Nieuws:

We zijn er weer.

Na lange tijd van afwezigheid zijn we er weer  :laugh:
We hebben alle wachtwoorden gereset, je oude wachtwoord werkt niet meer.Je moet via het "wachtwoord vergeten"-linkje je wachtwoord resetten. Je krijgt hiervoor een mailtje op het adres dat je bij ons geregistreerd hebt.

De komende tijd zijn we nog druk bezig om de rest van de site op te bouwen, dus het kan zijn dat sommige onderdelen (tijdelijk) niet werken.

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Nieuwe Mixxx software voor o.a. dj's !!  (gelezen 3696 keer)

Offline Joris Donders

  • Lid
  • Steunpunt: Nee
Nieuwe Mixxx software voor o.a. dj's !!
« Gepost op: 2011/11/07, 21:15:02 »
Hij is uit de nieuwe Mixxx (mixing software) 1.10 bèta. Ik vind hem al heus stabiel, en het werkt zeer goed.

Het is middels toevoeging van een PPA van de makers van die software. (Sidder ;) )

http://www.webupd8.org/2011/11/mixxx-mixing-software-110-beta-released.html

Draait vlot en goed in Oneric Ocelot.
Gubuntu 17.04 wegens verdwijnen Unity binnenkort

Offline Timo

  • Forumteam
    • timo.diedering
  • Steunpunt: Ja
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #1 Gepost op: 2011/11/08, 16:35:36 »
Even proberen, ziet er leuk uit

aaaahhhhhhhhhhh!!!!!!! PPA!!!! De wereld vergaat!!!!!
Trotse eigenaar van een Nokia N900, een Nokia N9 en een Jolla.

Offline Timo

  • Forumteam
    • timo.diedering
  • Steunpunt: Ja
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #2 Gepost op: 2011/11/09, 07:57:28 »
Hm, bij mij start de béta al niet eens op...
Trotse eigenaar van een Nokia N900, een Nokia N9 en een Jolla.

Offline RikRik

  • Lid
  • Steunpunt: Nee
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #3 Gepost op: 2011/11/09, 11:18:30 »
Hm, bij mij start de béta al niet eens op...

Bèta programma's kan voor meerdere problemen zorgen  ;)

Offline Joris Donders

  • Lid
  • Steunpunt: Nee
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #4 Gepost op: 2011/11/09, 12:47:50 »
Hier totaal geen probleem hoor ; werkt zelfs perfect !

Ik heb al een compleet dance-mixje kunnen maken en het is gewoon super. Ik heb zelfs het draaitafelgevoel van de pick-ups .

Nadeel het is niet simpel om hem als café-mixing te gebruiken (de afspeellijsten zijn nog wat onstabiel) / ;)


Er is ook een stable-versie van deze Mixxx; je hoeft niet per se de bèta te nemen hoor (zie site).
Gubuntu 17.04 wegens verdwijnen Unity binnenkort

Offline Timo

  • Forumteam
    • timo.diedering
  • Steunpunt: Ja
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #5 Gepost op: 2011/11/09, 16:26:15 »
Ik kan de beta ppa na deïnstallatie toch gewoon vervangen door de stable?

Joris: Kijk eens naar ultramixer.
Trotse eigenaar van een Nokia N900, een Nokia N9 en een Jolla.

Offline Joris Donders

  • Lid
  • Steunpunt: Nee
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #6 Gepost op: 2011/11/09, 21:44:31 »
ultramixer en Ubuntu lopen niet zo goed samen (vind ik ... een beetje onkunde van mijn kant speelt wel mee) .

Toch heb ik met Mixxx eigenlijk alles wat ik nodig heb voor mezelf.

Nog voor een project heb ik een goede 'café-mixer' nodig (als iemand suggesties heeft ...) .

@tiempjuuh jajaja je kan gewoon de stable installeren (zonder die ppa's) , no doubt .
Je mist wel een paar leuke features van de bèta, maar voor gewoon fun is dat eigenlijk niet nodig ;) .


« Laatst bewerkt op: 2011/11/09, 21:46:37 door Joris Donders »
Gubuntu 17.04 wegens verdwijnen Unity binnenkort

Offline Timo

  • Forumteam
    • timo.diedering
  • Steunpunt: Ja
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #7 Gepost op: 2011/11/10, 07:09:42 »
Hij doet het ook niet. Zal wel aan mij liggen
Trotse eigenaar van een Nokia N900, een Nokia N9 en een Jolla.

