Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: omnivision slide2pc  (gelezen 5189 keer)

Offline frans janssen

  • Lid
  • Steunpunt: Nee
omnivision slide2pc
« Gepost op: 2010/06/13, 14:29:59 »
ik heb een omnivision slide2pc gekocht  en heb geprobeerd deze aan de praat te krijgen in ubuntu.
weet iemand welke driver ik daarvoor moet hebben en/of ik de driver van windows cd ergens in kan copieren b.v. in /lib/firmware
dmesg zegt niets van de diascanner.
hopelijk kan mij iemand helpen bij voorbaat dank
frans janssen

Offline nomko

  • Lid
    • Ubuntu Linux Gebruiker Site
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #1 Gepost op: 2010/06/13, 14:37:19 »
ik heb een omnivision slide2pc gekocht  en heb geprobeerd deze aan de praat te krijgen in ubuntu.
weet iemand welke driver ik daarvoor moet hebben en/of ik de driver van windows cd ergens in kan copieren b.v. in /lib/firmware
dmesg zegt niets van de diascanner.
hopelijk kan mij iemand helpen bij voorbaat dank
frans janssen


Heb je een link waar de spec's staan van dat hebbedingetje??
Handige site voor de Ubuntu gebruiker:
https://sites.google.com/site/ubuntulinuxgebruiker
-------------------------
https://www.dropbox.com/referrals/NTQ4MzUwNDc5
-------------------------
Linux user number 515471
----------------------

Offline Gijsbert

  • Lid
  • Steunpunt: Ja
Re: omnivision slide2pc
« Reactie #2 Gepost op: 2010/06/13, 14:39:45 »
Welke versie van Ubuntu gebruik je?
Kan je een terminal openen(onder Hulpmiddelen) en daarin typen lsusb en de uitkomst hier plaatsen?
In der Beschränkung zeigt sich der Meister.

Offline Cumulus007

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #3 Gepost op: 2010/06/13, 14:41:49 »
Wat is het precies voor apparaat? De naam zegt me vrij weinig.

Offline frans janssen

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #4 Gepost op: 2010/06/13, 14:43:42 »
frans@AMD:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 006: ID 05a9:35e3 OmniVision Technologies, Inc.
Bus 002 Device 003: ID 057c:8401 AVM GmbH FRITZ!WLAN Stick N
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
frans@AMD:~$

de link is  http://www.4launch.nl/shop/product/061127/-filmscanner-slide2pc-?ref=googleadword&gclid=CMWK9ZKLnaICFQm7ZwodsB8Lyw

ik gebruik ubuntu 10.4

Offline frans janssen

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #5 Gepost op: 2010/06/13, 14:47:58 »
dit zijn de windows drivers van de cd
file:///home/frans/OV550/OV550_Bulk_v060303/AMCAP.EXE
file:///home/frans/OV550/OV550_Bulk_v060303/EXT2800.AX
file:///home/frans/OV550/OV550_Bulk_v060303/EXT2800.DLL
file:///home/frans/OV550/OV550_Bulk_v060303/OMCAMCAP.EXE
file:///home/frans/OV550/OV550_Bulk_v060303/OMCAMDIB.DLL
file:///home/frans/OV550/OV550_Bulk_v060303/OMNIUNS.EXE
file:///home/frans/OV550/OV550_Bulk_v060303/OV550.INF
file:///home/frans/OV550/OV550_Bulk_v060303/OVTUSB2.SYS
file:///home/frans/OV550/OV550_Bulk_v060303/OVTUSD2.DLL
file:///home/frans/OV550/OV550_Bulk_v060303/TWN2800.DS
file:///home/frans/OV550/OV550_Bulk_v060303/_apollo9657.set
file:///home/frans/OV550/OV550_Bulk_v060303/_ov531.sys
file:///home/frans/OV550/OV550_Bulk_v060303/apollo2630.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo2630_bk.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo2640YUV.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo3620.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo7640.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo7660.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo7660_bk.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo7670.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo7710.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo9650.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo9650_bk.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo9652.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo9652raw.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo9656.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo9657.set
file:///home/frans/OV550/OV550_Bulk_v060303/ov550b.sys
file:///home/frans/OV550/OV550_Bulk_v060303/ovtcam2.sys


