Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: sambasamba samba.... ben het riedeltje even kwijt  (gelezen 2167 keer)

Offline ogbi

  • Lid
  • Steunpunt: Nee
sambasamba samba.... ben het riedeltje even kwijt
« Gepost op: 2011/04/17, 04:49:29 »
Dag mensen,
Samba geinstalleerd, mappen gedeeld, rechten in orde (denk ik...) alleen... Samba start niet automatisch op. Hoe krijg ik dat ook alweer voor elkaar...? Samba wordt niet in de Opstart-toepassingen vermeld, wel 'Uw bestanden delen'. Tevens worden de aanpassingen niet in de smb.config opgeslagen. Heb 'm zelf aangepast en opgeslagen:
Citaat van: smb.cnf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = workgroup

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
;   encrypt passwords = yes

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
;   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes
   security = user
   guest ok = yes
   guest account = ogbi
   username map = /etc/samba/smbusers

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home director as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = yes

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = no
;   share modes = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = yes
;   browseable = yes
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
;   guest ok = no
;   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
;   browseable = yes
;   read only = yes
;   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#   cdrom share is accesed. For this to work /etc/fstab must contain
#   an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#   is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

[Muziek]
   path = /home/ogbi/Muziek
   writeable = yes
;   browseable = yes
   guest ok = yes

[Video's]
   path = /home/ogbi/Video's
   writeable = yes
;   browseable = yes
   guest ok = yes

Vraag mij ook af of ik mijn account bij gastaccount in de server instellingen moet invoeren? Het enige wat moet is vrije toegang van de mediaspeler (eminent) in de 2 mappen op de pc. Dus geen login, account oid. De eminent vind de pc in ieder geval wel maar kan niet in een map komen.

Wat waren de stappen ook alweer  ???
Gewoon proberen

Offline MauRice2

  • Lid
  • Steunpunt: Nee
Re: sambasamba samba.... ben het riedeltje even kwijt
« Reactie #1 Gepost op: 2011/04/17, 20:29:56 »
Ogbi,

Een kei met samba ben ik ook niet...
Maar als het alleen lezen is, za; volgens mij ; browseable = yes niet als commentaar gezet worden.
Dus die ; weg. En de mappen op 0755 zetten.


« Laatst bewerkt op: 2011/04/17, 20:31:38 door MauRice2 »
MvG,
MauRice
Registered Linux user: 473556

Offline ogbi

  • Lid
  • Steunpunt: Nee
Re: sambasamba samba.... ben het riedeltje even kwijt
« Reactie #2 Gepost op: 2011/04/18, 00:38:43 »
mappen op 0755? en wat betekent de ; ?
Gewoon proberen

Offline MauRice2

  • Lid
  • Steunpunt: Nee
Re: sambasamba samba.... ben het riedeltje even kwijt
« Reactie #3 Gepost op: 2011/04/18, 19:44:33 »
mappen op 0755? en wat betekent de ; ?
Ogbi,

0755 is de permissie rechten van een map.
Beteken dat de eigenaar lees-, schrijf- & induiken rechten heeft.
De anderen alleen de lees- & induiken rechten.
Als je deze niet toeken, kan iemand anders ze niet lezen.

Elke regel dat begint met # of ; wordt als commentaar gezien en dus niet door de Samba-server geaccepteerd.

MvG,
MauRice
Registered Linux user: 473556

Offline ogbi

  • Lid
  • Steunpunt: Nee
Re: sambasamba samba.... ben het riedeltje even kwijt
« Reactie #4 Gepost op: 2011/04/20, 20:52:40 »
Aha, en waar voeg ik de 0755 toe?
Gewoon proberen

Offline MauRice2

  • Lid
  • Steunpunt: Nee
Re: sambasamba samba.... ben het riedeltje even kwijt
« Reactie #5 Gepost op: 2011/04/20, 21:43:31 »
Aha, en waar voeg ik de 0755 toe?
Ogbi,

