Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Bestaat er een Kernel repository voor Ubuntu of Kubuntu?  (gelezen 1575 keer)

Offline merijn

  • Lid
  • Steunpunt: Nee
Bestaat er een Kernel repository voor Ubuntu of Kubuntu?
« Gepost op: 2006/10/18, 23:35:17 »
Hoi,ik heb de volgende vraag.
Ik zou wel eens willen weten of je in de sourcelist een kernel repository zou kunnen zetten.
Weet iemand of die bestaat?.
Nu gebruik ik de nieuwere kernel 2.6.15-27-k7,maar ik wil graag als die er is de kant en klare 2.6.18.1 kernel gebruiken zonder poespas.
Is er misschien al een ubuntu versie?,of moet ik wachten op Edy Eft waar hij misschien wel inzit.
Namelijk ik verwacht dan dat het fglrx probleem dan verholpen zal zijn,en nog meer problemen.
Zo heb ik dus ook een ander probleem met mijn mp3 speler van 512mb geheugen.
Dat werkt dus niet lekker.
Volgens de computer heb ik maar 48kb geheugen in mijn mp3 speler,en dat is natuurlijk veel te weinig.
Onder windows werkte mijn mp3speler wel altijd goed.
Misschien dat mijn speler niet compatibel is met Linux,maar dat lijkt mij sterk.
Ik heb ooit een gentoo Linux gehad en een andere mp3speler,toen had ik hetzelfe probleem.
Kortom het lijkt zo dat Linux altijd problemen heeft met mp3 spelers,terwijl er voor alle andere aparaten wel een oplossing is te vinden om die wel onder Linux goed te kunnen laten draaien.

Groeten,

M.Versteeg

Firebird

  • Gast
Bestaat er een Kernel repository voor Ubuntu of Kubuntu?
« Reactie #1 Gepost op: 2006/10/19, 02:31:15 »
Ieps,

Edgy Eft gebruikt wel degelijk een nieuwere versie van de linuxkernel (2.6.17.x). Of die nog zal in de repository komen voor Dapper zou ik niet kunnen zeggen... misschien kan je over korte tijd - wanneer Edgy definitief uit is - met de liveCD testen of het probleem verholpen is? Natuurlijk staat niets je in de weg om zelf de nieuwste kernel te downloaden, er een .deb van te maken en die te installeren, maar ik heb niet onmiddellijk een link naar een tutorial en weet ook zelf niet meer hoe :).

Groetjes,
Birdy.

Offline kennywest

  • Lid
    • http://kennywest.blogspot.com
  • Steunpunt: Nee
Bestaat er een Kernel repository voor Ubuntu of Kubuntu?
« Reactie #2 Gepost op: 2006/10/19, 08:13:54 »
Ik heb de 2.6.18.1 gecompileerd op Dapper, maar hij blijft hangen. De kernel config werkte nochtans perfect op Breezy. Pffft, ik heb het opgegeven. Zal wel weer een compatibiliteitsprobleem zijn met hal of udev.

Azalin

  • Gast
Bestaat er een Kernel repository voor Ubuntu of Kubuntu?
« Reactie #3 Gepost op: 2006/10/19, 08:32:54 »
Wellicht de reden dat die niet in Edgy zit... ik doe ook maar een duit in het zakje. Wat ik wel weet is dat je niet hoeft te verwachten dat er een hele nieuwe kernel in Dapper komt. Dat is wat mij verteld is tenminste. Er worden wel veiligheidsupdates en updates die fouten verhelpen uitgebracht voor dapper maar een nieuwe kernel was pas in Edgy weer sprake van meen ik.

Hardware problemen met het niet goed herkennen van je mp3 speler echter, lijkt mij meer een driver probleem.. is daar niet een custom driver voor te downloaden ergens? en fglrx problemen, tja, ik dacht eerst dat het voor iedereen zo zou moeten werken maar uit ervaring blijkt inderdaad wel dat de driver niet voor iedereen even goed werkt. Wellicht heb ik mazzel. ATI zou, net als NVidia, eens wat meer aandacht aan hun Linux drivers moeten besteden. Aan de andere kant, de drivers zijjn er wel, dat kan ik van Sitecom weer niet zeggen.

Offline kennywest

  • Lid
    • http://kennywest.blogspot.com
  • Steunpunt: Nee
Bestaat er een Kernel repository voor Ubuntu of Kubuntu?
« Reactie #4 Gepost op: 2006/10/19, 13:47:16 »
Als Dapper LTS is, dan horen daar ook nieuwe kernels bij IMHO. Wat is anders het nut van de LTS (= long term support = 5 jaar support). Mensen met recentere hardware blijven in de kou staan, omdat deze hardware pas in een, 2 versies verdere, kernel ondersteund is. Vandaar dat ik tijdens Hoary al een zelfgebakken kernel had. Toen ging dat nog, nu niet meer blijkbaar :(

Terug ontopic. @Merijn, wat zegt de output van dmesg als je het ding inplugt?

Azalin

  • Gast
Bestaat er een Kernel repository voor Ubuntu of Kubuntu?
« Reactie #5 Gepost op: 2006/10/19, 14:42:31 »
nog steeds ontopic: mmm, ik herhaal ook maar wat mij verteld is.. maar mijns inziens zijn DE repos toch gewoon de plek waar je kernels vandaan haalt. als er geen nieuwe beschikbaar is dan .. tja, is er geen nieuwe tenzij er backports ofzo gemaakt zijn. Net zoals Amarok lijkt mij, Amarok 1.3 is er alleen voor Dapper, tenzij je de backports aanzet, dan kan je 1.4 installeren.

