Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Waar zit mijn PocketPC nu ? Is PDA niet gemount ?  (gelezen 8185 keer)

andreh

  • Gast
Waar zit mijn PocketPC nu ? Is PDA niet gemount ?
« Gepost op: 2007/03/07, 00:08:04 »
Volgens mij wil mijn PocketPC anex PDA Mio P550 niet praten met ubuntu 06.06.
Hoe kan ik zien hoe het device heet en waar het zit ?

als ik dmesg in tik krijg ik
   
Citaat
[4294926.344000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[4295546.535000] usb 1-1: USB disconnect, address 3
[4295550.957000] usb 1-1: new full speed USB device using uhci_hcd and address 4
maar dan had toch ook al het device genoemd moeten worden ? dus iets als
   
Citaat
'usb 4-2: PocketPC PDA converter now attached to ttyUSB0'
In
"cat /proc/bus/usb/devices"
staat
   
Citaat
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=ef(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs=  1
P:  Vendor=3340 ProdID=a0a1 Rev= 0.00
S:  Manufacturer=Mitac Corporation
S:  Product=Mio DigiWalker USB Sync
S:  SerialNumber=e61dd285-1d1d-0604-0108-00022ac1fc92
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ef(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=1ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
waarbij
   
Citaat
Driver=(none)
me wat ongerust maakt.

Daarna dit commando uitgevoerd:
   
Citaat
sudo apt-get install librra0 librra0-tools librapi2-tools libsynce0 synce-dccm synce-multisync-plugin synce-serial
met o.a. dit als resultaat:
   
Citaat
synce-multisync-plugin is already the newest version.
synce-serial is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 72 not upgraded.
en nu denk ik dat het hier is mis gegaan:
   
Citaat
/dev/ttyUSB0
local address: 192.168.131.102
remote address: 192.168.131.201
no dns entry needed
die /dev/ttyUSB0 zie ik nergens, dus niet bij dmesg en ook niet in /dev met :

USER@ubuntu:~$ ls -rtl /dev/*SB*
ls: /dev/*SB*: No such file or directory


ls -rtl /dev/*sd*

Mijn vraag is dus:
Moet ik dit commando
  sudo synce-serial-config ttyUSB0
wel geven ?

Die ttUSB0 is toch niet goed ?


Is er trouwens ook iemand die iets uitgevoerd heeft met het volgende menu optie:

System>preferences>palm OS devices (from the main Ubuntu menu)
of
System>preferences>PDAs > PocketPC  (sync PocketPC's when connected)


andreh

  • Gast
Waar zit mijn PocketPC nu ? Is PDA niet gemount ?
« Reactie #1 Gepost op: 2007/03/07, 11:00:23 »
Goed,
ondertussen denk en hoop ik dat mijn oplossing hier vandaan moet komen:
http://ubuntuforums.org/showthread.php?t=149183&highlight=synce+dapper
http://www.opensync.org/
http://ubuntuforums.org/showthread.php?t=30936&page=9
http://article.gmane.org/gmane.comp.handhelds.ipaq.synce.general/375
http://www.sjoerdmulder.nl/wordpress/?p=4  --> Sync PDA with Solution
http://www.synce.org/index.php/Windows_Mobile_2005_HCL --> Mob '05 Compatibility test

http://ubuntuforums.org/showpost.php?p=1439469&postcount=101

Citaat
he Driver entry

Second you look at the Driver entry. Read more in the apropriate section below.

Driver=ipaq or Driver=usbserial Your kernel driver recognized your device, good!

Driver=(none) Your kernel driver did not recognize your device. You need to perform some special configuration:

1.

Only if your Linux kernel is 2.6.10 or later: please send a mail to synce-devel@lists.sourceforge.net and tell us...
1. your kernel version
2. brand and model of your device
3. vendor/product USB IDs for your device (see Vendor= and ProdID=)
2.

Follow the instructions in Appendix A to add options like this, but replace the red digits with the corresponding ones from the output from the command you ran earlier:

vendor=0x049f product=0x0003

3.

If you have the file /etc/rc.local, open it with a text editor and add this line in order to have things working directly next time you restart your computer:

/sbin/modprobe ipaq

4.

Now run these commands to reload the ipaq module:

rmmod ipaq
modprobe ipaq
http://ubuntuforums.org/showpost.php?p=1439469&postcount=101

Citaat
rs@ubuntu:~$ multisync
[plugin_init:915] here
plugin_API_version
short_name
long_name
plugin_init
[sync_connect:48] ----->
[synce_info_from_file:51] unable to open file: /home/USER/.synce/active_connection
[rapi_context_connect:97] Failed to get connection info
[synce_connect:291] Failed to initialize RAPI
[sync_connect:62] <-----
[sync_connect:48] ----->
[synce_info_from_file:51] unable to open file: /home/USER/.synce/active_connection
[rapi_context_connect:97] Failed to get connection info
[synce_connect:291] Failed to initialize RAPI
[sync_connect:62] <-----
[sync_disconnect:73] ----->
[synce_join_thread:260] synce_join_thread called when no thread is running
[sync_disconnect:79] <-----
[sync_disconnect:73] ----->
[synce_join_thread:260] synce_join_thread called when no thread is running
[sync_disconnect:79] <-----
en
      lsusb
geeft dit

Citaat
lsusb
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 002: ID 0dda:0001 Integrated Circuit Solution, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 003: ID 3340:a0a1 Yakumo
Bus 001 Device 001: ID 0000:0000
Dus geen regel aanwezig als dit:

Bus 002 Device 013: ID 03f0:1016 Hewlett-Packard Jornada 548 / iPAQ HW6515 Pocket PC

Citaat
noauto betekend dat die devices niet gemount worden bij de boot van de PC. Als het over USB-dingen gaat, dan is dat meestal wel wat je wilt. Sterker nog: je moet wel. Op het moment dat /etc/fstab wordt doorlopen bij de boot zijn de USB-drivers nog niet geladen. Bij de boot kan je dus geen USB-dingen mounten. Daarvoor moet je een commando toevoegen, ergens in een startupscript.
Als het over een USB-stick gaat, dan moet je die steeds opnieuw mounten. Er zijn ook weer programma's voor die herkennen dat je er een USB-stick in doet en dat die automatisch gemount word.
Citaat
Hij ziet ze inderdaad, maar ik zie bijv. niet dat hij de cardreader toewijst aan zoiets als /dev/sda1.
Gebeurt dat wel als er een kaart in de lezer zit (uitgaande dat dit niet het geval was..)?

Zo neen, dan denk ik dat er een probleem is met DBUS en/of HAL.

Kijk even met deze commandos of beide systemen draaien:

ps ax | grep dbus
ps ax | grep hal

Offline raydekok

  • Lid
    • http://www.kodekok.nl
  • Steunpunt: Nee
Waar zit mijn PocketPC nu ? Is PDA niet gemount ?
« Reactie #2 Gepost op: 2007/03/07, 12:58:23 »
opensync is een leuke inde gaten houden.
homemade HTPC

andreh

  • Gast
Waar zit mijn PocketPC nu ? Is PDA niet gemount ?
« Reactie #3 Gepost op: 2007/03/09, 16:03:43 »
Jammer..er is dus niemand die geprobeerd heeft een Pocket PC aan de praatte krijgen ?
Ik heb het gevoel dat de HP IPag en de HTC Qtek 9090 en 9100 meer geondersteund worden. In elk geval vond ik dit nog op Ubuntu Hacks:

Citaat
Bekijk hierna de Output van 'dmesg'  welk device aanwezig is.

