Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Problemen met geluid  (gelezen 1250 keer)

Offline hang-oor

  • Lid
  • Steunpunt: Nee
Problemen met geluid
« Gepost op: 2009/07/13, 12:46:09 »

Voor het afspelen van geluid maak ik gebruik van een audigy 2 zs kaart. Om problemen te voorkomen heb ik de onboard geluidskaart heb disabled in de bios, ondanks dat blijft ubuntu deze 'zien'.

In 8.04 werkte alles standaard goed. Ooit eens een upgrade gedaan naar 8.10 maar daar had ik problemen met het geluid o.a. flash en geluid gaat niet samen. Destijds naar dagen topics lezen en proberen het maar opgegeven en weer naar 8.04 gegaan.

Nu vond ik het wel eens tijd voor 9.04 (schone installatie) en ja hoor, hetzelfde probleem met het geluid. Kan mp3 afspelen, java games werken met geluid, maar weer geen flash i.c.m. geluid. Ook werkt de schuifbalk voor het harder en zachter zetten van het geluid niet. Moet gebruik maken van de button volumeregeling om het geluid harder en zachter te kunnen zetten. Bovendien kan het geluid niet echt hard.

Ik heb weer diverse topics gelezen, maar niks helpt..... Ik heb geen zin om alsnog terug te gaan naar 8.04 (vind dat geen oplossing meer).

Wat opvalt:
-bij openen alsamixer krijg ik de instellingen van de onboard kaart
-bij alsamixergui zie ik als kaart staan 'Pulseaudio'

Hoe krijg ik dit opgelost, bij voorkeur door systematisch alles langs te lopen.




Offline Gijsbert

  • Lid
  • Steunpunt: Ja
In der Beschränkung zeigt sich der Meister.

Offline hang-oor

  • Lid
  • Steunpunt: Nee
Re: Problemen met geluid
« Reactie #2 Gepost op: 2009/07/13, 13:16:09 »

Ik ken beide topics. Helaas werkt helemaal niks voor mij.

Zou iemand de uitkomst willen posten van: grep 'audio' /etc/group

dat is bij mij: audio:x:29:pulse




Offline Johan van Dijk

  • Administrator
    • johanvandijk
  • Steunpunt: Nee
Re: Problemen met geluid
« Reactie #3 Gepost op: 2009/07/13, 13:27:18 »
Je zou de drivers van de onboard geluidskaart kunnen blacklisten. Dan kan Ubuntu die geluidskaart niet meer gebruiken, en gebruikt hij dus altijd de Audigy2.


Pulseaudio is sinds 8.04 standaard in Ubuntu, en dat zou ik zo laten. Wat wel handig is om te doen:
Jezelf lid maken van de "pulse" groepen.
Dit kan via Systeem>beheer>gebruikers en groepen.
Ontgrendel het programma eerst met je wachtwoord en klik daarna op "groepen bewerken"
Zoek nu de "pulse" groepen op: pulse, pulse-access en pulse-rt. Klik bij iedere groep op de eigenschappen en voeg jouw gebruikersnaam toe.
De volgende keer dat je inlogt ben je lid van die groepen.

Mijn audio groep in /etc/group: audio:x:29:pulse,johan

Offline hang-oor

  • Lid
  • Steunpunt: Nee
Re: Problemen met geluid
« Reactie #4 Gepost op: 2009/07/13, 14:05:53 »

Ik heb mezelf toegevoegd aan de 'pulse' groepen. De uitkomst van: grep 'audio' /etc/group blijfte echter: audio:x:29:pulse (ook naar herstart).

Op welke manier kun je je onboard kaart blacklisten?


Offline Johan van Dijk

  • Administrator
    • johanvandijk
  • Steunpunt: Nee
Re: Problemen met geluid
« Reactie #5 Gepost op: 2009/07/13, 14:28:48 »
Om de groepen aan te passen ga je weer naar Gebruikers en Groepen.
Nu klik je op je eigen naam, en daarna op eigenschappen.
In het tabblad "gebruikersrechten" (de 3e) kan je alles aanvinken. Daar staat ook "Mag gebruik maken van audioapparatuur". Die moet je dan hebben.