file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0401.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0402.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0403.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0404.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0405.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0406.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0407.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0408.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0409.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x040a.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x040b.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x040c.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x040d.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x040e.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0410.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0411.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0412.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0413.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0414.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0415.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0416.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0418.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0419.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x041a.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x041b.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x041d.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x041e.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x041f.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0421.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0424.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x042d.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0804.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0816.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0c0c.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0c1a.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1025.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1026.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1027.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1028.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1029.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1030.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1031.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1032.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1033.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1034.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1035.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1036.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1037.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1038.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1040.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1041.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1042.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1043.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1044.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1045.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1046.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1048.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1049.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1050.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1051.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1053.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1054.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1055.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1057.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1060.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1069.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/2052.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/2070.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/3084.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/3098.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/35mm Film Scanner X64 .msi
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/Autorun.inf
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/Setup.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/System64
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/Windows
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/setup.exe

Offline Cumulus007

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #6 Gepost op: 2010/06/13, 15:09:42 »
Die lange lijst van bestanden had je wel achterwege kunnen laten ;)

Uitvoeren in terminal:
dmesg > logboek.txt

Plaats vervolgens de inhoud van logboek.txt op een website als pastebin.ubuntu.com en plaats de link naar de inhoud hier.
« Laatst bewerkt op: 2010/06/13, 15:12:00 door Cumulus007 »

Offline frans janssen

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #7 Gepost op: 2010/06/14, 20:05:24 »
sorry voor het lange bestand zal dit voortaan niet meer doen .
het is een apparaat om dias in te scannen en is van het merk OmniVision Technologies, Inc alleen staat het niet op de site
ik heb het gekocht bij de aldi.
het is ecact zo,n http://www.ionaudio.com/slides2pc  apparaat.
hoop dat iemand mij kan helpen
groetjes frans

Offline Gijsbert

  • Lid
  • Steunpunt: Ja
Re: omnivision slide2pc
« Reactie #8 Gepost op: 2010/06/14, 20:26:12 »
Heb je Sane( backend) en Xsane (frontend) al geïnstalleerd via Synaptic? En wordt de scanner hierin herkent?

Even voor lange tekst, boven het bericht wat je typt, staat een knop met # erop, als je daar op drukt krijg je de code tags dan ziet het er zo uit:

file:///home/frans/OV550/OV550_Bulk_v060303/AMCAP.EXE
file:///home/frans/OV550/OV550_Bulk_v060303/EXT2800.AX
file:///home/frans/OV550/OV550_Bulk_v060303/EXT2800.DLL
file:///home/frans/OV550/OV550_Bulk_v060303/OMCAMCAP.EXE
file:///home/frans/OV550/OV550_Bulk_v060303/OMCAMDIB.DLL
file:///home/frans/OV550/OV550_Bulk_v060303/OMNIUNS.EXE
file:///home/frans/OV550/OV550_Bulk_v060303/OV550.INF
file:///home/frans/OV550/OV550_Bulk_v060303/OVTUSB2.SYS
file:///home/frans/OV550/OV550_Bulk_v060303/OVTUSD2.DLL
file:///home/frans/OV550/OV550_Bulk_v060303/TWN2800.DS
file:///home/frans/OV550/OV550_Bulk_v060303/_apollo9657.set
file:///home/frans/OV550/OV550_Bulk_v060303/_ov531.sys
file:///home/frans/OV550/OV550_Bulk_v060303/apollo2630.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo2630_bk.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo2640YUV.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo3620.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo7640.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo7660.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo7660_bk.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo7670.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo7710.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo9650.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo9650_bk.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo9652.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo9652raw.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo9656.set
file:///home/frans/OV550/OV550_Bulk_v060303/apollo9657.set
file:///home/frans/OV550/OV550_Bulk_v060303/ov550b.sys
file:///home/frans/OV550/OV550_Bulk_v060303/ovtcam2.sys


file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0401.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0402.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0403.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0404.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0405.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0406.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0407.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0408.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0409.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x040a.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x040b.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x040c.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x040d.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x040e.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0410.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0411.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0412.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0413.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0414.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0415.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0416.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0418.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0419.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x041a.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x041b.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x041d.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x041e.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x041f.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0421.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0424.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x042d.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0804.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0816.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0c0c.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/0x0c1a.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1025.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1026.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1027.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1028.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1029.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1030.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1031.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1032.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1033.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1034.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1035.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1036.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1037.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1038.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1040.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1041.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1042.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1043.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1044.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1045.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1046.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1048.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1049.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1050.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1051.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1053.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1054.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1055.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1057.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1060.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/1069.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/2052.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/2070.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/3084.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/3098.mst
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/35mm Film Scanner X64 .msi
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/Autorun.inf
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/Setup.ini
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/System64
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/Windows
file:///home/frans/Slide2pc/driver/35mm Film Scanner x64/setup.exe
In der Beschränkung zeigt sich der Meister.

