ik doe nog 1 x de dmesg want had vergeten de afteck stick erin te doen.
[ 0.261232] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[ 0.261236] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[ 0.261821] Fixed MDIO Bus: probed
[ 0.261872] PPP generic driver version 2.4.2
[ 0.261947] tun: Universal TUN/TAP device driver, 1.6
[ 0.261950] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.262059] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.262086] alloc irq_desc for 23 on node -1
[ 0.262089] alloc kstat_irqs on node -1
[ 0.262099] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.262119] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.262124] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.264978] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.265005] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.265019] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.268898] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.316353] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0444000
[ 0.336541] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.336718] usb usb1: configuration #1 chosen from 1 choice
[ 0.336762] hub 1-0:1.0: USB hub found
[ 0.336777] hub 1-0:1.0: 8 ports detected
[ 0.336873] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.336896] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.336963] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.336974] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.336979] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.337027] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.337064] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 0.337185] usb usb2: configuration #1 chosen from 1 choice
[ 0.337219] hub 2-0:1.0: USB hub found
[ 0.337282] hub 2-0:1.0: 2 ports detected
[ 0.337385] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.337393] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.337398] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.337435] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.337478] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 0.337584] usb usb3: configuration #1 chosen from 1 choice
[ 0.337616] hub 3-0:1.0: USB hub found
[ 0.337624] hub 3-0:1.0: 2 ports detected
[ 0.337677] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.337686] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.337690] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.337726] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.337764] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.337879] usb usb4: configuration #1 chosen from 1 choice
[ 0.337911] hub 4-0:1.0: USB hub found
[ 0.337919] hub 4-0:1.0: 2 ports detected
[ 0.337980] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.337987] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.337992] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.338033] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.338071] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 0.338176] usb usb5: configuration #1 chosen from 1 choice
[ 0.338210] hub 5-0:1.0: USB hub found
[ 0.338219] hub 5-0:1.0: 2 ports detected
[ 0.338341] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.338686] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.338774] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.338784] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.338833] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.338861] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.338887] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.339116] mice: PS/2 mouse device common for all mice
[ 0.339286] rtc_cmos 00:08: RTC can wake from S4
[ 0.339339] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.339376] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.339517] device-mapper: uevent: version 1.0.3
[ 0.340895] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.342823] device-mapper: multipath: version 1.1.0 loaded
[ 0.342828] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.343522] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.344495] EISA: Probing bus 0 at eisa.0
[ 0.344505] Cannot allocate resource for EISA slot 1
[ 0.344509] Cannot allocate resource for EISA slot 2
[ 0.344511] Cannot allocate resource for EISA slot 3
[ 0.344514] Cannot allocate resource for EISA slot 4
[ 0.344517] Cannot allocate resource for EISA slot 5
[ 0.344520] Cannot allocate resource for EISA slot 6
[ 0.344595] EISA: Detected 0 cards.
[ 0.347335] cpuidle: using governor ladder
[ 0.347408] cpuidle: using governor menu
[ 0.348059] TCP cubic registered
[ 0.348367] NET: Registered protocol family 10
[ 0.348912] lo: Disabled Privacy Extensions
[ 0.349280] NET: Registered protocol family 17
[ 0.349343] Using IPI No-Shortcut mode
[ 0.349466] PM: Resume from disk failed.
[ 0.349482] registered taskstats version 1
[ 0.349962] Magic number: 2:369:77
[ 0.350100] rtc_cmos 00:08: setting system clock to 2010-07-21 12:03:33 UTC (1279713813)
[ 0.350105] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.350107] EDD information not available.