Het ziet er naar uit dat met name HTC QTEK smartphones en HP IPAQ ondersteunt worden door linux en het mobil5 systeem nog niet.

sudo modprobe ipaq
Password:
dmesg | tail
[ 1738.233238] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 1738.796279] ipaq 1-1:1.0: PocketPC PDA converter detected
[ 1738.803167] usb 1-1: PocketPC PDA converter now attached to ttyUSB0

Citaat
Unfortunately, this probably won't work with a Pocket PC that's too new. At the time of this writing, SynCE did not yet support the most recent Pocket PC operating system, Windows Mobile 5.0.
Citaat
Testing the Connection
Now it's time to give it a try. Make sure your Pocket PC is connected to your computer, and start the dccm daemon. Without arguments, it will run in the background. Since this is its first time out, I suggest starting it in the foreground (-f) with debugging enabled (-d 4):
bjepson@ubuntu:~$ dccm -d 4 -f
dccm[4599]: Running in foreground
dccm[4599]: Listening for connections on port 5679

Open another terminal and start up SynCE:
tarzan@ubuntoo2:~$ sudo synce-serial-start
synce-serial-start is now waiting for your device to connect
Hmm.. de beste oplossing lijkt toch te zoeken op PocketPC op  http://www.ubuntuforums.org
http://www.ubuntuforums.org/search.php?searchid=15934402&pp=25&page=2

Theejoo

  • Gast
Waar zit mijn PocketPC nu ? Is PDA niet gemount ?
« Reactie #4 Gepost op: 2007/03/10, 07:33:07 »
Citaat
Hmm.. de beste oplossing lijkt toch te zoeken op PocketPC op
Werkt jouw beste oplossing dan nu ook.?

Mijn pda werkt met Activesynce en wat ik heb vernomen is, dat deze niet communiceerd met Hotsynce of Multisync.
Er is ook of bestaat een mogelijkheid om een linux variant op de pda te zetten, en heb ik willen doen, en zo dom ben ik nu ook weer niet want mijn gps software draait alleen onder windows. Dus als ik dit had gedaan was het balen, weer een nieuwe halen, das pech  centen weg,

Offline Pjotr

  • Lid
    • http://sites.google.com/site/computertip
  • Steunpunt: Nee
Waar zit mijn PocketPC nu ? Is PDA niet gemount ?
« Reactie #5 Gepost op: 2007/03/10, 10:46:29 »
Altijd backups en images maken voordat je ingrijpende dingen gaat doen met je PC of je pocket PC, Theejoo, dan hoef je nooit bang te zijn dat je de zaak onherroepelijk verpest.  :-)

Groet, Pjotr.

andreh

  • Gast
Waar zit mijn PocketPC nu ? Is PDA niet gemount ?
« Reactie #6 Gepost op: 2007/03/10, 11:55:57 »
Sorry, Nee het lijkt er op dat of Windows mobiel 2005 niet ondersteunt wordt (ik probeer nu te kijken hoe dat zit met DEV binnen Multisyn en zo) en Mio Mitac niet. Wel lijken HP Ipaq en Palm ondersteunt te worden en was het eenvoudiger om een Pocket PC te koppelen aan Ubuntu versies LAGER dat Dapper Drake 06.06 (howry/.  
Theejoo, ik zou wel heel graag willen weten welke OS je draait (2003/2005) en welk type je hebt.

Het DEV team wil in elk geval weten welke kernel je draait, Welk Vendor id en product id het is en nog iets..




-----------------

uname -a:

USER@ubuntu:~$ uname -a
Linux ubuntu 2.6.15-28-386 #1 PREEMPT Thu Feb 1 15:51:56 UTC 2007 i686 GNU/Linux
USER@ubuntu:~$

-----------------

Mitac Mio P550 Digiwalker
Pocket PC

--------------

Vendor=3340
ProdID=a0a1





T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=ef(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs=  1
P:  Vendor=3340 ProdID=a0a1 Rev= 0.00
S:  Manufacturer=Mitac Corporation
S:  Product=Mio DigiWalker USB Sync
S:  SerialNumber=e61dd285-1d1d-0604-0108-00022ac1fc92

C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ef(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=1ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms

Theejoo

  • Gast
Waar zit mijn PocketPC nu ? Is PDA niet gemount ?
« Reactie #7 Gepost op: 2007/03/11, 12:08:57 »
@pjotr123 dat klopt om eerst te gaan backuppen voordat enz, enz,

Voor mij heeft deze ingrijpende verandering op mijn pocket pc geen enkel nut, omdat ik geen zin en tijd heb om voor andere alternatieve vervangende programma's te gaan zoeken o.a de gps software, bluetooth, draadloose sateliet verbinding, en internet connection om deze al maar op te noemen.
Het was leuk geweest zou de pocket pc via linux werken met sync, hotsync of multisinc en dat doet ie niet.
Op de pda staat windows mobile en op mijn desktop staat xp pro, opstarten, aansluiten en connectie vindt plaats.

@andreh

theo@theo-desktop:~$ uname -a
Linux theo-desktop 2.6.17-11-generic #2 SMP Thu Feb 1 19:52:28 UTC 2007 i686 GNU/Linux
theo@theo-desktop:~$

De rest heb ik niet

Offline Ron

  • Forumteam
    • r0n
    • Dwarsligger
  • Steunpunt: Ja
Waar zit mijn PocketPC nu ? Is PDA niet gemount ?
« Reactie #8 Gepost op: 2007/03/11, 12:12:06 »
Hallo Theo,
hier krijg ik mijn Mio 510 ook niet aan de praat, mocht je iets ontdekken, dan hoor ik dat graag !

Ron
OpenStandaard evangelist, OpenSource promotor, OpenData liefhebber.
Xubuntu gebruiker en voorstander (XFCE).
In Nederland bekend als een dwarsligger.

andreh

  • Gast
Waar zit mijn PocketPC nu ? Is PDA niet gemount ?
« Reactie #9 Gepost op: 2007/03/13, 14:37:35 »
Building SynCE with Windows Mobile 2005 support from Subversion
http://www.synce.org/index.php/Building_SynCE_with_Windows_Mobile_2005_support_from_SourceForge_Packages_and_Subversion

http://www.opensync.org/wiki/DeviceCompatibilityList

Citaat
LDAP Plugin
Moto Plugin
Opie Plugin
Palm Plugin
Python Plugin
Sunbird Plugin
Synce Plugin ¶
How could i sync my WM5 device?

The libopensync-plugin-synce in OpenSync is currently not able to sync with WM5 devices.
There exist a in project for syncing OpenSync with WM5 Devices.
SyncML


http://www.opensync.org/wiki/syncml-guide
I got Error XYZ ... what does it mean?

[http://libsyncml.opensync.org/wiki/ErrorCodes]
http://www.opensync.org/wiki/DeviceCompatibilityList


Building SynCE with Windows Mobile 2005 support from Subversion
http://www.synce.org/index.php/Building_SynCE_with_Windows_Mobile_2005_support_from_SourceForge_Packages_and_Subversion

Voormalig PalmOS gaat open SOurce
http://www.access-company.com/products/linux/alp.html

http://forum.ubuntu-nl.org/topic/8159


Is er trouwens ook iemand die iets uitgevoerd heeft met het volgende menu optie (mogelijk afkomstig van Multi Sync):

System>preferences>palm OS devices (from the main Ubuntu menu)
of
System>preferences>PDAs > PocketPC  (sync PocketPC's when connected)




En onder KUBUNTU

http://ubuntuforums.org/showthread.php?p=1010421

Citaat
Re: synce: sync pocket pc with kontact under kde 3.5?
Hello

One week ago I spent one sunday afternoon trying to compile all the things needed to sync my PocketPC with KDEPIM. When it finally worked, I wrote a quite long howto, so that I will be able to do it again if necessary.

I tried this howto on a clean Kubuntu computer and the compilation worked.

Please do FIRST set up synce-serial to connect to your Pocket PC and if this works THEN you can go on with this howto.

At the moment I must disable my firewall Firestarter to sync.

