Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Installatie Terratec DVB-T XXS [solved]  (gelezen 11534 keer)

Offline kenvanroose

  • Lid
  • Steunpunt: Nee
Installatie Terratec DVB-T XXS [solved]
« Gepost op: 2010/01/05, 11:54:01 »
Hallo,

Sinds een klein jaar ben ik langzaam maar zeker volledig aan het overschakelen van Windows naar Ubuntu. Op dit moment gebruik ik m'n windowspartitie nog enkel als 'reserve' als er iets mis is met Ubuntu, en om TV te kijken via m'n Terratec DVB usb-stick.

Ik heb de voorbije drie dagen talloze keren geprobeerd om het ding aan de praat te krijgen via de informatie die ik heb gevonden op een forum van linuxtv, maar het lukt gewoon niet. Het komt er op neer dat je via de terminal de firmware,... en een heleboel zaken moet downloaden om die dan te vervolledigen met 'make' en 'make install'. Vanaf 'make' beginnen de problemen: alles lijkt goed te gaan en na een minuut of drie komt er een 'fout',..

Ik zou dit ding heel graag kunnen gebruiken op mijn Ubuntu 9.10 (zo moet ik niet steeds inloggen in windows), maar voorlopig lukt't gewoon niet.. Ik ben een dummie op't gebied van het zelf compileren enz..., dus kan er mij iemand stap voor stap helpen?

thx,

Ken
« Laatst bewerkt op: 2010/01/05, 23:05:46 door kenvanroose »

Offline Cumulus007

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #1 Gepost op: 2010/01/05, 13:17:59 »
Hoi Ken,
zelf heb ik enige ervaring met tv-kaarten onder Linux, dus ik denk dat we er wel uitkomen. Is "Terratec DVB-T XXS" de volledige naam, hoort daar geen typenummer bij? Kun je de uitvoer van de commando's "lsusb" en "dmesg" hier posten?
« Laatst bewerkt op: 2010/01/05, 13:20:56 door Cumulus007 »

Offline kenvanroose

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #2 Gepost op: 2010/01/05, 17:48:53 »
Cumulus,

't gaat dus om een  Cinergy T USB XXS van het merk terratec.

De gevraagde outputs:
lsusb:
Bus 003 Device 003: ID 046d:c315 Logitech, Inc. Classic New Touch Keyboard
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0461:4d15 Primax Electronics, Ltd Dell Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 0ccd:00ab TerraTec Electronic GmbH
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Offline kenvanroose

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #3 Gepost op: 2010/01/05, 17:49:38 »
dmesg:

