Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: fglrx install  (gelezen 856 keer)

Offline japper

  • Lid
  • Steunpunt: Nee
fglrx install
« Gepost op: 2006/10/24, 10:26:57 »
Hoi, ik heb mijn dapper naar Edgy geupgrade nu loop ik met fglrx tegen het volgende aan kan iemand mij opweg helpen?
Het betreft een x700 ati kaart

ik heb deze handleiding gevolgd:
http://wiki.cchtml.com/index.php/Ubuntu_Edgy_Installation_Guide

output

nij@ws:~$ cat /var/log/Xorg.0.log | grep fglrx

(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
(II) fglrx(0): pEnt->device->identifier=0x81e1a20
(II) fglrx(0): === [atiddxPreInit] === begin,
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DPMS"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "MOBILITY RADEON X700 (M26 5653)" (Chipset = 0x5653)
(--) fglrx(0): (PciSubVendor = 0x1179, PciSubDevice = 0xff01)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xb0100000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.10
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M26P
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(WW) fglrx(0): Failed to open DRM connection
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(II) fglrx(0): Video RAM override, using 256000 kB instead of 262144 kB
(**) fglrx(0): VideoRAM: 131072 kByte, Type: DDR1
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Connected Display1: LCD on internal LVDS
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: LPL  Model: 0  Serial#: 0
(II) fglrx(0): Year: 2005  Week: 0
(II) fglrx(0): EDID Version: 1.2
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 37  vert.: 23
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.592 redY: 0.344   greenX: 0.319 greenY: 0.553
(II) fglrx(0): blueX: 0.159 blueY: 0.144   whiteX: 0.312 whiteY: 0.328
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 96.2 MHz   Image Size:  367 x 230 mm
(II) fglrx(0): h_active: 1440  h_sync: 1504  h_sync_end 1536 h_blank_end 1760 h_border: 0
(II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 906 v_blanking: 912 v_border: 0
(II) fglrx(0):  LGPhilipsLCD
(II) fglrx(0):  LP171WX2-A4K7
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000008
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 14 modes found for primary display.
(--) fglrx(0): Virtual size is 1440x900 (pitch 0)
(**) fglrx(0): *Mode "1440x900": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1440x900"   96.21  1440 1504 1536 1760  900 903 906 912 +hsync +vsync
(**) fglrx(0): *Mode "1024x768": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   96.21  1024 1088 1120 1760  768 903 906 912 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   96.21  800 864 896 1760  600 903 906 912 +hsync +vsync
(**) fglrx(0): *Mode "640x480": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   96.21  640 704 736 1760  480 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "1152x864": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"   96.21  1152 1216 1248 1760  864 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "1024x480": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480"   96.21  1024 1088 1120 1760  480 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "848x480": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"   96.21  848 912 944 1760  480 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "720x576": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"   96.21  720 784 816 1760  576 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "720x480": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"   96.21  720 784 816 1760  480 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "640x400": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   96.21  640 704 736 1760  400 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "512x384": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   96.21  512 576 608 1760  384 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "400x300": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"   96.21  400 464 496 1760  300 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "320x240": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"   96.21  320 384 416 1760  240 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "320x200": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"   96.21  320 384 416 1760  200 903 906 912 +hsync +vsync
(--) fglrx(0): Display dimensions: (370, 230) mm
(--) fglrx(0): DPI set to (98, 99)
(--) fglrx(0): Virtual size is 1440x900 (pitch 1472)
(**) fglrx(0): *Mode "1440x900": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1440x900"   96.21  1440 1504 1536 1760  900 903 906 912 +hsync +vsync
(**) fglrx(0): *Mode "1024x768": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   96.21  1024 1088 1120 1760  768 903 906 912 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   96.21  800 864 896 1760  600 903 906 912 +hsync +vsync
(**) fglrx(0): *Mode "640x480": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   96.21  640 704 736 1760  480 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "1152x864": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"   96.21  1152 1216 1248 1760  864 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "1024x480": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480"   96.21  1024 1088 1120 1760  480 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "848x480": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"   96.21  848 912 944 1760  480 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "720x576": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"   96.21  720 784 816 1760  576 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "720x480": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"   96.21  720 784 816 1760  480 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "640x400": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   96.21  640 704 736 1760  400 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "512x384": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   96.21  512 576 608 1760  384 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "400x300": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"   96.21  400 464 496 1760  300 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "320x240": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"   96.21  320 384 416 1760  240 903 906 912 +hsync +vsync
(**) fglrx(0):  Default mode "320x200": 96.2 MHz (scaled from 0.0 MHz), 54.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"   96.21  320 384 416 1760  200 903 906 912 +hsync +vsync
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 128 MB
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) fglrx(0): UMM Bus area:     0xc0715000 (size=0x078cb000)
(II) fglrx(0): UMM area:     0xc0715000 (size=0x078cb000)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.1.0
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): [drm] DRM interface version 1.2
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf8d67000
(II) fglrx(0): [drm] mapped SAREA 0xf8d67000 to 0xb716b000
(II) fglrx(0): [drm] framebuffer handle = 0xc0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(EE) fglrx(0): Hardware has already been locked.
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xf8d67000 at 0xb716b000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x07fe0000
(II) fglrx(0): Splitting WC range: base: 0xc0000000, size: 0x7fe0000
(II) fglrx(0): Splitting WC range: base: 0xc4000000, size: 0x3fe0000
(II) fglrx(0): Splitting WC range: base: 0xc6000000, size: 0x1fe0000
(II) fglrx(0): Splitting WC range: base: 0xc7000000, size: 0xfe0000
(II) fglrx(0): Splitting WC range: base: 0xc7800000, size: 0x7e0000
(II) fglrx(0): Splitting WC range: base: 0xc7c00000, size: 0x3e0000
(II) fglrx(0): Splitting WC range: base: 0xc7e00000, size: 0x1e0000
(II) fglrx(0): Splitting WC range: base: 0xc7f00000, size: 0xe0000
(II) fglrx(0): Splitting WC range: base: 0xc7f80000, size: 0x60000
(==) fglrx(0): Write-combining range (0xc7fc0000,0x20000)
(==) fglrx(0): Write-combining range (0xc7f80000,0x60000)
(==) fglrx(0): Write-combining range (0xc7f00000,0xe0000)
(==) fglrx(0): Write-combining range (0xc7e00000,0x1e0000)
(==) fglrx(0): Write-combining range (0xc7c00000,0x3e0000)
(==) fglrx(0): Write-combining range (0xc7800000,0x7e0000)
(WW) fglrx(0): Failed to set up write-combining range (0xc7000000,0xfe0000)
(WW) fglrx(0): Failed to set up write-combining range (0xc6000000,0x1fe0000)
(WW) fglrx(0): Failed to set up write-combining range (0xc4000000,0x3fe0000)
(WW) fglrx(0): Failed to set up write-combining range (0xc0000000,0x7fe0000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1472,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1472,900) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Option "UseFBDev" is not used
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
(II) fglrx(0): Largest offscreen area available: 1472 x 7288
(**) fglrx(0): Video overlay enabled on CRTC1