Offline merijn

  • Lid
  • Steunpunt: Nee
Bestaat er een Kernel repository voor Ubuntu of Kubuntu?
« Reactie #6 Gepost op: 2006/10/19, 16:48:42 »
Ok jongens bedankt allemaal,dan moet ik mij maar even behelpen,ik zal wel even kijken of er een speciale linuxdriver dan is voor mijn mp3speler,we zullen zien wat Edgy dan allemaal aan boord heeft wat betreft kernels en fglrx ondersteuning.
Als die uitkomt als het goed is kan de lancering ervan niet meer lang uit blijven,ik denk dat ze in dit geval de deahtline niet zullen halen,want hij hoort toch omstreeks deze maand uit te komen?,als ik alles goed gevolgd heb?.
Maar ja er waren schijnbaar nog te veel bugs om het groene licht te geven om te lanceren.

Groeten,

M Versteeg

Offline merijn

  • Lid
  • Steunpunt: Nee
Bestaat er een Kernel repository voor Ubuntu of Kubuntu?
« Reactie #7 Gepost op: 2006/10/19, 16:57:33 »
Citaat van: kennywest
Als Dapper LTS is, dan horen daar ook nieuwe kernels bij IMHO. Wat is anders het nut van de LTS (= long term support = 5 jaar support). Mensen met recentere hardware blijven in de kou staan, omdat deze hardware pas in een, 2 versies verdere, kernel ondersteund is. Vandaar dat ik tijdens Hoary al een zelfgebakken kernel had. Toen ging dat nog, nu niet meer blijkbaar :(

Terug ontopic. @Merijn, wat zegt de output van dmesg als je het ding inplugt?
dan geeft hij deze hele waslijst.