Offline frans janssen

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #9 Gepost op: 2010/06/14, 20:32:31 »
nee xsane en gimp kent geen scanner.
gr frans

Offline Gijsbert

  • Lid
  • Steunpunt: Ja
Re: omnivision slide2pc
« Reactie #10 Gepost op: 2010/06/14, 20:53:24 »
Even een probeersel. Installeer via Synaptic het programma scanbuttond. Voer vervolgens een voor een de commando's in de terminal, kopiëren en plakken werkt het makkelijkst:
scanbuttond -r 1000000
scanimage -L
scanimage -T -d plustek:libusb:002:002

Gebeurt er iets?
In der Beschränkung zeigt sich der Meister.

Offline frans janssen

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #11 Gepost op: 2010/06/14, 21:25:31 »
dit gebeurd er na wat U gezegt hebt.
frans@AMD:~$ scanbuttond -r 1000000
frans@AMD:~$ scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
frans@AMD:~$ scanimage -T -d plustek:libusb:002:002
scanimage: open of device plustek:libusb:002:002 failed: Error during device I/O

dus niet erg veel he
gr frans

Offline Gijsbert

  • Lid
  • Steunpunt: Ja
Re: omnivision slide2pc
« Reactie #12 Gepost op: 2010/06/14, 21:43:21 »
Jammer genoeg niet. Helaas is er weinig te vinden op internet over de scanner. Ik ga toch nog even op zoek naar iets "tastbaars" waar je wat aan hebt.
In der Beschränkung zeigt sich der Meister.

Offline frans janssen

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #13 Gepost op: 2010/06/14, 21:54:50 »
oke bij voorbaat dank
ik hoop dat je iets kunt vinden ik ben ook al 3 weken aan het zoeken.
gr frans

Offline frans janssen

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #14 Gepost op: 2010/06/14, 22:09:56 »
zou ik aan deze driver iets hebben   ov51x-jpeg driver

Offline Gijsbert

  • Lid
  • Steunpunt: Ja
Re: omnivision slide2pc
« Reactie #15 Gepost op: 2010/06/14, 22:28:43 »
Ik denk het niet, dit is een driver voor een webcam.
Ik heb nog wel het programma VueScan, volgens mij is de linux versie freeware, je kan ook de professionele versie kopen. Download hier de linux versie. http://www.bestsoftware4download.com/software/k-easy-use-t-free-vuescan-for-linux-download-pxgmvrpp.html  nu heb je een tgz bestand gedownload, ga naar de map waar je de tgz hebt gedownload, klik rechts op het bestand, kies uit het menu hier uitpakken, ga nu naar de map VueScan die in deze locatie is gemaakt, in de map staat een bestandje vuescan, klik hier op nu opent het programma vuscan wordt je scanner nu herkent?
In der Beschränkung zeigt sich der Meister.

Offline frans janssen

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #16 Gepost op: 2010/06/14, 22:52:34 »
vuescan heb ik geinstalleerd maar de scanner word niet herkent is trouwens wel een goed programma.
maar jammer dat mijn dia scanner niet herkent word

Offline Cumulus007

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #17 Gepost op: 2010/06/15, 07:21:25 »
Kun je nou nog even mijn commando uitvoeren? In een terminal dmesg > logboek.txt, het bestand logboek.txt in je Locaties -> Persoonlijke map vervolgens hier plaatsen.