[    0.224163] system 00:08: ioport range 0x87f-0x87f has been reserved
[    0.224170] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[    0.224174] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.224178] system 00:09: iomem range 0xc0004800-0xc0004bff has been reserved
[    0.224181] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.256077] AppArmor: AppArmor Filesystem Enabled
[    0.256119] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.256123] pci 0000:00:01.0:   IO window: 0x9000-0x9fff
[    0.256128] pci 0000:00:01.0:   MEM window: 0xc0100000-0xc01fffff
[    0.256132] pci 0000:00:01.0:   PREFETCH window: 0x000000c8000000-0x000000cfffffff
[    0.256138] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
[    0.256141] pci 0000:00:05.0:   IO window: disabled
[    0.256144] pci 0000:00:05.0:   MEM window: disabled
[    0.256147] pci 0000:00:05.0:   PREFETCH window: disabled
[    0.256151] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
[    0.256154] pci 0000:00:06.0:   IO window: disabled
[    0.256158] pci 0000:00:06.0:   MEM window: 0xc0200000-0xc02fffff
[    0.256161] pci 0000:00:06.0:   PREFETCH window: disabled
[    0.256165] pci 0000:00:14.4: PCI bridge, secondary bus 0000:08
[    0.256168] pci 0000:00:14.4:   IO window: disabled
[    0.256175] pci 0000:00:14.4:   MEM window: 0xc0300000-0xc03fffff
[    0.256181] pci 0000:00:14.4:   PREFETCH window: disabled
[    0.256195] pci 0000:00:05.0: setting latency timer to 64
[    0.256202] pci 0000:00:06.0: setting latency timer to 64
[    0.256212] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.256215] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.256219] pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]
[    0.256222] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff]
[    0.256226] pci_bus 0000:01: resource 2 pref mem [0xc8000000-0xcfffffff]
[    0.256229] pci_bus 0000:02: resource 0 mem: [0x0-0xfff]
[    0.256232] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff]
[    0.256235] pci_bus 0000:05: resource 1 mem: [0xc0200000-0xc02fffff]
[    0.256239] pci_bus 0000:08: resource 1 mem: [0xc0300000-0xc03fffff]
[    0.256242] pci_bus 0000:08: resource 3 io:  [0x00-0xffff]
[    0.256245] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff]
[    0.256288] NET: Registered protocol family 2
[    0.256396] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.256778] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.257506] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.257849] TCP: Hash tables configured (established 131072 bind 65536)
[    0.257853] TCP reno registered
[    0.257960] NET: Registered protocol family 1
[    0.258042] Trying to unpack rootfs image as initramfs...
[    0.264028] Switched to high resolution mode on CPU 0
[    0.264058] Switched to high resolution mode on CPU 1
[    0.528351] Freeing initrd memory: 8174k freed
[    0.533954] cpufreq-nforce2: No nForce2 chipset.
[    0.533984] Scanning for low memory corruption every 60 seconds
[    0.534101] audit: initializing netlink socket (disabled)
[    0.534117] type=2000 audit(1262689104.533:1): initialized
[    0.544413] highmem bounce pool size: 64 pages
[    0.544420] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.546011] VFS: Disk quotas dquot_6.5.2
[    0.546077] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.546686] fuse init (API version 7.12)
[    0.546771] msgmni has been set to 1709
[    0.547083] alg: No test for stdrng (krng)
[    0.547100] io scheduler noop registered
[    0.547103] io scheduler anticipatory registered
[    0.547105] io scheduler deadline registered
[    0.547151] io scheduler cfq registered (default)
[    0.547161] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.547244] pci 0000:01:05.0: Boot video device
[    0.547407] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.547432] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.548514] ACPI: AC Adapter [ACAD] (on-line)
[    0.548577] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.548582] ACPI: Power Button [PWRF]
[    0.548638] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.548641] ACPI: Power Button [PWRB]
[    0.548711] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.548718] ACPI: Sleep Button [SLPB]
[    0.548763] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    0.549697] ACPI: Lid Switch [LID]
[    0.549934] ACPI: processor limited to max C-state 1
[    0.549975] processor LNXCPU:00: registered as cooling_device0
[    0.549981] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.550033] processor LNXCPU:01: registered as cooling_device1
[    0.555946] thermal LNXTHERM:01: registered as thermal_zone0
[    0.555957] ACPI: Thermal Zone [THRM] (27 C)
[    0.556013] isapnp: Scanning for PnP cards...
[    0.910229] isapnp: No Plug & Play device found
[    0.911471] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.912847] brd: module loaded
[    0.913376] loop: module loaded
[    0.913457] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.913538] ahci 0000:00:12.0: version 3.0
[    0.913555]   alloc irq_desc for 22 on node -1
[    0.913558]   alloc kstat_irqs on node -1
[    0.913566] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.913701] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    0.913706] ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    0.914238] scsi0 : ahci
[    0.914378] scsi1 : ahci
[    0.914455] scsi2 : ahci
[    0.914529] scsi3 : ahci
[    0.914639] ata1: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004100 irq 22
[    0.914644] ata2: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004180 irq 22
[    0.914649] ata3: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004200 irq 22
[    0.914654] ata4: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004280 irq 22
[    0.914997]   alloc irq_desc for 16 on node -1
[    0.914999]   alloc kstat_irqs on node -1
[    0.915005] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.915048] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    0.915135] scsi4 : pata_atiixp
[    0.915214] scsi5 : pata_atiixp
[    0.915991] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[    0.915994] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[    0.916903] Fixed MDIO Bus: probed
[    0.916941] PPP generic driver version 2.4.2
[    0.917085] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.917105]   alloc irq_desc for 19 on node -1
[    0.917108]   alloc kstat_irqs on node -1
[    0.917113] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.917132] ehci_hcd 0000:00:13.5: EHCI Host Controller
[    0.917201] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[    0.917232] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[    0.917254] ehci_hcd 0000:00:13.5: debug port 1
[    0.917274] ehci_hcd 0000:00:13.5: irq 19, io mem 0xc0004400
[    0.928050] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[    0.928145] usb usb1: configuration #1 chosen from 1 choice
[    0.928179] hub 1-0:1.0: USB hub found
[    0.928191] hub 1-0:1.0: 10 ports detected
[    0.928280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.928299] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.928309] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    0.928342] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    0.928366] ohci_hcd 0000:00:13.0: irq 16, io mem 0xc0005000
[    0.968180] ACPI: Battery Slot [BAT1] (battery present)
[    0.984133] usb usb2: configuration #1 chosen from 1 choice
[    0.984161] hub 2-0:1.0: USB hub found
[    0.984173] hub 2-0:1.0: 2 ports detected
[    0.984225]   alloc irq_desc for 17 on node -1
[    0.984228]   alloc kstat_irqs on node -1
[    0.984233] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.984243] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    0.984275] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    0.984300] ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000
[    1.040123] usb usb3: configuration #1 chosen from 1 choice
[    1.040151] hub 3-0:1.0: USB hub found
[    1.040162] hub 3-0:1.0: 2 ports detected
[    1.040214]   alloc irq_desc for 18 on node -1
[    1.040216]   alloc kstat_irqs on node -1
[    1.040221] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.040231] ohci_hcd 0000:00:13.2: OHCI Host Controller
[    1.040266] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[    1.040288] ohci_hcd 0000:00:13.2: irq 18, io mem 0xc0007000
[    1.080565] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GSA-T11N, A103, max UDMA/33
[    1.096126] usb usb4: configuration #1 chosen from 1 choice
[    1.096158] hub 4-0:1.0: USB hub found
[    1.096171] hub 4-0:1.0: 2 ports detected
[    1.096228] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.096239] ohci_hcd 0000:00:13.3: OHCI Host Controller
[    1.096278] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[    1.096300] ohci_hcd 0000:00:13.3: irq 17, io mem 0xc0008000
[    1.096564] ata5.00: configured for UDMA/33
[    1.152132] usb usb5: configuration #1 chosen from 1 choice
[    1.152174] hub 5-0:1.0: USB hub found
[    1.152184] hub 5-0:1.0: 2 ports detected
[    1.152235] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.152245] ohci_hcd 0000:00:13.4: OHCI Host Controller
[    1.152277] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[    1.152294] ohci_hcd 0000:00:13.4: irq 18, io mem 0xc0009000
[    1.208137] usb usb6: configuration #1 chosen from 1 choice
[    1.208166] hub 6-0:1.0: USB hub found
[    1.208177] hub 6-0:1.0: 2 ports detected
[    1.208234] uhci_hcd: USB Universal Host Controller Interface driver
[    1.208329] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.211171] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.211178] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.211256] mice: PS/2 mouse device common for all mice
[    1.211409] rtc_cmos 00:04: RTC can wake from S4
[    1.211451] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.211479] rtc0: alarms up to one month, 114 bytes nvram
[    1.211591] device-mapper: uevent: version 1.0.3
[    1.211713] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.211870] device-mapper: multipath: version 1.1.0 loaded
[    1.211873] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.212035] EISA: Probing bus 0 at eisa.0
[    1.212044] Cannot allocate resource for EISA slot 1
[    1.212072] Cannot allocate resource for EISA slot 8
[    1.212074] EISA: Detected 0 cards.
[    1.212269] cpuidle: using governor ladder
[    1.212271] cpuidle: using governor menu
[    1.212829] TCP cubic registered
[    1.212996] NET: Registered protocol family 10
[    1.213495] lo: Disabled Privacy Extensions
[    1.213848] NET: Registered protocol family 17
[    1.213867] Bluetooth: L2CAP ver 2.13
[    1.213869] Bluetooth: L2CAP socket layer initialized
[    1.213873] Bluetooth: SCO (Voice Link) ver 0.6
[    1.213875] Bluetooth: SCO socket layer initialized
[    1.213924] Bluetooth: RFCOMM TTY layer initialized
[    1.213927] Bluetooth: RFCOMM socket layer initialized
[    1.213930] Bluetooth: RFCOMM ver 1.11
[    1.213954] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-56 processors (2 cpu cores) (version 2.20.00)
[    1.214000] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x12
[    1.214003] powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x13
[    1.214006] powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x1e
[    1.214088] Using IPI No-Shortcut mode
[    1.214187] PM: Resume from disk failed.
[    1.214203] registered taskstats version 1
[    1.214355]   Magic number: 10:843:981
[    1.214466] rtc_cmos 00:04: setting system clock to 2010-01-05 10:58:26 UTC (1262689106)
[    1.214470] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.214472] EDD information not available.
[    1.232065] ata3: SATA link down (SStatus 0 SControl 300)
[    1.232100] ata4: SATA link down (SStatus 0 SControl 300)
[    1.232155] ata2: SATA link down (SStatus 0 SControl 300)
[    1.243703] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.396046] ata1: softreset failed (device not ready)
[    1.396050] ata1: applying SB600 PMP SRST workaround and retrying
[    1.504049] usb 2-1: new low speed USB device using ohci_hcd and address 2
[    1.560062] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.560956] ata1.00: ATA-7: ST980811AS, 3.CDD, max UDMA/133
[    1.560960] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.560980] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    1.562050] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    1.562054] ata1.00: configured for UDMA/133
[    1.576179] scsi 0:0:0:0: Direct-Access     ATA      ST980811AS       3.CD PQ: 0 ANSI: 5
[    1.576312] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.576387] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.576438] sd 0:0:0:0: [sda] Write Protect is off
[    1.576441] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

