Je kan perfect verschilende linux installaties op een swap partitie laten werken. Doe ik ook.
Om dreamlinux in het opstartmenu te krijgen moet je /boot/grub/menu.lst aanpassen.
Hier moet namelijk een paar lijntjes bij voor dreamlinux.
Normaal kan je zien welke in de /boot/grub/menu.lst van dreamlinux.
Maar je zegt dat je die partitie niet kan benaderen?
Nee, ik zou niet weten hoe ik erin moet komen, maar dat zegt misschien wel veel over mijn kennisniveau.....
Hier heb je mijn boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/hda4 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,3)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery mode) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Ubuntu, kernel 2.6.15-27-386
root (hd0,3)
kernel /boot/vmlinuz-2.6.15-27-386 root=/dev/hda4 ro quiet splash
initrd /boot/initrd.img-2.6.15-27-386
savedefault
boot
title Ubuntu, kernel 2.6.15-27-386 (recovery mode)
root (hd0,3)
kernel /boot/vmlinuz-2.6.15-27-386 root=/dev/hda4 ro single
initrd /boot/initrd.img-2.6.15-27-386
boot
title Ubuntu, kernel 2.6.15-23-386
root (hd0,3)
kernel /boot/vmlinuz-2.6.15-23-386 root=/dev/hda4 ro quiet splash
initrd /boot/initrd.img-2.6.15-23-386
savedefault
boot
title Ubuntu, kernel 2.6.15-23-386 (recovery mode)
root (hd0,3)
kernel /boot/vmlinuz-2.6.15-23-386 root=/dev/hda4 ro single
initrd /boot/initrd.img-2.6.15-23-386
boot
title Ubuntu, memtest86+
root (hd0,3)
kernel /boot/memtest86+.bin
boot
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda1
title Windows NT/2000/XP
root (hd0,0)
savedefault
makeactive
chainloader +1
En dan nu, om de zaak compleet te maken nog ff mijn fdisk:
sudo fdisk -l
Password:
Schijf /dev/hda: 80.0 GB, 80026361856 bytes
255 koppen, 63 sectoren/spoor, 9729 cylinders
Eenheden = cylinders van 16065 * 512 = 8225280 bytes
Apparaat Boot Start Einde Blokken Id Systeem
/dev/hda1 * 1 3873 31109841 7 HPFS/NTFS
/dev/hda2 3874 7432 28587667+ 83 Linux
/dev/hda3 9456 9729 2200905 5 Uitgebreid
/dev/hda4 7433 9455 16249747+ 83 Linux
/dev/hda5 9546 9729 1477948+ 82 Linux-swap / Solaris
/dev/hda6 9456 9545 722862 82 Linux-swap / Solaris
Partitietabel ingangen zijn niet in schijfvolgorde
op 1 windows
2 theoretisch zit daar dreamlinux
wat op 3 zit is mij een volkomen raadsel
4 ubuntu
5,6 swapjes
