Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Scherm resolutie Ubuntu 11.04 Xorg (Opgelost)  (gelezen 5509 keer)

Offline t1m

  • Lid
  • Steunpunt: Nee
Scherm resolutie Ubuntu 11.04 Xorg (Opgelost)
« Gepost op: 2011/05/15, 23:13:52 »
Ik heb een nieuwe installatie gedaan van Ubuntu 11.04, hiervoor had ik 10.10. Mijn probleem is echter dat mijn beeld nu maar 1024x768 60 Hz is in plaats van 1280x1024 met 75 Hz. In Ubuntu 10.10 had ik dit probleem eerst ook, toen moest ik handmatig een Xorg file aanmaken de inhoud daarvan had ik gekopieerd van internet omdat het me zelf niet lukte. De inhoud zal dus wel niet kloppen. Nu in 11.04 lukt het me helemaal niet meer om beter beeld te krijgen.

Mijn computer:
HP rp5700 Business System
Intel (R) Pentium (R) Dual CPU
E2160 @ 1.80 GHz
82Q963/Q965 Integrated Graphics Controller

Hoe los ik dit op?

Alvast bedankt voor de reacties,

t1m

NB. Dit is de Xorg waarbij mijn scherm resolutie wel goed was in Ubuntu 10.10:

[tt]Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
# InputDevice "Mouse0" "CorePointer"
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
# InputDevice "Keyboard0" "CoreKeyboard"
EndSection


Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection


Section "Module"
Load "glx"
Load "extmod"
Load "dbe"
Load "dri2"
Load "dri"
Load "record"
EndSection


# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
#Section "InputDevice"
# Identifier "Keyboard0"
# Driver "kbd"
#EndSection


# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
#Section "InputDevice"
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/input/mice"
# Option "ZAxisMapping" "4 5 6 7"
#EndSection


Section "Monitor"
Identifier "Monitor0"
HorizSync 76.00 - 81.00
VertRefresh 75.0
VendorName "Lenova"
ModelName "L1900p"
EndSection


Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "82945G/GZ Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection


Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection [/tt]
« Laatst bewerkt op: 2011/06/01, 00:31:38 door t1m »

Offline jan11000

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #1 Gepost op: 2011/05/16, 07:28:54 »
Laatste gedeelte lijkt mij niet goed. Daar staan niet de grootte's van de scherm

Hier is een link met 2 voorbeelden(let op dit is voor oudere ubuntu tav drivers).
http://ubuntuforums.org/showthread.php?t=420185&highlight=intel+video&page=4

Offline t1m

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #2 Gepost op: 2011/05/16, 12:32:34 »
Wanneer ik doe:
sudo Xorg -configureKrijg ik dit als response:

(EE) Failed to load module ''vmwgfx'' (module does not exist, 0)
(EE) vmware: Please ignore the above warnings about not being able to to load module/driver vmwgfx
(EE) vmware: Unexpected failure while loading the ''vmwlegacy'' driver. Giving up.
(EE) Failed to load module ''vmware'' (a required submodule could not be loaded, -1077780296)
(++) Using config file: ''/root/xorg.conf.new''
(==) Using system config directory ''/usr/share/X11/xorg.conf.d''
Number of created screens does not match number of detected devices.
    Configuration failed.
  ddxSigGiveUp: Closing log



Offline t1m

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #3 Gepost op: 2011/05/17, 21:39:09 »
Door de command Xorg -configure is er in de root directory wel een xorg.conf.new ontstaan. 2 vragen hierover, ten eerste hoe zou ik die aan moeten passen? En tweede naar welke folder moet ik die kopieren als xorg.conf? Is het de /etc/X11/ folder of de /usr/share/X11/ folder?

Ik post hieronder maar de xorg.conf.new, ik heb geen idee of deze er in 10.10 hetzelfde uitzag als nu in de 11.04 versie.

[tt]
Section "ServerLayout"
Identifier     "X.org Configured"
Screen      0  "Screen0" 0 0
Screen      1  "Screen1" RightOf "Screen0"
Screen      2  "Screen2" RightOf "Screen1"
InputDevice    "Mouse0" "CorePointer"
InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath   "/usr/lib/xorg/modules"
FontPath     "/usr/share/fonts/X11/misc"
FontPath     "/usr/share/fonts/X11/cyrillic"
FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath     "/usr/share/fonts/X11/Type1"
FontPath     "/usr/share/fonts/X11/100dpi"
FontPath     "/usr/share/fonts/X11/75dpi"
FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath     "built-ins"
EndSection

Section "Module"
Load  "dbe"
Load  "glx"
Load  "dri"
Load  "extmod"
Load  "record"
Load  "dri2"
EndSection

Section "InputDevice"
Identifier  "Keyboard0"
Driver      "kbd"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver      "mouse"
Option     "Protocol" "auto"
Option     "Device" "/dev/input/mice"
Option     "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier   "Monitor0"
VendorName   "Monitor Vendor"
ModelName    "Monitor Model"
EndSection

Section "Monitor"
Identifier   "Monitor1"
VendorName   "Monitor Vendor"
ModelName    "Monitor Model"
EndSection

Section "Monitor"
Identifier   "Monitor2"
VendorName   "Monitor Vendor"
ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "AccelMethod"        # [<str>]
        #Option     "DRI"                # [<bool>]
        #Option     "ColorKey"            # <i>
        #Option     "VideoKey"            # <i>
        #Option     "FallbackDebug"      # [<bool>]
        #Option     "Tiling"              # [<bool>]
        #Option     "Shadow"              # [<bool>]
        #Option     "SwapbuffersWait"    # [<bool>]
        #Option     "XvMC"                # [<bool>]
        #Option     "XvPreferOverlay"    # [<bool>]
        #Option     "DebugFlushBatches"  # [<bool>]
        #Option     "DebugFlushCaches"    # [<bool>]
        #Option     "DebugWait"          # [<bool>]
        #Option     "HotPlug"            # [<bool>]
        #Option     "RelaxedFencing"      # [<bool>]
Identifier  "Card0"
Driver      "intel"
BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"            # [<bool>]
        #Option     "Rotate"              # <str>
        #Option     "fbdev"              # <str>
        #Option     "debug"              # [<bool>]
Identifier  "Card1"
Driver      "fbdev"
BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"            # [<bool>]
        #Option     "DefaultRefresh"      # [<bool>]
        #Option     "ModeSetClearScreen" # [<bool>]
Identifier  "Card2"
Driver      "vesa"
BusID       "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device     "Card0"
Monitor    "Monitor0"
SubSection "Display"
Viewport   0 0
Depth     1
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     4
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     8
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     15
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     16
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device     "Card1"
Monitor    "Monitor1"
SubSection "Display"
Viewport   0 0
Depth     1
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     4
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     8
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     15
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     16
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen2"
Device     "Card2"
Monitor    "Monitor2"
SubSection "Display"
Viewport   0 0
Depth     1
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     4
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     8
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     15
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     16
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     24
EndSubSection
EndSection
[/tt]

« Laatst bewerkt op: 2011/05/17, 22:03:57 door heir4c »

Offline MauRice2

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #4 Gepost op: 2011/05/17, 22:00:23 »
T1m,

Viewport 0 0 kan je beter vermijden.
Beter is Modes "1280x1024" te gebruiken in Section "Screen".
Wil je nog de refresh-rate van 75Hz erbij hebben dan wordt:
Option "metamodes" "1280x1024_75"

Ook die dubbele Screen en Device er uit halen.