Offline Vistaus

  • Webteam
    • vistaus
  • Steunpunt: Nee
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #8 Gepost op: 2011/11/10, 12:17:50 »
Hij doet het ook niet. Zal wel aan mij liggen

Kun je eens een Terminalvenster openen en van daaruit Mixxxx starten en de output hier posten? Dan gaan wij even meekijken waarom ie niet start :)

Offline Timo

  • Forumteam
    • timo.diedering
  • Steunpunt: Ja
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #9 Gepost op: 2011/11/10, 16:50:29 »
Ik zit nu bij mijn oma met jawel... ;)

En hij start wel, althans, het proces wordt actief, en ik zie de contouren van de schuiven, maar meer ook niet. Als ik thuis ben zal ik hem in de terminal starten :)
Trotse eigenaar van een Nokia N900, een Nokia N9 en een Jolla.

Offline Timo

  • Forumteam
    • timo.diedering
  • Steunpunt: Ja
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #10 Gepost op: 2011/11/10, 18:40:12 »
timo@timo-A8M:~$ mixxx

(mixxx:2234): Gtk-WARNING **: Kan themamodule niet vinden in modulepad: ‘equinox’,

(mixxx:2234): Gtk-WARNING **: Kan themamodule niet vinden in modulepad: ‘equinox’,
Debug: [Main]: Mixxx  "" is starting...
Debug: [Main]: Qt version is: 4.7.4
Debug: [Main]: Configuration file is at the current version 1.9.2
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Channel1]" , "volume" )
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Channel2]" , "volume" )
Debug: [Main]: JACK client name set
ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear
ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe
ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side
ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Invoer-/uitvoerfout(5)
ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Invoer-/uitvoerfout(5)
ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Invoer-/uitvoerfout(5)
ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Invoer-/uitvoerfout(5)
ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
Cannot connect to server socket err = Bestand of map bestaat niet
Cannot connect to server socket
jack server is not running or cannot be started
Debug: [Main]: ("QSQLITE", "QMYSQL3", "QMYSQL")
Debug: [Main]: src/library/trackcollection.cpp DB status: true
Debug: [Main]: QSqlError(-1, "", "")
Debug: [Main]: SchemaManager::upgradeToSchemaVersion already past target version. currentVersion: 13 targetVersion: 8
Debug: [Main]: Current schema version is backwards-compatible with 8
Debug: [Main]: TrackDAO::initialize QThread(0x9593918, name = "Main") "qt_sql_default_connection"
Debug: [Main]: CrateDAO::initialize()
Debug: [Main]: CueDAO::initialize QThread(0x9593918, name = "Main") "qt_sql_default_connection"
Debug: [Main]: Columns: 20 Rows: 0
Debug: [Main]: BaseTrackCache(0x95f0568) updateIndexWithQuery took 5 ms
Debug: [Main]: LibraryTableModel(0x97b6ef0) select() took 2 ms
Debug: [Main]: Created MissingTracksModel!
Debug: [Main]: MissingTableModel(0x962bb38) select() took 2 ms
Debug: [Main]: MissingTableModel(0x962bb38) select() took 2 ms
Debug: [Main]: Promo dir: "/usr/share/mixxx//promo/1.8.0/index.html"
Debug: [Main]: ControlObject::getControl returning NULL for ( "[ReplayGain]" , "InitialReplayGainBoost" )
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Mixer Profile]" , "LoEQFrequency" )
Debug: [Main]: Setting  "[Channel1]" "filterLowKill" as toggle
Debug: [Main]: Setting  "[Channel1]" "filterMidKill" as toggle
Debug: [Main]: Setting  "[Channel1]" "filterHighKill" as toggle
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Flanger]" , "lfoDepth" )