Offline kenvanroose

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #4 Gepost op: 2010/01/05, 17:49:56 »
(vervolg)

[    1.576466] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.576603]  sda:
[    1.580474] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GSA-T11N A103 PQ: 0 ANSI: 5
[    1.584053] sr0: scsi3-mmc drive: 31x/31x writer cd/rw xa/form2 cdda tray
[    1.584057] Uniform CD-ROM driver Revision: 3.20
[    1.584155] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.584197] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    1.601316]  sda1 sda2 sda3 sda4
[    1.619405] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.669151] usb 2-1: configuration #1 chosen from 1 choice
[    1.740130] Freeing unused kernel memory: 540k freed
[    1.740585] Write protecting the kernel text: 4568k
[    1.740632] Write protecting the kernel read-only data: 1836k
[    1.887789] Linux agpgart interface v0.103
[    1.963724] [drm] Initialized drm 1.1.0 20060810
[    1.969083] usb 3-1: new low speed USB device using ohci_hcd and address 2
[    2.024651] [drm] radeon default to kernel modesetting DISABLED.
[    2.024915] pci 0000:01:05.0: power state changed by ACPI to D0
[    2.024927] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.025118] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
[    2.030500] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.030510] b43-pci-bridge 0000:05:00.0: setting latency timer to 64
[    2.036518] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[    2.042022] acpi device:1e: registered as cooling_device2
[    2.042150] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1b/device:1c/input/input6
[    2.042194] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.044100] usbcore: registered new interface driver hiddev
[    2.048431] input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input7
[    2.048529] generic-usb 0003:0461:4D15.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:13.0-1/input0
[    2.048559] usbcore: registered new interface driver usbhid
[    2.048562] usbhid: v2.6:USB HID core driver
[    2.100113] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
[    2.135836]   alloc irq_desc for 21 on node -1
[    2.135841]   alloc kstat_irqs on node -1
[    2.135850] b44 0000:08:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.143173] usb 3-1: configuration #1 chosen from 1 choice
[    2.151424] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input8
[    2.151502] generic-usb 0003:046D:C315.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.1-1/input0
[    2.193119] ssb: Sonics Silicon Backplane found on PCI device 0000:08:00.0
[    2.193148] b44.c:v2.0
[    2.212878] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:19:b9:88:92:a4
[    4.182164] xor: automatically using best checksumming function: pIII_sse
[    4.200012]    pIII_sse  :  5453.000 MB/sec
[    4.200015] xor: using function: pIII_sse (5453.000 MB/sec)
[    4.203201] device-mapper: dm-raid45: initialized v0.2594b
[    4.563347] PM: Starting manual resume from disk
[    4.563353] PM: Resume from partition 8:3
[    4.563355] PM: Checking hibernation image.
[    4.563509] PM: Resume from disk failed.
[    4.634701] kjournald starting.  Commit interval 5 seconds
[    4.634732] EXT3-fs: mounted filesystem with writeback data mode.
[    6.028969] type=1505 audit(1262689111.310:2): operation="profile_load" pid=457 name=/usr/share/gdm/guest-session/Xsession
[    6.074759] type=1505 audit(1262689111.358:3): operation="profile_load" pid=458 name=/sbin/dhclient3
[    6.075089] type=1505 audit(1262689111.358:4): operation="profile_load" pid=458 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    6.075279] type=1505 audit(1262689111.358:5): operation="profile_load" pid=458 name=/usr/lib/connman/scripts/dhclient-script
[    6.175030] type=1505 audit(1262689111.458:6): operation="profile_load" pid=459 name=/usr/bin/evince
[    6.180493] type=1505 audit(1262689111.462:7): operation="profile_load" pid=459 name=/usr/bin/evince-previewer
[    6.183742] type=1505 audit(1262689111.466:8): operation="profile_load" pid=459 name=/usr/bin/evince-thumbnailer
[    6.225659] type=1505 audit(1262689111.510:9): operation="profile_load" pid=461 name=/usr/lib/cups/backend/cups-pdf
[    6.226066] type=1505 audit(1262689111.510:10): operation="profile_load" pid=461 name=/usr/sbin/cupsd
[    6.403622] type=1505 audit(1262689111.685:11): operation="profile_load" pid=462 name=/usr/sbin/mysqld
[    8.129751] Adding 498004k swap on /dev/sda3.  Priority:-1 extents:1 across:498004k
[    9.019814] EXT3 FS on sda2, internal journal
[   11.021100] udev: starting version 147
[   13.559163] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   13.658127] lp: driver loaded but no devices found
[   13.798404] input: Dell WMI hotkeys as /devices/virtual/input/input9
[   13.803031] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.806643] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   13.873656] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[   13.884481] ricoh-mmc: Ricoh MMC Controller disabling driver
[   13.884485] ricoh-mmc: Copyright(c) Philip Langdale
[   13.884527] ricoh-mmc: Ricoh MMC controller found at 0000:08:01.1 [1180:0843] (rev 1)
[   13.884537] ricoh-mmc: Main Ricoh function not found. Cannot disable controller.
[   13.999799] sdhci: Secure Digital Host Controller Interface driver
[   13.999803] sdhci: Copyright(c) Pierre Ossman
[   14.027460] sdhci-pci 0000:08:01.0: SDHCI controller found [1180:0822] (rev 19)
[   14.027484]   alloc irq_desc for 20 on node -1
[   14.027487]   alloc kstat_irqs on node -1
[   14.027495] sdhci-pci 0000:08:01.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[   14.029571] Registered led device: mmc0::
[   14.030627] mmc0: SDHCI controller on PCI [0000:08:01.0] using PIO
[   14.093109] cfg80211: Calling CRDA to update world regulatory domain
[   14.177956] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.655120] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000
[   14.693992] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[   15.139415] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[   15.402977] cfg80211: World regulatory domain updated:
[   15.402982]    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.402986]    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.402990]    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.402993]    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.402996]    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.403000]    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.543161] phy0: Selected rate control algorithm 'minstrel'