Voor voorbeelden van diverse xorg.conf die ik gebruik:
http://users.telenet.be/x86_64/Scripts/

Info:
http://linux.die.net/man/5/xorg.conf
http://linux.die.net/man/1/xorg

MvG,
MauRice
Registered Linux user: 473556

Offline heir4c

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #5 Gepost op: 2011/05/17, 22:06:26 »
Je kan die xorg.conf gewoon in je Persoonlijke Map plaatsen. Dus NAAST de mappen Documenten; Afbeeldingen; Bureaublad; Downloads; enz.... (dus NIET in één van deze mappen.)
Er word namelijk ook in je Persoonlijk Map gekeken of er ergens configuratie bestanden in staan.
Het bestand hoeft dus niet onder /etc/X11 te staan.

Offline t1m

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #6 Gepost op: 2011/05/18, 18:14:56 »
Allereerst bedankt voor de reacties. Ik heb nu een xorg.conf file in /etc/X11/ geplaatst. Ik heb hiervoor het voorbeeld van http://users.telenet.be/x86_64/Scripts/ gebruikt en daaraan Modes "1280x1024" toegevoegd. De computer start bij deze xorg.conf wel op alleen niet in 1280x1024 maar in 1024x768. Wanneer ik gebruik maar van mijn oude/hierboven geposte xorg.conf start de computer niet meer op en moet ik in graphic safe modus opstarten en daarna de xorg.conf weer verwijderen.

Waar zou ik precies de Option "metamodes" "1280x1024_75" moeten plaatsen?

Dit is de xorg.conf die ik nu heb, waarbij de computer dus wel opstart maar hij pakt die 1280x1024 resolutie niet:

[tt]Section "ServerFlags"
    Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort)
    #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
EndSection

Section "Module"
    Load "v4l" # Video for Linux
EndSection

Section "Monitor"
    Identifier "monitor1"
    VendorName "Generic"
    ModelName "Flat Panel 1280x1024"
    HorizSync 31.5-48.0
    VertRefresh 56.0-65.0
    Option "PreferredMode" "1280x1024"
   
    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
   
    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
EndSection

Section "Device"
    Identifier "device1"
    VendorName "Intel Corporation"
    BoardName "Intel 810 and later"
    Driver "intel"
    Option "DPMS"
EndSection

Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 24
   
    Subsection "Display"
        Depth 8
        Modes "1280x1024" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
   
    Subsection "Display"
        Depth 15
        Modes "1280x1024" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
   
    Subsection "Display"
        Depth 16
        Modes "1280x1024" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
   
    Subsection "Display"
        Depth 24
        Modes "1280x1024" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier "layout1"
    Screen "screen1"
EndSection
[/tt]
« Laatst bewerkt op: 2011/05/18, 19:18:37 door heir4c »

Offline MauRice2

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #7 Gepost op: 2011/05/18, 18:41:31 »
T1m,

Veel kan je nalezen in je log-bestand:  /var/log/Xorg.0.log
Daar in zal je ook lezen waarom het niet in 1280x1024 wil gaan.

Option         "metamodes" "1280x1024_75 +0+0" komt in Section "Screen" te staan.
Zie de xorg.conf.nVidia.

In Section "Monitor";  
Option       "IgnoreEDID"   "True"     zetten kan ook helpen.
Betekent dat de communicatie tussen de VGA-kaart en Monitor betreft resolutie's ed wordt uitgezet.
Kan je in het log-bestand nalezen of er fouten zijn met betrekking EDID.

Die xorg.conf.InTel is van een Laptop met Mageia.
Sommige Option worden door Ubuntu niet uitgevoed, zie log-bestand.
Maar heeft niets met resolutie te maken.

nVidia heeft een grafische tool waarmee je alles kan instellen.
Die kaarten zitten in mijn Desktop PC.
De ATi kaarten liggen in de kast, en de Intel zit in mijn laptop.



« Laatst bewerkt op: 2011/05/18, 19:15:22 door MauRice2 »
MvG,
MauRice
Registered Linux user: 473556

Offline heir4c

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #8 Gepost op: 2011/05/18, 19:21:13 »
t1m, Even een opmerking: Als je zo'n bestand in een bericht zet, zet het dan even tussen code-tags. Je klikt op de knop met het "hekje" ( het # teken) dat boven het invoer veld staat als je een bericht intikt. Dan komt deze code in een venster te staan zoals ik reeds met je voorgaande berichten gedaan heb. Dat scheelt in het scrollen door de berichten. ThanX


En inplaats van een _ te gebruiken kan je ook een @ gebruiken. bijvoorbeeld: 1280x1024@75
Je kan ook meerdere dezelfd resoluties na elkaar zetten met een verschillende verversing: "1280x1024@60"   "1280x1024@72"   "1280x1024@75" enz.....

Offline t1m

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #9 Gepost op: 2011/05/18, 19:31:56 »
Met deze xorg.conf lukt het opstarten weer niet. Ik krijg een zwart scherm met onder andere de foutmelding 'stopping automatic crash report' fail
Dan moet ik de xorg.conf weer verwijderen via opstarten in veilige grafische modus.

Ik heb hem nu als code weergegeven. Excuses, snap dat dat scrollen irritant is.
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (mandrake@klodia.mandriva.com)  Tue May  4 23:38:39 UTC 2010

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
    FontPath        "/usr/share/fonts/default/Type1"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from data in "/etc/sysconfig/keyboard"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbLayout" "us"
    Option         "XkbModel" "pc105"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Philips 220SW"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
    Option       "IgnoreEDID"   "True"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8800 GTS"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1280x1024_75 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection


Offline MauRice2

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #10 Gepost op: 2011/05/18, 19:55:05 »
Met deze xorg.conf lukt het opstarten weer niet. Ik krijg een zwart scherm met onder andere de foutmelding 'stopping automatic crash report' fail
Dan moet ik de xorg.conf weer verwijderen via opstarten in veilige grafische modus.

Ik heb hem nu als code weergegeven. Excuses, snap dat dat scrollen irritant is.
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (mandrake@klodia.mandriva.com)  Tue May  4 23:38:39 UTC 2010

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
    FontPath        "/usr/share/fonts/default/Type1"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from data in "/etc/sysconfig/keyboard"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbLayout" "us"
    Option         "XkbModel" "pc105"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Philips 220SW"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
    Option       "IgnoreEDID"   "True"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8800 GTS"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1280x1024_75 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

T1m,

Dat verbaast me niets. Deze is voor een nVidia kaart.
Citaat
Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8800 GTS"
EndSection

Daar moet bij jouw intel staan ipv nvidia. VendorName en BoardName ook aanpassen voor de duidelijkheid.
In Section "Screen":
Citaat
Option         "TwinView" "0"
Er ook uithalen.