For a general howto on how to connect your pocket pc with ubuntu, have a look a t the official synce- website

http://synce.sourceforge.net/synce/

################################################## ############
# HOWTO Connect and synchronize a PocketPC 2002 with KDE 3.5 #
################################################## ############

### How to install the required software ###

# Install required packages

sudo apt-get install -y kdepim

sudo apt-get install -y build-essential
sudo apt-get remove -y autoconf
sudo apt-get install -y automake1.6
sudo apt-get install -y cvsutils
sudo apt-get install -y libtool
sudo apt-get install -y xlibs-dev
sudo apt-get install -y libavahi-qt3-dev
sudo apt-get install -y qt4-dev-tools
sudo apt-get install -y kdelibs4-dev
sudo apt-get install -y libunshield-dev
sudo apt-get install -y libdynamite-dev
sudo apt-get install -y liborange-dev
sudo apt-get install -y kdepim-dev

sudo apt-get install -y librapi2-dev
sudo apt-get install -y libmimedir-dev

# Install the basic synce connector

sudo apt-get install -y synce-serial synce-dccm
# click 4 times OK

# starting compiling the required packages

mkdir synce
cd synce

cvs -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/synce login
# Press ENTER
cvs -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/synce login
# Press ENTER


# Compile libsynce from CVS

cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/synce co -P libsynce
cd libsynce/
export CC=/usr/bin/gcc-3.4
./bootstrap
export CC=/usr/bin/gcc-3.4
./configure -prefix=/usr
make
sudo make install

cd ..

# Compile librra from CVS

cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/synce co -P rra
cd rra
export CC=/usr/bin/gcc-3.4
./bootstrap
export CC=/usr/bin/gcc-3.4
./configure -prefix=/usr
make
sudo make install

cd..

# Compile synce-kde from CVS

cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/synce co -P synce-kde
cd synce-kde/
export CC=/usr/bin/gcc-3.4
./bootstrap
./configure -prefix=/usr
make
sudo make install

cd ..

# Compile kde-konnector from CVS

cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/synce co -P konnector
cd konnector/
export CC=/usr/bin/gcc-3.4
./bootstrap
export CC=/usr/bin/gcc-3.4
./configure -prefix=/usr
make
sudo make install


### How to connect PocketPC2002 with Ubuntu ###

- start raki: [Alt] + [F2] write raki and press [ENTER], select vdccm
- connect your PocketPC with the USB Cradle

sudo synce-serial-start

# If Raki icon is colorful in taskbar, your device is successfully connected.
# Left click on the Raki icon. You see your device name.
# Now you can install CAB files to your device, browse in it, remove software,
# see memory and power status.


### How to automize starting of synce-serial-start when connection your device ###

sudo echo "BUS!="usb", ACTION!="add", KERNEL!="ttyUSB*", GOTO="synce_rules_end"
SYSFS{idVendor}=="YOUR_VENDOR", SYSFS{idProduct}=="YOUR_PRODUCT", RUN+="/usr/bin/synce-serial-start"
LABEL="synce_rules_end"" > /etc/udev/rules.d/1_pocketpc_synce.rules

kdesu kate /etc/udev/rules.d/1_pocketpc_synce.rules &

# Now you have to change the following to parameters
# YOUR_VENDOR and YOUR_PRODUCT
# you will find the appropriate paramaters by using
less /proc/bus/usb/devices
# and watching the last block containing "Driver=ipaq"
# now search for
# Vendor=YOUR_VENDOR ProdID=YOUR_PRODUCT Rev= 0.00
# and change it in the text file
# Close kate and press [ENTER] in the shell


### How to synchronize with KDEPIM (kontact, korganizer, kaddressbook, kmail) ###

# after having done "How to connect PocketPC2002 with Ubuntu" your device is connected and the raki
# ico is colorful.

- right click on the colorized raki icon in the taskbar, choose your device and klick on Konfiquration ...
- If you've got a passwordon your device the enter it
- Choose Appointment, Contact and Task
- For each one of them you have to click on Config on choose the right adressbook and calendar to synchronize
- Now you can synchronize by right clicking on the colorised raki taskbar icon, choose your device and click on Synchronisation


----------------------------------------------------------------------------------------------------------
Sources

http://www.serotizm.com/howtos/syncekonnector-0.2.html
http://www.kolab.org/pipermail/kolab...il/004732.html
http://de.gentoo-wiki.com/Verbindung...C3%BCber_SynCE
----------------------------------------------------------------------------------------------------------
last update: 7.5.2006

================================================== ================================================== ======
  #6  
 May 12th, 2006



http://ubuntuforums.org/showthread.php?p=1010421

andreh

  • Gast
Waar zit mijn PocketPC nu ? Is PDA niet gemount ?
« Reactie #10 Gepost op: 2007/03/15, 17:41:22 »
Hoi,

Is er trouwens iemand die een van de volgende toestellen werkend/verbonden  heeft gekregen onder Linux ?

Een smartphone met GPS (SPV M2000/QTEK 9090/HTC Blue Angel/MDA III of een SPV M3000/QTEK9100/HTC Wizard/MDA Vario )

of

een PDA met GPS ( Mio P350 , Mio P550 , QTEC g100 of ASUS 632N ) .



Hoi,
Is er trouwens iemand die een van de volgende toestellen werkend/verbonden  heeft gekregen onder Linux ?

Een smartphone met GPS (SPV M2000/QTEK 9090/HTC Blue Angel/MDA III of een SPV M3000/QTEK9100/HTC Wizard/MDA Vario )

of

een PDA met GPS ( Mio P350 , Mio P550 , QTEC g100 of ASUS 632N ) .



Uit de Linux Bible (een zeer goed boek !!) pag 508 Settings vor PDA Synchronisation
Citaat
Configuring PDA and Smart Phone Recognition
The GNOME desktop recognizes PDAs running the Palm OS, PDAs running Microsoft Windows CE, PDAs
running Microsoft Windows, Pocket PC edition, and most types of smart phones running any of these oper-
ating systems, and can be configured to automatically run specific applications when a device running the
Palm OS or some teeny, tiny version of Windows is connected and you request synchronization. These are
all considered to be PDAs by Ubuntu Linux. Configuring how and if your system recognizes different types
of PDAs is done by selecting the System ➪ Preferences ➪ Removable Drives and Media Preferences, and
then selecting the PDAs tab, as shown in the dialog in Figure 17.3.

    * PDAs running Palm OS: Select the Sync Palm devices when connected checkbox to activate a
         specified application when you request synchronization from your Palm. When this checkbox is
         selected, Ubuntu is configured to run the gpilotd-control-applet panel applet when a
         Palm Sync event is detected. You can specify another application or shell script to run on sync
         by clicking Browse and navigating to that application in the Select program to sync Palm device
         dialog that displays.
    * PDAs running Microsoft Windows: Select the Sync PocketPC devices when connected check-
         box to activate a specified application when you request synchronization from your PocketPC
         or other Windows CE device. When this checkbox is selected, Ubuntu is configured to run the
         multisync application when a PocketPC Sync event is detected. You can specify another appli-
         cation or shell script to run on sync by clicking Browse and navigating to that application in the
         Select program to sync PocketPC device dialog that displays.
Depending on the operating system that your PDA uses, you must configure the gpilotd-control-
applet or multisync
applications before you can successfully synchronize data in either direction. See
“PDAs, Smart Phones, and Ubuntu�  later in this chapter for details.

PDAs, Smart Phones, and Ubuntu
Personal Digital Assistants are a great tool for simple tasks such as managing calendars and making quick
notes. If yours is network-enabled and your eyesight is good enough, it’s also possible to browse the Web,
send and receive e-mail, and even work with documents in a variety of popular desktop software formats,
all from a device that you can easily tuck into a purse or shirt pocket. All of the software that you need to
synchronize a PDA that runs the Palm OS comes preinstalled on your Ubuntu system, and the software to
synchronize a Microsoft Windows for PocketPC or Microsoft Windows CE PDA is just a repository away.
The next two sections discuss how to install, configure, and use the software that you’ll need to synchronize
almost any PDA with the data stored on your Ubuntu Linux system.

