MEM window: bc000000-bc0fffff
[17179573.576000]   PREFETCH window: 50000000-52ffffff
[17179573.576000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
[17179573.576000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179573.576000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 177
[17179573.576000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179573.576000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179573.576000] ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 20 (level, low) -> IRQ 185
[17179573.576000] NET: Registered protocol family 2
[17179573.604000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179573.604000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179573.604000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179573.604000] TCP: Hash tables configured (established 131072 bind 65536)
[17179573.604000] TCP reno registered
[17179573.604000] Simple Boot Flag at 0x36 set to 0x1
[17179573.604000] audit: initializing netlink socket (disabled)
[17179573.604000] audit(1173548680.604:1): initialized
[17179573.604000] highmem bounce pool size: 64 pages
[17179573.604000] VFS: Disk quotas dquot_6.5.1
[17179573.604000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.604000] Initializing Cryptographic API
[17179573.604000] io scheduler noop registered
[17179573.604000] io scheduler anticipatory registered
[17179573.604000] io scheduler deadline registered
[17179573.604000] io scheduler cfq registered (default)
[17179573.604000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
[17179573.604000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179573.604000] assign_interrupt_mode Found MSI capability
[17179573.604000] Allocate Port Service[0000:00:1c.0:pcie00]
[17179573.604000] Allocate Port Service[0000:00:1c.0:pcie02]
[17179573.604000] Allocate Port Service[0000:00:1c.0:pcie03]
[17179573.604000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 177
[17179573.604000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179573.604000] assign_interrupt_mode Found MSI capability
[17179573.604000] Allocate Port Service[0000:00:1c.1:pcie00]
[17179573.604000] Allocate Port Service[0000:00:1c.1:pcie02]
[17179573.604000] Allocate Port Service[0000:00:1c.1:pcie03]
[17179573.604000] isapnp: Scanning for PnP cards...
[17179573.960000] isapnp: No Plug & Play device found
[17179573.980000] Real Time Clock Driver v1.12ac
[17179573.980000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179573.984000] mice: PS/2 mouse device common for all mice
[17179573.984000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.984000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.984000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.984000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179573.988000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179573.988000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.988000] EISA: Probing bus 0 at eisa.0
[17179573.988000] Cannot allocate resource for EISA slot 1
[17179573.988000] Cannot allocate resource for EISA slot 4
[17179573.988000] Cannot allocate resource for EISA slot 5
[17179573.988000] Cannot allocate resource for EISA slot 6
[17179573.988000] Cannot allocate resource for EISA slot 7
[17179573.988000] EISA: Detected 0 cards.
[17179573.988000] TCP bic registered
[17179573.988000] NET: Registered protocol family 1
[17179573.988000] NET: Registered protocol family 8
[17179573.988000] NET: Registered protocol family 20
[17179573.988000] Using IPI No-Shortcut mode
[17179573.988000] ACPI: (supports S0 S3 S4 S5)
[17179573.988000] Freeing unused kernel memory: 308k freed
[17179574.036000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179575.160000] Capability LSM initialized
[17179575.188000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[17179575.188000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179575.188000] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[17179575.188000] ACPI: Getting cpuindex for acpiid 0x1
[17179575.188000] ACPI: Thermal Zone [TZ01] (34 C)
[17179575.468000] SCSI subsystem initialized
[17179575.472000] libata version 1.20 loaded.
[17179575.472000] ahci 0000:00:1f.2: version 1.2
[17179575.472000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 217
[17179575.472000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[17179575.472000] ahci: probe of 0000:00:1f.2 failed with error -12
[17179575.476000] ata_piix 0000:00:1f.2: version 1.05