In Section "Monitor", ModelName en ModelName aanpassen voor de duidelijkeid.
De HorizSync en VertRefresh zijn waarden voor mijn 22" scherm
Beter zullen de waarden zijn van de 15" laptop:
Citaat
   HorizSync 31.5 - 48.0
    VertRefresh 56.0 - 65.0
of die van een 17" CRT monitor:
Citaat
   HorizSync 30.0 - 72.0
    VertRefresh 50.0 - 120.0
« Laatst bewerkt op: 2011/05/18, 19:58:02 door MauRice2 »
MvG,
MauRice
Registered Linux user: 473556

Offline t1m

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #11 Gepost op: 2011/05/19, 01:25:07 »
Mijn computer start nu in ieder geval op met deze xorg.conf. Verder heb ik wel weer de resolutie 1024x768 en kan ik bij monitors niet kiezen voor de gewenste 1280x1024

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
    FontPath        "/usr/share/fonts/default/Type1"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from data in "/etc/sysconfig/keyboard"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbLayout" "us"
    Option         "XkbModel" "pc105"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "CTX"
    ModelName      "CTX S700BA"
    HorizSync       30.0 - 72.0
    VertRefresh     50.0 - 120.0
    Option         "DPMS"
    Option       "IgnoreEDID"   "True"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "intel"
    VendorName     "Intel Corporation"
    BoardName      "82Q963/Q965 Integrated Graphics Controller"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "metamodes" "1280x1024_75 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
« Laatst bewerkt op: 2011/05/19, 01:33:02 door t1m »

Offline MauRice2

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #12 Gepost op: 2011/05/19, 18:43:53 »
T1m,

Staat er in het log bestand /var/log/Xorg.0.log iets bruikbaars waarom je de resolutie 1280x1024 niet gaat.

Het kan zijn dat Option         "metamodes" "1280x1024_75 +0+0" alleen voor nVidia kaarten geldig is.
Dan wordt je Section "Screen":
Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
   
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024"
    EndSubSection
EndSection

MvG,
MauRice
Registered Linux user: 473556

Offline t1m

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #13 Gepost op: 2011/05/22, 15:46:15 »
Wanneer ik die metamodes weghaal en het xorg.conf dus aanpas zoals jij aangaf dan krijg ik alsnog maar een resolutie van 1024x768.

Ik post het Xorg.0.log maar, want veel wijzer word ik er zelf niet van.

[    16.307]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[    16.307] X Protocol Version 11, Revision 0
[    16.307] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
[    16.307] Current Operating System: Linux t-HP-rp5700-Business-System 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686
[    16.307] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=fa8360d3-8197-4373-ba3c-e1596542b1af ro quiet splash vt.handoff=7
[    16.308] Build Date: 19 April 2011  03:33:17PM
[    16.308] xorg-server 2:1.10.1-1ubuntu1 (For technical support please see http://www.ubuntu.com/support)
[    16.308] Current version of pixman: 0.20.2
[    16.308] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    16.308] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    16.308] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 22 15:32:59 2011
[    16.308] (==) Using config file: "/etc/X11/xorg.conf"
[    16.308] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    16.308] (==) ServerLayout "Layout0"
[    16.308] (**) |-->Screen "Screen0" (0)
[    16.308] (**) |   |-->Monitor "Monitor0"
[    16.309] (**) |   |-->Device "Device0"
[    16.309] (**) |-->Input Device "Keyboard0"
[    16.309] (**) |-->Input Device "Mouse0"
[    16.309] (**) Option "Xinerama" "0"
[    16.309] (==) Automatically adding devices
[    16.309] (==) Automatically enabling devices
[    16.309] (WW) The directory "/usr/share/fonts/default/Type1" does not exist.
[    16.309] Entry deleted from font path.
[    16.309] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    16.309] Entry deleted from font path.
[    16.309] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    16.309] Entry deleted from font path.
[    16.309] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    16.309] Entry deleted from font path.
[    16.309] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    16.309] Entry deleted from font path.
[    16.309] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    16.309] Entry deleted from font path.
[    16.309] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[    16.309] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    16.309] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    16.309] (WW) Disabling Keyboard0
[    16.309] (WW) Disabling Mouse0
[    16.309] (II) Loader magic: 0x81ffde0
[    16.309] (II) Module ABI versions:
[    16.309] X.Org ANSI C Emulation: 0.4
[    16.309] X.Org Video Driver: 10.0
[    16.309] X.Org XInput driver : 12.3
[    16.309] X.Org Server Extension : 5.0
[    16.311] (--) PCI:*(0:0:2:0) 8086:2992:103c:2817 rev 2, Mem @ 0xf0400000/1048576, 0xe0000000/268435456, I/O @ 0x000021e0/8
[    16.311] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    16.311] (II) LoadModule: "extmod"
[    16.332] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    16.333] (II) Module extmod: vendor="X.Org Foundation"
[    16.333] compiled for 1.10.1, module version = 1.0.0
[    16.333] Module class: X.Org Server Extension
[    16.333] ABI class: X.Org Server Extension, version 5.0
[    16.333] (II) Loading extension MIT-SCREEN-SAVER
[    16.333] (II) Loading extension XFree86-VidModeExtension
[    16.333] (II) Loading extension XFree86-DGA
[    16.333] (II) Loading extension DPMS
[    16.333] (II) Loading extension XVideo
[    16.333] (II) Loading extension XVideo-MotionCompensation
[    16.333] (II) Loading extension X-Resource
[    16.333] (II) LoadModule: "dbe"
[    16.333] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    16.333] (II) Module dbe: vendor="X.Org Foundation"
[    16.333] compiled for 1.10.1, module version = 1.0.0
[    16.333] Module class: X.Org Server Extension
[    16.333] ABI class: X.Org Server Extension, version 5.0
[    16.333] (II) Loading extension DOUBLE-BUFFER
[    16.333] (II) LoadModule: "glx"
[    16.333] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.334] (II) Module glx: vendor="X.Org Foundation"
[    16.334] compiled for 1.10.1, module version = 1.0.0
[    16.334] ABI class: X.Org Server Extension, version 5.0
[    16.334] (==) AIGLX enabled
[    16.334] (II) Loading extension GLX
[    16.334] (II) LoadModule: "record"
[    16.334] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    16.334] (II) Module record: vendor="X.Org Foundation"
[    16.334] compiled for 1.10.1, module version = 1.13.0
[    16.334] Module class: X.Org Server Extension
[    16.334] ABI class: X.Org Server Extension, version 5.0
[    16.334] (II) Loading extension RECORD
[    16.334] (II) LoadModule: "dri"
[    16.334] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    16.335] (II) Module dri: vendor="X.Org Foundation"
[    16.335] compiled for 1.10.1, module version = 1.0.0
[    16.335] ABI class: X.Org Server Extension, version 5.0
[    16.335] (II) Loading extension XFree86-DRI
[    16.335] (II) LoadModule: "dri2"
[    16.335] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    16.335] (II) Module dri2: vendor="X.Org Foundation"
[    16.335] compiled for 1.10.1, module version = 1.2.0
[    16.335] ABI class: X.Org Server Extension, version 5.0
[    16.335] (II) Loading extension DRI2
[    16.335] (II) LoadModule: "intel"
[    16.336] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    16.336] (II) Module intel: vendor="X.Org Foundation"
[    16.336] compiled for 1.10.1, module version = 2.14.0
[    16.336] Module class: X.Org Video Driver
[    16.336] ABI class: X.Org Video Driver, version 10.0
[    16.336] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[    16.337] (++) using VT number 7