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Flanger]" , "lfoDelay" )
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Flanger]" , "lfoPeriod" )
Debug: [Main]: Setting  "[Channel1]" "flanger" as toggle
Debug: [Main]: Setting  "[Channel1]" "play" as toggle
Debug: [Main]: Setting  "[Channel1]" "repeat" as toggle
Debug: [Main]: CachingReader using 4980736 bytes.
Debug: [Main]: Setting  "[Channel1]" "keylock" as toggle
Debug: [Main]: Setting  "[Channel1]" "pfl" as toggle
Debug: [Main]: Setting  "[Channel2]" "filterLowKill" as toggle
Debug: [Main]: Setting  "[Channel2]" "filterMidKill" as toggle
Debug: [Main]: Setting  "[Channel2]" "filterHighKill" as toggle
Debug: [Main]: Setting  "[Channel2]" "flanger" as toggle
Debug: [Main]: Setting  "[Channel2]" "play" as toggle
Debug: [Main]: Setting  "[Channel2]" "repeat" as toggle
Debug: [Main]: CachingReader using 4980736 bytes.
Debug: [Main]: Setting  "[Channel2]" "keylock" as toggle
Debug: [Main]: Setting  "[Channel2]" "pfl" as toggle
Debug: [Main]: Constructed LibraryScanner
Debug: [Main]: iTunes Album Art path is: ""
Debug: [Main]: Could not read "/home/timo/.mixxx/midi/MixxxMIDIDevices"
Debug: [Main]: MidiDeviceManager::getDeviceList
Debug: [Main]: Scanning PortMIDI devices:
Debug: [Main]:  Found output device # 0 Midi Through Port-0
Debug: [Main]:  Found input device # 1 Midi Through Port-0
Debug: [Main]:     Linking to output device # 0 "Midi Through Port-0"
Debug: [Main]: Starting script engine with output device ""
Debug: [MidiScriptEngine 1]: MIDI Device in script engine is: ""
Debug: [Main]: MidiDeviceManager: Setting up devices
Debug: [Main]: PortMIDI device "1. Midi Through Port-0" already closed
Debug: [Main]: MidiMapping: Loading MIDI preset from "/home/timo/.mixxx/midi/Midi_Through_Port-0.midi.xml"
Debug: [Main]: Could not open xml file: "/home/timo/.mixxx/midi/Midi_Through_Port-0.midi.xml"
Debug: [Main]: Connected to accessibility bus at:  "unix:abstract=/tmp/dbus-7MprJO2Dul,guid=47b551822c368cc9c7bf22180000003a"
Debug: [Main]: Registered DEC:  true
Debug: [Main]: Promo dir: "/usr/share/mixxx//promo/1.8.0/index.html"
Debug: [Main]: loadSettings: 1 0 ""
Debug: [Main]: slotApply crossfader: 1 ""
Debug: [Main]: BPM Scheme File ConfigKey not set or file missing... setting to "/home/timo/.mixxx/mixxxbpmscheme.xml"
Debug: [Main]: BpmSchemes::readXML "/home/timo/.mixxx/mixxxbpmscheme.xml"
Debug: [Main]: BPM Scheme: "/home/timo/.mixxx/mixxxbpmscheme.xml" does not exist.
Debug: [Main]: MidiDeviceManager::getDeviceList
Debug: [Main]: MidiDeviceManager::getDeviceList
Debug: [Main]: SoundManager::setupDevices()
Debug: [Main]: VinylControlProxy: Unknown vinyl type  ""
Debug: [Main]: Defaulting to Serato...
Debug: [Main]: Building timecode lookup tables...
Allocating 2097152 slots (8192Kb) for 20 bit timecode (Serato 2nd Ed., side A)
Debug: [Main]: Starting vinyl control xwax thread
Debug: [Main]: Building timecode lookup tables...
Allocating 2097152 slots (8192Kb) for 20 bit timecode (Serato 2nd Ed., side A)
Debug: [Main]: Starting vinyl control xwax thread
Debug: [Main]: SoundDevicePortAudio::open() "0, HDA NVidia: AD198x Analog (hw:0,0)"
Debug: [Main]: Requested sample rate: 48000
Debug: [Main]: framesPerBuffer: 1024
Debug: [Main]: Mixxx latency in milliseconds: 21.3333
Debug: [Main]: output channels: 2 | input channels: 0
Debug: [Main]: Opening stream with id 0
Debug: [Main]: Opened PortAudio stream successfully... starting
Debug: [Main]: Dynamically loaded PortAudio library!
Debug: [Main]: PortAudio: Started stream successfully
Debug: [Main]: Actual sample rate:  48000 Hz, latency: 42.6667 ms