[17179575.476000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 217
[17179575.476000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179575.476000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x4810 irq 14
[17179575.652000] ata1: dev 0 cfg 49:0f00 82:746b 83:7f69 84:4063 85:f469 86:3f49 87:4063 88:203f
[17179575.652000] ata1: dev 0 ATA-7, max UDMA/100, 195371568 sectors: LBA48
[17179575.660000] ata1: dev 0 configured for UDMA/100
[17179575.660000] scsi0 : ata_piix
[17179575.660000]   Vendor: ATA       Model: HTS541010G9SA00   Rev: MBZO
[17179575.660000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179575.660000] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4818 irq 15
[17179575.824000] ata2: disabling port
[17179575.824000] scsi1 : ata_piix
[17179575.832000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[17179575.832000] sda: Write Protect is off
[17179575.832000] sda: Mode Sense: 00 3a 00 00
[17179575.832000] SCSI device sda: drive cache: write back
[17179575.832000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[17179575.832000] sda: Write Protect is off
[17179575.832000] sda: Mode Sense: 00 3a 00 00
[17179575.832000] SCSI device sda: drive cache: write back
[17179575.832000]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[17179575.952000] sd 0:0:0:0: Attached scsi disk sda
[17179576.380000] sata_sil 0000:06:08.0: version 0.9
[17179576.380000] ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 17 (level, low) -> IRQ 169
[17179576.380000] sata_sil 0000:06:08.0: Applying R_ERR on DMA activate FIS errata fix
[17179576.380000] ata3: SATA max UDMA/100 cmd 0xF8866080 ctl 0xF886608A bmdma 0xF8866000 irq 169
[17179576.380000] ata4: SATA max UDMA/100 cmd 0xF88660C0 ctl 0xF88660CA bmdma 0xF8866008 irq 169
[17179576.584000] ata3: SATA link down (SStatus 0)
[17179576.592000] scsi2 : sata_sil
[17179576.796000] ata4: SATA link down (SStatus 0)
[17179576.804000] scsi3 : sata_sil
[17179576.896000] ide0: I/O resource 0x1F0-0x1F7 not free.
[17179576.896000] ide0: ports already in use, skipping probe
[17179576.896000] ide1: I/O resource 0x170-0x177 not free.
[17179576.896000] ide1: ports already in use, skipping probe
[17179576.988000] usbcore: registered new driver usbfs
[17179576.988000] usbcore: registered new driver hub
[17179576.996000] USB Universal Host Controller Interface driver v3.0
[17179576.996000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 18 (level, low) -> IRQ 225
[17179576.996000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179576.996000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179576.996000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179576.996000] uhci_hcd 0000:00:1d.0: irq 225, io base 0x00004820
[17179576.996000] usb usb1: configuration #1 chosen from 1 choice
[17179576.996000] hub 1-0:1.0: USB hub found
[17179576.996000] hub 1-0:1.0: 2 ports detected
[17179577.008000] ieee1394: Initialized config rom entry `ip1394'
[17179577.100000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 22 (level, low) -> IRQ 233
[17179577.100000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179577.100000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179577.100000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179577.100000] uhci_hcd 0000:00:1d.1: irq 233, io base 0x00004840
[17179577.100000] usb usb2: configuration #1 chosen from 1 choice
[17179577.100000] hub 2-0:1.0: USB hub found
[17179577.100000] hub 2-0:1.0: 2 ports detected
[17179577.204000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
[17179577.204000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179577.204000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179577.204000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179577.204000] uhci_hcd 0000:00:1d.2: irq 225, io base 0x00004860
[17179577.204000] usb usb3: configuration #1 chosen from 1 choice
[17179577.204000] hub 3-0:1.0: USB hub found
[17179577.204000] hub 3-0:1.0: 2 ports detected
[17179577.308000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
[17179577.308000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179577.308000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179577.308000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179577.308000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x00004880
[17179577.308000] usb usb4: configuration #1 chosen from 1 choice
[17179577.308000] hub 4-0:1.0: USB hub found
[17179577.308000] hub 4-0:1.0: 2 ports detected