[    16.340] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    16.340] drmOpenDevice: node name is /dev/dri/card0
[    16.340] drmOpenDevice: open result is 8, (OK)
[    16.340] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    16.340] drmOpenDevice: node name is /dev/dri/card0
[    16.340] drmOpenDevice: open result is 8, (OK)
[    16.340] drmOpenByBusid: drmOpenMinor returns 8
[    16.340] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    16.340] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[    16.340] (==) intel(0): RGB weight 888
[    16.340] (==) intel(0): Default visual is TrueColor
[    16.340] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965Q
[    16.340] (--) intel(0): Chipset: "965Q"
[    16.340] (**) intel(0): Relaxed fencing enabled
[    16.340] (**) intel(0): Tiling enabled
[    16.340] (**) intel(0): SwapBuffers wait enabled
[    16.340] (==) intel(0): video overlay key set to 0x101fe
[    16.358] (II) intel(0): Output VGA1 using monitor section Monitor0
[    16.374] (II) intel(0): EDID for output VGA1
[    16.374] (II) intel(0): Printing probed modes for output VGA1
[    16.374] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    16.374] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    16.374] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    16.374] (II) intel(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz)
[    16.374] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz)
[    16.374] (II) intel(0): Output VGA1 connected
[    16.374] (II) intel(0): Using fuzzy aspect match for initial modes
[    16.374] (II) intel(0): Output VGA1 using initial mode 1024x768
[    16.374] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    16.374] (II) intel(0): Kernel page flipping support detected, enabling
[    16.374] (==) intel(0): DPI set to (96, 96)
[    16.374] (II) Loading sub module "fb"
[    16.374] (II) LoadModule: "fb"
[    16.375] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.375] (II) Module fb: vendor="X.Org Foundation"
[    16.375] compiled for 1.10.1, module version = 1.0.0
[    16.375] ABI class: X.Org ANSI C Emulation, version 0.4
[    16.375] (==) Depth 24 pixmap format is 32 bpp
[    16.375] (==) intel(0): VideoRam: 262144 KB
[    16.375] (II) intel(0): [DRI2] Setup complete
[    16.375] (II) intel(0): [DRI2]   DRI driver: i965
[    16.375] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[    16.436] (II) UXA(0): Driver registered support for the following operations:
[    16.436] (II)         solid
[    16.436] (II)         copy
[    16.436] (II)         composite (RENDER acceleration)
[    16.436] (II)         put_image
[    16.436] (II)         get_image
[    16.436] (==) intel(0): Backing store disabled
[    16.436] (==) intel(0): Silken mouse enabled
[    16.436] (II) intel(0): Initializing HW Cursor
[    16.456] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    16.456] (**) intel(0): DPMS enabled
[    16.456] (==) intel(0): Intel XvMC decoder enabled
[    16.456] (II) intel(0): Set up textured video
[    16.456] (II) intel(0): Set up overlay video
[    16.456] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[    16.456] (II) intel(0): direct rendering: DRI2 Enabled
[    16.456] (WW) intel(0): Option "IgnoreEDID" is not used
[    16.456] (==) intel(0): hotplug detection: "enabled"
[    16.456] (--) RandR disabled
[    16.456] (II) Initializing built-in extension Generic Event Extension
[    16.456] (II) Initializing built-in extension SHAPE
[    16.456] (II) Initializing built-in extension MIT-SHM
[    16.456] (II) Initializing built-in extension XInputExtension
[    16.456] (II) Initializing built-in extension XTEST
[    16.456] (II) Initializing built-in extension BIG-REQUESTS
[    16.456] (II) Initializing built-in extension SYNC
[    16.456] (II) Initializing built-in extension XKEYBOARD
[    16.456] (II) Initializing built-in extension XC-MISC
[    16.456] (II) Initializing built-in extension SECURITY
[    16.456] (II) Initializing built-in extension XINERAMA
[    16.456] (II) Initializing built-in extension XFIXES
[    16.456] (II) Initializing built-in extension RENDER
[    16.456] (II) Initializing built-in extension RANDR
[    16.456] (II) Initializing built-in extension COMPOSITE
[    16.456] (II) Initializing built-in extension DAMAGE
[    16.456] (II) Initializing built-in extension GESTURE
[    16.471] (II) AIGLX: Trying DRI driver /usr/lib/dri/i965_dri.so
[    16.475] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    16.475] (II) AIGLX: enabled GLX_INTEL_swap_event
[    16.475] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    16.475] (II) AIGLX: enabled GLX_SGI_make_current_read
[    16.475] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    16.475] (II) AIGLX: Loaded and initialized i965
[    16.475] (II) GLX: Initialized DRI2 GL provider for screen 0
[    16.476] (II) intel(0): Setting screen physical size to 270 x 203
[    16.494] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    16.509] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    16.509] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.509] (II) LoadModule: "evdev"
[    16.510] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.511] (II) Module evdev: vendor="X.Org Foundation"
[    16.511] compiled for 1.10.0.902, module version = 2.6.0
[    16.511] Module class: X.Org XInput Driver
[    16.511] ABI class: X.Org XInput driver, version 12.3
[    16.511] (II) Using input driver 'evdev' for 'Power Button'
[    16.511] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.511] (**) Power Button: always reports core events
[    16.511] (**) Power Button: Device: "/dev/input/event1"
[    16.520] (--) Power Button: Found keys
[    16.520] (II) Power Button: Configuring as keyboard
[    16.520] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    16.520] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    16.520] (**) Option "xkb_rules" "evdev"
[    16.520] (**) Option "xkb_model" "pc105"
[    16.520] (**) Option "xkb_layout" "us"
[    16.521] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    16.521] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    16.521] (II) Using input driver 'evdev' for 'Video Bus'
[    16.521] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.521] (**) Video Bus: always reports core events
[    16.521] (**) Video Bus: Device: "/dev/input/event5"
[    16.536] (--) Video Bus: Found keys
[    16.536] (II) Video Bus: Configuring as keyboard
[    16.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[    16.536] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    16.536] (**) Option "xkb_rules" "evdev"
[    16.536] (**) Option "xkb_model" "pc105"
[    16.536] (**) Option "xkb_layout" "us"
[    16.539] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    16.540] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.540] (II) Using input driver 'evdev' for 'Power Button'
[    16.540] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.540] (**) Power Button: always reports core events
[    16.540] (**) Power Button: Device: "/dev/input/event0"
[    16.556] (--) Power Button: Found keys
[    16.556] (II) Power Button: Configuring as keyboard
[    16.556] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    16.556] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    16.556] (**) Option "xkb_rules" "evdev"
[    16.556] (**) Option "xkb_model" "pc105"
[    16.556] (**) Option "xkb_layout" "us"
[    16.559] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3)
[    16.559] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[    16.559] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[    16.559] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.559] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[    16.559] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3"
[    16.572] (--) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[    16.572] (--) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[    16.572] (--) Logitech USB-PS/2 Optical Mouse: Found relative axes
[    16.572] (--) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[    16.572] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[    16.572] (II) Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[    16.572] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[    16.572] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    16.572] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3/event3"
[    16.572] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
[    16.572] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[    16.572] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[    16.572] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[    16.572] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[    16.572] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[    16.573] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[    16.573] (II) No input driver/identifier specified (ignoring)
[    16.583] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    16.583] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    16.583] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    16.583] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.583] (**) AT Translated Set 2 keyboard: always reports core events
[    16.583] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    16.592] (--) AT Translated Set 2 keyboard: Found keys
[    16.592] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    16.592] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    16.592] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    16.592] (**) Option "xkb_rules" "evdev"
[    16.592] (**) Option "xkb_model" "pc105"
[    16.592] (**) Option "xkb_layout" "us"
[    16.600] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event4)
[    16.600] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    16.600] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    16.600] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.600] (**) HP WMI hotkeys: always reports core events
[    16.600] (**) HP WMI hotkeys: Device: "/dev/input/event4"
[    16.601] (--) HP WMI hotkeys: Found keys
[    16.601] (II) HP WMI hotkeys: Configuring as keyboard
[    16.601] (**) Option "config_info" "udev:/sys/devices/virtual/input/input4/event4"
[    16.601] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[    16.601] (**) Option "xkb_rules" "evdev"
[    16.601] (**) Option "xkb_model" "pc105"
[    16.601] (**) Option "xkb_layout" "us"