Offline frans janssen

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #18 Gepost op: 2010/06/15, 20:13:27 »
/home/frans/logboek.txtdit is het logboektext

Offline frans janssen

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #19 Gepost op: 2010/06/15, 20:15:21 »
[   16.563488] registered panic notifier
[   16.563493] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[   16.564981] vga16fb: initializing
[   16.564984] vga16fb: mapped to 0xffff8800000a0000
[   16.564989] vga16fb: not registering due to another framebuffer present
[   16.572093] [drm] nouveau 0000:01:00.0: 0x107F: parsing clock script 0
[   16.572364] Console: switching to colour frame buffer device 160x64
[   16.576521] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   16.710016] tda829x 1-004b: setting tuner address to 61
[   16.840019] tda829x 1-004b: type set to tda8290+75a
[   17.120022] usb 2-4: firmware: requesting ar9170.fw
[   17.258638] type=1505 audit(1276624132.532:5):  operation="profile_replace" pid=935 name="/sbin/dhclient3"
[   17.258879] type=1505 audit(1276624132.532:6):  operation="profile_replace" pid=935 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   17.259015] type=1505 audit(1276624132.532:7):  operation="profile_replace" pid=935 name="/usr/lib/connman/scripts/dhclient-script"
[   17.261187] type=1505 audit(1276624132.542:8):  operation="profile_load" pid=937 name="/usr/bin/freshclam"
[   17.262522] type=1505 audit(1276624132.542:9):  operation="profile_load" pid=938 name="/usr/lib/cups/backend/cups-pdf"
[   17.262809] type=1505 audit(1276624132.542:10):  operation="profile_load" pid=938 name="/usr/sbin/cupsd"
[   17.264147] type=1505 audit(1276624132.542:11):  operation="profile_load" pid=939 name="/usr/sbin/mysqld-akonadi"
[   17.268027] r8169: eth0: link down
[   17.268567] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.380716] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.546819] ppdev: user-space parallel port driver
[   17.812838] ath: EEPROM regdomain: 0x8114
[   17.812842] ath: EEPROM indicates we should expect a country code
[   17.812844] ath: doing EEPROM country->regdmn map search
[   17.812845] ath: country maps to regdmn code: 0x37
[   17.812847] ath: Country alpha2 being used: DE
[   17.812849] ath: Regpair used: 0x37
[   17.813024] phy0: Selected rate control algorithm 'minstrel'
[   17.813703] cfg80211: Calling CRDA for country: DE
[   17.821312] Registered led device: ar9170-phy0::tx
[   17.821329] Registered led device: ar9170-phy0::assoc
[   17.821331] usb 2-4: Atheros AR9170 is registered as 'phy0'
[   17.821363] usbcore: registered new interface driver ar9170usb
[   17.823493] cfg80211: Current regulatory domain intersected:
[   17.823496] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   17.823499] (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   17.823501] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 1700 mBm)
[   17.823503] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   17.823505] (5490000 KHz - 5600000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   17.823506] (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   17.867689] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[   17.870965] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
[   19.107858] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   22.592472] input: i2c IR (HVR 1110) as /devices/virtual/input/input6
[   22.592527] ir-kbd-i2c: i2c IR (HVR 1110) detected at i2c-1/1-0071/ir0 [saa7133[0]]
[   22.740076] saa7133[0]: registered device video0 [v4l2]
[   22.740099] saa7133[0]: registered device vbi0
[   22.740120] saa7133[0]: registered device radio0
[   22.740232]   alloc irq_desc for 21 on node 0
[   22.740234]   alloc kstat_irqs on node 0
[   22.740241] C-Media PCI 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   22.744277] saa7134 ALSA driver for DMA sound loaded
[   22.744288] IRQ 20/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   22.744308] saa7133[0]/alsa: saa7133[0] at 0xfbfff800 irq 20 registered as card -2
[   22.803726] dvb_init() allocating 1 frontend
[   23.050079] DVB: registering new adapter (saa7133[0])
[   23.050083] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[   23.750017] tda1004x: setting up plls for 48MHz sampling clock