Meestal staan deze wel goed.
Om te controleren, ik niet weet of het een server of je eigen PC met een grafische omgeving ben.
Vandaar voor de zekerheid de terminal opdrachten.
ls -l
Je krijgt een lijst van de mappen met extra info.
VB:
Citaat
drwxrwxr-x  3 maurizio maurizio 4096 2011-02-13 20:28 bin
drwx------  3 maurizio maurizio 4096 2010-10-31 14:03 Bricsys
drwxr-xr-x  5 maurizio maurizio 4096 2009-04-14 21:08 data
drwxr-xr-x  2 maurizio maurizio 4096 2011-04-12 18:31 Desktop
drwxrwxrwx 18 maurizio maurizio 4096 2011-04-09 11:43 Documents
drwxr-xr-x  4 maurizio maurizio 4096 2011-04-19 20:32 Downloads
drwxr-xr-x  2 maurizio maurizio 4096 2009-04-29 14:07 Music
drwxr-xr-x  5 maurizio maurizio 4096 2011-02-03 21:40 My Coating Data
drwxr-xr-x  4 maurizio maurizio 4096 2011-04-02 08:01 My Drawings
drwx------  2 maurizio maurizio 4096 2011-03-29 20:11 PDF
drwxrwxr-x  7 maurizio maurizio 4096 2009-06-17 19:08 Photos
drwxr-xr-x  5 maurizio maurizio 4096 2011-02-24 20:16 Pictures
drwxr-xr-x  2 maurizio maurizio 4096 2011-03-12 23:03 Public
drwxrwxr-x  2 maurizio maurizio 4096 2010-01-14 11:27 smb4k
drwxrwxr-x  5 maurizio maurizio 4096 2011-04-09 08:15 src
drwxr-xr-x  2 maurizio maurizio 4096 2009-04-29 14:07 Templates
drwx------  4 maurizio maurizio 4096 2011-04-17 16:57 tmp
drwxrwxr-x  3 maurizio maurizio 4096 2010-10-25 21:04 Ubuntu One
drwxr-xr-x  3 maurizio maurizio 4096 2011-01-21 20:48 Videos

Het gaat om de eerste kolom, die moet er zo uit zien drwxr-xr-x voor Video's en Muziek
Dat is in hex-code 0755.
Staat er iets anders, dan zijn de opdrachten:
chmod 0755 Video's

chmod 0755 Muziek

Mocht dat niet lukken, dan met root-rechten:
sudo chmod 0755 Video's

sudo chmod 0755 Muziek

De eerste keer zal het om je paswoord vragen.
MvG,
MauRice
Registered Linux user: 473556

Offline ogbi

  • Lid
  • Steunpunt: Nee
Re: sambasamba samba.... ben het riedeltje even kwijt
« Reactie #6 Gepost op: 2011/04/21, 01:17:21 »
euhm...

 ???

PC trouwens

Gewoon proberen

Offline ogbi

  • Lid
  • Steunpunt: Nee
Re: sambasamba samba.... ben het riedeltje even kwijt
« Reactie #7 Gepost op: 2011/04/21, 02:27:54 »
Ik heb mij eens flink ingelezen in de smb.conf en de hulp pagina's die bijgeleverd worden. Het is in het Engels allemaal dus heb ik mijn gezond verstand en intuitie aan de slag gezet. Na wat trial 'n error heb ik onderstaand conf bestand gemaakt en -meest belangrijk- kan ik vanaf de Eminent media speler in de aangemaakte gedeelde mappen!

Citaat

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = workgroup

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
   interfaces = eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = yes

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
;   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
   logon drive = H:
   logon home = \%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.
%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
;         SO_RCVBUF=8192 SO_SNDBUF=8192
;   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
   idmap uid = 10000-20000
   idmap gid = 10000-20000
   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
   winbind enum groups = yes
   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
   usershare max shares = 5

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes
   security = user
   guest ok = yes
   guest account = ogbi
   username map = /etc/samba/smbusers

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home director as \server\username
[homes]
   comment = Home Directories
   browseable = yes

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0775

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0775

# By default, \server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
   valid users = em7075

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
[netlogon]
   comment = Network Logon Service
   path = /home/samba/netlogon
   guest ok = yes
   read only = no
   share modes = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
[profiles]
   comment = Users profiles
   path = /home/samba/profiles
   guest ok = yes
   browseable = yes
   create mask = 0600
   directory mask = 0775