Offline MauRice2

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #14 Gepost op: 2011/05/22, 16:32:53 »
T1m,

Zo te lezen in de het log-bestand kan die niet hoger dan 1024x768.
Er is ook te lezen dat Option  "IgnoreEDID"   "True" niet herkent cq gebruikt wordt.
Na wat uitpluizen op het internet... Verander deze in Option   "Ignore"   "True", en herstart de X-server.(<Ctrl> + <Alt> + <Backspace>)
MvG,
MauRice
Registered Linux user: 473556

Offline t1m

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #15 Gepost op: 2011/05/22, 16:52:33 »
Wanneer de optie Option   "Ignore"   "True" is dan start de computer niet op en staat er onder andere die foutmelding 'automatic crash report. [Fail]'. Wanneer ik die optie dan weer verander in Option  "IgnoreEDID"   "True", dan start de computer wel weer gewoon op, weliswaar met een resolutie van 1024x768. Heel raar dit toch? dan gebruikt hij die option wel zou je zeggen.

Offline MauRice2

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #16 Gepost op: 2011/05/22, 17:22:08 »
Wanneer de optie Option   "Ignore"   "True" is dan start de computer niet op en staat er onder andere die foutmelding 'automatic crash report. [Fail]'. Wanneer ik die optie dan weer verander in Option  "IgnoreEDID"   "True", dan start de computer wel weer gewoon op, weliswaar met een resolutie van 1024x768. Heel raar dit toch? dan gebruikt hij die option wel zou je zeggen.
T1m,

Als je de log-bestand op na lees niet:
Citaat
[    16.456] (WW) intel(0): Option "IgnoreEDID" is not used
De enigste manier is deze als commentaar te zetten, door er een # teken er voor te zetten.
En kijken wat het verschil is.
MvG,
MauRice
Registered Linux user: 473556

Offline t1m

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #17 Gepost op: 2011/05/22, 17:36:28 »
Ik heb dit er inderdaad van gemaakt:

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "CTX"
    ModelName      "CTX S700BA"
    HorizSync       30.0 - 72.0
    VertRefresh     50.0 - 120.0
    Option         "DPMS"
    # Option  "IgnoreEDID"   "True"

Maar goed het probleem met de resolutie blijft. Dit is de enige manier om een mode/resolutie toe te voegen?
Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24

    SubSection     "Display"
        Depth       24
Modes      "1280x1024"
    EndSubSection

Uit die Xorg.0.log kan ik nou niet echt opmaken dat hij probeert deze resolutie te pakken en dat het mislukt ofzo. Moet er geen modeline toe worden gevoegd bij monitor, of praat ik nu onzin?

Offline MauRice2

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #18 Gepost op: 2011/05/22, 19:05:49 »
T1m,

Je kan eens kijken hoe het opstart zonder een xorg.conf bestand.
Deze te hernoemen of verplaatsen.
Dan gebruik het de standaard waarden.
*buntu heeft geen xorg.conf nodig om op te starten.

Kan je ook zien met de opdrachtxrandr -qin een terminal welke resolutie je scherm aankan.
Staat 1280x1024 ertussen. Dan kan je met de opdracht:
xrandr -s 1280x1024
de boel forceren.

Al bij al vind ik het vreemd dat je via een xorg.conf het niet kan ....
MvG,
MauRice
Registered Linux user: 473556

Offline t1m

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #19 Gepost op: 2011/05/22, 19:19:51 »
t@t-HP-rp5700-Business-System:~$ xrandr -q
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1024x768       60.0*
   800x600        60.3     56.2 
   848x480        60.0 
   640x480        59.9 
t@t-HP-rp5700-Business-System:~$ xrandr -s 1280x1024
Size 1280x1024 not found in available modes

Wat helemaal vreemd is is dat Ubuntu 10.10 het wel gewoon deed met een of andere gekopieerde xorg.conf van internet en nu wat we ook proberen lukt het maar niet.

Offline MauRice2

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #20 Gepost op: 2011/05/22, 19:47:34 »
T1m,

Dat is het het vreemde eraan. De mode 1280x1024 staat er gewoon niet tussen.

Nu kan je ook een xorg.conf bestand laten generen voor je systeem met Xorg.
Hoef je niet links en rechts eentje van het internet te plukken.
Geldt voor *buntu 9.10 en hoger.
Zie: -> http://ubuntulinux.co.in/blog/ubuntu/ubuntu-9-10/xorg-conf-file-create-on-ubuntu-9-10/

Het enigste wat er niet op staat is, dat na de toestencomibatie <Ctrl> + <Alt> + <F1> je eerst moet inloggen.
Maar dat wijst zich zelf.
Daarna kan je deze xorg.conf verder 'afwerken' naar je noden.

MvG,
MauRice
Registered Linux user: 473556

Offline t1m

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #21 Gepost op: 2011/05/22, 21:29:01 »
Ik heb automatisch een xorg.conf geconfigureerd. Deze heb ik aangepast d.m.v. Viewport 0 0 te vervangen door Modes "1280x1024". Ik heb de Option   "Ignore"   "True" bij monitor weer geprobeerd maar dan liep hij weer vast, dus deze heb ik toen weer verwijderd.
Ik heb alleen deze waarde nog niet toegevoegd:
   HorizSync 30.0 - 72.0
    VertRefresh 50.0 - 120.0
Ik weet ook niet of ze kloppen ik heb namelijk een 17" tft scherm.

Nog steeds hetzelfde probleem dat de resolutie van 1280x1024 niet verschijnt.