[   26.400007] tda1004x: timeout waiting for DSP ready
[   26.600009] tda1004x: found firmware revision 0 -- invalid
[   26.600012] tda1004x: trying to boot from eeprom
[   29.050005] tda1004x: timeout waiting for DSP ready
[   29.150005] tda1004x: found firmware revision 0 -- invalid
[   29.150007] tda1004x: waiting for firmware upload...
[   29.150011] saa7134 0000:03:06.0: firmware: requesting dvb-fe-tda10046.fw
[   29.151552] saa7134 0000:03:06.0: firmware: requesting dvb-fe-tda10045.fw
[   29.153226] tda1004x: no firmware upload (timeout or file not found?)
[   29.153229] tda1004x: firmware upload failed
[   32.721725] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[   47.971485] wlan0: deauthenticating from 00:24:fe:05:e5:db by local choice (reason=3)
[   47.971598] wlan0: direct probe to AP 00:24:fe:05:e5:db (try 1)
[   47.976483] wlan0: direct probe responded
[   47.976490] wlan0: authenticate with AP 00:24:fe:05:e5:db (try 1)
[   47.979464] wlan0: authenticated
[   47.979487] wlan0: associate with AP 00:24:fe:05:e5:db (try 1)
[   47.982199] wlan0: RX AssocResp from 00:24:fe:05:e5:db (capab=0x431 status=0 aid=1)
[   47.982203] wlan0: associated
[   47.983651] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   49.046376] Intel AES-NI instructions are not detected.
[   49.116489] padlock: VIA PadLock not detected.
[   57.302919] wlan1: deauthenticating from 00:24:fe:05:e5:db by local choice (reason=3)
[   57.303009] wlan1: direct probe to AP 00:24:fe:05:e5:db (try 1)
[   57.308909] wlan1: direct probe responded
[   57.308915] wlan1: authenticate with AP 00:24:fe:05:e5:db (try 1)
[   57.314372] wlan1: authenticated
[   57.314396] wlan1: associate with AP 00:24:fe:05:e5:db (try 1)
[   57.317605] wlan1: RX AssocResp from 00:24:fe:05:e5:db (capab=0x431 status=0 aid=2)
[   57.317609] wlan1: associated
[   57.323491] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   58.930015] wlan0: no IPv6 routers present
[   67.831272] wlan1: no IPv6 routers present
[  458.002343] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[  460.802560] wlan0: deauthenticating from 00:24:fe:05:e5:db by local choice (reason=3)
[  461.036664] wlan0: deauthenticating from 00:24:fe:05:e5:db by local choice (reason=3)
[  461.288264] wlan0: direct probe to AP 00:24:fe:05:e5:db (try 1)
[  461.294334] wlan0: direct probe responded
[  461.294337] wlan0: authenticate with AP 00:24:fe:05:e5:db (try 1)
[  461.297666] wlan0: authenticated
[  461.297688] wlan0: associate with AP 00:24:fe:05:e5:db (try 1)
[  461.300373] wlan0: RX AssocResp from 00:24:fe:05:e5:db (capab=0x431 status=0 aid=1)
[  461.300375] wlan0: associated
[  465.303832] wlan0: deauthenticating from 00:24:fe:05:e5:db by local choice (reason=3)
[  466.299577] wlan0: deauthenticating from 00:24:fe:05:e5:db by local choice (reason=3)
[  466.529757] wlan0: direct probe to AP 00:24:fe:05:e5:db (try 1)
[  466.534032] wlan0: direct probe responded
[  466.534040] wlan0: authenticate with AP 00:24:fe:05:e5:db (try 1)
[  466.537014] wlan0: authenticated
[  466.537039] wlan0: associate with AP 00:24:fe:05:e5:db (try 1)
[  466.539743] wlan0: RX AssocResp from 00:24:fe:05:e5:db (capab=0x431 status=0 aid=1)
[  466.539746] wlan0: associated
[  966.140017] __ratelimit: 3 callbacks suppressed
[  966.140023] dpkg[2430] general protection ip:7f2e9693a6fb sp:7fff7d585040 error:0 in libc-2.11.1.so[7f2e968bf000+178000]
[  966.144542] dpkg[2369] general protection ip:7f2e9693a6fb sp:7fff7d585000 error:0 in libc-2.11.1.so[7f2e968bf000+178000]
[  966.144574] dpkg[2432] general protection ip:7f2e9693a6fb sp:7fff7d5850b0 error:0 in libc-2.11.1.so[7f2e968bf000+178000]
[  976.331919] firefox-bin[2384] trap stack segment ip:7f0d5ebba520 sp:7fff383c40c0 error:0
[  980.500421] firefox-bin[2451] general protection ip:7f017fbeea52 sp:7fff27c446e0 error:0 in libgobject-2.0.so.0.2400.1[7f017fbd9000+45000]
[ 1011.260665] python[2473] trap stack segment ip:548774 sp:7fff969a6280 error:0
[ 1011.606082] python[2474] general protection ip:45d470 sp:7fffbd2ed5d8 error:0 in python2.6[400000+21c000]
[ 1012.019456] python[2475] general protection ip:4d5ce8 sp:7fff0d7ad990 error:0 in python2.6[400000+21c000]