[17179577.340000] usb 1-1: new low speed USB device using uhci_hcd and address 2
[17179577.412000] ACPI: PCI Interrupt 0000:06:0b.0[A] -> GSI 22 (level, low) -> IRQ 233
[17179577.412000] PCI: Via IRQ fixup for 0000:06:0b.0, from 4 to 9
[17179577.412000] uhci_hcd 0000:06:0b.0: UHCI Host Controller
[17179577.412000] uhci_hcd 0000:06:0b.0: new USB bus registered, assigned bus number 5
[17179577.412000] uhci_hcd 0000:06:0b.0: irq 233, io base 0x00007000
[17179577.412000] usb usb5: configuration #1 chosen from 1 choice
[17179577.412000] hub 5-0:1.0: USB hub found
[17179577.412000] hub 5-0:1.0: 2 ports detected
[17179577.412000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 18 (level, low) -> IRQ 225
[17179577.412000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179577.412000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179577.516000] ACPI: PCI Interrupt 0000:06:0b.1[b] -> GSI 19 (level, low) -> IRQ 217
[17179577.516000] PCI: Via IRQ fixup for 0000:06:0b.1, from 10 to 9
[17179577.516000] uhci_hcd 0000:06:0b.1: UHCI Host Controller
[17179577.516000] uhci_hcd 0000:06:0b.1: new USB bus registered, assigned bus number 6
[17179577.516000] uhci_hcd 0000:06:0b.1: irq 217, io base 0x00007020
[17179577.516000] usb usb6: configuration #1 chosen from 1 choice
[17179577.516000] hub 6-0:1.0: USB hub found
[17179577.516000] hub 6-0:1.0: 2 ports detected
[17179577.520000] usb 1-1: configuration #1 chosen from 1 choice
[17179577.620000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[17179577.620000] ehci_hcd 0000:00:1d.7: debug port 1
[17179577.620000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179577.620000] ehci_hcd 0000:00:1d.7: irq 225, io mem 0xb0004000
[17179577.624000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.624000] usb usb7: configuration #1 chosen from 1 choice
[17179577.624000] hub 7-0:1.0: USB hub found
[17179577.624000] hub 7-0:1.0: 8 ports detected
[17179577.728000] ACPI: PCI Interrupt 0000:06:0b.2[C] -> GSI 16 (level, low) -> IRQ 177
[17179577.728000] PCI: Via IRQ fixup for 0000:06:0b.2, from 4 to 1
[17179577.728000] ehci_hcd 0000:06:0b.2: EHCI Host Controller
[17179577.728000] ehci_hcd 0000:06:0b.2: new USB bus registered, assigned bus number 8
[17179577.728000] ehci_hcd 0000:06:0b.2: irq 177, io mem 0xbc006400
[17179577.728000] ehci_hcd 0000:06:0b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.728000] usb usb8: configuration #1 chosen from 1 choice
[17179577.728000] hub 8-0:1.0: USB hub found
[17179577.728000] hub 8-0:1.0: 4 ports detected
[17179577.832000] ACPI: PCI Interrupt 0000:06:09.2[C] -> GSI 22 (level, low) -> IRQ 233
[17179577.880000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[233]  MMIO=[bc006800-bc006fff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[17179578.880000] usb 7-4: new high speed USB device using ehci_hcd and address 3
[17179579.012000] usb 7-4: configuration #1 chosen from 1 choice
[17179579.152000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0800460301ee0e93]
[17179579.196000] usb 1-1: USB disconnect, address 2
[17179579.196000] usbcore: registered new driver hiddev
[17179579.196000] usbcore: registered new driver libusual
[17179579.200000] Initializing USB Mass Storage driver...
[17179579.436000] usb 1-1: new low speed USB device using uhci_hcd and address 3
[17179579.616000] usb 1-1: configuration #1 chosen from 1 choice
[17179579.860000] usb 3-1: new full speed USB device using uhci_hcd and address 2
[17179580.036000] usb 3-1: configuration #1 chosen from 1 choice
[17179580.040000] scsi4 : SCSI emulation for USB Mass Storage devices
[17179580.040000] usb-storage: device found at 3
[17179580.040000] usb-storage: waiting for device to settle before scanning
[17179580.040000] usbcore: registered new driver usb-storage
[17179580.040000] USB Mass Storage support registered.
[17179580.056000] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input1
[17179580.056000] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1
[17179580.056000] usbcore: registered new driver usbhid
[17179580.056000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179580.136000] Attempting manual resume
[17179580.168000] kjournald starting.  Commit interval 5 seconds
[17179580.168000] EXT3-fs: mounted filesystem with ordered data mode.
[17179585.040000] usb-storage: device scan complete
[17179585.044000]   Vendor: PIONEER   Model: DVD-RW  DVR-K16D  Rev: 1.10