Configuring and Synchronizing Palm OS Devices
 As discussed in “Configuring PDA and Smart Phone Recognition�  earlier in this section, a standard Ubuntu
 Linux installation includes a panel applet called gpilot. (This application is also sometimes referred to as
 gnome-pilot, its package name, or as pilot-link.) The section of Chapter 5 entitled “Customizing
 Panel Contents�  explained how to add an applet to the panel — in a nutshell, click on the panel, select the
 applet that you want to add from the dialog that displays, and drag it to the panel location where you want
 it to appear. The panel applet synchronizing with PDA running the Palm OS is called “Pilot Applet,�  and is
 located in the utilities section of the Add to Panel dialog.
 Once you add the gpilot applet to your panel, you’ll need to configure how it communicates with your
 Palm.
                 The first time that you start the gpilot applet, it displays a wizard that walks you through the
TIP              configuration process. These steps are the same as those discussed in this section and occur in
 the same sequence. This section discusses them as manual steps because the gpilot wizard only runs the
 first time that you start gpilot — if you ever need to reconfigure or modify your synchronization settings,
 you’ll need to do that manually, as described in this section.
 To configure your synchronization settings, click the gpilot icon in the panel.

De Ubuntu bible is overigens een zeer goed boek

Offline Pjotr

  • Lid
    • http://sites.google.com/site/computertip
  • Steunpunt: Nee
Waar zit mijn PocketPC nu ? Is PDA niet gemount ?
« Reactie #11 Gepost op: 2007/03/15, 17:56:41 »
Probeer het Engelstalige forum eens, en benut de zoekfunctie:
http://www.ubuntuforums.org/

andreh

  • Gast
Waar zit mijn PocketPC nu ? Is PDA niet gemount ?
« Reactie #12 Gepost op: 2007/03/16, 00:57:17 »
Hoi,

Ik krijg de indruk dat Windows mobile 2005 en 2003 niet aan de praat te krijgen is, maar alle Palm Tops, HP en Dell machines wel.
Verder wil het onder KDE beter dan onder GNOME en onder Ubuntu 05.04 beter dan onder 06.06. Ook met Nokia toestellen zijn wel succesverhalen te vinden.
Echter een combinatie Ubunut 06.06, een hoge Windows Mobile versie zoals 2005
 (heb je naast Windows mobile 2003 ook nog Windows mobile 2005, Windows mobile 2005 smartphone, Mobile 6 (zeer recent geintroduceerd) en Mobile 5)
en GNOME dan valt het NIET mee volgens mij.

Maar ik hoop nog op iemand die me nog eens alles kan vertellen.
Multisync is een interface
Opensync is de architectuur die vooral voor Nokia werkt
http://www.opensync.org/
http://www.opensync.org/wiki/FAQ
http://www.synce.org/index.php/Syncing_via_OpenSync
http://www.opensync.org/wiki/DeviceCompatibilityList

Hoe zit dat met de Pocket PC
http://forum.ubuntu-nl.org/message/84120#p84120
http://ubuntu-forums.nl/viewtopic.php?t=2379&highlight=pocketpc
http://forum.nedlinux.nl/viewtopic.php?id=25128
http://www.microsoft.com/netherlands/windowsmobile/functieoverzicht.aspx


Vervangers voor windows software.
http://www.linuxrsp.ru/win-lin-soft/table-eng.html
http://www.linux.ie/newusers/alternatives.php

HOWTO is based on syncing my Dell Axim X3i with Evolution, but it should carry over to IPAQs and other Pocket PCs
http://www.ubuntuforums.org/archive/index.php/t-30936.html

Connecten met mobile phone MDA VARIO
http://forum.ubuntu-nl.org/topic/8159

Sync your Pocket PC with Ubuntu Dell Axim Pocket PC with Ubuntu Edgy.
I have reached the point of establishing the connection with my pocket PC and listing the files in there. I haven’t yet started working on syncing Evolution or other programs with my pocket PC. I’m not sure if the instructions here will work with new pocket PCs (with new Windows mobile OS).
http://www.blog.arun-prabha.com/2007/02/21/how-to-sync-your-pocket-pc-with-ubuntu/



Connecten met mobile phone MDA VARIO
http://forum.ubuntu-nl.org/topic/8159

Sync your Pocket PC with Ubuntu Dell Axim Pocket PC with Ubuntu Edgy.
I have reached the point of establishing the connection with my pocket PC and listing the files in there. I haven’t yet started working on syncing Evolution or other programs with my pocket PC. I’m not sure if the instructions here will work with new pocket PCs (with new Windows mobile OS).
http://www.blog.arun-prabha.com/2007/02/21/how-to-sync-your-pocket-pc-with-ubuntu/

Citaat
http://www.mail-archive.com/synce-devel@lists.sourceforge.net/index.html#00398

I'm trying to connect a pocket pc to Ubuntu 6.10. When I connect the
device Linux seems to pick it up correctly but then disconnects almost
immediately. Below is the output from dmesg. I've
checked /proc/bus/usb/devices and for a short while it also lists the
device correctly. Does anyone have any suggestions?

   Thanks,
    Rich


[17187573.004000] usb 3-2: new full speed USB device using uhci_hcd and
address 4
[17187573.172000] usb 3-2: configuration #1 chosen from 1 choice
[17187573.172000] ipaq 3-2:1.0: PocketPC PDA converter detected
[17187573.176000] usb 3-2: PocketPC PDA converter now attached to


http://www.mail-archive.com/synce-devel@lists.sourceforge.net/index.html#00398

http://sourceforge.net/mailarchive/forum.php
Citaat
Artikel Januari 2007The purpose of this guide is to allow newer WM5 devices like HTC Wizard, Prophet to connect to Ubuntu Edgy 6.10and be able to share files, install stuff. This guide will take about one hour to complete, depending on your skills etc.
First, let's install synce-trayicon. It won't work yet, but when we're done, it will give you a tray icon like this:

http://ubuntuforums.org/showthread.php?p=2181420
Citaat
Connecting your Windows Mobile 2005 device via USB (usb-rndis-lite)
These instructions let you connect your Windows Mobile 2005 device, via USB, to your computer, using the usb-rdnis-lite kernel module.
http://www.synce.org/index.php/Connecting_your_Windows_Mobile_2005_device_via_USB_%28usb-rndis-lite%29
Citaat
http://foro.todopocketpc.com/showthread.php?s=59148f9f773e8050d21dd70da79318fc&t=133646&page=3
Buscando por ahí la forma de instalar Linux en mi iPaq (misión imposible por ahora, según parece) me he encontrado con esto. Se refiere a la iPaq 1950, modelo que lleva incluido WM5.