Debug: [Main]: Using "HDA NVidia: AD198x Analog (hw:0,0)" as output sound device clock reference
Debug: [Main]: 1 output sound devices opened
Debug: [Main]: 0 input sound devices opened
Debug: [Main]: Legacy can parse: true
Debug: [Main]: PlaylistTableModel(0x9d02848) select() took 1 ms
Debug: [Main]: PlaylistTableModel(0x9d02848) select() took 1 ms
Debug: [Main]: PlaylistTableModel(0x9d02848) select() took 1 ms
Debug: [Main]: LibraryTableModel(0x9dbc360) select() took 3 ms
Debug: [Main]: PrepareLibraryTableModel(0x9dbc360) select() took 2 ms
Debug: [Main]: PrepareLibraryTableModel(0x9dbc360) select() took 2 ms
Debug: [Main]: PrepareLibraryTableModel(0x9dbc360) select() took 2 ms
Debug: [Main]: PrepareLibraryTableModel(0x9dbc360) select() took 2 ms
Debug: [Main]: DlgPrepare(0x9d29000, name = "DlgPrepare") analysisActive false
Debug: [Main]: MixxxLibraryFeature::activate()
Debug: [Main]: LibraryTableModel(0x97b6ef0) select() took 10 ms
Debug: [Main]: WSearchLineEdit::restoreSearch( "" )
Warning: [Main]: QGLContext::makeCurrent(): Cannot make invalid context current.
Debug: [Main]: createWaveformViewer()
Debug: [Main]: WaveformViewerFactory :: Creating new visual waveform
Debug: [Main]: WaveformViewerFactory :: Making new GL context.
Debug: [Main]: createWaveformViewer()
Debug: [Main]: WaveformViewerFactory :: Creating new visual waveform
Debug: [Main]: WaveformViewerFactory :: Sharing existing GL context.
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Channel1]" , "hotcue_38_position" )
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Channel2]" , "hotcue_38_position" )
Warning: [Main]: WPushButton for control  "[Channel1],hotcue_1_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel1],hotcue_2_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel1],hotcue_3_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel1],hotcue_4_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel2],hotcue_1_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel2],hotcue_2_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel2],hotcue_3_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel2],hotcue_4_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel1],loop_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel2],loop_enabled" is null, skipping.
Debug: [Main]: Displaying mixxx
Debug: [Main]: Running Mixxx
Warning: [Main]: Invalid parent:  0x9d16e58 QApplication(0x9597d08, name = "mixxx")
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: QAccessibleWidget::rect: This implementation does not support subelements! (ID 1 unknown for QTextEdit)
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: QAccessibleWidget::rect: This implementation does not support subelements! (ID 2 unknown for QTextEdit)
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: QAccessibleWidget::rect: This implementation does not support subelements! (ID 3 unknown for QTextEdit)
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Requesting child objects for an interface that is a virtual child itself.
Warning: [Main]: Invalid parent:  0xa4877f0 QToolBox(0x9abdd68, name = "toolBox")
Warning: [Main]: QSpiAdaptor::getChild INVALID CHILD:  QToolBox(0x9abdd68, name = "toolBox") 1
Warning: [Main]: QSpiAdaptor::getChild INVALID CHILD:  QToolBox(0x9abdd68, name = "toolBox") 2
Fatal: [Main]: ASSERT: "interface->childCount() == children.count()" in file adaptor.cpp, line 200
Behoorlijke lap, ik denk dat de laatste regels van belang zijn. Ik heb een paar regels (die van warning en child) omdat het bericht te lang was XD
Trotse eigenaar van een Nokia N900, een Nokia N9 en een Jolla.