[17179569.184000] Linux version 2.6.15-27-k7 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sat Sep 16 02:35:20 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[17179569.184000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 262128
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 32752 pages, LIFO batch:7
[17179569.184000] DMI 2.2 present.
[17179569.184000] ACPI: RSDP (v000 Nvidia                                ) @ 0x000f75e0
[17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
[17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7640
[17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:10 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] ACPI: IRQ14 used by override.
[17179569.184000] ACPI: IRQ15 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda5 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2079.741 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.368000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.368000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[17179569.396000] Memory: 1027208k/1048512k available (2103k kernel code, 20576k reserved, 599k data, 332k init, 131008k highmem)
[17179569.396000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.476000] Calibrating delay using timer specific routine.. 4163.91 BogoMIPS (lpj=8327834)
[17179569.476000] Security Framework v1.0.0 initialized
[17179569.476000] SELinux:  Disabled at boot.
[17179569.476000] Mount-cache hash table entries: 512
[17179569.476000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179569.476000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179569.476000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179569.476000] CPU: L2 Cache: 512K (64 bytes/line)
[17179569.476000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[17179569.476000] mtrr: v2.0 (20020519)
[17179569.476000] Enabling fast FPU save and restore... done.
[17179569.476000] Enabling unmasked SIMD FPU exception support... done.
[17179569.476000] Checking 'hlt' instruction... OK.
[17179569.492000] SMP alternatives: switching to UP code
[17179569.492000] checking if image is initramfs... it is
[17179569.996000] Freeing initrd memory: 6771k freed
[17179570.012000] ACPI: Looking for DSDT ... not found!
[17179570.012000] CPU0: AMD Athlon(tm) XP 2800+ stepping 00
[17179570.012000] Total of 1 processors activated (4163.91 BogoMIPS).
[17179570.012000] ENABLING IO-APIC IRQs
[17179570.012000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179570.156000] Brought up 1 CPUs
[17179570.156000] NET: Registered protocol family 16
[17179570.156000] EISA bus registered
[17179570.156000] ACPI: bus type pci registered
[17179570.172000] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
[17179570.172000] PCI: Using configuration type 1
[17179570.172000] ACPI: Subsystem revision 20051216
[17179570.180000] ACPI: Interpreter enabled
[17179570.180000] ACPI: Using IOAPIC for interrupt routing
[17179570.180000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.180000] PCI: Probing PCI hardware (bus 00)
[17179570.184000] PCI: nForce2 C1 Halt Disconnect fixup
[17179570.184000] Boot video device is 0000:03:00.0
[17179570.184000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.244000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179570.244000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[17179570.244000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.244000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179570.244000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179570.244000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179570.244000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.248000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.248000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.248000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.248000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[17179570.248000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[17179570.248000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[17179570.248000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[17179570.256000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.256000] pnp: PnP ACPI init
[17179570.264000] pnp: PnP ACPI: found 15 devices
[17179570.264000] PnPBIOS: Disabled by ACPI PNP
[17179570.264000] PCI: Using ACPI for IRQ routing
[17179570.264000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179570.328000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[17179570.328000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[17179570.328000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[17179570.328000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[17179570.328000] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[17179570.328000] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[17179570.328000] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[17179570.328000] pnp: 00:01: ioport range 0x5500-0x553f has been reserved
[17179570.328000] PCI: Bridge: 0000:00:08.0
[17179570.328000]   IO window: 9000-afff
[17179570.328000]   MEM window: e3000000-e4ffffff
[17179570.328000]   PREFETCH window: 50000000-500fffff
[17179570.328000] PCI: Bridge: 0000:00:1e.0
[17179570.328000]   IO window: c000-cfff
[17179570.328000]   MEM window: e1000000-e2ffffff
[17179570.328000]   PREFETCH window: d0000000-dfffffff
[17179570.328000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[17179570.328000] audit: initializing netlink socket (disabled)
[17179570.328000] audit(1161215020.324:1): initialized
[17179570.328000] highmem bounce pool size: 64 pages
[17179570.328000] VFS: Disk quotas dquot_6.5.1
[17179570.328000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.328000] Initializing Cryptographic API
[17179570.328000] io scheduler noop registered
[17179570.328000] io scheduler anticipatory registered
[17179570.328000] io scheduler deadline registered
[17179570.328000] io scheduler cfq registered
[17179570.328000] isapnp: Scanning for PnP cards...
[17179570.684000] isapnp: No Plug & Play device found
[17179570.696000] Real Time Clock Driver v1.12
[17179570.696000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179570.696000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179571.724000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.728000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.728000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179571.728000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.728000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.728000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.728000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.728000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.728000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.728000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.728000] mice: PS/2 mouse device common for all mice
[17179571.728000] EISA: Probing bus 0 at eisa.0
[17179571.728000] Cannot allocate resource for EISA slot 4
[17179571.728000] Cannot allocate resource for EISA slot 5
[17179571.728000] EISA: Detected 0 cards.
[17179571.728000] NET: Registered protocol family 2
[17179571.780000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.792000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.792000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes)
[17179571.796000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[17179571.796000] TCP: Hash tables configured (established 262144 bind 65536)
[17179571.796000] TCP reno registered
[17179571.796000] TCP bic registered
[17179571.796000] NET: Registered protocol family 1
[17179571.796000] NET: Registered protocol family 8
[17179571.796000] NET: Registered protocol family 20
[17179571.796000] Using IPI No-Shortcut mode
[17179571.796000] ACPI wakeup devices:
[17179571.796000] HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
[17179571.796000] ACPI: (supports S0 S1 S4 S5)
[17179571.796000] Freeing unused kernel memory: 332k freed
[17179571.840000] vga16fb: initializing
[17179571.840000] vga16fb: mapped to 0xc00a0000
[17179571.972000] Console: switching to colour frame buffer device 80x25
[17179571.972000] fb0: VGA16 VGA frame buffer device
[17179572.992000] Capability LSM initialized
[17179573.660000] SCSI subsystem initialized
[17179573.660000] ACPI: bus type scsi registered
[17179573.660000] libata version 1.20 loaded.
[17179573.664000] sata_sil 0000:01:0b.0: version 0.9
[17179573.664000] **** SET: Misaligned resource pointer: df86eb62 Type 07 Len 0
[17179573.664000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[17179573.664000] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 177
[17179573.664000] ata1: SATA max UDMA/100 cmd 0xF885E080 ctl 0xF885E08A bmdma 0xF885E000 irq 177
[17179573.664000] ata2: SATA max UDMA/100 cmd 0xF885E0C0 ctl 0xF885E0CA bmdma 0xF885E008 irq 177
[17179573.868000] ata1: no device found (phy stat 00000000)
[17179573.868000] scsi0 : sata_sil
[17179574.076000] ata2: no device found (phy stat 00000000)
[17179574.076000] scsi1 : sata_sil
[17179574.116000] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[17179574.116000] NFORCE2: chipset revision 162
[17179574.116000] NFORCE2: not 100% native mode: will probe irqs later
[17179574.116000] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
[17179574.116000] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[17179574.116000]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[17179574.116000]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[17179574.116000] Probing IDE interface ide0...
[17179574.404000] hda: Maxtor 6Y120P0, ATA DISK drive
[17179575.084000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.084000] Probing IDE interface ide1...
[17179575.824000] hdc: BENQ DVD DD DW1650, ATAPI CD/DVD-ROM drive
[17179576.608000] hdd: JLMS XJ-HD165H, ATAPI CD/DVD-ROM drive
[17179576.668000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.680000] hda: max request size: 128KiB
[17179576.688000] hda: 234375000 sectors (120000 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
[17179576.688000] hda: cache flushes supported
[17179576.688000]  hda: hda1 hda2 < hda5 hda6 hda7 >
[17179576.732000] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179576.732000] Uniform CD-ROM driver Revision: 3.20
[17179576.740000] hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[17179576.988000] usbcore: registered new driver usbfs