Cita textual:
No funciona en Linux. Parece que el problema está en el protocolo de comunicaciones RNDIS del nuevo Windows Mobile 5.0 porque en
anteriores versiones si que funciona la sincronización. El protocolo está cerrado a cal y canto para que sólo se pueda comunicar con lo que Microsoft dicte y mande, como no.
Por tanto no entiendo como hay gente que ha conseguido conectar una PDA con WM5 a Ubuntu Edgy

RECTIFICO: sí es posible instalar linux en la rx1950, hay quien lo ha conseguido. Ahora solo me falta aprender ruso http://foro.todopocketpc.com/showthread.php?s=59148f9f773e8050d21dd70da79318fc&t=133646&page=3
Citaat
SYNCE overzicht email lijst Synchronisatie UBUNTU
http://www.mail-archive.com/synce-devel@lists.sourceforge.net/index.html#00398
Citaat
Email Archive: synce-windowsmobile5 (read-only)
WM5 devices are not supported via the HOWTO.
See the Windows Mobile 5 mailing list archives for info on how to
connect your WM5 device:
http://sourceforge.net/mailarchive/forum.php?forum_id=47384
Citaat
Artikel oktober 2006
La synchronisation evolution/pocketPC enfin Possible pour tous!
Ces derniers temps j'ai essayé d'aider quelques personnes �  synchronniser leur PPC avec evolution (http://forum.ubuntu-fr.org/viewtopic.php?id=44245)... Je me suis rendu compte que j'étais assez chanceux car mon Qtek S100 fonctionne �  peu près bien. J'ai dit �  peu près car j'avais toujours quelques petits "bugs" de synchronisation... Des évennements ou des contacts qui refusent de se synchroniser par exemple... Donc j'ai poursuivi mes recherches pour essayer de trouver LA solution de synchronisation universelle.
Et je suis tombé sur ça:
http://www.funambol.com/
Citaat
Gebruik van synchronisatie bij Evolution: Via Synce
Outil de synchronisation pour evolution : syncevolution
http://doc.ubuntu-fr.org/syncevolution
Citaat
http://www.funambol.com/
Funambol provides push email, PIM synchronization, and device management for mobile devices, with all the advantages of open source software.
We are the de facto standard implementation of SyncML, giving you greater strategic freedom and lower costs. We're also:
    * The world’s most popular mobile open source software project
    * Compatible with over 75% of the mobile phones shipping today
    * In production use on 5 continents
Funambol v3 GA software offers customized versions for mobile carriers, the open source community and enterprises.
Funambol v3 supports hundreds of devices for PIM synchronization and will support an
increasing number of mobile devices for push email over the coming months. Push email
is supported on Windows Mobile PocketPCs today with support for Windows Mobile
Smartphones coming soon. The company is working with major device manufacturers to
include SyncML 1.2 for push email on their new devices. Funambol will release a J2ME
email client for Java phones, initially for the Motorola RAZR, early next year. Funambol
provides open source plug-ins that sync PIM data on BlackBerries and Palms and is
working with the community and third parties to add support for push email.


http://www.funambol.com/
Citaat
http://de.wikipedia.org/wiki/Multisync
OpenSync ist ein Computerprogramm zur Synchronisation von Adressen, Kalendereinträgen und anderen Daten zwischen verschiedenen Geräten wie Computern, PDAs oder Handys.

Das Programm ist modular aufgebaut und Plugin-basiert. Die Synchronisation zwischen zwei Parteien A und B läuft dabei über die für A und B zuständigen Plugins ab, dabei können A und B sowohl Geräte als auch Programme sein. Sobald sich ein Datensatz einer Partei ändert, wird diese Änderung bei der anderen Partei repliziert. Es ist auch möglich, nur in eine Richtung oder auch automatisch zu synchronisieren, wenn sich z. B. ein Gerät in Reichweite befindet. Das Plugin-Konzept erlaubt eine einfache Anpassung des Programms an neue Geräte oder Programme, denn es muss lediglich ein neues Plugin erstellt werden, während die Synchronisationslogik immer gleich bleibt.
Seit 22. April 2006 ist das Projekt der offizielle Nachfolger von Multisync geworden.

 Plugins [Bearbeiten]

Im Moment sind folgende Plugins für Opensync verfügbar:

    * Ximian Evolution / Evolution 2 Synchronisation (Kalender, ToDos und Kontakte)
    * IrMC Mobile Client Synchronisation via Bluetooth-, Infrarot- oder kabelgebundener Verbindung (wird von vielen Handys unterstützt).
    * Synce Plugin für WinCE 2003 Geräte
    * Opie und Zaurus Synchronisation.
    * SyncML Support (erlaubt auch eine verschlüsselte Verbindung zweier Multisync-Instanzen über das Internet).
    * Palm Synchronisation.
    * LDAP Synchronisation.
    * Plugin zu Synchronisation mit KDE PIM
    * Plugin zur Filesynchronisation von PIM Daten und anderen Dateien / Verzeichnissen.
    * Gnokii Plugin zur Synchronisation über [1].
    * Sunbird Plugin für dir Synchronisation über WebDAV.
    * Moto Plugin für Synchronisation zu Motorola L7 oder RAZR.
    * Google Calendar Plugin
    * Jescs Plugin (Java Enterprise System Calendar)

    * Windows CE / Pocket PC Synchronisation für WM5. Dieses Plugin ist Teil des SynCE-Projektes und kann von dort heruntergeladen werden.

http://de.wikipedia.org/wiki/Multisync
http://de.wikipedia.org/wiki/Microsoft_Pocket_PC
Citaat
http://www.synce.org/index.php/Windows_Mobile
http://www.synce.org/index.php/SynCE-Wiki
http://www.synce.org/index.php/Windows_Mobile_2005_Support
http://www.funambol.com/opensource/
Windows Mobile is a compact operating system combined with a suite of basic applications for mobile devices based on the Microsoft Win32 API. Devices which run Windows Mobile include Pocket PCs, Smartphones, and Portable Media Centers. It is designed to be somewhat similar to desktop versions of Windows.[1]
SynCE has support for Smartphones and Pocket PCs, using Windows CE, Windows Mobile 2003 and Windows Mobile 2005.
http://www.synce.org/index.php/Windows_Mobile

http://www.synce.org/index.php/SynCE-Wiki
Windows Mobile 2005, originally codenamed "Magneto", was released on May 9, 2005. It is powered by Windows CE 5.0 and uses the .NET Compact Framework 1.0 SP2 — an environment for programs based on .NET to be used.
SynCE has support for Windows Mobile 2005, on its support pages.

http://www.synce.org/index.php/Windows_Mobile
http://www.synce.org/index.php/SynCE-Wiki
http://www.synce.org/index.php/Windows_Mobile_2005_Support
http://www.funambol.com/opensource/
Citaat
k heb mijn palm aan de sync gekregen via kpilot
Citaat
http://www.funambol.com/
Funambol provides push email, PIM synchronization, and device management for mobile devices, with all the advantages of open source software.
We are the de facto standard implementation of SyncML, giving you greater strategic freedom and lower costs. We're also:
    * The world’s most popular mobile open source software project
    * Compatible with over 75% of the mobile phones shipping today
    * In production use on 5 continents
Funambol v3 GA software offers customized versions for mobile carriers, the open source community and enterprises. Read More »
http://www.funambol.com/
Citaat
http://de.wikipedia.org/wiki/Multisync
OpenSync ist ein Computerprogramm zur Synchronisation von Adressen, Kalendereinträgen und anderen Daten zwischen verschiedenen Geräten wie Computern, PDAs oder Handys.

Das Programm ist modular aufgebaut und Plugin-basiert. Die Synchronisation zwischen zwei Parteien A und B läuft dabei über die für A und B zuständigen Plugins ab, dabei können A und B sowohl Geräte als auch Programme sein. Sobald sich ein Datensatz einer Partei ändert, wird diese Änderung bei der anderen Partei repliziert. Es ist auch möglich, nur in eine Richtung oder auch automatisch zu synchronisieren, wenn sich z. B. ein Gerät in Reichweite befindet. Das Plugin-Konzept erlaubt eine einfache Anpassung des Programms an neue Geräte oder Programme, denn es muss lediglich ein neues Plugin erstellt werden, während die Synchronisationslogik immer gleich bleibt.
Seit 22. April 2006 ist das Projekt der offizielle Nachfolger von Multisync geworden.