[ 0.444691] ata1.00: ATA-6: TOSHIBA MK8032GAX, AD001A, max UDMA/100
[ 0.444697] ata1.00: 156301488 sectors, multi 16: LBA48
[ 0.444849] ata1.01: ATAPI: PHILIPS DVD-RAM SDVD8821, EX02, max UDMA/33
[ 0.453139] ata1.00: configured for UDMA/100
[ 0.467840] ACPI: Battery Slot [BAT0] (battery present)
[ 0.468449] ata1.01: configured for UDMA/33
[ 0.695786] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 0.808138] Freeing initrd memory: 7778k freed
[ 0.900676] isapnp: No Plug & Play device found
[ 0.900872] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8032GA AD00 PQ: 0 ANSI: 5
[ 0.901095] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.902511] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 0.902575] sd 0:0:0:0: [sda] Write Protect is off
[ 0.902578] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.902610] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.902713] scsi 0:0:1:0: CD-ROM PHILIPS DVD-RAM SDVD8821 EX02 PQ: 0 ANSI: 5
[ 0.905652] sda:
[ 0.920898] usb 1-1: configuration #1 chosen from 1 choice
[ 0.935872] sda1 sda2 < sda5 sda6 sda7 >
[ 0.966817] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.966822] Uniform CD-ROM driver Revision: 3.20
[ 0.966914] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 0.966973] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 0.967144] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.967162] Freeing unused kernel memory: 660k freed
[ 0.967594] Write protecting the kernel text: 4680k
[ 0.967637] Write protecting the kernel read-only data: 1840k
[ 0.990059] udev: starting version 151
[ 1.144108] usb 1-7: new high speed USB device using ehci_hcd and address 4
[ 1.284337] usb 1-7: configuration #1 chosen from 1 choice
[ 1.287693] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.287724] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.287784] r8169 0000:02:00.0: setting latency timer to 64
[ 1.287864] alloc irq_desc for 284 on node -1
[ 1.287867] alloc kstat_irqs on node -1
[ 1.287886] r8169 0000:02:00.0: irq 284 for MSI/MSI-X
[ 1.296682] eth0: RTL8168b/8111b at 0xf8074000, 00:16:d3:4e:36:f4, XID 18000000 IRQ 284
[ 1.330992] alloc irq_desc for 20 on node -1
[ 1.330997] alloc kstat_irqs on node -1
[ 1.331007] b43-pci-bridge 0000:0a:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.338147] usbcore: registered new interface driver hiddev
[ 1.341069] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
[ 1.341473] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.1/input/input5
[ 1.341684] generic-usb 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-1/input1
[ 1.341723] usbcore: registered new interface driver usbhid
[ 1.341844] usbhid: v2.6:USB HID core driver
[ 1.388113] ssb: Sonics Silicon Backplane found on PCI device 0000:0a:05.0
[ 1.524052] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 1.650590] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 1.650596] EXT4-fs (sda1): write access will be enabled during recovery
[ 1.703958] usb 4-2: configuration #1 chosen from 1 choice
[ 1.711460] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input6
[ 1.711952] generic-usb 0003:046D:C52F.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
[ 1.716979] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input7
[ 1.717143] generic-usb 0003:046D:C52F.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
[ 2.034486] EXT4-fs (sda1): recovery complete
[ 2.035617] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 17.456932] udev: starting version 151
[ 17.529851] Adding 999416k swap on /dev/sda6. Priority:-1 extents:1 across:999416k
[ 17.604365] lp: driver loaded but no devices found
[ 17.923879] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 17.923957] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 17.931581] Linux agpgart interface v0.103
[ 17.984559] intel_rng: FWH not detected
[ 18.082591] sdhci: Secure Digital Host Controller Interface driver
[ 18.082595] sdhci: Copyright(c) Pierre Ossman
[ 18.082733] Linux video capture interface: v2.00
[ 18.165947] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 18.166218] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 18.205385] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 18.223789] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 18.374397] sdhci-pci 0000:0a:06.3: SDHCI controller found [104c:803c] (rev 0)
[ 18.374423] sdhci-pci 0000:0a:06.3: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 18.375205] Registered led device: mmc0::
[ 18.375325] mmc0: SDHCI controller on PCI [0000:0a:06.3] using PIO
[ 18.376109] [drm] Initialized drm 1.1.0 20060810
[ 18.403924] type=1505 audit(1279713831.549:2): operation="profile_load" pid=639 name="/sbin/dhclient3"
[ 18.404745] type=1505 audit(1279713831.553:3): operation="profile_load" pid=639 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 18.405168] type=1505 audit(1279713831.553:4): operation="profile_load" pid=639 name="/usr/lib/connman/scripts/dhclient-script"
[ 18.423065] cfg80211: Calling CRDA to update world regulatory domain
[ 18.440351] gspca: main v2.7.0 registered
[ 18.475569] tifm_7xx1 0000:0a:06.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 18.502655] cfg80211: World regulatory domain updated:
[ 18.502660] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.502664] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.502668] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.502672] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.502675] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.502679] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.546042] gspca: probing 0402:5602
[ 18.546049] ALi m5602: Probing for a po1030 sensor
[ 18.546157] yenta_cardbus 0000:0a:06.0: CardBus bridge found [1025:0107]
[ 18.546185] yenta_cardbus 0000:0a:06.0: Using CSCINT to route CSC interrupts to PCI
[ 18.546188] yenta_cardbus 0000:0a:06.0: Routing CardBus interrupts to PCI
[ 18.546195] yenta_cardbus 0000:0a:06.0: TI: mfunc 0x01aa1b22, devctl 0x64
[ 18.567175] ALi m5602: Probing for a mt9m111 sensor
[ 18.603606] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.603614] i915 0000:00:02.0: setting latency timer to 64
[ 18.609962] [drm] set up 7M of stolen space
[ 18.713318] ALi m5602: Probing for a s5k4aa sensor
[ 18.723471] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[ 18.768556] ALi m5602: Probing for an ov9650 sensor
[ 18.796180] af9015: tuner id:179 not supported, please report!