Offline Vistaus

  • Webteam
    • vistaus
  • Steunpunt: Nee
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #11 Gepost op: 2011/11/10, 23:34:24 »
XD
Het lijkt alsof er iets van Qt ontbreekt, maar ik kan zo gauw niet zeggen wat. Kun je hem anders eens starten via gdb mixxx
en dan
run

en dan doen wat je doet en dan de output posten?
Meestal haal ik uit gdb wel iets meer informatie.

Offline Timo

  • Forumteam
    • timo.diedering
  • Steunpunt: Ja
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #12 Gepost op: 2011/11/11, 07:07:58 »
timo@timo-A8M:~$ gdb mixxx
GNU gdb (Ubuntu/Linaro 7.3-0ubuntu2) 7.3-2011.08
Copyright (C) 2011 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "i686-linux-gnu".
For bug reporting instructions, please see:
<http://bugs.launchpad.net/gdb-linaro/>...
Reading symbols from /usr/bin/mixxx...(no debugging symbols found)...done.
(gdb) run
Starting program: /usr/bin/mixxx
[Thread debugging using libthread_db enabled]

(mixxx:3007): Gtk-WARNING **: Kan themamodule niet vinden in modulepad: ‘equinox’,

(mixxx:3007): Gtk-WARNING **: Kan themamodule niet vinden in modulepad: ‘equinox’,
[New Thread 0xb7b8eb70 (LWP 3010)]
[New Thread 0xb738db70 (LWP 3011)]
Debug: [Main]: Mixxx  "" is starting...
Debug: [Main]: Qt version is: 4.7.4
Debug: [Main]: Configuration file is at the current version 1.9.2
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Channel1]" , "volume" )
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Channel2]" , "volume" )
[New Thread 0xb6926b70 (LWP 3012)]
Debug: [Main]: JACK client name set
ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear
ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe
ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side
ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Invoer-/uitvoerfout(5)
ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Invoer-/uitvoerfout(5)
ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Invoer-/uitvoerfout(5)
ALSA lib audio/pcm_bluetooth.c:1613:(audioservice_expect) BT_GET_CAPABILITIES failed : Invoer-/uitvoerfout(5)
[New Thread 0xb2116b70 (LWP 3013)]
[Thread 0xb2116b70 (LWP 3013) exited]
[New Thread 0xb2116b70 (LWP 3014)]
ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream
[Thread 0xb2116b70 (LWP 3014) exited]
[New Thread 0xb2116b70 (LWP 3015)]
[Thread 0xb2116b70 (LWP 3015) exited]
[New Thread 0xb2116b70 (LWP 3016)]
[Thread 0xb2116b70 (LWP 3016) exited]
[New Thread 0xb6125b70 (LWP 3017)]
Cannot connect to server socket err = Bestand of map bestaat niet
Cannot connect to server socket
jack server is not running or cannot be started
[Thread 0xb6125b70 (LWP 3017) exited]
Debug: [Main]: ("QSQLITE", "QMYSQL3", "QMYSQL")
Debug: [Main]: src/library/trackcollection.cpp DB status: true
Debug: [Main]: QSqlError(-1, "", "")
Debug: [Main]: SchemaManager::upgradeToSchemaVersion already past target version. currentVersion: 13 targetVersion: 8
Debug: [Main]: Current schema version is backwards-compatible with 8
Debug: [Main]: TrackDAO::initialize QThread(0x845ae60, name = "Main") "qt_sql_default_connection"
Debug: [Main]: CrateDAO::initialize()
Debug: [Main]: CueDAO::initialize QThread(0x845ae60, name = "Main") "qt_sql_default_connection"
Debug: [Main]: Columns: 20 Rows: 0
Debug: [Main]: BaseTrackCache(0x86731f8) updateIndexWithQuery took 1 ms
Debug: [Main]: LibraryTableModel(0x8679bb0) select() took 1 ms
Debug: [Main]: Created MissingTracksModel!
Debug: [Main]: MissingTableModel(0x867da28) select() took 10 ms
Debug: [Main]: MissingTableModel(0x867da28) select() took 1 ms
Debug: [Main]: Promo dir: "/usr/share/mixxx//promo/1.8.0/index.html"
[New Thread 0xb2116b70 (LWP 3018)]
[New Thread 0xb60a4b70 (LWP 3019)]