 Plugins [Bearbeiten]

Im Moment sind folgende Plugins für Opensync verfügbar:

    * Ximian Evolution / Evolution 2 Synchronisation (Kalender, ToDos und Kontakte)
    * IrMC Mobile Client Synchronisation via Bluetooth-, Infrarot- oder kabelgebundener Verbindung (wird von vielen Handys unterstützt).
    * Synce Plugin für WinCE 2003 Geräte
    * Opie und Zaurus Synchronisation.
    * SyncML Support (erlaubt auch eine verschlüsselte Verbindung zweier Multisync-Instanzen über das Internet).
    * Palm Synchronisation.
    * LDAP Synchronisation.
    * Plugin zu Synchronisation mit KDE PIM
    * Plugin zur Filesynchronisation von PIM Daten und anderen Dateien / Verzeichnissen.
    * Gnokii Plugin zur Synchronisation über [1].
    * Sunbird Plugin für dir Synchronisation über WebDAV.
    * Moto Plugin für Synchronisation zu Motorola L7 oder RAZR.
    * Google Calendar Plugin
    * Jescs Plugin (Java Enterprise System Calendar)

    * Windows CE / Pocket PC Synchronisation für WM5. Dieses Plugin ist Teil des SynCE-Projektes und kann von dort heruntergeladen werden.

http://de.wikipedia.org/wiki/Multisync
http://de.wikipedia.org/wiki/Microsoft_Pocket_PC
Citaat
http://www.synce.org/index.php/Windows_Mobile
http://www.synce.org/index.php/SynCE-Wiki
http://www.synce.org/index.php/Windows_Mobile_2005_Support
http://www.funambol.com/opensource/
Windows Mobile is a compact operating system combined with a suite of basic applications for mobile devices based on the Microsoft Win32 API. Devices which run Windows Mobile include Pocket PCs, Smartphones, and Portable Media Centers. It is designed to be somewhat similar to desktop versions of Windows.[1]
SynCE has support for Smartphones and Pocket PCs, using Windows CE, Windows Mobile 2003 and Windows Mobile 2005.
http://www.synce.org/index.php/Windows_Mobile

http://www.synce.org/index.php/SynCE-Wiki
Windows Mobile 2005, originally codenamed "Magneto", was released on May 9, 2005. It is powered by Windows CE 5.0 and uses the .NET Compact Framework 1.0 SP2 — an environment for programs based on .NET to be used.
SynCE has support for Windows Mobile 2005, on its support pages.

http://www.synce.org/index.php/Windows_Mobile
http://www.synce.org/index.php/SynCE-Wiki
http://www.synce.org/index.php/Windows_Mobile_2005_Support
http://www.funambol.com/opensource/
Citaat
http://ubuntuforums.org/showthread.php?p=2271744#post2271744
Yes, under Fiesty I can sync my HP Ipaq1930 with Evolution, the contacts and calendar are perfect . The Howto worked first time with out problems.

 could sync an eten m600 and a linux box using a vmware virtual machine to sync files and emails (w/ the virtual machine running windows) .
Citaat
Bluetooth gsm sony-ericsson Z530 d  of Sony K750i is
http://forum.ubuntu-nl.org/topic/8383
https://wiki.ubuntu.com/NlBluetooth?highlight=%28nlbluetooth%29

Ik synchroniseer opie adresboek, calendar en todo met evolution. Dat werkt super.
Dat schijnt overigens ook te kunnen tussen evo en pocketpc.
Hier is een heel goed programma voor: multisync.
http://multisync.sourceforge.net/index.shtml
http://forum.nedlinux.nl/viewtopic.php?id=11836
Citaat
Volgens mij zou je al veel hulp kunnen bieden door uit te zoeken wat nu standaard wel zou moeten werken en wat niet.
Op internet slagen verscheidene mensen er nl wel in om hun Pocketpc aan de praat te krijgen.
Florian, Je spreekt hopelijk wel een beetje engels ?

Welke versies van Windows PocketPC worden nu wel ondersteunt..en welke niet ?
Welke fabrikanten met Windows PocketPC worden nu wel ondersteunt..en welke niet ?
Welke desktops/window mangers van Windows PocketPC worden nu wel ondersteunt..en welke niet ? Ik krijg de indruk dat er met KDE minder problemen zijn.
Welke mobile phones en PDA's van Windows PocketPC worden nu wel ondersteunt..en welke niet ?
Citaat
http://multisync.sourceforge.net/news.php
MultiSync is a free modular program to synchronize calendars, addressbooks and other PIM data between programs on your computer and other computers, mobile devices, PDAs or cell phones. MultiSync works on any Gnome platform, such as Linux.

Currently MultiSync has plugins for
Ximian Evolution synchronization, supporting calendar, ToDos and contacts. Multisync also support Evolution 2
IrMC Mobile Client synchronization (supported by e.g. SonyEricsson T68i/T610/Z600, Siemens S55 phones etc.) via Bluetooth or IR on Linux, or cable connection.
Windows CE / Pocket PC synchronization. This plugin is part of the SynCE project, and can be downloaded there.
Opie and Zaurus synchronization.

SyncML support (supported by e.g. SonyEricsson P800/P900 and many other phones and devices, for example the SyncML server Sync4j). SyncML also allows you to do remote connection of two MultiSync programs via an encrypted connection over the net.
Palm synchronization.
LDAP synchronization.
Backup of your PIM data.
http://multisync.sourceforge.net/news.php
Citaat
http://synce.sourceforge.net/synce/index2.php
Attention Windows Mobile 2005 device owners!

These devices do not work with SynCE. If you are interested in getting these
devices supported by SynCE, please join the SynCE-WindowsMobile5 mailing list. Se also bug report 1332550.
http://synce.sourceforge.net/synce/index2.php
Citaat
It's a Windows Mobile 5 device. See www.synce.org. Maart 2007
http://www.synce.org/index.php/SynCE-Wiki
Citaat
It's a Windows Mobile 5 device. See www.synce.org. Maart 2007
http://www.synce.org/index.php/SynCE-Wiki


 

First you must find out what version of Windows your device is running, and visit the corresponding section below:
For help on finding out what version of Windows your device is running, visit the Discovering your Device's Windows Version page.
Windows Mobile 2005
Windows Mobile 2005 support in SynCE is under development.
For support and Installation Guides, visit the Windows Mobile 2005 Support page

http://www.synce.org/index.php/Installation_Guides
Citaat
STAP 1
building SynCE with WM5 support from SVN

Install libsync, librapi2, odccm, synce-gnome
http://www.synce.org/index.php/Building_SynCE_with_Windows_Mobile_2005_support_from_Subversion

STAP 2
subversion of usb-rndis-lite and compiled

http://www.synce.org/index.php/Connecting_your_Windows_Mobile_2005_device_via_USB_(usb-rndis-lite)

STAP 3
Starting A Connection

"sudo odccm" and then "cd synce-gnome/src" and then "python test.py"
http://www.synce.org/index.php/Starting_A_Connection
Citaat
http://synce.sourceforge.net/synce/qa.php


            Unable to initialize RAPI / Failed to get connection info

Q: I setup everything and connected my PDA but when I try the tools I get a message similar to this in SynCE 0.8 or later:


    pstatus: Unable to initialize RAPI: An unspecified failure has occurred


Or this message in earlier versions of SynCE:
           ReadConfigFile: stat: No such file or directory
               pstatus: Unable to initialize RAPI: Failure


If I add -d 4 as parameters to pstatus, I get this a message like this too:
     [synce_info_new:31] unable to open file: /home/david/.synce/active_connection
         [rapi_context_connect:88] Failed to get connection info


A: This means that the PDA has not connected to dccm or that you run the tools and dccm as different users. Please make sure that:
    1. you are not using an external USB hub
    2. you have installed the patch for the "we're stuffed" bug
    3. you supplied a password to dccm if your device is password-protected
    4. dccm was started before you ran synce-serial-start
    5. that the PPP connection is successful (look in your system logs)
    6. no firewall configuration prevents the PDA from connecting to dccm
    7. you run dccm and the tools as the same user