Om de onboard kaart te kunnen blacklisten moet je eerst weten wat voor kaart het is en welke drivers die gebruikt.
Kan je het resultaat van de volgende commando's hier op het forum plakken?
Graag tussen [code][/code] tags.
De commando's:
sudo lspci -vvnn
lsmod

Offline hang-oor

  • Lid
  • Steunpunt: Nee
Re: Problemen met geluid
« Reactie #6 Gepost op: 2009/07/13, 15:41:05 »

Heb mezelf toegevoegd aan "Mag gebruik maken van audioapparatuur". Na herstart had dit helaas geen resultaat.
uitkomst van
sudo lspci -vvnn


00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:0282]
Subsystem: ASUSTeK Computer Inc. Device [1043:80a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M]
Capabilities: [80] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x8
Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] HyperTransport: Slave or Primary Interface
!!! Possibly incomplete decoding
Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
Revision ID: 1.02
Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration
Kernel driver in use: agpgart-amd64
Kernel modules: amd64-agp

00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:1282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:2282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:3282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:4282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:7282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] [1106:b188]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f9f00000-fbffffff
Prefetchable memory behind bridge: f0000000-f8ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: shpchp

00:0d.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless [11ab:1faa] (rev 03)
Subsystem: Netgear Device [1385:6b00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f9a00000 (32-bit, non-prefetchable) [size=64K]
Region 1: Memory at f9900000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ndiswrapper

00:0e.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004] (rev 04)
Subsystem: Creative Labs Device [1102:2002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at b000 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1

00:0e.1 Input device controller [0980]: Creative Labs SB Audigy Game Port [1102:7003] (rev 04)
Subsystem: Creative Labs Device [1102:0040]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: I/O ports at b400 [size=8]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp

00:0e.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port [1102:4001] (rev 04) (prog-if 10)
Subsystem: Creative Labs Device [1102:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 16
Region 0: Memory at f9c00000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f9b00000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394

00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at d400 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c400 [size=4]
Region 4: I/O ports at c000 [size=16]
Region 5: I/O ports at b800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sata_via

00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_via

00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd

00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd

00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd

00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd

00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at f9e00000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd

00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
Subsystem: ASUSTeK Computer Inc. Device [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: i2c-viapro

00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
Subsystem: ASUSTeK Computer Inc. Device [1043:812a]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at 1000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx

00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at 1400 [size=256]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: snd-via82xx-modem

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
Kernel modules: k8temp

01:00.0 VGA compatible controller [0300]: nVidia Corporation NV40.2 [GeForce 6800 LE] [10de:0042] (rev a1)
Subsystem: XFX Pine Group Inc. Device [1682:2104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at f9f00000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb


Offline hang-oor

  • Lid
  • Steunpunt: Nee
Re: Problemen met geluid
« Reactie #7 Gepost op: 2009/07/13, 15:41:18 »

