@Jolo
Jammer, maar niet geschoten is altijd mis...
Maar wat betreft de problemen van TS. Het is al een paar jaar geleden volgens mij, maar ik heb gewoon geinstalleerd vanuit de firmware van linksys volgens de info in de README file van de firmware download, zie hieronder. Ik heb verder niets speciaals gedaan en het werkte ootb.
@TS
Heb je misschien al gelijk allerlei instellingen veranderd, misschien eens terugflashen naar de basis instelling/originele firmware en dan nog eens proberen?
Installing from Linksys' firmware
* Open the Linksys GUI in your browser. The default URL is
http://192.168.1.1/.
* Click the Administration tab, then Firmware Upgrade.
* Select and upload the correct firmware for your router.
* Wait for about 2 minutes while the firmware is uploaded & flashed.
Verder nog wat info over de "known problems", heb je daarnaar gekeken?
Known problems & quirks
* There is no help file.
* In some cases, you may need to reboot the router manually before the changes go into effect. If the changes involve switching wireless settings, you may need to reboot both ends.
* Not all wireless modes / security combinations work. For example, WET, Client and WDS will not work in WPA2.
* CIFS VFS timesout a lot. (or it might the server kicking the client off...)
* Graphs/SVG may not work with all browsers. Firefox: Use 1.5 or higher. Internet Explorer: Use Adobe SVG. Opera: Use 9.0 or higher. Safari: Use Safari 3 or newer.
* GUI settings are not saved by Opera if using IP address. The only work-around is to use the router's hostname (
http://hostname/) instead of an IP address (
http://192.168.0.1/). You can modify the hostname in Basic/Identification, or you can also edit your computer's /etc/hosts or C:\windows\system32\drivers\etc\hosts if you're not using the router's DNS forwarder.