[17179585.044000]   Type:   CD-ROM                             ANSI SCSI revision: 00
[17179589.208000] Linux agpgart interface v0.101 (c) Dave Jones
[17179589.208000] agpgart: Detected an Intel 915GM Chipset.
[17179589.208000] agpgart: Detected 7932K stolen memory.
[17179589.228000] agpgart: AGP aperture is 256M @ 0xc0000000
[17179589.252000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179589.284000] hw_random: RNG not detected
[17179589.368000] tpm_inf_pnp 00:08: Found TPM0 with ID IFX0101
[17179589.368000] tpm_inf_pnp 00:08: TPM found: config base 0x4e, io base 0x4700, chip version 0x0006, vendor id 0x15d1 (Infineon), product id 0x0006 (SLD 9630 TT 1.1)
[17179589.404000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179589.804000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 185
[17179589.804000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179590.028000] input: PS/2 Mouse as /class/input/input2
[17179590.052000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[17179590.264000] ieee80211_crypt: registered algorithm 'NULL'
[17179590.380000] ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 20 (level, low) -> IRQ 185
[17179590.380000] Yenta: CardBus bridge found at 0000:06:09.0 [104d:81e8]
[17179590.380000] Yenta: Enabling burst memory read transactions
[17179590.380000] Yenta: Using CSCINT to route CSC interrupts to PCI
[17179590.380000] Yenta: Routing CardBus interrupts to PCI
[17179590.380000] Yenta TI: socket 0000:06:09.0, mfunc 0x00a01b22, devctl 0x64
[17179590.420000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[17179590.420000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[17179590.532000] ts: Compaq touchscreen protocol output
[17179590.612000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 185
[17179590.612000] Socket status: 30000006
[17179590.612000] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[17179590.612000] pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
[17179590.612000] cs: IO port probe 0x7000-0x7fff: clean.
[17179590.612000] pcmcia: parent PCI bridge Memory window: 0xbc000000 - 0xbc0fffff
[17179590.612000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x52ffffff
[17179590.612000] ACPI: PCI Interrupt 0000:06:09.3[b] -> GSI 21 (level, low) -> IRQ 50
[17179590.684000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 169
[17179590.684000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[17179590.684000] sky2 v1.6.1 addr 0xb8000000 irq 169 Yukon-EC (0xb6) rev 2
[17179590.684000] sky2 eth0: addr 00:13:a9:5a:54:4c
[17179590.752000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179590.752000]  4:0:0:0: Attached scsi generic sg1 type 5
[17179590.764000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq
[17179590.764000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[17179590.764000] Driver 'ipw2200' needs updating - please use bus_type methods
[17179590.764000] ACPI: PCI Interrupt 0000:06:0a.0[A] -> GSI 23 (level, low) -> IRQ 66
[17179590.764000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[17179591.096000] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[17179591.132000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[17179591.132000] Uniform CD-ROM driver Revision: 3.20
[17179591.132000] sr 4:0:0:0: Attached scsi CD-ROM sr0
[17179591.144000] cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f 0x370-0x377
[17179591.144000] cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[17179591.144000] cs: IO port probe 0x820-0x8ff: clean.
[17179591.144000] cs: IO port probe 0xc00-0xcf7: clean.
[17179591.148000] cs: IO port probe 0xa00-0xaff: clean.
[17179591.160000] sky2 eth0: enabling interface
[17179591.336000] lp: driver loaded but no devices found
[17179591.348000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179591.348000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179591.368000] Adding 1775140k swap on /dev/disk/by-uuid/8462a284-56dc-4d19-987a-02168fc3ac0b.  Priority:-1 extents:1 across:1775140k
[17179591.588000] EXT3 FS on sda3, internal journal
[17179591.904000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179591.980000] NTFS volume version 3.1.
[17179592.000000] kjournald starting.  Commit interval 5 seconds
[17179592.012000] EXT3 FS on sda2, internal journal
[17179592.012000] EXT3-fs: mounted filesystem with ordered data mode.
[17179592.036000] kjournald starting.  Commit interval 5 seconds
[17179592.036000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[17179592.048000] EXT3 FS on sda7, internal journal