uitkomst van:
lsmode

Module                  Size  Used by
binfmt_misc            16776  1
bridge                 56340  0
stp                    10500  1 bridge
bnep                   20224  2
input_polldev          11912  0
video                  25360  0
output                 11008  1 video
ndiswrapper           193436  0
lp                     17156  0
snd_via82xx_modem      19336  0
snd_via82xx            32152  2
snd_emu10k1_synth      14336  0
snd_emux_synth         40832  1 snd_emu10k1_synth
snd_mpu401_uart        15104  1 snd_via82xx
snd_seq_virmidi        13440  1 snd_emux_synth
snd_seq_midi_emul      14592  1 snd_emux_synth
snd_seq_dummy          10756  0
snd_emu10k1           144288  4 snd_emu10k1_synth
snd_seq_oss            37760  0
snd_ac97_codec        112292  3 snd_via82xx_modem,snd_via82xx,snd_emu10k1
snd_seq_midi           14336  0
ac97_bus                9856  1 snd_ac97_codec
snd_pcm_oss            46336  0
snd_mixer_oss          22656  1 snd_pcm_oss
snd_rawmidi            29696  4 snd_mpu401_uart,snd_seq_virmidi,snd_emu10k1,snd_seq_midi
snd_seq_midi_event     15104  3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_pcm                82948  5 snd_via82xx_modem,snd_via82xx,snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_seq                56880  9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_seq_device         14988  8 snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_emu10k1,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd_timer              29704  3 snd_emu10k1,snd_pcm,snd_seq
snd_util_mem           12288  2 snd_emux_synth,snd_emu10k1
nvidia               7233756  36
snd_hwdep              15108  2 snd_emux_synth,snd_emu10k1
psmouse                61972  0
ppdev                  15620  0
emu10k1_gp             10752  0
shpchp                 40212  0
serio_raw              13316  0
snd                    62628  26 snd_via82xx_modem,snd_via82xx,snd_emux_synth,snd_mpu401_uart,snd_seq_virmidi,snd_emu10k1,snd_seq_oss,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_rawmidi,snd_pcm,snd_seq,snd_seq_device,snd_timer,snd_hwdep
snd_page_alloc         16904  4 snd_via82xx_modem,snd_via82xx,snd_emu10k1,snd_pcm
pcspkr                 10496  0
soundcore              15200  1 snd
k8temp                 12416  0
amd64_agp              18184  1
agpgart                42696  2 nvidia,amd64_agp
gameport               19340  3 snd_via82xx,emu10k1_gp
parport_pc             40100  1
parport                42220  3 lp,ppdev,parport_pc
i2c_viapro             15892  0
usbhid                 42336  0
ohci1394               38576  0
ieee1394               94660  1 ohci1394
floppy                 64324  0
fbcon                  46112  0
tileblit               10752  1 fbcon
font                   16384  1 fbcon
bitblit                13824  1 fbcon
softcursor              9984  1 bitblit
jeroen@jeroen-desktop:~$ lsmod
Module                  Size  Used by
binfmt_misc            16776  1
bridge                 56340  0
stp                    10500  1 bridge
bnep                   20224  2
input_polldev          11912  0
video                  25360  0
output                 11008  1 video
ndiswrapper           193436  0
lp                     17156  0
snd_via82xx_modem      19336  0
snd_via82xx            32152  2
snd_emu10k1_synth      14336  0
snd_emux_synth         40832  1 snd_emu10k1_synth
snd_mpu401_uart        15104  1 snd_via82xx
snd_seq_virmidi        13440  1 snd_emux_synth
snd_seq_midi_emul      14592  1 snd_emux_synth
snd_seq_dummy          10756  0
snd_emu10k1           144288  4 snd_emu10k1_synth
snd_seq_oss            37760  0
snd_ac97_codec        112292  3 snd_via82xx_modem,snd_via82xx,snd_emu10k1
snd_seq_midi           14336  0
ac97_bus                9856  1 snd_ac97_codec
snd_pcm_oss            46336  0
snd_mixer_oss          22656  1 snd_pcm_oss
snd_rawmidi            29696  4 snd_mpu401_uart,snd_seq_virmidi,snd_emu10k1,snd_seq_midi
snd_seq_midi_event     15104  3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_pcm                82948  5 snd_via82xx_modem,snd_via82xx,snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_seq                56880  9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_seq_device         14988  8 snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_emu10k1,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd_timer              29704  3 snd_emu10k1,snd_pcm,snd_seq
snd_util_mem           12288  2 snd_emux_synth,snd_emu10k1
nvidia               7233756  36
snd_hwdep              15108  2 snd_emux_synth,snd_emu10k1
psmouse                61972  0
ppdev                  15620  0
emu10k1_gp             10752  0
shpchp                 40212  0
serio_raw              13316  0
snd                    62628  26 snd_via82xx_modem,snd_via82xx,snd_emux_synth,snd_mpu401_uart,snd_seq_virmidi,snd_emu10k1,snd_seq_oss,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_rawmidi,snd_pcm,snd_seq,snd_seq_device,snd_timer,snd_hwdep
snd_page_alloc         16904  4 snd_via82xx_modem,snd_via82xx,snd_emu10k1,snd_pcm
pcspkr                 10496  0
soundcore              15200  1 snd
k8temp                 12416  0
amd64_agp              18184  1
agpgart                42696  2 nvidia,amd64_agp
gameport               19340  3 snd_via82xx,emu10k1_gp
parport_pc             40100  1
parport                42220  3 lp,ppdev,parport_pc
i2c_viapro             15892  0
usbhid                 42336  0
ohci1394               38576  0
ieee1394               94660  1 ohci1394
floppy                 64324  0
fbcon                  46112  0
tileblit               10752  1 fbcon
font                   16384  1 fbcon
bitblit                13824  1 fbcon
softcursor              9984  1 bitblit
jeroen@jeroen-desktop:~$ lsmod
Module                  Size  Used by
binfmt_misc            16776  1
bridge                 56340  0
stp                    10500  1 bridge
bnep                   20224  2
input_polldev          11912  0
video                  25360  0
output                 11008  1 video
ndiswrapper           193436  0
lp                     17156  0
snd_via82xx_modem      19336  0
snd_via82xx            32152  2
snd_emu10k1_synth      14336  0
snd_emux_synth         40832  1 snd_emu10k1_synth
snd_mpu401_uart        15104  1 snd_via82xx
snd_seq_virmidi        13440  1 snd_emux_synth
snd_seq_midi_emul      14592  1 snd_emux_synth
snd_seq_dummy          10756  0
snd_emu10k1           144288  4 snd_emu10k1_synth
snd_seq_oss            37760  0
snd_ac97_codec        112292  3 snd_via82xx_modem,snd_via82xx,snd_emu10k1
snd_seq_midi           14336  0
ac97_bus                9856  1 snd_ac97_codec
snd_pcm_oss            46336  0
snd_mixer_oss          22656  1 snd_pcm_oss
snd_rawmidi            29696  4 snd_mpu401_uart,snd_seq_virmidi,snd_emu10k1,snd_seq_midi
snd_seq_midi_event     15104  3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_pcm                82948  5 snd_via82xx_modem,snd_via82xx,snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_seq                56880  9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_seq_device         14988  8 snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_emu10k1,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd_timer              29704  3 snd_emu10k1,snd_pcm,snd_seq
snd_util_mem           12288  2 snd_emux_synth,snd_emu10k1
nvidia               7233756  36
snd_hwdep              15108  2 snd_emux_synth,snd_emu10k1
psmouse                61972  0
ppdev                  15620  0
emu10k1_gp             10752  0
shpchp                 40212  0
serio_raw              13316  0
snd                    62628  26 snd_via82xx_modem,snd_via82xx,snd_emux_synth,snd_mpu401_uart,snd_seq_virmidi,snd_emu10k1,snd_seq_oss,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_rawmidi,snd_pcm,snd_seq,snd_seq_device,snd_timer,snd_hwdep
snd_page_alloc         16904  4 snd_via82xx_modem,snd_via82xx,snd_emu10k1,snd_pcm
pcspkr                 10496  0
soundcore              15200  1 snd
k8temp                 12416  0
amd64_agp              18184  1
agpgart                42696  2 nvidia,amd64_agp
gameport               19340  3 snd_via82xx,emu10k1_gp
parport_pc             40100  1
parport                42220  3 lp,ppdev,parport_pc
i2c_viapro             15892  0
usbhid                 42336  0
ohci1394               38576  0
ieee1394               94660  1 ohci1394
floppy                 64324  0
fbcon                  46112  0
tileblit               10752  1 fbcon
font                   16384  1 fbcon
bitblit                13824  1 fbcon
softcursor              9984  1 bitblit