nij@ws:~$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)

nij@ws:~$ glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
    GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
    GLX_ATI_pixel_format_float, GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)
OpenGL extensions:
    GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
    GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
    GL_EXT_texture_lod_bias

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  0  0  0  0  0  0 0 None
0x24 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  8 16 16 16  0  0 0 None
0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x26 24 tc  0 32  0 r  .  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x27 24 dc  0 24  0 r  y  .  8  8  8  0  0 16  0  0  0  0  0  0 0 None
0x28 24 dc  0 24  0 r  y  .  8  8  8  0  0 16  8 16 16 16  0  0 0 None
0x29 24 dc  0 32  0 r  y  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x2a 24 dc  0 32  0 r  .  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None

Offline zappa

  • Lid
    • http://www.c3c.be
  • Steunpunt: Nee
fglrx install
« Reactie #1 Gepost op: 2006/10/24, 11:20:56 »
Blijkbaar is fglrx nog steeds niet OK in edgy. Toen ik nog op edgy zat was er een oplossing door composite te disablen. Maar je kan de cache op je grafische kaart gebruiken zonder fglrx, indien je tenminste niet aan x-server bent verknocht ;)

Maar ben de touch een beetje verloren. Heb echter een sterk vermeoden dat profoX je feilloos kan helpen, anders zou ik eens op de eng fora gaan snuisteren, berryl en xgl.

Phaldmmor

  • Gast
fglrx install
« Reactie #2 Gepost op: 2006/10/24, 12:14:40 »
Ik heb mijn ATI-Readon 9200SE aan de praat gekregen onder Edgy met dezelfde handleiding.
Wat ik wel moest doen was het volgende toevoegen aan het einde mijn xorg.conf :

Section "Extensions"
        Option  "Composite" "0"
EndSection

Maar dit staat ook in de handleiding genoemd.
Het je ook geprobeert FGLRX uit te schakelen en de ATI-drives te installeren (methode 2 in de handleiding)?

Offline japper

  • Lid
  • Steunpunt: Nee
fglrx install
« Reactie #3 Gepost op: 2006/10/24, 13:10:57 »
Ja heb ik geprobeerd en geen resultaten.....