[17179576.988000] usbcore: registered new driver hub
[17179576.988000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179576.988000] **** SET: Misaligned resource pointer: df86e7a2 Type 07 Len 0
[17179576.988000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[17179576.988000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 185
[17179576.988000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179576.988000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179577.040000] ieee1394: Initialized config rom entry `ip1394'
[17179577.072000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[17179577.072000] ohci_hcd 0000:00:02.0: irq 185, io mem 0xe5087000
[17179577.132000] hub 1-0:1.0: USB hub found
[17179577.132000] hub 1-0:1.0: 3 ports detected
[17179577.236000] **** SET: Misaligned resource pointer: df86e4a2 Type 07 Len 0
[17179577.240000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[17179577.240000] ACPI: PCI Interrupt 0000:00:02.1 -> Link [APCG] -> GSI 21 (level, high) -> IRQ 193
[17179577.240000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179577.240000] ohci_hcd 0000:00:02.1: OHCI Host Controller
[17179577.268000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[17179577.268000] ohci_hcd 0000:00:02.1: irq 193, io mem 0xe5082000
[17179577.328000] hub 2-0:1.0: USB hub found
[17179577.328000] hub 2-0:1.0: 3 ports detected
[17179577.436000] **** SET: Misaligned resource pointer: df86e322 Type 07 Len 0
[17179577.436000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[17179577.436000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 201
[17179577.436000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[17179577.436000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[17179577.436000] ehci_hcd 0000:00:02.2: debug port 1
[17179577.436000] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[17179577.436000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[17179577.436000] ehci_hcd 0000:00:02.2: irq 201, io mem 0xe5083000
[17179577.436000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.436000] hub 3-0:1.0: USB hub found
[17179577.436000] hub 3-0:1.0: 6 ports detected
[17179577.544000] ohci1394: $Rev: 1313 $ Ben Collins
[17179577.544000] **** SET: Misaligned resource pointer: df86e1a2 Type 07 Len 0
[17179577.544000] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
[17179577.544000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 22 (level, high) -> IRQ 185
[17179577.544000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[17179577.596000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185]  MMIO=[e5084000-e50847ff]  Max Packet=[2048]
[17179577.668000] Attempting manual resume
[17179577.672000] ReiserFS: hda5: found reiserfs format "3.6" with standard journal
[17179578.392000] usb 2-1: new full speed USB device using ohci_hcd and address 2
[17179578.712000] ohci1394: fw-host0: SelfID received outside of bus reset sequence
[17179578.992000] ReiserFS: hda5: using ordered data mode
[17179579.000000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800004dc2c1]
[17179579.008000] ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179579.008000] ReiserFS: hda5: checking transaction log (hda5)
[17179579.016000] usb 2-2: new low speed USB device using ohci_hcd and address 3[17179579.056000] ReiserFS: hda5: Using r5 hash to sort names
[17179588.648000] Linux agpgart interface v0.101 (c) Dave Jones
[17179588.676000] input: PC Speaker as /class/input/input1
[17179588.704000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[17179588.704000] **** SET: Misaligned resource pointer: dfb80ac2 Type 07 Len 0
[17179588.708000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[17179588.708000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 21 (level, high) -> IRQ 193
[17179588.708000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179588.728000] agpgart: Detected NVIDIA nForce2 chipset
[17179588.744000] agpgart: AGP aperture is 256M @ 0xc0000000
[17179588.768000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[17179588.768000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
[17179589.120000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179589.136000] parport: PnPBIOS parport detected.
[17179589.136000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179589.164000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1065
[17179589.164000] usbcore: registered new driver usblp
[17179589.164000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179589.184000] Floppy drive(s): fd0 is 1.44M
[17179589.204000] FDC 0 is a post-1991 82077
[17179589.232000] usbcore: registered new driver hiddev
[17179589.260000] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0[17179589.260000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179589.260000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[17179589.260000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-2
[17179589.260000] usbcore: registered new driver usbhid
[17179589.260000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179589.488000] ts: Compaq touchscreen protocol output
[17179589.548000] **** SET: Misaligned resource pointer: f74baba2 Type 07 Len 0
[17179589.548000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[17179589.548000] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 209
[17179589.548000] skge 1.5 addr 0xe4000000 irq 209 chip Yukon-Lite rev 7
[17179589.548000] skge eth1: addr 00:0e:a6:23:d3:76
[17179589.596000] **** SET: Misaligned resource pointer: f74baae2 Type 07 Len 0
[17179589.596000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[17179589.596000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 201
[17179589.596000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179589.704000] skge eth1: enabling interface
[17179589.920000] intel8x0_measure_ac97_clock: measured 56767 usecs
[17179589.920000] intel8x0: clocking to 48000
[17179590.344000] lp0: using parport0 (interrupt-driven).
[17179590.364000] sbp2: $Rev: 1306 $ Ben Collins
[17179590.364000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179590.364000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179590.428000] Adding 1951856k swap on /dev/hda7.  Priority:-1 extents:1 across:1951856k
[17179590.780000] NET: Registered protocol family 17
[17179590.932000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179590.932000] md: bitmap version 4.39
[17179591.444000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179591.456000] skge eth1: Link is up at 100 Mbps, full duplex, flow control tx and rx
[17179591.984000] cdrom: open failed.
[17179592.332000] cdrom: open failed.
[17179592.332000] cdrom: open failed.
[17179601.048000] ReiserFS: hda1: found reiserfs format "3.6" with standard journal
[17179601.192000] ReiserFS: hda1: using ordered data mode
[17179601.220000] ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179601.220000] ReiserFS: hda1: checking transaction log (hda1)
[17179601.284000] ReiserFS: hda1: Using r5 hash to sort names
[17179601.284000] ReiserFS: hda6: found reiserfs format "3.6" with standard journal
[17179601.288000] ReiserFS: hda6: using ordered data mode
[17179601.288000] ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179601.288000] ReiserFS: hda6: checking transaction log (hda6)
[17179601.288000] ReiserFS: hda6: Using r5 hash to sort names
[17179601.456000] NET: Registered protocol family 10
[17179601.456000] lo: Disabled Privacy Extensions
[17179601.456000] IPv6 over IPv4 tunneling driver
[17179602.504000] pcc_acpi: loading...
[17179602.520000] ACPI: Power Button (FF) [PWRF]
[17179602.520000] ACPI: Power Button (CM) [PWRB]
[17179602.572000] ibm_acpi: ec object not found
[17179606.544000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179606.544000] [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
[17179606.548000] [fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0[17179606.592000] **** SET: Misaligned resource pointer: f7a43e62 Type 07 Len 0
[17179606.592000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[17179606.592000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 217
[17179608.128000] [fglrx:firegl_unlock] *ERROR* Process 4505 using kernel context 0
[17179608.612000] ppdev: user-space parallel port driver
[17179609.028000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179609.028000] apm: overridden by ACPI.
[17179611.928000] eth1: no IPv6 routers present
[17179616.816000] Bluetooth: Core ver 2.8
[17179616.816000] NET: Registered protocol family 31
[17179616.816000] Bluetooth: HCI device and connection manager initialized
[17179616.816000] Bluetooth: HCI socket layer initialized
[17179616.984000] Bluetooth: L2CAP ver 2.8
[17179616.984000] Bluetooth: L2CAP socket layer initialized
[17179617.024000] Bluetooth: RFCOMM socket layer initialized
[17179617.024000] Bluetooth: RFCOMM TTY layer initialized
[17179617.024000] Bluetooth: RFCOMM ver 1.7
[17241513.880000] ohci_hcd 0000:00:02.0: wakeup
[17241514.264000] usb 1-3: new full speed USB device using ohci_hcd and address 2
[17241515.692000] Initializing USB Mass Storage driver...
[17241515.696000] scsi2 : SCSI emulation for USB Mass Storage devices
[17241515.696000] usb-storage: device found at 2
[17241515.696000] usb-storage: waiting for device to settle before scanning
[17241515.696000] usbcore: registered new driver usb-storage
[17241515.696000] USB Mass Storage support registered.
[17241520.704000]   Vendor: SigmaTel  Model: MSCN              Rev: 0100
[17241520.704000]   Type:   Direct-Access                      ANSI SCSI revision: 04
[17241520.724000] usb-storage: device scan complete
[17241520.800000] Driver 'sd' needs updating - please use bus_type methods
[17241520.808000] SCSI device sda: 1019648 512-byte hdwr sectors (522 MB)
[17241520.816000] sda: Write Protect is off
[17241520.816000] sda: Mode Sense: 03 00 00 00
[17241520.816000] sda: assuming drive cache: write through
[17241520.844000] SCSI device sda: 1019648 512-byte hdwr sectors (522 MB)
[17241520.848000] sda: Write Protect is off
[17241520.848000] sda: Mode Sense: 03 00 00 00
[17241520.852000] sda: assuming drive cache: write through
[17241520.852000]  sda: sda1
[17241520.860000] sd 2:0:0:0: Attached scsi removable disk sda
[17241520.892000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[17241522.132000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
merijn@Ubuntu:~$