Offline frans janssen

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #20 Gepost op: 2010/06/15, 22:12:15 »
ik heb voordat ik ubuntu heb geinstalleerd 13 jaar linux (Redhat ) fedora (core) op mijn systeem gehad
ook in fedora 11 en 12 en 13  werkte de dia scanner niet .
ook daar verschillende forums geprobeerd maar zonder succes wqnt ik kreeg heel weinig antwoorden op mijn vragen.
nu heb ik sinds de nieuwe Kubuntu 10 deze erop gezet en hoop dat ik hem nu aan de praat kan krijgen.
trouwens ubuntu bevalt me uitstekend is een ijzer sterk besturings systeem.
groetjes frans

Offline Cumulus007

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #21 Gepost op: 2010/06/16, 09:08:07 »
Je logboek is niet compleet, er mist een heel groot gedeelte.

Offline frans janssen

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #22 Gepost op: 2010/07/09, 22:18:21 »
ik zal morgenavond dmesg er nog eens opnieuw inzetten maar dan compleet
sorry voor het late antwoord maar ben ziek geweest.
groetjes frans

Offline frans janssen

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #23 Gepost op: 2010/07/17, 11:25:19 »
sorry het is wat later geworden maar hoop dat je me kunt helpen.
fransfrans@AMD:~$ dmesg | grep usb
[    0.683844] usbcore: registered new interface driver usbfs
[    0.683844] usbcore: registered new interface driver hub
[    0.683844] usbcore: registered new device driver usb
[    0.913542] usb usb1: configuration #1 chosen from 1 choice
[    0.933526] usb usb2: configuration #1 chosen from 1 choice
[    0.997526] usb usb3: configuration #1 chosen from 1 choice
[    1.057517] usb usb4: configuration #1 chosen from 1 choice
[    1.114086] usb usb5: configuration #1 chosen from 1 choice
[    1.174079] usb usb6: configuration #1 chosen from 1 choice
[    1.200020] usb 1-3: new high speed USB device using ehci_hcd and address 2
[    1.234085] usb usb7: configuration #1 chosen from 1 choice
[    1.352050] usb 1-3: configuration #1 chosen from 1 choice
[    1.530019] usb 2-4: new high speed USB device using ehci_hcd and address 2
[    1.703516] usb 2-4: configuration #1 chosen from 1 choice
[    1.710337] usb-storage: device found at 2
[    1.710340] usb-storage: waiting for device to settle before scanning
[    1.710347] usbcore: registered new interface driver usb-storage
[    2.030025] usb 4-1: new low speed USB device using ohci_hcd and address 2
[    2.222491] usb 4-1: configuration #1 chosen from 1 choice
[    2.235395] usbcore: registered new interface driver hiddev
[    2.239561] input: Wireless Mouse Wireless Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input4
[    2.239643] generic-usb 0003:05FE:0011.0001: input,hidraw0: USB HID v1.10 Mouse [Wireless Mouse Wireless Mouse] on usb-0000:00:12.1-1/input0
[    2.239661] usbcore: registered new interface driver usbhid
[    2.239663] usbhid: v2.6:USB HID core driver
[    6.716773] usb-storage: device scan complete
[   21.340027] usb 2-4: USB disconnect, address 2
[   22.630022] usb 2-4: new high speed USB device using ehci_hcd and address 3
[   22.803549] usb 2-4: configuration #1 chosen from 1 choice
[   22.940022] usb 2-4: reset high speed USB device using ehci_hcd and address 3
[   24.110026] usb 2-4: firmware: requesting ar9170.fw
[   24.553553] usb 2-4: Atheros AR9170 is registered as 'phy1'
[   24.553580] usbcore: registered new interface driver ar9170usb
[  510.350022] usb 2-5: new high speed USB device using ehci_hcd and address 4
[  510.501967] usb 2-5: configuration #1 chosen from 1 choice
frans@AMD:~$

Offline frans janssen

  • Lid
  • Steunpunt: Nee
Re: omnivision slide2pc
« Reactie #24 Gepost op: 2010/07/17, 11:49:09 »
de complete dmesg kan er niet op zelfs niet in 2 stappen zijn meer als 20000 tekens zegt hij
groetjes frans