[ 18.796247] usbcore: registered new interface driver dvb_usb_af9015
[ 18.825307] ALi m5602: Sensor reported 0xffff
[ 18.825314] ALi m5602: Probing for a s5k83a sensor
[ 18.842773] yenta_cardbus 0000:0a:06.0: ISA IRQ mask 0x0cf8, PCI irq 22
[ 18.842779] yenta_cardbus 0000:0a:06.0: Socket status: 30000006
[ 18.842785] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0a to #0e
[ 18.842796] yenta_cardbus 0000:0a:06.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[ 18.842802] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x6000-0x6fff: clean.
[ 18.843075] yenta_cardbus 0000:0a:06.0: pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd00fffff
[ 18.843080] yenta_cardbus 0000:0a:06.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[ 18.844475] phy0: Selected rate control algorithm 'minstrel'
[ 18.845343] Registered led device: b43-phy0::tx
[ 18.845368] Registered led device: b43-phy0::rx
[ 18.845389] Registered led device: b43-phy0::radio
[ 18.845487] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[ 18.863802] ALi m5602: Detected a s5k83a sensor
[ 18.874123] [drm] initialized overlay support
[ 19.349427] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 19.364256] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 19.398888] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 19.400905] gspca: probe ok
[ 19.400936] usbcore: registered new interface driver ALi m5602
[ 19.400943] ALi m5602: registered
[ 19.664343] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 19.666404] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 19.667270] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 19.667989] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 19.668919] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 19.680292] fb0: inteldrmfb frame buffer device
[ 19.680296] registered panic notifier
[ 19.680308] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 19.680783] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 19.680828] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 19.680840] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 19.680868] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 19.687765] vga16fb: initializing
[ 19.687772] vga16fb: mapped to 0xc00a0000
[ 19.687778] vga16fb: not registering due to another framebuffer present
[ 19.901589] hda_codec: ALC883: BIOS auto-probing.
[ 19.902586] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 19.968690] Console: switching to colour frame buffer device 180x56
[ 20.533986] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 21.161054] type=1505 audit(1279713834.309:5): operation="profile_replace" pid=830 name="/sbin/dhclient3"
[ 21.161849] type=1505 audit(1279713834.309:6): operation="profile_replace" pid=830 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 21.162281] type=1505 audit(1279713834.309:7): operation="profile_replace" pid=830 name="/usr/lib/connman/scripts/dhclient-script"
[ 21.166231] type=1505 audit(1279713834.313:8): operation="profile_load" pid=832 name="/usr/lib/cups/backend/cups-pdf"
[ 21.167177] type=1505 audit(1279713834.313:9): operation="profile_load" pid=832 name="/usr/sbin/cupsd"
[ 21.170200] type=1505 audit(1279713834.317:10): operation="profile_load" pid=833 name="/usr/sbin/mysqld-akonadi"
[ 21.172630] type=1505 audit(1279713834.321:11): operation="profile_load" pid=834 name="/usr/sbin/tcpdump"
[ 22.020083] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 22.061078] ppdev: user-space parallel port driver
[ 22.161539] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 22.178619] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 22.186652] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 22.408049] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 22.449076] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.896569] r8169: eth0: link down
[ 26.896833] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.156050] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 31.194655] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.453800] r8169: eth0: link down
[ 31.454053] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.804110] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 31.856581] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.632704] wlan0: direct probe to AP 00:24:fe:05:e5:db (try 1)
[ 35.639189] wlan0: direct probe responded
[ 35.639197] wlan0: authenticate with AP 00:24:fe:05:e5:db (try 1)
[ 35.642136] wlan0: authenticated
[ 35.642170] wlan0: associate with AP 00:24:fe:05:e5:db (try 1)
[ 35.666169] wlan0: RX AssocResp from 00:24:fe:05:e5:db (capab=0x431 status=0 aid=1)
[ 35.666175] wlan0: associated
[ 35.667112] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 35.764793] padlock: VIA PadLock not detected.
[ 36.244079] type=1503 audit(1279713849.393:12): operation="open" pid=1440 parent=1348 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[ 45.728025] wlan0: no IPv6 routers present
[ 47.611339] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 60.865662] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 3013.000103] ACPI Error (dsfield-0143): [CB04] Namespace lookup failure, AE_ALREADY_EXISTS
[ 3013.000114] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.AMW0.WMCA] (Node f7012a68), AE_ALREADY_EXISTS
[ 3013.000124] ACPI: Marking method WMCA as Serialized because of AE_ALREADY_EXISTS error
[ 4220.343520] usb 1-1: USB disconnect, address 2
[ 4222.504088] usb 1-1: new high speed USB device using ehci_hcd and address 5
[ 4222.641626] usb 1-1: configuration #1 chosen from 1 choice
[ 4222.654965] af9015: tuner id:179 not supported, please report!
[ 4222.658003] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
[ 4222.658532] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.1/input/input11
[ 4222.658761] generic-usb 0003:15A4:9016.0004: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-1/input1
frans@Ubuntu:~$