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0775

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
[cdrom]
   comment = Samba server's CD-ROM
   read only = yes
   locking = no
   path = /cdrom
   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#   cdrom share is accesed. For this to work /etc/fstab must contain
#   an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#   is mounted on /cdrom
#
   preexec = /bin/mount /cdrom
   postexec = /bin/umount /cdrom

[Muziek]
   path = /home/ogbi/Muziek
   comment = Gedeelde Muziek
   read only = No
   browseable = Yes
   guest ok = Yes

[Afbeeldingen]
   path = /home/ogbi/Afbeeldingen
   comment = Gedeelde Afbeeldingen
   read only = No
   browseable = Yes
   guest ok = Yes

[Video's]
   path = /home/ogbi/Video's
   comment = Gedeelde Video's
   read only = No
   browseable = Yes
   guest ok = Yes

Heb ik het zo veilig genoeg ingesteld? Tevens, de meldingen die ik in de conf maak overrulen de GUI aanpassingen, dat is correct? En, ja, veel makkelijker eigenlijk zolang je weet wat je doet en moet doen en vooral niet... Ik ga mij verder concentreen op commandline besturen van m'n linux pc'tje. Stond bijna op het punt weer te gaan hackintoshen maar wacht het nog even af  :rolleyes:
Gewoon proberen

Offline Mikkel

  • Lid
  • Steunpunt: Nee
Re: sambasamba samba.... ben het riedeltje even kwijt
« Reactie #8 Gepost op: 2011/04/21, 14:20:18 »
Na wat trial 'n error heb ik onderstaand conf bestand gemaakt .........

Citaat
#======================= Share Definitions =======================
# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0775

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0775

Heb ik het zo veilig genoeg ingesteld?

Volgens mij spreken de regels die ik hierboven vet heb gemaakt elkaar tegen. 'De groep' mag dus zowel bestanden als mappen lezen en schrijven (rw permissions), maar tegelijkertijd stel je in dat er alleen gelezen mag worden (read only = yes).
Als iedereen in de groep dus ook mag schrijven, dan zou het 'read only = no' moeten worden. ^-^ Toch?

Edit: de schermafdruk die je hebt gepost is trouwens totaal niet te lezen. ;) Dat zal wel komen doordat het nogal een groot venster is waarvan je die afdruk maakte. Wat je voortaan kunt doen is zo'n grote schermafdruk uploaden naar een site als ImageShack, TinyPic of imgur en de link die je daar dan krijgt hier in je bericht plakken.
« Laatst bewerkt op: 2011/04/21, 14:31:10 door Mikkel »

Offline ogbi

  • Lid
  • Steunpunt: Nee
Re: sambasamba samba.... ben het riedeltje even kwijt
« Reactie #9 Gepost op: 2011/04/21, 15:20:29 »
Yep, je hebt gelijk. Heb read only verandert. Wbt de schermafdruk, dacht dat hij zou 'pop-uppen'  :|

Nu wil het gegeven dat na herstart de server niet te vinden is. Oftewel samba start niet op? Hoe kan ik dat controleren en waar kan ik dat aanpassen?
Gewoon proberen

Offline MauRice2

  • Lid
  • Steunpunt: Nee
Re: sambasamba samba.... ben het riedeltje even kwijt
« Reactie #10 Gepost op: 2011/04/21, 20:05:06 »
Ogbi,


In een terminal:
Om te kijken of deze draai:
sudo service smbd status
Of
ps -Al | grep smbd

Als je de samba.conf heb gewijzigd:
sudo service smbd restart

Dan nog de start:
sudo service smbd start
En de stop:
sudo service smbd stop

MvG,
MauRice
Registered Linux user: 473556

Offline ogbi

  • Lid
  • Steunpunt: Nee
Re: sambasamba samba.... ben het riedeltje even kwijt
« Reactie #11 Gepost op: 2011/05/29, 01:25:51 »
Sorry dat het zo lang stil was, heb het inmiddels goed werkend. Draai nu alweer een paar weekjes Xubuntu tot mijn grote tevredenheid -op wat dingetjes na die ik als ex-OSX gebruiker echt mis- en ben tevreden met deze, in mijn ogen meest prettig werkende Ubuntu Distributie.
Gewoon proberen