[   15.543977] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[   15.845445] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.117392] input: HDA ATI SB Mic at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   16.117484] input: HDA ATI SB HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[   17.451217] kjournald starting.  Commit interval 5 seconds
[   17.469297] EXT3 FS on sda4, internal journal
[   17.469306] EXT3-fs: mounted filesystem with writeback data mode.
[   21.424987] __ratelimit: 9 callbacks suppressed
[   21.424992] type=1505 audit(1262685526.706:15): operation="profile_replace" pid=993 name=/usr/share/gdm/guest-session/Xsession
[   21.427611] type=1505 audit(1262685526.710:16): operation="profile_replace" pid=994 name=/sbin/dhclient3
[   21.427946] type=1505 audit(1262685526.710:17): operation="profile_replace" pid=994 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   21.428180] type=1505 audit(1262685526.710:18): operation="profile_replace" pid=994 name=/usr/lib/connman/scripts/dhclient-script
[   21.433331] type=1505 audit(1262685526.718:19): operation="profile_replace" pid=995 name=/usr/bin/evince
[   21.438874] type=1505 audit(1262685526.722:20): operation="profile_replace" pid=995 name=/usr/bin/evince-previewer
[   21.442216] type=1505 audit(1262685526.726:21): operation="profile_replace" pid=995 name=/usr/bin/evince-thumbnailer
[   21.450544] type=1505 audit(1262685526.734:22): operation="profile_replace" pid=1000 name=/usr/lib/cups/backend/cups-pdf
[   21.450956] type=1505 audit(1262685526.734:23): operation="profile_replace" pid=1000 name=/usr/sbin/cupsd
[   21.634058] type=1505 audit(1262685526.917:24): operation="profile_replace" pid=1001 name=/usr/sbin/mysqld
[   28.247909] __ratelimit: 9 callbacks suppressed
[   28.247913] type=1503 audit(1262685533.533:28): operation="open" pid=1256 parent=1255 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   28.320071] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[   28.662575] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[   28.702800] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[   28.832153] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[   29.029062] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[   29.100652] Registered led device: b43-phy0::tx
[   29.100676] Registered led device: b43-phy0::rx
[   29.100698] Registered led device: b43-phy0::radio
[   29.132491] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   29.138017] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.731269] type=1503 audit(1262685535.013:29): operation="open" pid=1389 parent=1388 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   30.935431] type=1503 audit(1262685536.217:30): operation="open" pid=1512 parent=1511 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   31.162094] type=1503 audit(1262685536.445:31): operation="open" pid=1547 parent=1412 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   31.955722] type=1503 audit(1262685537.237:32): operation="open" pid=1602 parent=1601 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   32.974022] type=1503 audit(1262685538.257:33): operation="open" pid=1616 parent=1615 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   35.023057] type=1503 audit(1262685540.306:34): operation="open" pid=1634 parent=1633 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   35.051826] type=1503 audit(1262685540.334:35): operation="open" pid=1645 parent=1644 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   35.947921] [drm] Setting GART location based on new memory map
[   35.948961] [drm] Loading R300 Microcode
[   35.948983] [drm] Num pipes: 2
[   35.948990] [drm] writeback test succeeded in 1 usecs
[   47.326100] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   47.326106] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hwardware performance
[   47.326108] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[   47.326110] vboxdrv: the usage of hardware performance counters by
[   47.326112] vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
[   47.326117] vboxdrv: Found 2 processor cores.
[   47.326212] vboxdrv: fAsync=1 offMin=0x9f5e9 offMax=0x9f5e9
[   47.326283] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[   47.326285] vboxdrv: Successfully loaded version 3.0.8_OSE (interface 0x000e0000).
[   48.704560] ppdev: user-space parallel port driver
[  105.377333] wlan0: authenticate with AP 00:21:29:74:9e:46
[  105.378721] wlan0: authenticated
[  105.378727] wlan0: associate with AP 00:21:29:74:9e:46
[  105.380491] wlan0: RX AssocResp from 00:21:29:74:9e:46 (capab=0x471 status=0 aid=3)
[  105.380495] wlan0: associated
[  105.381459] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  114.760050] Clocksource tsc unstable (delta = -244725084 ns)
[  116.181042] wlan0: no IPv6 routers present
[  120.018550] UDF-fs: Partition marked readonly; forcing readonly mount
[  120.092587] UDF-fs INFO UDF: Mounting volume 'EXTRAS_NL_D1', timestamp 2006/07/25 13:11 (103c)
[ 4011.539083] wlan0: disassociating by local choice (reason=3)
[ 4011.581397] [drm] Num pipes: 2
[ 4011.665941] mtrr: MTRR 2 not used
[ 4012.310246] [drm] Setting GART location based on new memory map
[ 4012.312451] [drm] Loading R300 Microcode
[ 4012.312484] [drm] Num pipes: 2
[ 4012.312496] [drm] writeback test succeeded in 1 usecs
[ 4030.257582] wlan0: authenticate with AP 00:21:29:74:9e:46
[ 4030.260175] wlan0: authenticated
[ 4030.260181] wlan0: associate with AP 00:21:29:74:9e:46
[ 4030.266485] wlan0: RX AssocResp from 00:21:29:74:9e:46 (capab=0x471 status=0 aid=3)
[ 4030.266491] wlan0: associated
[ 4061.038244] wlan0: disassociating by local choice (reason=3)
[ 4072.575917] wlan0: authenticate with AP 00:21:29:74:9e:46
[ 4072.578566] wlan0: authenticated
[ 4072.578573] wlan0: associate with AP 00:21:29:74:9e:46
[ 4072.580467] wlan0: RX AssocResp from 00:21:29:74:9e:46 (capab=0x471 status=0 aid=3)
[ 4072.580475] wlan0: associated
[16081.416225] usb 3-1: USB disconnect, address 2
[16081.855178] usb 2-1: USB disconnect, address 2
[17369.561086] usb 2-1: new low speed USB device using ohci_hcd and address 3
[17369.728879] usb 2-1: configuration #1 chosen from 1 choice
[17369.737864] input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input13
[17369.738095] generic-usb 0003:0461:4D15.0003: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:13.0-1/input0
[17371.996086] usb 3-1: new low speed USB device using ohci_hcd and address 3
[17372.167094] usb 3-1: configuration #1 chosen from 1 choice
[17372.182390] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input14
[17372.182600] generic-usb 0003:046D:C315.0004: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.1-1/input0
[24270.876085] usb 1-7: new high speed USB device using ehci_hcd and address 5
[24271.009255] usb 1-7: configuration #1 chosen from 1 choice
ken@flaptop:~$