Zo ziet mijn xorg.conf er nu uit:

Section "ServerLayout"
Identifier     "X.org Configured"
Screen      0  "Screen0" 0 0
Screen      1  "Screen1" RightOf "Screen0"
Screen      2  "Screen2" RightOf "Screen1"
InputDevice    "Mouse0" "CorePointer"
InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath   "/usr/lib/xorg/modules"
FontPath     "/usr/share/fonts/X11/misc"
FontPath     "/usr/share/fonts/X11/cyrillic"
FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath     "/usr/share/fonts/X11/Type1"
FontPath     "/usr/share/fonts/X11/100dpi"
FontPath     "/usr/share/fonts/X11/75dpi"
FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath     "built-ins"
EndSection

Section "Module"
Load  "dbe"
Load  "glx"
Load  "dri"
Load  "extmod"
Load  "record"
Load  "dri2"
EndSection

Section "InputDevice"
Identifier  "Keyboard0"
Driver      "kbd"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver      "mouse"
Option    "Protocol" "auto"
Option    "Device" "/dev/input/mice"
Option    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier   "Monitor0"
VendorName   "Monitor Vendor"
ModelName    "Monitor Model"
EndSection

Section "Monitor"
Identifier   "Monitor1"
VendorName   "Monitor Vendor"
ModelName    "Monitor Model"
EndSection

Section "Monitor"
Identifier   "Monitor2"
VendorName   "Monitor Vendor"
ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "AccelMethod"         # [<str>]
        #Option     "DRI"                 # [<bool>]
        #Option     "ColorKey"           # <i>
        #Option     "VideoKey"           # <i>
        #Option     "FallbackDebug"       # [<bool>]
        #Option     "Tiling"             # [<bool>]
        #Option     "Shadow"             # [<bool>]
        #Option     "SwapbuffersWait"     # [<bool>]
        #Option     "XvMC"               # [<bool>]
        #Option     "XvPreferOverlay"     # [<bool>]
        #Option     "DebugFlushBatches"   # [<bool>]
        #Option     "DebugFlushCaches"   # [<bool>]
        #Option     "DebugWait"           # [<bool>]
        #Option     "HotPlug"             # [<bool>]
        #Option     "RelaxedFencing"     # [<bool>]
Identifier  "Card0"
Driver      "intel"
BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"           # [<bool>]
        #Option     "Rotate"             # <str>
        #Option     "fbdev"               # <str>
        #Option     "debug"               # [<bool>]
Identifier  "Card1"
Driver      "fbdev"
BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"           # [<bool>]
        #Option     "DefaultRefresh"     # [<bool>]
        #Option     "ModeSetClearScreen" # [<bool>]
Identifier  "Card2"
Driver      "vesa"
BusID       "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device     "Card0"
Monitor    "Monitor0"
SubSection "Display"
Modes "1280x1024"
Depth     1
EndSubSection
SubSection "Display"
Modes "1280x1024"
Depth     4
EndSubSection
SubSection "Display"
Modes "1280x1024"
Depth     8
EndSubSection
SubSection "Display"
Modes "1280x1024"
Depth     15
EndSubSection
SubSection "Display"
Modes "1280x1024"
Depth     16
EndSubSection
SubSection "Display"
Modes "1280x1024"
Depth     24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device     "Card1"
Monitor    "Monitor1"
SubSection "Display"
Modes "1280x1024"
Depth     1
EndSubSection
SubSection "Display"
Modes "1280x1024"
Depth     4
EndSubSection
SubSection "Display"
Modes "1280x1024"
Depth     8
EndSubSection
SubSection "Display"
Modes "1280x1024"
Depth     15
EndSubSection
SubSection "Display"
Modes "1280x1024"
Depth     16
EndSubSection
SubSection "Display"
Modes "1280x1024"
Depth     24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen2"
Device     "Card2"
Monitor    "Monitor2"
SubSection "Display"
Modes "1280x1024"
Depth     1
EndSubSection
SubSection "Display"
Modes "1280x1024"
Depth     4
EndSubSection
SubSection "Display"
Modes "1280x1024"
Depth     8
EndSubSection
SubSection "Display"
Modes "1280x1024"
Depth     15
EndSubSection
SubSection "Display"
Modes "1280x1024"
Depth     16
EndSubSection
SubSection "Display"
Modes "1280x1024"
Depth     24
EndSubSection
EndSection

Mijn Xorg.0.log past niet meer dus die post ik hieronder.
« Laatst bewerkt op: 2011/05/22, 21:35:20 door t1m »

Offline t1m

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #22 Gepost op: 2011/05/22, 21:32:31 »
1ste helft Xorg.0.log:

[    16.332]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[    16.332] X Protocol Version 11, Revision 0
[    16.332] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
[    16.332] Current Operating System: Linux t-HP-rp5700-Business-System 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686
[    16.332] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=fa8360d3-8197-4373-ba3c-e1596542b1af ro quiet splash vt.handoff=7
[    16.332] Build Date: 19 April 2011  03:33:17PM
[    16.332] xorg-server 2:1.10.1-1ubuntu1 (For technical support please see http://www.ubuntu.com/support)
[    16.332] Current version of pixman: 0.20.2
[    16.332] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    16.332] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    16.333] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 22 21:08:18 2011
[    16.334] (==) Using config file: "/etc/X11/xorg.conf"
[    16.335] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    16.348] (==) ServerLayout "X.org Configured"
[    16.348] (**) |-->Screen "Screen0" (0)
[    16.348] (**) |   |-->Monitor "Monitor0"
[    16.348] (**) |   |-->Device "Card0"
[    16.348] (**) |-->Screen "Screen1" (1)
[    16.348] (**) |   |-->Monitor "Monitor1"
[    16.348] (**) |   |-->Device "Card1"
[    16.348] (**) |-->Screen "Screen2" (2)
[    16.348] (**) |   |-->Monitor "Monitor2"
[    16.349] (**) |   |-->Device "Card2"
[    16.349] (**) |-->Input Device "Mouse0"
[    16.349] (**) |-->Input Device "Keyboard0"
[    16.349] (==) Automatically adding devices
[    16.349] (==) Automatically enabling devices
[    16.349] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    16.349] Entry deleted from font path.
[    16.349] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    16.349] Entry deleted from font path.
[    16.349] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    16.349] Entry deleted from font path.
[    16.349] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    16.349] Entry deleted from font path.
[    16.349] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    16.349] Entry deleted from font path.
[    16.349] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    16.349] Entry deleted from font path.
[    16.349] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    16.349] Entry deleted from font path.
[    16.349] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    16.349] Entry deleted from font path.
[    16.349] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    16.349] Entry deleted from font path.
[    16.349] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    16.349] Entry deleted from font path.
[    16.349] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[    16.349] (**) ModulePath set to "/usr/lib/xorg/modules"
[    16.349] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    16.349] (WW) Disabling Mouse0
[    16.349] (WW) Disabling Keyboard0
[    16.349] (II) Loader magic: 0x81ffde0
[    16.349] (II) Module ABI versions:
[    16.349] X.Org ANSI C Emulation: 0.4
[    16.349] X.Org Video Driver: 10.0
[    16.349] X.Org XInput driver : 12.3
[    16.349] X.Org Server Extension : 5.0
[    16.350] (--) PCI:*(0:0:2:0) 8086:2992:103c:2817 rev 2, Mem @ 0xf0400000/1048576, 0xe0000000/268435456, I/O @ 0x000021e0/8
[    16.350] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    16.350] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[    16.350] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[    16.350] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    16.350] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[    16.350] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[    16.350] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[    16.351] (II) LoadModule: "dbe"
[    16.351] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    16.351] (II) Module dbe: vendor="X.Org Foundation"
[    16.351] compiled for 1.10.1, module version = 1.0.0
[    16.351] Module class: X.Org Server Extension
[    16.351] ABI class: X.Org Server Extension, version 5.0
[    16.351] (II) Loading extension DOUBLE-BUFFER
[    16.351] (II) LoadModule: "glx"
[    16.351] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.351] (II) Module glx: vendor="X.Org Foundation"
[    16.351] compiled for 1.10.1, module version = 1.0.0
[    16.351] ABI class: X.Org Server Extension, version 5.0
[    16.351] (==) AIGLX enabled
[    16.351] (II) Loading extension GLX
[    16.351] (II) LoadModule: "dri"
[    16.352] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    16.352] (II) Module dri: vendor="X.Org Foundation"
[    16.352] compiled for 1.10.1, module version = 1.0.0
[    16.352] ABI class: X.Org Server Extension, version 5.0
[    16.352] (II) Loading extension XFree86-DRI
[    16.352] (II) LoadModule: "extmod"
[    16.352] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    16.352] (II) Module extmod: vendor="X.Org Foundation"
[    16.352] compiled for 1.10.1, module version = 1.0.0
[    16.352] Module class: X.Org Server Extension
[    16.352] ABI class: X.Org Server Extension, version 5.0
[    16.352] (II) Loading extension MIT-SCREEN-SAVER
[    16.352] (II) Loading extension XFree86-VidModeExtension
[    16.352] (II) Loading extension XFree86-DGA
[    16.352] (II) Loading extension DPMS
[    16.352] (II) Loading extension XVideo
[    16.352] (II) Loading extension XVideo-MotionCompensation
[    16.352] (II) Loading extension X-Resource
[    16.352] (II) LoadModule: "record"
[    16.352] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    16.352] (II) Module record: vendor="X.Org Foundation"
[    16.353] compiled for 1.10.1, module version = 1.13.0
[    16.353] Module class: X.Org Server Extension
[    16.353] ABI class: X.Org Server Extension, version 5.0
[    16.353] (II) Loading extension RECORD
[    16.353] (II) LoadModule: "dri2"
[    16.353] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    16.353] (II) Module dri2: vendor="X.Org Foundation"
[    16.353] compiled for 1.10.1, module version = 1.2.0
[    16.353] ABI class: X.Org Server Extension, version 5.0
[    16.353] (II) Loading extension DRI2
[    16.353] (II) LoadModule: "intel"
[    16.373] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    16.373] (II) Module intel: vendor="X.Org Foundation"
[    16.373] compiled for 1.10.1, module version = 2.14.0
[    16.373] Module class: X.Org Video Driver
[    16.373] ABI class: X.Org Video Driver, version 10.0
[    16.373] (II) LoadModule: "fbdev"
[    16.374] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    16.386] (II) Module fbdev: vendor="X.Org Foundation"
[    16.386] compiled for 1.10.0, module version = 0.4.2
[    16.386] ABI class: X.Org Video Driver, version 10.0
[    16.386] (II) LoadModule: "vesa"
[    16.386] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    16.391] (II) Module vesa: vendor="X.Org Foundation"
[    16.391] compiled for 1.10.0, module version = 2.3.0
[    16.391] Module class: X.Org Video Driver
[    16.391] ABI class: X.Org Video Driver, version 10.0
[    16.391] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[    16.391] (II) FBDEV: driver for framebuffer: fbdev
[    16.392] (II) VESA: driver for VESA chipsets: vesa
[    16.392] (++) using VT number 7

Offline t1m

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #23 Gepost op: 2011/05/22, 21:33:20 »
2e helft Xorg.0.log:

[    16.394] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    16.394] (WW) Falling back to old probe method for fbdev
[    16.394] (II) Loading sub module "fbdevhw"
[    16.394] (II) LoadModule: "fbdevhw"
[    16.394] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    16.411] (II) Module fbdevhw: vendor="X.Org Foundation"
[    16.411] compiled for 1.10.1, module version = 0.0.2
[    16.411] ABI class: X.Org Video Driver, version 10.0
[    16.411] (WW) Falling back to old probe method for vesa
[    16.411] drmOpenDevice: node name is /dev/dri/card0
[    16.411] drmOpenDevice: open result is 8, (OK)
[    16.411] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    16.411] drmOpenDevice: node name is /dev/dri/card0
[    16.411] drmOpenDevice: open result is 8, (OK)
[    16.411] drmOpenByBusid: drmOpenMinor returns 8
[    16.411] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    16.411] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    16.411] (==) intel(0): RGB weight 888
[    16.411] (==) intel(0): Default visual is TrueColor
[    16.411] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965Q
[    16.411] (--) intel(0): Chipset: "965Q"
[    16.412] (**) intel(0): Relaxed fencing enabled
[    16.412] (**) intel(0): Tiling enabled
[    16.412] (**) intel(0): SwapBuffers wait enabled
[    16.412] (==) intel(0): video overlay key set to 0x101fe
[    16.422] (II) intel(0): Output VGA1 using monitor section Monitor0
[    16.442] (II) intel(0): EDID for output VGA1
[    16.442] (II) intel(0): Printing probed modes for output VGA1
[    16.442] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    16.442] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    16.442] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    16.442] (II) intel(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz)
[    16.442] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz)
[    16.442] (II) intel(0): Output VGA1 connected
[    16.442] (II) intel(0): Using fuzzy aspect match for initial modes
[    16.442] (II) intel(0): Output VGA1 using initial mode 1024x768
[    16.442] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    16.442] (II) intel(0): Kernel page flipping support detected, enabling
[    16.442] (==) intel(0): DPI set to (96, 96)
[    16.442] (II) Loading sub module "fb"
[    16.442] (II) LoadModule: "fb"
[    16.443] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.443] (II) Module fb: vendor="X.Org Foundation"
[    16.443] compiled for 1.10.1, module version = 1.0.0
[    16.443] ABI class: X.Org ANSI C Emulation, version 0.4
[    16.443] (II) UnloadModule: "fbdev"
[    16.443] (II) Unloading fbdev
[    16.443] (II) UnloadModule: "fbdevhw"
[    16.443] (II) Unloading fbdevhw
[    16.443] (II) UnloadModule: "vesa"
[    16.443] (II) Unloading vesa
[    16.443] (==) Depth 24 pixmap format is 32 bpp
[    16.443] (==) intel(0): VideoRam: 262144 KB
[    16.444] (II) intel(0): [DRI2] Setup complete
[    16.444] (II) intel(0): [DRI2]   DRI driver: i965
[    16.444] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[    16.476] (II) UXA(0): Driver registered support for the following operations:
[    16.476] (II)         solid
[    16.476] (II)         copy
[    16.476] (II)         composite (RENDER acceleration)
[    16.476] (II)         put_image
[    16.476] (II)         get_image
[    16.476] (==) intel(0): Backing store disabled
[    16.476] (==) intel(0): Silken mouse enabled
[    16.476] (II) intel(0): Initializing HW Cursor
[    16.500] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    16.500] (==) intel(0): DPMS enabled
[    16.500] (==) intel(0): Intel XvMC decoder enabled
[    16.500] (II) intel(0): Set up textured video
[    16.500] (II) intel(0): Set up overlay video
[    16.500] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[    16.500] (II) intel(0): direct rendering: DRI2 Enabled
[    16.500] (==) intel(0): hotplug detection: "enabled"
[    16.500] (--) RandR disabled
[    16.501] (II) Initializing built-in extension Generic Event Extension
[    16.501] (II) Initializing built-in extension SHAPE
[    16.501] (II) Initializing built-in extension MIT-SHM
[    16.501] (II) Initializing built-in extension XInputExtension
[    16.501] (II) Initializing built-in extension XTEST
[    16.501] (II) Initializing built-in extension BIG-REQUESTS
[    16.501] (II) Initializing built-in extension SYNC
[    16.501] (II) Initializing built-in extension XKEYBOARD
[    16.501] (II) Initializing built-in extension XC-MISC
[    16.501] (II) Initializing built-in extension SECURITY
[    16.501] (II) Initializing built-in extension XINERAMA
[    16.501] (II) Initializing built-in extension XFIXES
[    16.501] (II) Initializing built-in extension RENDER
[    16.501] (II) Initializing built-in extension RANDR
[    16.501] (II) Initializing built-in extension COMPOSITE
[    16.501] (II) Initializing built-in extension DAMAGE
[    16.501] (II) Initializing built-in extension GESTURE
[    16.529] (II) AIGLX: Trying DRI driver /usr/lib/dri/i965_dri.so
[    16.553] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    16.553] (II) AIGLX: enabled GLX_INTEL_swap_event
[    16.553] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    16.553] (II) AIGLX: enabled GLX_SGI_make_current_read
[    16.553] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    16.553] (II) AIGLX: Loaded and initialized i965
[    16.553] (II) GLX: Initialized DRI2 GL provider for screen 0
[    16.554] (II) intel(0): Setting screen physical size to 270 x 203
[    16.578] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    16.592] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    16.592] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.592] (II) LoadModule: "evdev"
[    16.593] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.593] (II) Module evdev: vendor="X.Org Foundation"
[    16.593] compiled for 1.10.0.902, module version = 2.6.0
[    16.593] Module class: X.Org XInput Driver
[    16.593] ABI class: X.Org XInput driver, version 12.3
[    16.593] (II) Using input driver 'evdev' for 'Power Button'
[    16.593] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.593] (**) Power Button: always reports core events
[    16.593] (**) Power Button: Device: "/dev/input/event1"
[    16.613] (--) Power Button: Found keys
[    16.613] (II) Power Button: Configuring as keyboard
[    16.613] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    16.613] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    16.613] (**) Option "xkb_rules" "evdev"
[    16.613] (**) Option "xkb_model" "pc105"
[    16.613] (**) Option "xkb_layout" "us"
[    16.614] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    16.614] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    16.614] (II) Using input driver 'evdev' for 'Video Bus'
[    16.614] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.614] (**) Video Bus: always reports core events
[    16.614] (**) Video Bus: Device: "/dev/input/event4"
[    16.624] (--) Video Bus: Found keys
[    16.624] (II) Video Bus: Configuring as keyboard
[    16.624] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[    16.624] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    16.624] (**) Option "xkb_rules" "evdev"
[    16.624] (**) Option "xkb_model" "pc105"
[    16.624] (**) Option "xkb_layout" "us"
[    16.627] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    16.627] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.627] (II) Using input driver 'evdev' for 'Power Button'
[    16.627] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.628] (**) Power Button: always reports core events
[    16.628] (**) Power Button: Device: "/dev/input/event0"
[    16.644] (--) Power Button: Found keys
[    16.644] (II) Power Button: Configuring as keyboard
[    16.644] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    16.644] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    16.644] (**) Option "xkb_rules" "evdev"
[    16.644] (**) Option "xkb_model" "pc105"
[    16.644] (**) Option "xkb_layout" "us"
[    16.647] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3)
[    16.647] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[    16.647] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[    16.647] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.647] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[    16.647] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3"
[    16.660] (--) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[    16.660] (--) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[    16.660] (--) Logitech USB-PS/2 Optical Mouse: Found relative axes
[    16.660] (--) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[    16.660] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[    16.660] (II) Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[    16.660] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[    16.660] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    16.660] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3/event3"
[    16.660] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
[    16.660] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[    16.660] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[    16.660] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[    16.660] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[    16.660] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[    16.661] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[    16.661] (II) No input driver/identifier specified (ignoring)
[    16.671] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    16.671] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    16.671] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    16.671] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.671] (**) AT Translated Set 2 keyboard: always reports core events
[    16.672] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    16.684] (--) AT Translated Set 2 keyboard: Found keys
[    16.684] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    16.684] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    16.684] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    16.684] (**) Option "xkb_rules" "evdev"
[    16.684] (**) Option "xkb_model" "pc105"
[    16.684] (**) Option "xkb_layout" "us"
[    16.693] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5)
[    16.693] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    16.693] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    16.693] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.693] (**) HP WMI hotkeys: always reports core events
[    16.693] (**) HP WMI hotkeys: Device: "/dev/input/event5"
[    16.704] (--) HP WMI hotkeys: Found keys
[    16.704] (II) HP WMI hotkeys: Configuring as keyboard
[    16.704] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[    16.704] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[    16.704] (**) Option "xkb_rules" "evdev"
[    16.704] (**) Option "xkb_model" "pc105"
[    16.704] (**) Option "xkb_layout" "us"

Offline MauRice2

  • Lid
  • Steunpunt: Nee
Re: Scherm resolutie Ubuntu 11.04 Xorg
« Reactie #24 Gepost op: 2011/05/23, 20:58:52 »
T1m,

Heel vervelen is die log-bestand staat geen EEN regel over 1280x1024.
Wat betreft de HorizSync & VertRefresh waarden.
TFT schermen in tegenstelling CRT schermen hebben meestal de zelfde waarden als ik niet vergist. Of het nu een 15" of 22".
Uit een handleiding gevonden op het internet voor een "CTX S700BA": Horz: 30~80KHz, Vert: 59~75Hz.

De clou is om de communicatie tussen de VGA-kaart en Monitor uit te zetten, toch zeker wat betreft de resolutie.
Nu kan de regel Option "Ignore" maar twee waarden hebben "True" of "False".
Met "True" werkt het niet, ja kan nog "False" proberen.
Een van deze twee is ook de default waarde, maar ben er nog niet welke.
Citaat
Option Ignore bool
    This optional entry specifies that the monitor should be ignored entirely, and not reported through RandR. This is useful if the hardware reports the presence of outputs that don't exist. (RandR 1.2-supporting drivers only)

Wat je ook nog kan doen is de  DefaultDepth verlagen in de Sectie "Screen" van 24 naar 16.
Heeft met de kleuren weergave te maken. Dus van true-color naar hi-color verlagen.
MvG,
MauRice
Registered Linux user: 473556