-----------------------

Als ik hem weer ontkoppel geeft hij dit.
Ik ben nog niet zo ervaren met Linux dus wat ze met de hele waslijst bedoelen snap ik nog niet helemaal misschien weet iemand anders het dan wel.
==============================================


[17179569.184000] Linux version 2.6.15-27-k7 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sat Sep 16 02:35:20 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[17179569.184000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 262128
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 32752 pages, LIFO batch:7
[17179569.184000] DMI 2.2 present.
[17179569.184000] ACPI: RSDP (v000 Nvidia                                ) @ 0x000f75e0
[17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
[17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7640
[17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:10 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] ACPI: IRQ14 used by override.
[17179569.184000] ACPI: IRQ15 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda5 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2079.741 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.368000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.368000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[17179569.396000] Memory: 1027208k/1048512k available (2103k kernel code, 20576k reserved, 599k data, 332k init, 131008k highmem)
[17179569.396000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.476000] Calibrating delay using timer specific routine.. 4163.91 BogoMIPS (lpj=8327834)
[17179569.476000] Security Framework v1.0.0 initialized
[17179569.476000] SELinux:  Disabled at boot.
[17179569.476000] Mount-cache hash table entries: 512
[17179569.476000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179569.476000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[17179569.476000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179569.476000] CPU: L2 Cache: 512K (64 bytes/line)
[17179569.476000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[17179569.476000] mtrr: v2.0 (20020519)
[17179569.476000] Enabling fast FPU save and restore... done.
[17179569.476000] Enabling unmasked SIMD FPU exception support... done.
[17179569.476000] Checking 'hlt' instruction... OK.
[17179569.492000] SMP alternatives: switching to UP code
[17179569.492000] checking if image is initramfs... it is
[17179569.996000] Freeing initrd memory: 6771k freed
[17179570.012000] ACPI: Looking for DSDT ... not found!
[17179570.012000] CPU0: AMD Athlon(tm) XP 2800+ stepping 00
[17179570.012000] Total of 1 processors activated (4163.91 BogoMIPS).
[17179570.012000] ENABLING IO-APIC IRQs
[17179570.012000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179570.156000] Brought up 1 CPUs
[17179570.156000] NET: Registered protocol family 16
[17179570.156000] EISA bus registered
[17179570.156000] ACPI: bus type pci registered
[17179570.172000] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
[17179570.172000] PCI: Using configuration type 1
[17179570.172000] ACPI: Subsystem revision 20051216
[17179570.180000] ACPI: Interpreter enabled
[17179570.180000] ACPI: Using IOAPIC for interrupt routing
[17179570.180000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.180000] PCI: Probing PCI hardware (bus 00)
[17179570.184000] PCI: nForce2 C1 Halt Disconnect fixup
[17179570.184000] Boot video device is 0000:03:00.0
[17179570.184000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.244000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179570.244000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[17179570.244000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.244000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179570.244000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179570.244000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179570.244000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.248000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.248000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179570.248000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.248000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.248000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[17179570.248000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[17179570.248000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[17179570.248000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[17179570.252000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[17179570.256000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.256000] pnp: PnP ACPI init
[17179570.264000] pnp: PnP ACPI: found 15 devices
[17179570.264000] PnPBIOS: Disabled by ACPI PNP
[17179570.264000] PCI: Using ACPI for IRQ routing
[17179570.264000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179570.328000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[17179570.328000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[17179570.328000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[17179570.328000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[17179570.328000] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[17179570.328000] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[17179570.328000] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[17179570.328000] pnp: 00:01: ioport range 0x5500-0x553f has been reserved
[17179570.328000] PCI: Bridge: 0000:00:08.0
[17179570.328000]   IO window: 9000-afff
[17179570.328000]   MEM window: e3000000-e4ffffff
[17179570.328000]   PREFETCH window: 50000000-500fffff
[17179570.328000] PCI: Bridge: 0000:00:1e.0
[17179570.328000]   IO window: c000-cfff
[17179570.328000]   MEM window: e1000000-e2ffffff
[17179570.328000]   PREFETCH window: d0000000-dfffffff
[17179570.328000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[17179570.328000] audit: initializing netlink socket (disabled)
[17179570.328000] audit(1161215020.324:1): initialized
[17179570.328000] highmem bounce pool size: 64 pages
[17179570.328000] VFS: Disk quotas dquot_6.5.1
[17179570.328000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.328000] Initializing Cryptographic API
[17179570.328000] io scheduler noop registered
[17179570.328000] io scheduler anticipatory registered
[17179570.328000] io scheduler deadline registered
[17179570.328000] io scheduler cfq registered
[17179570.328000] isapnp: Scanning for PnP cards...
[17179570.684000] isapnp: No Plug & Play device found
[17179570.696000] Real Time Clock Driver v1.12
[17179570.696000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179570.696000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179571.724000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.728000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.728000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179571.728000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.728000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.728000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.728000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.728000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.728000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.728000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.728000] mice: PS/2 mouse device common for all mice