Debug: [Main]: ControlObject::getControl returning NULL for ( "[ReplayGain]" , "InitialReplayGainBoost" )
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Mixer Profile]" , "LoEQFrequency" )
Debug: [Main]: Setting  "[Channel1]" "filterLowKill" as toggle
Debug: [Main]: Setting  "[Channel1]" "filterMidKill" as toggle
Debug: [Main]: Setting  "[Channel1]" "filterHighKill" as toggle
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Flanger]" , "lfoDepth" )
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Flanger]" , "lfoDelay" )
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Flanger]" , "lfoPeriod" )
Debug: [Main]: Setting  "[Channel1]" "flanger" as toggle
Debug: [Main]: Setting  "[Channel1]" "play" as toggle
Debug: [Main]: Setting  "[Channel1]" "repeat" as toggle
Debug: [Main]: CachingReader using 4980736 bytes.
Debug: [Main]: Setting  "[Channel1]" "keylock" as toggle
Debug: [Main]: Setting  "[Channel1]" "pfl" as toggle
Debug: [Main]: Setting  "[Channel2]" "filterLowKill" as toggle
Debug: [Main]: Setting  "[Channel2]" "filterMidKill" as toggle
Debug: [Main]: Setting  "[Channel2]" "filterHighKill" as toggle
Debug: [Main]: Setting  "[Channel2]" "flanger" as toggle
Debug: [Main]: Setting  "[Channel2]" "play" as toggle
Debug: [Main]: Setting  "[Channel2]" "repeat" as toggle
Debug: [Main]: CachingReader using 4980736 bytes.
Debug: [Main]: Setting  "[Channel2]" "keylock" as toggle
Debug: [Main]: Setting  "[Channel2]" "pfl" as toggle
Debug: [Main]: Constructed LibraryScanner
Debug: [Main]: iTunes Album Art path is: ""
Debug: [Main]: Could not read "/home/timo/.mixxx/midi/MixxxMIDIDevices"
Debug: [Main]: MidiDeviceManager::getDeviceList
Debug: [Main]: Scanning PortMIDI devices:
Debug: [Main]:  Found output device # 0 Midi Through Port-0
Debug: [Main]:  Found input device # 1 Midi Through Port-0
Debug: [Main]:     Linking to output device # 0 "Midi Through Port-0"
Debug: [Main]: Starting script engine with output device ""
[New Thread 0xb47c5b70 (LWP 3022)]
[New Thread 0xb3fc4b70 (LWP 3023)]
Debug: [MidiScriptEngine 1]: MIDI Device in script engine is: ""
Debug: [Main]: MidiDeviceManager: Setting up devices
Debug: [Main]: PortMIDI device "1. Midi Through Port-0" already closed
Debug: [Main]: MidiMapping: Loading MIDI preset from "/home/timo/.mixxx/midi/Midi_Through_Port-0.midi.xml"
Debug: [Main]: Could not open xml file: "/home/timo/.mixxx/midi/Midi_Through_Port-0.midi.xml"
Debug: [Main]: Connected to accessibility bus at:  "unix:abstract=/tmp/dbus-4X2SJDc2fI,guid=b0fc06fe42d42890d690ab1300000059"
Debug: [Main]: Registered DEC:  true
Debug: [Main]: Promo dir: "/usr/share/mixxx//promo/1.8.0/index.html"
Debug: [Main]: loadSettings: 1 0 ""
Debug: [Main]: slotApply crossfader: 1 ""
Debug: [Main]: BPM Scheme File ConfigKey not set or file missing... setting to "/home/timo/.mixxx/mixxxbpmscheme.xml"
Debug: [Main]: BpmSchemes::readXML "/home/timo/.mixxx/mixxxbpmscheme.xml"
Debug: [Main]: BPM Scheme: "/home/timo/.mixxx/mixxxbpmscheme.xml" does not exist.
Debug: [Main]: MidiDeviceManager::getDeviceList
Debug: [Main]: MidiDeviceManager::getDeviceList
Debug: [Main]: SoundManager::setupDevices()
Debug: [Main]: VinylControlProxy: Unknown vinyl type  ""
Debug: [Main]: Defaulting to Serato...
Debug: [Main]: Building timecode lookup tables...
Allocating 2097152 slots (8192Kb) for 20 bit timecode (Serato 2nd Ed., side A)
Debug: [Main]: Starting vinyl control xwax thread
[New Thread 0xb1915b70 (LWP 3024)]
Debug: [Main]: Building timecode lookup tables...
Allocating 2097152 slots (8192Kb) for 20 bit timecode (Serato 2nd Ed., side A)
Debug: [Main]: Starting vinyl control xwax thread
[New Thread 0xb0913b70 (LWP 3025)]