[17179592.048000] EXT3-fs: mounted filesystem with ordered data mode.
[17179592.064000] kjournald starting.  Commit interval 5 seconds
[17179592.064000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[17179592.076000] EXT3 FS on sda8, internal journal
[17179592.076000] EXT3-fs: mounted filesystem with ordered data mode.
[17179592.232000] NET: Registered protocol family 17
[17179593.076000] ACPI Sony Notebook Control Driver v0.2 successfully installed
[17179593.152000] ACPI: ACPI Dock Station Driver
[17179593.168000] pcc_acpi: loading...
[17179593.188000] ibm_acpi: ec object not found
[17179593.420000] ACPI: Battery Slot [BAT1] (battery present)
[17179593.440000] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[17179593.444000] ACPI: Power Button (FF) [PWRF]
[17179593.444000] ACPI: Lid Switch [LID]
[17179593.444000] ACPI: Power Button (CM) [PWRB]
[17179593.452000] ACPI: AC Adapter [ACAD] (off-line)
[17179596.072000] [drm] Initialized drm 1.0.1 20051102
[17179596.088000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
[17179596.088000] [drm] Initialized i915 1.5.0 20060119 on minor 0
[17179597.484000] apm: BIOS not found.
[17179602.232000] sonypi: Sony Programmable I/O Controller Driver v1.26.
[17179602.236000] sonypi: detected type3 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
[17179602.236000] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
[17179602.236000] sonypi: device allocated minor is 62
[17179602.280000] input: Sony Vaio Jogdial as /class/input/input4
[17179602.364000] input: Sony Vaio Keys as /class/input/input5
[17179602.424000] sonypi command failed at drivers/char/sonypi.c : sonypi_call1 (line 647)
[17179602.468000] sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 658)
[17179602.508000] sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 660)
[17179602.552000] sonypi command failed at drivers/char/sonypi.c : sonypi_call1 (line 647)
[17179602.660000] vmmon: module license 'unspecified' taints kernel.
[17179602.668000] /dev/vmmon[4421]: Module vmmon: registered with major=10 minor=165
[17179602.668000] /dev/vmmon[4421]: Module vmmon: initialized
[17179602.772000] /dev/vmnet: open called by PID 4445 (vmnet-bridge)
[17179602.772000] /dev/vmnet: hub 0 does not exist, allocating memory.
[17179602.772000] /dev/vmnet: port on hub 0 successfully opened
[17179602.772000] bridge-eth0: enabling the bridge
[17179602.772000] bridge-eth0: up
[17179602.772000] bridge-eth0: already up
[17179602.772000] bridge-eth0: attached
[17179602.808000] /dev/vmnet: open called by PID 4459 (vmnet-natd)
[17179602.808000] /dev/vmnet: hub 8 does not exist, allocating memory.
[17179602.808000] /dev/vmnet: port on hub 8 successfully opened
[17179602.852000] /dev/vmnet: open called by PID 4460 (vmnet-netifup)
[17179602.852000] /dev/vmnet: hub 1 does not exist, allocating memory.
[17179602.852000] /dev/vmnet: port on hub 1 successfully opened
[17179602.860000] /dev/vmnet: open called by PID 4461 (vmnet-netifup)
[17179602.860000] /dev/vmnet: port on hub 8 successfully opened
[17179602.956000] Bluetooth: Core ver 2.8
[17179602.956000] NET: Registered protocol family 31
[17179602.956000] Bluetooth: HCI device and connection manager initialized
[17179602.956000] Bluetooth: HCI socket layer initialized
[17179602.988000] Bluetooth: L2CAP ver 2.8
[17179602.988000] Bluetooth: L2CAP socket layer initialized
[17179603.056000] Bluetooth: RFCOMM socket layer initialized
[17179603.056000] Bluetooth: RFCOMM TTY layer initialized
[17179603.056000] Bluetooth: RFCOMM ver 1.7
[17179603.068000] /dev/vmnet: open called by PID 4522 (vmnet-dhcpd)
[17179603.068000] /dev/vmnet: port on hub 1 successfully opened
[17179603.072000] /dev/vmnet: open called by PID 4529 (vmnet-dhcpd)
[17179603.072000] /dev/vmnet: port on hub 8 successfully opened
[17179610.896000] NET: Registered protocol family 10
[17179610.896000] lo: Disabled Privacy Extensions
[17179610.896000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17179610.896000] IPv6 over IPv4 tunneling driver
[17179610.904000] eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full.
[17179621.704000] eth1: no IPv6 routers present
[17179621.756000] vmnet8: no IPv6 routers present
[17179621.880000] vmnet1: no IPv6 routers present
[17179628.760000] ieee80211_crypt: registered algorithm 'TKIP'
[17179644.268000] eth1: no IPv6 routers present
[17179928.272000] tifm_7xx1: sd card detected in socket 3
piet@klaptop:~$