[17179571.728000] EISA: Probing bus 0 at eisa.0
[17179571.728000] Cannot allocate resource for EISA slot 4
[17179571.728000] Cannot allocate resource for EISA slot 5
[17179571.728000] EISA: Detected 0 cards.
[17179571.728000] NET: Registered protocol family 2
[17179571.780000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.792000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.792000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes)
[17179571.796000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[17179571.796000] TCP: Hash tables configured (established 262144 bind 65536)
[17179571.796000] TCP reno registered
[17179571.796000] TCP bic registered
[17179571.796000] NET: Registered protocol family 1
[17179571.796000] NET: Registered protocol family 8
[17179571.796000] NET: Registered protocol family 20
[17179571.796000] Using IPI No-Shortcut mode
[17179571.796000] ACPI wakeup devices:
[17179571.796000] HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
[17179571.796000] ACPI: (supports S0 S1 S4 S5)
[17179571.796000] Freeing unused kernel memory: 332k freed
[17179571.840000] vga16fb: initializing
[17179571.840000] vga16fb: mapped to 0xc00a0000
[17179571.972000] Console: switching to colour frame buffer device 80x25
[17179571.972000] fb0: VGA16 VGA frame buffer device
[17179572.992000] Capability LSM initialized
[17179573.660000] SCSI subsystem initialized
[17179573.660000] ACPI: bus type scsi registered
[17179573.660000] libata version 1.20 loaded.
[17179573.664000] sata_sil 0000:01:0b.0: version 0.9
[17179573.664000] **** SET: Misaligned resource pointer: df86eb62 Type 07 Len 0
[17179573.664000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[17179573.664000] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 177
[17179573.664000] ata1: SATA max UDMA/100 cmd 0xF885E080 ctl 0xF885E08A bmdma 0xF885E000 irq 177
[17179573.664000] ata2: SATA max UDMA/100 cmd 0xF885E0C0 ctl 0xF885E0CA bmdma 0xF885E008 irq 177
[17179573.868000] ata1: no device found (phy stat 00000000)
[17179573.868000] scsi0 : sata_sil
[17179574.076000] ata2: no device found (phy stat 00000000)
[17179574.076000] scsi1 : sata_sil
[17179574.116000] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[17179574.116000] NFORCE2: chipset revision 162
[17179574.116000] NFORCE2: not 100% native mode: will probe irqs later
[17179574.116000] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
[17179574.116000] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[17179574.116000]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[17179574.116000]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[17179574.116000] Probing IDE interface ide0...
[17179574.404000] hda: Maxtor 6Y120P0, ATA DISK drive
[17179575.084000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.084000] Probing IDE interface ide1...
[17179575.824000] hdc: BENQ DVD DD DW1650, ATAPI CD/DVD-ROM drive
[17179576.608000] hdd: JLMS XJ-HD165H, ATAPI CD/DVD-ROM drive
[17179576.668000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.680000] hda: max request size: 128KiB
[17179576.688000] hda: 234375000 sectors (120000 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
[17179576.688000] hda: cache flushes supported
[17179576.688000]  hda: hda1 hda2 < hda5 hda6 hda7 >
[17179576.732000] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179576.732000] Uniform CD-ROM driver Revision: 3.20
[17179576.740000] hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[17179576.988000] usbcore: registered new driver usbfs
[17179576.988000] usbcore: registered new driver hub
[17179576.988000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179576.988000] **** SET: Misaligned resource pointer: df86e7a2 Type 07 Len 0
[17179576.988000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[17179576.988000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 185
[17179576.988000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179576.988000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179577.040000] ieee1394: Initialized config rom entry `ip1394'
[17179577.072000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[17179577.072000] ohci_hcd 0000:00:02.0: irq 185, io mem 0xe5087000
[17179577.132000] hub 1-0:1.0: USB hub found
[17179577.132000] hub 1-0:1.0: 3 ports detected
[17179577.236000] **** SET: Misaligned resource pointer: df86e4a2 Type 07 Len 0
[17179577.240000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[17179577.240000] ACPI: PCI Interrupt 0000:00:02.1 -> Link [APCG] -> GSI 21 (level, high) -> IRQ 193
[17179577.240000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179577.240000] ohci_hcd 0000:00:02.1: OHCI Host Controller
[17179577.268000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[17179577.268000] ohci_hcd 0000:00:02.1: irq 193, io mem 0xe5082000
[17179577.328000] hub 2-0:1.0: USB hub found
[17179577.328000] hub 2-0:1.0: 3 ports detected
[17179577.436000] **** SET: Misaligned resource pointer: df86e322 Type 07 Len 0
[17179577.436000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[17179577.436000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 201
[17179577.436000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[17179577.436000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[17179577.436000] ehci_hcd 0000:00:02.2: debug port 1
[17179577.436000] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[17179577.436000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[17179577.436000] ehci_hcd 0000:00:02.2: irq 201, io mem 0xe5083000
[17179577.436000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.436000] hub 3-0:1.0: USB hub found
[17179577.436000] hub 3-0:1.0: 6 ports detected
[17179577.544000] ohci1394: $Rev: 1313 $ Ben Collins
[17179577.544000] **** SET: Misaligned resource pointer: df86e1a2 Type 07 Len 0
[17179577.544000] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
[17179577.544000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 22 (level, high) -> IRQ 185
[17179577.544000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[17179577.596000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185]  MMIO=[e5084000-e50847ff]  Max Packet=[2048]
[17179577.668000] Attempting manual resume
[17179577.672000] ReiserFS: hda5: found reiserfs format "3.6" with standard journal
[17179578.392000] usb 2-1: new full speed USB device using ohci_hcd and address 2
[17179578.712000] ohci1394: fw-host0: SelfID received outside of bus reset sequence
[17179578.992000] ReiserFS: hda5: using ordered data mode
[17179579.000000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800004dc2c1]
[17179579.008000] ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179579.008000] ReiserFS: hda5: checking transaction log (hda5)
[17179579.016000] usb 2-2: new low speed USB device using ohci_hcd and address 3[17179579.056000] ReiserFS: hda5: Using r5 hash to sort names
[17179588.648000] Linux agpgart interface v0.101 (c) Dave Jones