Debug: [Main]: SoundDevicePortAudio::open() "0, HDA NVidia: AD198x Analog (hw:0,0)"
Debug: [Main]: Requested sample rate: 48000
Debug: [Main]: framesPerBuffer: 1024
Debug: [Main]: Mixxx latency in milliseconds: 21.3333
Debug: [Main]: output channels: 2 | input channels: 0
Debug: [Main]: Opening stream with id 0
Debug: [Main]: Opened PortAudio stream successfully... starting
Debug: [Main]: Dynamically loaded PortAudio library!
[New Thread 0xb0112b70 (LWP 3026)]
Debug: [Main]: PortAudio: Started stream successfully
Debug: [Main]: Actual sample rate:  48000 Hz, latency: 42.6667 ms
Debug: [Main]: Using "HDA NVidia: AD198x Analog (hw:0,0)" as output sound device clock reference
Debug: [Main]: 1 output sound devices opened
Debug: [Main]: 0 input sound devices opened
Debug: [Main]: Legacy can parse: true
[New Thread 0xaf911b70 (LWP 3029)]
[New Thread 0xaf110b70 (LWP 3030)]
Debug: [Main]: PlaylistTableModel(0x8bbb2f8) select() took 1 ms
Debug: [Main]: PlaylistTableModel(0x8bbb2f8) select() took 8 ms
Debug: [Main]: PlaylistTableModel(0x8bbb2f8) select() took 1 ms
[New Thread 0xa9f55b70 (LWP 3031)]
[New Thread 0xa9754b70 (LWP 3032)]
Debug: [Main]: LibraryTableModel(0x8c73fb0) select() took 1 ms
Debug: [Main]: PrepareLibraryTableModel(0x8c73fb0) select() took 1 ms
Debug: [Main]: PrepareLibraryTableModel(0x8c73fb0) select() took 1 ms
Debug: [Main]: PrepareLibraryTableModel(0x8c73fb0) select() took 1 ms
Debug: [Main]: PrepareLibraryTableModel(0x8c73fb0) select() took 1 ms
Debug: [Main]: DlgPrepare(0x8c1fc70, name = "DlgPrepare") analysisActive false
Debug: [Main]: MixxxLibraryFeature::activate()
Debug: [Main]: LibraryTableModel(0x8679bb0) select() took 0 ms
Debug: [Main]: WSearchLineEdit::restoreSearch( "" )
Warning: [Main]: QGLContext::makeCurrent(): Cannot make invalid context current.
Debug: [Main]: createWaveformViewer()
Debug: [Main]: WaveformViewerFactory :: Creating new visual waveform
Debug: [Main]: WaveformViewerFactory :: Making new GL context.
Debug: [Main]: createWaveformViewer()
Debug: [Main]: WaveformViewerFactory :: Creating new visual waveform
Debug: [Main]: WaveformViewerFactory :: Sharing existing GL context.
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Channel1]" , "hotcue_38_position" )
Debug: [Main]: ControlObject::getControl returning NULL for ( "[Channel2]" , "hotcue_38_position" )
Warning: [Main]: WPushButton for control  "[Channel1],hotcue_1_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel1],hotcue_2_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel1],hotcue_3_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel1],hotcue_4_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel2],hotcue_1_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel2],hotcue_2_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel2],hotcue_3_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel2],hotcue_4_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel1],loop_enabled" is null, skipping.
Warning: [Main]: WPushButton for control  "[Channel2],loop_enabled" is null, skipping.
Debug: [Main]: Displaying mixxx
Debug: [Main]: Running Mixxx
Warning: [Main]: Invalid parent:  0x8c0ae40 QApplication(0x84601e0, name = "mixxx")
Warning: [Main]: Invalid parent:  0x895e070 QToolBox(0x8b66e90, name = "toolbox")
Warning: [Main]: QSpiAdaptor::getChild INVALID CHILD:  QToolBox(0x8b66e90, name = "toolbox") 1
Warning: [Main]: QSpiAdaptor::getChild INVALID CHILD:  QToolBox(0x8b66e90, name = "toolbox") 2
Warning: [Main]: QSpiAdaptor::getChild INVALID CHILD:  QToolBox(0x8b66e90, name = "toolbox") 3
Fatal: [Main]: ASSERT: "interface->childCount() == children.count()" in file adaptor.cpp, line 200
[Thread 0xb7b8eb70 (LWP 3010) exited]