Offline Cumulus007

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #5 Gepost op: 2010/01/05, 18:09:36 »
En de adapter is nu aangesloten? Ik kan namelijk geen spoor van de adapter ontdekken in het log.
Betreft de pogingen om de drivers te installeren, zijn dat soms instructies van deze pagina:

http://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
« Laatst bewerkt op: 2010/01/05, 18:14:28 door Cumulus007 »

Offline kenvanroose

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #6 Gepost op: 2010/01/05, 18:39:13 »
Jipz,

Adapter is inderdaad aangesloten (dat zie je ook in de output van de eerste command, daar staat bij bus01 denk ik Terratec GMBH). De link die je geeft heb ik al 20 keer geprobeerd, geen idee wat ik verkeerd doe of wat er foutgaat..

K

Offline Joshua822

  • Documentatieteam
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #7 Gepost op: 2010/01/05, 18:43:59 »
17369.561086] usb 2-1: new low speed USB device using ohci_hcd and address 3
Hier zit volgens mij je probleem. Het systeem kan alleen de naam van de hardware uitlezen, maar weet volgens mij niet wat je er mee kunt doen.

Mijn kennis over TV kaarten, zowel in het algemeen als in Linux, is jammer genoeg echter nihil.


Offline Roc.am

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #8 Gepost op: 2010/01/05, 18:56:06 »
Ik heb hier verder geen verstand van maar misschien is dit een hulp:
http://kuparinen.org/martti/comp/ubuntu/en/terratecxxs.html  :P
Is je vraag opgelost? Markeer het als [OPGELOST] in de titel van je bericht!

Offline Cumulus007

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #9 Gepost op: 2010/01/05, 19:01:00 »
Ok, die link poste ik alleen maar om mijn vermoeden dat je die instructies hebt gebruikt, te bevestigen.

Ik heb de pagina http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_USB_XXS gevonden, waarop allerhande informatie staat over deze adapter in combinatie met V4L. V4L is overigens het gedeelte van Linux dat zich bezig houdt met video-apparatuur als tv-kaarten, DVB, camcorders, webcams, enzovoorts.

Volgens die pagina werkt jouw kaart gewoon zonder problemen sinds Linux kernel 2.6.32. Ubuntu 9.10 zit echter nog op 2.6.31. Waarschijnlijk werkt je kaart gelijk na het insteken op ubuntu 10.04, want daarin komt de nieuwere kernel. Totdat 10.04 uitkomt, kun je de drivers uit de nieuwere kernel gewoon binnenhalen en installeren. Dat gaat als volgt:

 * de broncode van V4L binnenhalen
 * de broncode compileren (omzetten naar voor de computer uitvoerbare programma's)
 * de gecompileerde drivers installeren
 * de drivers configureren
 * geschikte software zoeken om de kaart te gebruiken.


Ik neem aan dat je alle benodigde pakketten (build-essential en zo) al hebt binnengehaald, want die instructies staan immers al op die uitlegpagina op LinuxTV. Verwijder eerst even resten (bijvoorbeeld de map met de broncode erin) van vorige pogingen om de drivers te installeren, zodat je met een frisse start kunt beginnen.

1. Open een terminalvenster. Voer uit:
hg clone http://linuxtv.org/hg/v4l-dvb
.
dit commando zal de actuele broncode van V4L's DVB-tak binnenhalen. Dit duurt eventjes.

2. Ga de map binnen met
cd v4l/dvb

3. Voer uit:
make
.
Dit zal de aanwezige broncode compileren. Let op, heb je een processor met meerdere cores (bijvoorbeeld een dualcore), voeg dan de optie "-jN" toe aan make, waar N het aantal cores is plus één. Dat kan dus "make -j3" worden.

Stopt make met foutmeldingen? Plaats die dan hier, dan kunnen we ze oplossen.