See connect for more information.
http://synce.sourceforge.net/synce/qa.php

andreh

  • Gast
Waar zit mijn PocketPC nu ? Is PDA niet gemount ?
« Reactie #13 Gepost op: 2007/03/25, 22:57:36 »
Voor het installeren van 'usb-rndis-lite' moet voldaan worden aan twee eisen:
1) Kernel Headers installed:
2)   CONFIG_USB_NET_CDCETHER compiled either into the kernel

Hoe en waar kan ik zien of dit het geval is ?
Ik gebruik de onderstaande handleiding

http://www.synce.org/index.php/Connecting_your_Windows_Mobile_2005_device_via_USB_(usb-rndis-lite)

Citaat
Dit is EIS 1

Compile and Install
Note: you must have your Kernel Headers installed:
Waar kan ik onderstaande vinden:

Citaat
Dit is EIS 2

Note: You need to have CONFIG_USB_NET_CDCETHER compiled either into the kernel, or as a module, in your kernel config.
En waar zit ' USB Gadget support -> Ethernet Gadge'  in Ubuntu 06.10 ?
Located in Device Drivers -> USB support -> USB Gadget support -> Ethernet Gadget

Citaat
USER @ubuntu:/lib$ uname -a
Linux ubuntu 2.6.17-11-386 #2 Thu Feb 1 19:50:13 UTC 2007 i686 GNU/Linux




http://www.synce.org/index.php/Kernel_Headers
Install the package kernel-headers-VERSION, where VERSION is your output to uname -r. In the previous example, I would have to install the package kernel-headers-2.4.27-2-686. This can be done using a graphical repository browser, or simply on the command line execute, as root:

USER@ubuntu:/lib$ sudo apt-get install kernel-headers-2.6.17-11-386
Reading package lists... Done
Building dependency tree      
Reading state information... Done
E: Couldn't find package kernel-headers-2.6.17-11-386

http://www.synce.org/index.php/Kernel_Headers
http://www.synce.org/index.php/Connecting_your_Windows_Mobile_2005_device_via_USB_(usb-rndis-lite)


Citaat
USER@ubuntu:~/Desktop/PocketPC$ svn co https://svn.sourceforge.net/svnroot/synce/trunk/usb-rndis-lite
svn: Can't open file 'usb-rndis-lite/.svn/lock'
USER@ubuntu:~/Desktop/PocketPC$ sudo svn co https://svn.sourceforge.net/svnroot/synce/trunk/usb-rndis-lite
Checked out revision 2774.
USER@ubuntu:~/Desktop/PocketPC$ cd usb-rndis-lite
USER@ubuntu:~/Desktop/PocketPC/usb-rndis-lite$ sudo make
make -C /lib/modules/2.6.17-11-386/build SUBDIRS=/home/USER/Desktop/PocketPC/usb-rndis-lite modules
make: *** /lib/modules/2.6.17-11-386/build: No such file or directory.  Stop.
make: *** [default] Error 2
USER@ubuntu:~/Desktop/PocketPC/usb-rndis-lite$ uname -a
Linux ubuntu 2.6.17-11-386 #2 Thu Feb 1 19:50:13 UTC 2007 i686 GNU/Linux
USER@ubuntu:~/Desktop/PocketPC/usb-rndis-lite$ ls -rtl
total 120
Citaat
USER@ubuntu:/lib$ ls -rtl mod*
total 16
drwxr-xr-x 7 root root 4096 2006-10-06 07:28 2.6.15-23-386
drwxr-xr-x 7 root root 4096 2007-03-07 13:43 2.6.15-28-386
drwxr-xr-x 6 root root 4096 2007-03-13 16:21 2.6.17-11-386
drwxr-xr-x 2 root root 4096 2007-03-16 12:27 2.6.17-11-generic
USER@ubuntu:/lib$
Citaat
USER@ubuntu:/lib$ ls -rtl  /lib/modules/2.6.17-11-386
total 1516
drwxr-xr-x 11 root root   4096 2007-03-11 19:34 kernel
drwxr-xr-x  2 root root   4096 2007-03-11 19:34 initrd
drwxr-xr-x  2 root root   4096 2007-03-11 19:34 madwifi
-rw-r--r--  1 root root 265637 2007-03-13 16:21 modules.pcimap
-rw-r--r--  1 root root 339217 2007-03-13 16:21 modules.dep
-rw-r--r--  1 root root 387348 2007-03-13 16:21 modules.usbmap
-rw-r--r--  1 root root   1135 2007-03-13 16:21 modules.seriomap
-rw-r--r--  1 root root     74 2007-03-13 16:21 modules.ofmap
-rw-r--r--  1 root root  22378 2007-03-13 16:21 modules.isapnpmap
-rw-r--r--  1 root root    806 2007-03-13 16:21 modules.inputmap
-rw-r--r--  1 root root    813 2007-03-13 16:21 modules.ieee1394map
-rw-r--r--  1 root root     69 2007-03-13 16:21 modules.ccwmap
-rw-r--r--  1 root root 144271 2007-03-13 16:21 modules.symbols
-rw-r--r--  1 root root 329850 2007-03-13 16:21 modules.alias
drwxr-xr-x  2 root root    380 2007-03-25 11:42 volatile
USER@ubuntu:/lib$
http://www.synce.org/index.php/Connecting_your_Windows_Mobile_2005_device_via_USB_(usb-rndis-lite)

andreh

  • Gast
Waar zit mijn PocketPC nu ? Is PDA niet gemount ?
« Reactie #14 Gepost op: 2007/03/26, 14:20:38 »
Onderstaande zijn al geinstalleerd volgens de grafische Synaptic Manager.., dus dat is het probleem blijkbaar niet..
Citaat
Linux kernel headers for version 2.6.17 on x86/x86_64
This package provides kernel header files for version 2.6.17 on
x86/x86_64.
Citaat
Header files related to Linux kernel version 2.6.17
This package provides kernel header files for version 2.6.17, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-headers-2.6.17-11/debian.README.gz for details
Citaat
USER@ubuntu:~/Desktop/PocketPC/usb-rndis-lite$ sudo ./clean.sh
Password:
make -C /lib/modules/2.6.17-11-386/build SUBDIRS=/home/USER/Desktop/PocketPC/usb-rndis-lite modules
make: *** /lib/modules/2.6.17-11-386/build: No such file or directory.  Stop.
make: *** [default] Error 2
ERROR: Module rndis_host does not exist in /proc/modules
ERROR: Module cdc_ether does not exist in /proc/modules
ERROR: Module usbnet does not exist in /proc/modules
USERs@ubuntu:~/Desktop/PocketPC/usb-rndis-lite$
Citaat
ls -rtl /lib/modules/2.6.17-11-generic/
total 0
lrwxrwxrwx 1 root root 40 2007-03-16 12:27 build -> /usr/src/linux-headers-2.6.17-11-generic
Citaat