[17179588.676000] input: PC Speaker as /class/input/input1
[17179588.704000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[17179588.704000] **** SET: Misaligned resource pointer: dfb80ac2 Type 07 Len 0
[17179588.708000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[17179588.708000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 21 (level, high) -> IRQ 193
[17179588.708000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179588.728000] agpgart: Detected NVIDIA nForce2 chipset
[17179588.744000] agpgart: AGP aperture is 256M @ 0xc0000000
[17179588.768000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[17179588.768000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
[17179589.120000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179589.136000] parport: PnPBIOS parport detected.
[17179589.136000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179589.164000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1065
[17179589.164000] usbcore: registered new driver usblp
[17179589.164000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179589.184000] Floppy drive(s): fd0 is 1.44M
[17179589.204000] FDC 0 is a post-1991 82077
[17179589.232000] usbcore: registered new driver hiddev
[17179589.260000] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0[17179589.260000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179589.260000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[17179589.260000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-2
[17179589.260000] usbcore: registered new driver usbhid
[17179589.260000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179589.488000] ts: Compaq touchscreen protocol output
[17179589.548000] **** SET: Misaligned resource pointer: f74baba2 Type 07 Len 0
[17179589.548000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[17179589.548000] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 209
[17179589.548000] skge 1.5 addr 0xe4000000 irq 209 chip Yukon-Lite rev 7
[17179589.548000] skge eth1: addr 00:0e:a6:23:d3:76
[17179589.596000] **** SET: Misaligned resource pointer: f74baae2 Type 07 Len 0
[17179589.596000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[17179589.596000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 201
[17179589.596000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179589.704000] skge eth1: enabling interface
[17179589.920000] intel8x0_measure_ac97_clock: measured 56767 usecs
[17179589.920000] intel8x0: clocking to 48000
[17179590.344000] lp0: using parport0 (interrupt-driven).
[17179590.364000] sbp2: $Rev: 1306 $ Ben Collins
[17179590.364000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179590.364000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179590.428000] Adding 1951856k swap on /dev/hda7.  Priority:-1 extents:1 across:1951856k
[17179590.780000] NET: Registered protocol family 17
[17179590.932000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179590.932000] md: bitmap version 4.39
[17179591.444000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179591.456000] skge eth1: Link is up at 100 Mbps, full duplex, flow control tx and rx
[17179591.984000] cdrom: open failed.
[17179592.332000] cdrom: open failed.
[17179592.332000] cdrom: open failed.
[17179601.048000] ReiserFS: hda1: found reiserfs format "3.6" with standard journal
[17179601.192000] ReiserFS: hda1: using ordered data mode
[17179601.220000] ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179601.220000] ReiserFS: hda1: checking transaction log (hda1)
[17179601.284000] ReiserFS: hda1: Using r5 hash to sort names
[17179601.284000] ReiserFS: hda6: found reiserfs format "3.6" with standard journal
[17179601.288000] ReiserFS: hda6: using ordered data mode
[17179601.288000] ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179601.288000] ReiserFS: hda6: checking transaction log (hda6)
[17179601.288000] ReiserFS: hda6: Using r5 hash to sort names
[17179601.456000] NET: Registered protocol family 10
[17179601.456000] lo: Disabled Privacy Extensions
[17179601.456000] IPv6 over IPv4 tunneling driver
[17179602.504000] pcc_acpi: loading...
[17179602.520000] ACPI: Power Button (FF) [PWRF]
[17179602.520000] ACPI: Power Button (CM) [PWRB]
[17179602.572000] ibm_acpi: ec object not found
[17179606.544000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179606.544000] [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
[17179606.548000] [fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0[17179606.592000] **** SET: Misaligned resource pointer: f7a43e62 Type 07 Len 0
[17179606.592000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[17179606.592000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 217
[17179608.128000] [fglrx:firegl_unlock] *ERROR* Process 4505 using kernel context 0
[17179608.612000] ppdev: user-space parallel port driver
[17179609.028000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179609.028000] apm: overridden by ACPI.
[17179611.928000] eth1: no IPv6 routers present
[17179616.816000] Bluetooth: Core ver 2.8
[17179616.816000] NET: Registered protocol family 31
[17179616.816000] Bluetooth: HCI device and connection manager initialized
[17179616.816000] Bluetooth: HCI socket layer initialized
[17179616.984000] Bluetooth: L2CAP ver 2.8
[17179616.984000] Bluetooth: L2CAP socket layer initialized
[17179617.024000] Bluetooth: RFCOMM socket layer initialized
[17179617.024000] Bluetooth: RFCOMM TTY layer initialized
[17179617.024000] Bluetooth: RFCOMM ver 1.7
[17241513.880000] ohci_hcd 0000:00:02.0: wakeup
[17241514.264000] usb 1-3: new full speed USB device using ohci_hcd and address 2
[17241515.692000] Initializing USB Mass Storage driver...
[17241515.696000] scsi2 : SCSI emulation for USB Mass Storage devices
[17241515.696000] usb-storage: device found at 2
[17241515.696000] usb-storage: waiting for device to settle before scanning
[17241515.696000] usbcore: registered new driver usb-storage
[17241515.696000] USB Mass Storage support registered.
[17241520.704000]   Vendor: SigmaTel  Model: MSCN              Rev: 0100
[17241520.704000]   Type:   Direct-Access                      ANSI SCSI revision: 04
[17241520.724000] usb-storage: device scan complete
[17241520.800000] Driver 'sd' needs updating - please use bus_type methods
[17241520.808000] SCSI device sda: 1019648 512-byte hdwr sectors (522 MB)
[17241520.816000] sda: Write Protect is off
[17241520.816000] sda: Mode Sense: 03 00 00 00
[17241520.816000] sda: assuming drive cache: write through
[17241520.844000] SCSI device sda: 1019648 512-byte hdwr sectors (522 MB)
[17241520.848000] sda: Write Protect is off
[17241520.848000] sda: Mode Sense: 03 00 00 00
[17241520.852000] sda: assuming drive cache: write through
[17241520.852000]  sda: sda1
[17241520.860000] sd 2:0:0:0: Attached scsi removable disk sda
[17241520.892000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[17241522.132000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17241703.728000] usb 1-3: USB disconnect, address 2
[17241703.776000]  2:0:0:0: rejecting I/O to dead device
[17241703.776000] FAT: bread failed in fat_clusters_flush
merijn@Ubuntu:~$