4. Voer uit:
sudo make install
.
Dit zal de gecompileerde broncode op zijn plaats neerzetten. Dit vraagt om je wachtwoord.

5. Installeer nu de firmware (de machinecode die nodig is voor de kaart om op te starten en z'n werk te doen). Download dit bestand naar je Persoonlijke map. Plaats het vervolgens in /lib/firmware. Hiervoor heb je wel rootrechten nodig. Voorbeeld:
sudo cp dvb-usb-dib0700-1.20.fw /lib/firmware

6. Om de afstandsbediening werkend te krijgen, moet er een instellingen voor de driver gemaakt worden. Doe hiervoor:
sudo nano /etc/modprobe.d/dvb_usb_dib0700.conf
Nu opent een teksteditor het configuratiebestand voor de driver. Dit zal standaard leeg zijn. Zet hier neer:
options dvb_usb_dib0700_ir_proto=0
Druk op Ctrl+O op op te slaan en op Ctrl+X om te verlaten.

7. Herstart de computer. Controleer het systeemlogboek of de driver correct wordt geladen en er geen foutmeldingen ontstaan.

8. Gebruik het programma Kaffeine om op digitale zenders te scannen en te kijken.


TIP: is de ontvangst slecht, dan kun je proberen om de ruisonderdrukking te forceren. Voeg hiervoor de regel "options dvb_usb_dib0700force_lna_activation=1" toe aan de driverconfiguratie, zoals uitgelegd bij stap 6.


"
Resultaat digitale tv met Kaffeine:



NB: op het screenshot wordt een andere tv-kaart gebruikt, namelijk die van mijzelf ;)
« Laatst bewerkt op: 2010/01/05, 19:49:58 door Cumulus007 »

Offline kenvanroose

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #10 Gepost op: 2010/01/05, 19:45:00 »
ok,

ben dit dus aan het proberen maar tot nu toe nog geen beterschap. haal ik de broncode best binnen via mercury of gewoon tarballen? en: is er een command waarmee ik al mijn voorgaande pogingen kan uitwissen? als dit gebeurd is ga ik nog een keer proberen en dan geef ik het op. ik dacht dat je de fout gevonden had (ik heb een dualcore maar deed altijd gewoon 'make'). Klopt het overigens dat je daar een foutje hebt gemaakt en dat die 'make jN' bij dualcore 'make -j3' moet zijn ipv make -jN3?

ken

Offline Cumulus007

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #11 Gepost op: 2010/01/05, 19:52:09 »
Doe maar gewoon via Mercury. Zo heb je de allerlaatste versie, je weet maar nooit of de tarball well up-to-date is. Als je nog niets hebt geïnstalleerd (ik lees dat de vorige pogingen steeds fout liepen tijdens make), dan kun je gewoon de uitgepakte tarball van de vorige pogingen verwijderen. Oh ja, die N moet inderdaad weg ;)

Offline kenvanroose

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #12 Gepost op: 2010/01/05, 19:55:35 »
nog een keer geprobeerd, alweer close but no cigar. Hier de foutmelding:

 CC [M]  /home/ken/v4l-dvb/v4l/em28xx-vbi.o
  CC [M]  /home/ken/v4l-dvb/v4l/et61x251_core.o
  CC [M]  /home/ken/v4l-dvb/v4l/et61x251_tas5130d1b.o
  CC [M]  /home/ken/v4l-dvb/v4l/firedtv-avc.o
  CC [M]  /home/ken/v4l-dvb/v4l/firedtv-ci.o
/home/ken/v4l-dvb/v4l/et61x251_core.c: In function 'et61x251_ioctl_v4l2':
/home/ken/v4l-dvb/v4l/et61x251_core.c:2500: warning: the frame size of 1256 bytes is larger than 1024 bytes
  CC [M]  /home/ken/v4l-dvb/v4l/firedtv-dvb.o
  CC [M]  /home/ken/v4l-dvb/v4l/firedtv-fe.o
  CC [M]  /home/ken/v4l-dvb/v4l/firedtv-1394.o
/home/ken/v4l-dvb/v4l/firedtv-1394.c:21:17: error: dma.h: No such file or directory
/home/ken/v4l-dvb/v4l/firedtv-1394.c:22:21: error: csr1212.h: No such file or directory
/home/ken/v4l-dvb/v4l/firedtv-1394.c:23:23: error: highlevel.h: No such file or directory
/home/ken/v4l-dvb/v4l/firedtv-1394.c:24:19: error: hosts.h: No such file or directory
/home/ken/v4l-dvb/v4l/firedtv-1394.c:25:22: error: ieee1394.h: No such file or directory
/home/ken/v4l-dvb/v4l/firedtv-1394.c:26:17: error: iso.h: No such file or directory
/home/ken/v4l-dvb/v4l/firedtv-1394.c:27:21: error: nodemgr.h: No such file or directory
/home/ken/v4l-dvb/v4l/firedtv-1394.c:40: warning: 'struct hpsb_iso' declared inside parameter list
/home/ken/v4l-dvb/v4l/firedtv-1394.c:40: warning: its scope is only this definition or declaration, which is probably not what you want
/home/ken/v4l-dvb/v4l/firedtv-1394.c: In function 'rawiso_activity_cb':
/home/ken/v4l-dvb/v4l/firedtv-1394.c:56: error: dereferencing pointer to incomplete type
/home/ken/v4l-dvb/v4l/firedtv-1394.c:57: error: implicit declaration of function 'hpsb_iso_n_ready'
/home/ken/v4l-dvb/v4l/firedtv-1394.c:64: error: dereferencing pointer to incomplete type
/home/ken/v4l-dvb/v4l/firedtv-1394.c:65: error: implicit declaration of function 'dma_region_i'
/home/ken/v4l-dvb/v4l/firedtv-1394.c:65: error: dereferencing pointer to incomplete type
/home/ken/v4l-dvb/v4l/firedtv-1394.c:65: error: expected expression before 'unsigned'
/home/ken/v4l-dvb/v4l/firedtv-1394.c:66: warning: assignment makes pointer from integer without a cast
/home/ken/v4l-dvb/v4l/firedtv-1394.c:67: error: dereferencing pointer to incomplete type
/home/ken/v4l-dvb/v4l/firedtv-1394.c:71: error: dereferencing pointer to incomplete type
/home/ken/v4l-dvb/v4l/firedtv-1394.c:85: error: implicit declaration of function 'hpsb_iso_recv_release_packets'
/home/ken/v4l-dvb/v4l/firedtv-1394.c: In function 'node_of':
/home/ken/v4l-dvb/v4l/firedtv-1394.c:90: error: dereferencing pointer to incomplete type
/home/ken/v4l-dvb/v4l/firedtv-1394.c:90: warning: type defaults to 'int' in declaration of '__mptr'
/home/ken/v4l-dvb/v4l/firedtv-1394.c:90: warning: initialization from incompatible pointer type
/home/ken/v4l-dvb/v4l/firedtv-1394.c:90: error: invalid use of undefined type 'struct unit_directory'
/home/ken/v4l-dvb/v4l/firedtv-1394.c: In function 'node_lock':
/home/ken/v4l-dvb/v4l/firedtv-1394.c:97: error: implicit declaration of function 'hpsb_node_lock'
/home/ken/v4l-dvb/v4l/firedtv-1394.c:97: error: 'EXTCODE_COMPARE_SWAP' undeclared (first use in this function)
/home/ken/v4l-dvb/v4l/firedtv-1394.c:97: error: (Each undeclared identifier is reported only once
/home/ken/v4l-dvb/v4l/firedtv-1394.c:97: error: for each function it appears in.)
/home/ken/v4l-dvb/v4l/firedtv-1394.c:98: error: 'quadlet_t' undeclared (first use in this function)
/home/ken/v4l-dvb/v4l/firedtv-1394.c:98: error: expected expression before ')' token
/home/ken/v4l-dvb/v4l/firedtv-1394.c: In function 'node_read':
/home/ken/v4l-dvb/v4l/firedtv-1394.c:106: error: implicit declaration of function 'hpsb_node_read'
/home/ken/v4l-dvb/v4l/firedtv-1394.c: In function 'node_write':
/home/ken/v4l-dvb/v4l/firedtv-1394.c:111: error: implicit declaration of function 'hpsb_node_write'
/home/ken/v4l-dvb/v4l/firedtv-1394.c: In function 'start_iso':
/home/ken/v4l-dvb/v4l/firedtv-1394.c:122: error: implicit declaration of function 'hpsb_iso_recv_init'
/home/ken/v4l-dvb/v4l/firedtv-1394.c:122: error: dereferencing pointer to incomplete type
/home/ken/v4l-dvb/v4l/firedtv-1394.c:124: error: 'HPSB_ISO_DMA_DEFAULT' undeclared (first use in this function)
/home/ken/v4l-dvb/v4l/firedtv-1394.c:126: warning: assignment makes pointer from integer without a cast
/home/ken/v4l-dvb/v4l/firedtv-1394.c:133: error: implicit declaration of function 'hpsb_iso_recv_start'
/home/ken/v4l-dvb/v4l/firedtv-1394.c:136: error: implicit declaration of function 'hpsb_iso_shutdown'
/home/ken/v4l-dvb/v4l/firedtv-1394.c: In function 'stop_iso':
/home/ken/v4l-dvb/v4l/firedtv-1394.c:147: error: implicit declaration of function 'hpsb_iso_stop'
/home/ken/v4l-dvb/v4l/firedtv-1394.c: At top level:
/home/ken/v4l-dvb/v4l/firedtv-1394.c:162: warning: 'struct hpsb_host' declared inside parameter list
/home/ken/v4l-dvb/v4l/firedtv-1394.c: In function 'fcp_request':
/home/ken/v4l-dvb/v4l/firedtv-1394.c:175: error: dereferencing pointer to incomplete type
/home/ken/v4l-dvb/v4l/firedtv-1394.c:176: error: dereferencing pointer to incomplete type
/home/ken/v4l-dvb/v4l/firedtv-1394.c: In function 'node_probe':
/home/ken/v4l-dvb/v4l/firedtv-1394.c:190: error: dereferencing pointer to incomplete type
/home/ken/v4l-dvb/v4l/firedtv-1394.c:190: warning: type defaults to 'int' in declaration of '__mptr'
/home/ken/v4l-dvb/v4l/firedtv-1394.c:190: warning: initialization from incompatible pointer type
/home/ken/v4l-dvb/v4l/firedtv-1394.c:190: error: invalid use of undefined type 'struct unit_directory'
/home/ken/v4l-dvb/v4l/firedtv-1394.c:195: error: dereferencing pointer to incomplete type
/home/ken/v4l-dvb/v4l/firedtv-1394.c:195: error: 'quadlet_t' undeclared (first use in this function)
/home/ken/v4l-dvb/v4l/firedtv-1394.c:196: error: implicit declaration of function 'CSR1212_TEXTUAL_DESCRIPTOR_LEAF_DATA'
/home/ken/v4l-dvb/v4l/firedtv-1394.c:196: error: dereferencing pointer to incomplete type
/home/ken/v4l-dvb/v4l/firedtv-1394.c:196: warning: assignment makes pointer from integer without a cast
/home/ken/v4l-dvb/v4l/firedtv-1394.c: At top level:
/home/ken/v4l-dvb/v4l/firedtv-1394.c:252: warning: 'struct unit_directory' declared inside parameter list
/home/ken/v4l-dvb/v4l/firedtv-1394.c: In function 'node_update':
/home/ken/v4l-dvb/v4l/firedtv-1394.c:254: error: dereferencing pointer to incomplete type
/home/ken/v4l-dvb/v4l/firedtv-1394.c: At top level:
/home/ken/v4l-dvb/v4l/firedtv-1394.c:262: error: variable 'fdtv_driver' has initializer but incomplete type
/home/ken/v4l-dvb/v4l/firedtv-1394.c:263: error: unknown field 'name' specified in initializer
/home/ken/v4l-dvb/v4l/firedtv-1394.c:263: warning: excess elements in struct initializer
/home/ken/v4l-dvb/v4l/firedtv-1394.c:263: warning: (near initialization for 'fdtv_driver')
/home/ken/v4l-dvb/v4l/firedtv-1394.c:264: error: unknown field 'id_table' specified in initializer
/home/ken/v4l-dvb/v4l/firedtv-1394.c:264: warning: excess elements in struct initializer
/home/ken/v4l-dvb/v4l/firedtv-1394.c:264: warning: (near initialization for 'fdtv_driver')
/home/ken/v4l-dvb/v4l/firedtv-1394.c:265: error: unknown field 'update' specified in initializer
/home/ken/v4l-dvb/v4l/firedtv-1394.c:265: warning: excess elements in struct initializer
/home/ken/v4l-dvb/v4l/firedtv-1394.c:265: warning: (near initialization for 'fdtv_driver')
/home/ken/v4l-dvb/v4l/firedtv-1394.c:266: error: unknown field 'driver' specified in initializer
/home/ken/v4l-dvb/v4l/firedtv-1394.c:266: error: extra brace group at end of initializer
/home/ken/v4l-dvb/v4l/firedtv-1394.c:266: error: (near initialization for 'fdtv_driver')
/home/ken/v4l-dvb/v4l/firedtv-1394.c:269: warning: excess elements in struct initializer
/home/ken/v4l-dvb/v4l/firedtv-1394.c:269: warning: (near initialization for 'fdtv_driver')
/home/ken/v4l-dvb/v4l/firedtv-1394.c:272: error: variable 'fdtv_highlevel' has initializer but incomplete type
/home/ken/v4l-dvb/v4l/firedtv-1394.c:273: error: unknown field 'name' specified in initializer
/home/ken/v4l-dvb/v4l/firedtv-1394.c:273: warning: excess elements in struct initializer
/home/ken/v4l-dvb/v4l/firedtv-1394.c:273: warning: (near initialization for 'fdtv_highlevel')
/home/ken/v4l-dvb/v4l/firedtv-1394.c:274: error: unknown field 'fcp_request' specified in initializer
/home/ken/v4l-dvb/v4l/firedtv-1394.c:274: warning: excess elements in struct initializer
/home/ken/v4l-dvb/v4l/firedtv-1394.c:274: warning: (near initialization for 'fdtv_highlevel')
/home/ken/v4l-dvb/v4l/firedtv-1394.c: In function 'fdtv_1394_init':
/home/ken/v4l-dvb/v4l/firedtv-1394.c:281: error: implicit declaration of function 'hpsb_register_highlevel'
/home/ken/v4l-dvb/v4l/firedtv-1394.c:282: error: implicit declaration of function 'hpsb_register_protocol'
/home/ken/v4l-dvb/v4l/firedtv-1394.c:285: error: implicit declaration of function 'hpsb_unregister_highlevel'
/home/ken/v4l-dvb/v4l/firedtv-1394.c: In function 'fdtv_1394_exit':
/home/ken/v4l-dvb/v4l/firedtv-1394.c:292: error: implicit declaration of function 'hpsb_unregister_protocol'
make[3]: *** [/home/ken/v4l-dvb/v4l/firedtv-1394.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [_module_/home/ken/v4l-dvb/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-2.6.31-16-generic'
make[1]: *** [default] Fout 2
make[1]: Map '/home/ken/v4l-dvb/v4l' wordt verlaten
make: *** [all] Fout 2
ken@flaptop:~/v4l-dvb$