Daarna doe ik veelal killall mixxx omdat anders mijn pc zo traag is...
Trotse eigenaar van een Nokia N900, een Nokia N9 en een Jolla.

Offline Vistaus

  • Webteam
    • vistaus
  • Steunpunt: Nee
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #13 Gepost op: 2011/11/11, 18:01:59 »
Kijk, daar haal ik iets bruikbaarders uit :)

Installeer eens qt4-qtconfig (o.i.d., ik vergeet elke keer die pakketnaam, maar het is iets met qtconfig en dan voor qt 4). Dan openen en zet het thema op een ander thema. Werkt het dan nog niet, probeer dan nog een ander thema.
Nu zou het wel moeten werken :)
Dat theming met Qt vs GTK is een bug (het is ook met GTK op KDE) en hopelijk wordt dat in 12.04 opgelost.

Offline Timo

  • Forumteam
    • timo.diedering
  • Steunpunt: Ja
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #14 Gepost op: 2011/11/11, 18:11:16 »
Pakketnaam had je goed ;D

Wat moet ik precies wijzigen? De font, of...? Ik zie nl. niet een kopje 'theme'.
Trotse eigenaar van een Nokia N900, een Nokia N9 en een Jolla.

Offline Vistaus

  • Webteam
    • vistaus
  • Steunpunt: Nee
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #15 Gepost op: 2011/11/12, 11:16:05 »
=D
Oeps, Select GUI-style moet je hebben.

Offline Timo

  • Forumteam
    • timo.diedering
  • Steunpunt: Ja
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #16 Gepost op: 2011/11/14, 15:26:51 »
Problempje: Ik heb elke stijl geprobeerd, maar het helpt niet :(
Trotse eigenaar van een Nokia N900, een Nokia N9 en een Jolla.

Offline Dave

  • Lid
  • Steunpunt: Nee
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #17 Gepost op: 2011/11/14, 17:47:12 »
leuke tip dat mixxx
Heb de stabiele versie mét ppa gedaan dus krijg vanzelf de laatste dan.


Offline niekn

  • Lid
    • omega-xis
  • Steunpunt: Nee
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #18 Gepost op: 2011/11/14, 19:36:36 »
voor in de kroeg kun je de auto-dj gebruiken, die crossfade het einde en het begin van nummers automatisch door elkaar.

Offline Ocean Eyes

  • Lid
  • Steunpunt: Nee
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #19 Gepost op: 2011/11/14, 21:24:19 »
Heb voor een tuinfeestje deze zomer dit programma gebruikt op auto dj , SUPER...
Wel wat werk ingestoken in een deftige playlist en zo werden de liedjes zeer goed in elkaar gemixt!
Veel gasten zijn komen loeren naar mijn linux systeem en waren onder de indruk, van linux en van mixxx.
Met vriendelijke groeten,
Wim

Offline Joris Donders

  • Lid
  • Steunpunt: Nee
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #20 Gepost op: 2011/11/15, 17:17:34 »
Ik krijg die auto-dj gewoon niet aan de praat ??? al de rest wel , maar dat item niet (zal wel aan mij liggen maar ik weet niet wat ik verkeerd doe)


Edit: het is al opgelost; het lukt wel degelijk ! Geduld is een schone zaak eh ;)

Toch een heel cool progje !! Ga ik veel gebruik van maken.
« Laatst bewerkt op: 2011/11/15, 17:22:17 door Joris Donders »
Gubuntu 17.04 wegens verdwijnen Unity binnenkort

Offline Kakysan

  • Lid
    • Het computermannetje
  • Steunpunt: Nee
Re: Nieuwe Mixxx software voor o.a. dj's !!
« Reactie #21 Gepost op: 2011/11/16, 12:02:48 »
Wel wat werk ingestoken in een deftige playlist en zo werden de liedjes zeer goed in elkaar gemixt!

Kijk, dat is nou precies het belangrijkste van een dj. Een goed playlist maken. Waarmee je de playlist tenslotte me afspeelt is minder belangrijk. Met rhythmbox kun je ook eenvoudig nummer in elkaar over laten lopen.
Maar dat is wel minder stoer natuurlijk  ;)

Groeten van Karel,



Heb voor een tuinfeestje deze zomer dit programma gebruikt op auto dj , SUPER...
Wel wat werk ingestoken in een deftige playlist en zo werden de liedjes zeer goed in elkaar gemixt!
Veel gasten zijn komen loeren naar mijn linux systeem en waren onder de indruk, van linux en van mixxx.
Ik gebruik Linux Ubuntu 12.04 Unity & Windows 8.1

Mijn overstap weblogs zijn: http://overstappen2ubuntu.wordpress.com & http://overstappen2linuxmint.wordpress.com