----------------------
Tevens vind ik hier wel wat dingen over mijn fglrx probleem,waarschijnlijk moet ik die cleanen,en dan de nieuwere fglrx erin zetten,maar hoe weet ik niet,als het goed is zou het dan wel moeten werken met fglrxondersteuning.


Gr Merijn

Offline kennywest

  • Lid
    • http://kennywest.blogspot.com
  • Steunpunt: Nee
Bestaat er een Kernel repository voor Ubuntu of Kubuntu?
« Reactie #8 Gepost op: 2006/10/19, 17:21:22 »
Ik denk dat uw spelerke op sda1 zit:
[17241520.852000]  sda: sda1
[17241520.860000] sd 2:0:0:0: Attached scsi removable disk sda
[17241520.892000] sd 2:0:0:0: Attached scsi generic sg0 type 0

Dus normaal moet ie tevoorschijn komen op uw desktop. Anders doe je eens sudo mount /dev/sda1 /mnt. De inhoud van uw spelerke staat dan normaal gezien in /mnt.

Azalin

  • Gast
Bestaat er een Kernel repository voor Ubuntu of Kubuntu?
« Reactie #9 Gepost op: 2006/10/19, 23:30:27 »
Het gaat eigenlijk meer om dat de mp3speler niet g

Offline Samuel Rave

  • Lid
    • http://www.familie-rave.de/
  • Steunpunt: Nee
Bestaat er een Kernel repository voor Ubuntu of Kubuntu?
« Reactie #10 Gepost op: 2006/10/20, 15:50:55 »
Goh wat vervelend allemaal,
kheb geen van de problemen, en alle (diverse) MP3spelers die ik tot noch toe heb aangesloten deden het 'out of the box'...
sorry dus ik kan niet helpen.

Succes!