Offline Cumulus007

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #13 Gepost op: 2010/01/05, 19:59:46 »
Deze fout kwam ik ook tegen toen ik V4L ging compileren. Blijkbaar zit er een driver in, genaamd FiredTV, die niet wil compileren. Je kunt hem gelukkig uitschakelen:

nano v4l/.config
(ervan uitgaande dat je in v4l-dvb/ zit)
 
voeg de regel "CONFIG_DVB_FIREDTV=n" toe aan dit bestand, probeer daarna weer "make". Dit zal het compileren van FiredTV uitschakelen. FiredTV heb je toch niet nodig, want het is een driver voor videokaarten over FireWire, dat gebruik je toch niet ;)

Offline kenvanroose

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #14 Gepost op: 2010/01/05, 20:41:21 »
Ja, geïnstalleerd is ie eindelijk ;), nu nog even zien hoe dat allemaal werkt, op dit moment scant ie maar vindt ie niks...

Offline Cumulus007

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #15 Gepost op: 2010/01/05, 20:43:29 »
Ja, geïnstalleerd is ie eindelijk ;), nu nog even zien hoe dat allemaal werkt, op dit moment scant ie maar vindt ie niks...
Mooi :) Ben je nu bezig met Kaffeine?

Offline kenvanroose

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #16 Gepost op: 2010/01/05, 21:12:46 »
Hoera!

Hartelijk dank voor de hulp, ik vraag me dikwijls af waar jullie het halen, maar het werkt dus, de zenders worden gescand,... én ik kan kijken. ik moet nu enkel nog een programma vinden dat niet crashgevoelig is. zit op GNOME en kaffeine wil niet. MeTV werkt wel, maar is een beetje stroef in behandeling, ik vind misschien nog wel iets beters.

Maar in elk geval merci, je hebt me nog een reden minder gegeven om in te loggen op windows

Ken

Offline Cumulus007

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #17 Gepost op: 2010/01/05, 21:24:43 »
Kaffeine wil wel eens wegvallen als het signaal slecht wordt of als je te snel tussen zenders wisselt. Werkt de afstandsbediening overigens?

Hoe ik eraan kom? Puur ervaring, en heel, heel veel googlen :D

Succes met je tv-kaart!

Offline kenvanroose

  • Lid
  • Steunpunt: Nee
Re: Installatie Terratec DVB-T XXS
« Reactie #18 Gepost op: 2010/01/05, 23:04:49 »
ja, googlen, dat heb ik wel geleerd sinds ik met ubuntu werk ;), maar had dit echt nergens gevonden. kaffeine crasht vanaf ik een zender open, begint nog niet te spelen zelfs... MeTv werkt, maar zappen is stroef en naar kanaal x kijken terwijl je kanaal y opneemt, gaat niet. ik zoek nog een betere player, komt wel in orde ;)