Offline Johan van Dijk

  • Administrator
    • johanvandijk
  • Steunpunt: Nee
Re: Problemen met geluid
« Reactie #8 Gepost op: 2009/07/13, 16:15:56 »
Deze module moet geblacklist worden: snd-via82xx

Bestand openen:
gksudo gedit /etc/modprobe.d/blacklist.conf

Toevoegen:
blacklist snd-via82xx

Daarna:
sudo update-initramfs -u
Even wachten tot die klaar is voordat je de terminal afsluit.

Als je hierna reboot, zal Ubuntu je onboard kaart niet meer gebruiken als het goed is.

Offline hang-oor

  • Lid
  • Steunpunt: Nee
Re: Problemen met geluid
« Reactie #9 Gepost op: 2009/07/13, 18:54:20 »

Mijn dank is bijzonder groot!

Alles werkt zoals je zou verwachten!

Ondanks dat de onboard kaart op disabled staat in de bios gooit deze alles blijkbaar door de war. Ik ben dit ook als een tegen gekomen in games waarbij ik geen geluid had. Maar dat was dan op te lossen door in /etc/modprobe.d/alsa-base de voorkeursvolgorde vast te leggen zie hiervoor http://ubuntuforums.org/showthread.php?t=205449 (maar dit werkte niet voor het geen geluid ic.m. flash probleem).