Offline profoX

  • Lid
    • wesley
    • Lionslink
  • Steunpunt: Nee
Ingebouwde kaartlezer
« Reactie #5 Gepost op: 2007/03/10, 21:58:38 »
Lijkt er toch op dat de kaart gedetecteerd wordt... Kan je de SD kaart niet mounten ofzo?

Als het niet automatisch aangekoppeld wordt:
sudo mount /dev/mmcblk0p1 /media/sd

Zie je trouwens niet meer bij dmesg over die kaart?
Human Knowledge Belongs To The World -- Antitrust (2001)
Nederlandstalige Ubuntu documentatie van Ubuntu-NL (wiki)

Offline Pjotr

  • Lid
    • http://sites.google.com/site/computertip
  • Steunpunt: Nee
Ingebouwde kaartlezer
« Reactie #6 Gepost op: 2007/03/10, 22:04:07 »
profoX, bedankt voor het meedenken! Helaas...... ik heb eerst de map sd aangemaakt in /media. Daarna jouw commando uitgevoerd in de terminal. Ik kreeg deze reactie:

piet@klaptop:~$ sudo mount /dev/mmcblk0p1 /media/sd
mount: speciale apparaat /dev/mmcblk0p1 bestaat niet
piet@klaptop:~$

Ik heb in mijn eerdere bijdrage de volledige uitdraai gepost van dmesg. De allerlaatste regel daarvan heeft het over het sd-kaartje in de kaartlezer:
[17179928.272000] tifm_7xx1: sd card detected in socket 3

Offline wutnubu

  • Lid
  • Steunpunt: Nee
Ingebouwde kaartlezer
« Reactie #7 Gepost op: 2007/03/11, 08:33:05 »
Hier is de ingebouwde kaartlezer /dev/sda1 en mount deze op /media/KODAK als ik er een kaartje insteek.

mount -l geeft:

/dev/sda1 on /media/KODAK type vfat (rw,nosuid,nodev,quiet,shortname=mixed,uid=1000,gid=1000,umask=077,iocharset=utf8) [KODAK]


Probeer eens mount -a als je er een kaart ingedaan hebt.
Vervolgens mount -l en post dat eens.

Edgy-Eft.

Groet

Offline Pjotr

  • Lid
    • http://sites.google.com/site/computertip
  • Steunpunt: Nee
Ingebouwde kaartlezer
« Reactie #8 Gepost op: 2007/03/11, 17:02:07 »
Allereerst mount -a:
piet@klaptop:~$ sudo mount -a
Password:
mount: speciale apparaat /dev/disk/by-uuid/20fbce1f-3ae1-4151-8897-29bb0bc98807 bestaat niet
piet@klaptop:~$

Het lijkt erop, alsof Ubuntu alleen mijn "verdwenen partitie" signaleert. Die ziet Ubuntu niet meer, sinds ik er DSL op heb geïnstalleerd. Waarom eigenlijk? Dapper ziet hem ook niet meer, en die werkt niet met UUID's.

Enfin, het SD-kaartje is al helemaal nergens te bekennen. Overigens: mijn harde schijf heet sda, omdat het een SATA schijf is.

Vervolgens mount -l:
piet@klaptop:~$ mount -l
/dev/sda3 on / type ext3 (rw,errors=remount-ro) [linux2]
proc on /proc type proc (rw,noexec,nosuid,nodev)
/sys on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
procbususb on /proc/bus/usb type usbfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
devshm on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/sda1 on /media/sda1 type ntfs (rw,nls=utf8,umask=007,gid=46) [Windows]
/dev/sda2 on /media/sda2 type ext3 (rw) [linux1]
/dev/sda7 on /media/sda7 type ext3 (rw) [linux4]
/dev/sda8 on /media/sda8 type ext3 (rw) [linux5]
/dev/sda9 on /media/sda9 type vfat (rw,utf8,umask=007,gid=46) [RESERVE]
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
piet@klaptop:~$

Wie kan er soep van koken?

Offline raggar

  • Lid
    • fietsen naar Tibet
  • Steunpunt: Ja
Ingebouwde kaartlezer
« Reactie #9 Gepost op: 2007/04/01, 21:14:52 »
Een tijdje terug heb ik het zelfde probleem gehad op een acer aspire 5600. Uiteindelijk ben ik eruit gekomen met deze how to. Misschien iets dat je kunt proberen?

https://wiki.ubuntu.com/LaptopTestingTeam/AcerAspire5601AWLMi/HowTo#head-1d524a1bbe9634283a733cec4e3d1cf57684079a