 ls -rtl /usr/src/linux-headers-2.6.17-11-generic/    

total 340
-rw-r--r-- 1 root root 285721 2007-02-01 20:03 Module.symvers
-rw-r--r-- 1 root root  45479 2007-02-01 21:12 Makefile
drwxr-xr-x 8 root root   4096 2007-03-16 12:27 scripts
lrwxrwxrwx 1 root root     30 2007-03-16 12:27 usr -> ../linux-headers-2.6.17-11/usr
lrwxrwxrwx 1 root root     32 2007-03-16 12:27 sound -> ../linux-headers-2.6.17-11/sound
lrwxrwxrwx 1 root root     35 2007-03-16 12:27 security -> ../linux-headers-2.6.17-11/security
lrwxrwxrwx 1 root root     30 2007-03-16 12:27 net -> ../linux-headers-2.6.17-11/net
lrwxrwxrwx 1 root root     34 2007-03-16 12:27 modules -> ../linux-headers-2.6.17-11/modules
lrwxrwxrwx 1 root root     29 2007-03-16 12:27 mm -> ../linux-headers-2.6.17-11/mm
lrwxrwxrwx 1 root root     30 2007-03-16 12:27 lib -> ../linux-headers-2.6.17-11/lib
lrwxrwxrwx 1 root root     33 2007-03-16 12:27 kernel -> ../linux-headers-2.6.17-11/kernel
lrwxrwxrwx 1 root root     30 2007-03-16 12:27 ipc -> ../linux-headers-2.6.17-11/ipc
lrwxrwxrwx 1 root root     31 2007-03-16 12:27 init -> ../linux-headers-2.6.17-11/init
drwxr-xr-x 4 root root   4096 2007-03-16 12:27 include
lrwxrwxrwx 1 root root     29 2007-03-16 12:27 fs -> ../linux-headers-2.6.17-11/fs
lrwxrwxrwx 1 root root     35 2007-03-16 12:27 firmware -> ../linux-headers-2.6.17-11/firmware
lrwxrwxrwx 1 root root     34 2007-03-16 12:27 drivers -> ../linux-headers-2.6.17-11/drivers
lrwxrwxrwx 1 root root     33 2007-03-16 12:27 crypto -> ../linux-headers-2.6.17-11/crypto
lrwxrwxrwx 1 root root     32 2007-03-16 12:27 block -> ../linux-headers-2.6.17-11/block
lrwxrwxrwx 1 root root     31 2007-03-16 12:27 arch -> ../linux-headers-2.6.17-11/arch
direcory BUILD gekopieerd:

sudo cp -R * ../2.6.17-11-386/


Citaat
sudo make
make -C /lib/modules/2.6.17-11-386/build SUBDIRS=/home/USER/Desktop/PocketPC/usb-rndis-lite modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.17-11-generic'
  CC [M]  /home/USER/Desktop/PocketPC/usb-rndis-lite/usbnet.o
/home/USER/Desktop/PocketPC/usb-rndis-lite/usbnet.c: In function ‘init_status’:
/home/USER/Desktop/PocketPC/usb-rndis-lite/usbnet.c:191: warning: passing argument 6 of ‘usb_fill_int_urb’ from incompatible pointer type
/home/USER/Desktop/PocketPC/usb-rndis-lite/usbnet.c: In function ‘rx_submit’:
/home/USER/Desktop/PocketPC/usb-rndis-lite/usbnet.c:324: warning: passing argument 6 of ‘usb_fill_bulk_urb’ from incompatible pointer type
/home/USER/Desktop/PocketPC/usb-rndis-lite/usbnet.c: In function ‘usbnet_start_xmit’:
/home/USER/Desktop/PocketPC/usb-rndis-lite/usbnet.c:957: warning: passing argument 6 of ‘usb_fill_bulk_urb’ from incompatible pointer type
  CC [M]  /home/USER/Desktop/PocketPC/usb-rndis-lite/cdc_ether.o
  CC [M]  /home/USER/Desktop/PocketPC/usb-rndis-lite/rndis_host.o
  Building modules, stage 2.
  MODPOST
  CC      /home/USER/Desktop/PocketPC/usb-rndis-lite/cdc_ether.mod.o
  LD [M]  /home/USER/Desktop/PocketPC/usb-rndis-lite/cdc_ether.ko
  CC      /home/USER/Desktop/PocketPC/usb-rndis-lite/rndis_host.mod.o
  LD [M]  /home/USER/Desktop/PocketPC/usb-rndis-lite/rndis_host.ko
  CC      /home/USER/Desktop/PocketPC/usb-rndis-lite/usbnet.mod.o
  LD [M]  /home/USER/Desktop/PocketPC/usb-rndis-lite/usbnet.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.17-11-generic'
Citaat
sudo ./clean.sh
make -C /lib/modules/2.6.17-11-386/build SUBDIRS=/home/USER/Desktop/PocketPC/usb-rndis-lite modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.17-11-generic'
  Building modules, stage 2.
  MODPOST
make[1]: Leaving directory `/usr/src/linux-headers-2.6.17-11-generic'
ERROR: Module rndis_host does not exist in /proc/modules
ERROR: Module cdc_ether does not exist in /proc/modules
ERROR: Module usbnet does not exist in /proc/modules
http://www.synce.org/index.php/Starting_A_Connection

Citaat
sudo make install
make -C /lib/modules/2.6.17-11-386/build SUBDIRS=/home/USER/Desktop/PocketPC/usb-rndis-lite modules_install
make[1]: Entering directory `/usr/src/linux-headers-2.6.17-11-generic'
  INSTALL /home/USER/Desktop/PocketPC/usb-rndis-lite/cdc_ether.ko
  INSTALL /home/USER/Desktop/PocketPC/usb-rndis-lite/rndis_host.ko
  INSTALL /home/USER/Desktop/PocketPC/usb-rndis-lite/usbnet.ko
  DEPMOD  2.6.17-11-generic
make[1]: Leaving directory `/usr/src/linux-headers-2.6.17-11-generic'
depmod -ae
Citaat
Controleer of de daemons al runnen
 udev -> hald -> dbus-daemon

ps aux | grep -E "hald|dbus-daemon|udevd"

root      2165  0.0  0.1   2644   332 ?        S104       4076  0.0  0.3   2304   824 ?        Ss   09:46   0:00 /usr/bin/dbus-daemon --system
108       4091  0.0  0.7   7140  1856 ?        Ss   09:46   0:05 /usr/sbin/hald
root      4092  0.0  0.3   2912   880 ?        S    09:46   0:00 hald-runner
108       4098  0.0  0.2   2024   672 ?        S    09:46   0:00 /usr/lib/hal/hald-addon-acpi
108       4101  0.0  0.2   2020   700 ?        S    09:46   0:00 /usr/lib/hal/hald-addon-keyboard
108       4114  0.0  0.2   2028   712 ?        S    09:46   0:00 /usr/lib/hal/hald-addon-storage
108       4116  0.0  0.2   2028   708 ?        S    09:46   0:00 /usr/lib/hal/hald-addon-storage
108       4119  0.0  0.2   2024   712 ?        D    09:46   0:00 /usr/lib/hal/hald-addon-storage
108       4121  0.0  0.2   2028   708 ?        S    09:46   0:00 /usr/lib/hal/hald-addon-storage
108       4125  0.0  0.2   2024   708 ?        S    09:46   0:00 /usr/lib/hal/hald-addon-storage
108       4133  0.0  0.2   2024   708 ?        S    09:46   0:04 /usr/lib/hal/hald-addon-storage
USER  4888  0.0  0.3   2304   820 ?        Ss   09:47   0:00 /usr/bin/dbus-daemon --fork --print-pid 8 --print-address 6 --session
Citaat
sudo apt-get install  python-dbus
Reading package lists... Done
Building dependency tree      
Reading state information... Done
python-dbus is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 28 not upgraded.
Citaat
pls

** (process:12320): WARNING **: No devices connected to odccm
pls: Could not find configuration at path '(Default)'
http://www.synce.org/index.php/Starting_A_Connection

Citaat
cat /proc/bus/usb/devices

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=ef(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs=  1
P:  Vendor=0bb4 ProdID=0bce Rev= 0.00
S:  Manufacturer=HTC
S:  Product=Generic RNDIS

C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ef(unk. ) Sub=01 Prot=01 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
Op Tweakers zijn ook mensen bezig met de PocketPC

http://gathering.tweakers.net/forum/find/keyword?data%5Bq%5D=pocketpc&data%5Bboolean%5D=AND&data%5Bposter%5D=&data%5Bforums%5D%5B%5D=23&data%5Btopicstarter%5D=&data%5Border%5D=message&data%5Bage_start%5D=&data%5Bage_end%5D=&data%5Btopicstatus%5D=&data%5Bxq%5D=pocketpc.&data%5BxDB%5D=default&data%5BxFILTERS%5D=XF23---A&data%5Bsearchtimeout%5D=30&select_forum=