Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: IDT geluidskaart (chip)  (gelezen 949 keer)

tontok01

  • Gast
IDT geluidskaart (chip)
« Gepost op: 2009/06/14, 17:56:49 »
IDT gluidskaart (chip) Probleem

Hallo ben nieuwbie met ubuntu 9.04.
En vind het een goed en vooral een zeer snelle besturing.
Maar helaas na installatie blijkt dat ubuntu niet mijn geluidskaart te herkenen.
Het betreft hier een IDT onbaord die in een HP Pavilion dv7-2080ed Entertainment notebook zit.
Kan iemand mij in deze helpen?
Zou toch door willen gaan met het ontdekken van ubuntu.

MVG Ton
« Laatst bewerkt op: 2009/06/14, 18:04:20 door tontok01 »

Offline Johan van Dijk

  • Administrator
    • johanvandijk
  • Steunpunt: Nee
Re: IDT geluidskaart (chip)
« Reactie #1 Gepost op: 2009/06/14, 19:21:32 »
Welkom op het forum :)

Om je beter te kunnen helpen, hebben we wat meer informatie nodig.
Kan je een terminalvenster openen (toepassingen>hulpmiddelen>terminalvenster) en het volgende commando typen?
lspci -vvnn
Het resultaat wat je te zien krijgt kan je op het forum plaatsen, graag op deze manier:
[code]
hier je tekst
[/code]

tontok01

  • Gast
Re: IDT geluidskaart (chip)
« Reactie #2 Gepost op: 2009/06/14, 21:50:23 »
Hoi Johan

Hier onder alles wat ik te zie kreeg.

To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

ton@HP-laptop:~$ lspci -vvnn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: <access denied>
   Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
   I/O behind bridge: 00007000-00007fff
   Memory behind bridge: da000000-da0fffff
   Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 16
   Region 4: I/O ports at 80e0 [size=32]
   Capabilities: <access denied>
   Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin B routed to IRQ 21
   Region 4: I/O ports at 80c0 [size=32]
   Capabilities: <access denied>
   Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin D routed to IRQ 19
   Region 0: Memory at da105c00 (32-bit, non-prefetchable) [size=1K]
   Capabilities: <access denied>
   Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 22
   Region 0: Memory at da100000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: HDA Intel
   Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
   I/O behind bridge: 00006000-00006fff
   Memory behind bridge: d9000000-d9ffffff
   Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
   I/O behind bridge: 00005000-00005fff
   Memory behind bridge: d8000000-d8ffffff
   Prefetchable memory behind bridge: 00000000d1000000-00000000d1ffffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
   I/O behind bridge: 00004000-00004fff
   Memory behind bridge: d7000000-d7ffffff
   Prefetchable memory behind bridge: 00000000d2000000-00000000d2ffffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
   I/O behind bridge: 00003000-00003fff
   Memory behind bridge: d6000000-d6ffffff
   Prefetchable memory behind bridge: 00000000d3000000-00000000d3ffffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=07, subordinate=09, sec-latency=0
   I/O behind bridge: 00002000-00002fff
   Memory behind bridge: d5000000-d5ffffff
   Prefetchable memory behind bridge: 00000000d4000000-00000000d4ffffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 20
   Region 4: I/O ports at 80a0 [size=32]
   Capabilities: <access denied>
   Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin B routed to IRQ 19
   Region 4: I/O ports at 8080 [size=32]
   Capabilities: <access denied>
   Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin D routed to IRQ 16
   Region 4: I/O ports at 8060 [size=32]
   Capabilities: <access denied>
   Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin C routed to IRQ 18
   Region 4: I/O ports at 8040 [size=32]
   Capabilities: <access denied>
   Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 20
   Region 0: Memory at da105800 (32-bit, non-prefetchable) [size=1K]
   Capabilities: <access denied>
   Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01)
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=32
   Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: <access denied>
   Kernel modules: iTCO_wdt

00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin B routed to IRQ 2297
   Region 0: I/O ports at 8108 [size=8]
   Region 1: I/O ports at 8114
   Region 2: I/O ports at 8100 [size=8]
   Region 3: I/O ports at 8110
   Region 4: I/O ports at 8020 [size=32]
   Region 5: Memory at da105000 (32-bit, non-prefetchable) [size=2K]
   Capabilities: <access denied>
   Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin C routed to IRQ 11
   Region 0: Memory at da106000 (64-bit, non-prefetchable) [size=256]
   Region 4: I/O ports at 8000 [size=32]
   Kernel modules: i2c-i801

00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin C routed to IRQ 11
   Region 0: Memory at da104000 (64-bit, non-prefetchable) [size=4K]
   Capabilities: <access denied>

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M96 [Mobility Radeon HD 4650] [1002:9480]
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 11
   Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
   Region 1: I/O ports at 7000 [size=256]
   Region 2: Memory at da000000 (32-bit, non-prefetchable) [size=64K]
   Expansion ROM at da020000 [disabled] [size=128K]
   Capabilities: <access denied>

01:00.1 Audio device [0403]: ATI Technologies Inc R700 Audio Device [Radeon HD 4000 Series] [1002:aa38]
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin B routed to IRQ 17
   Region 0: Memory at da010000 (32-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: HDA Intel
   Kernel modules: snd-hda-intel

02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
   Subsystem: Hewlett-Packard Company Device [103c:1508]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at d9000000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: wl
   Kernel modules: wl

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 2296
   Region 0: I/O ports at 5000 [size=256]
   Region 2: Memory at d1010000 (64-bit, prefetchable) [size=4K]
   Region 4: Memory at d1000000 (64-bit, prefetchable) [size=64K]
   Expansion ROM at d1020000 [disabled] [size=64K]
   Capabilities: <access denied>
   Kernel driver in use: r8169
   Kernel modules: r8169

06:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technologies, Inc. IEEE 1394 Host Controller [197b:2380] (prog-if 10)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=2K]
   Region 1: Memory at d6000d00 (32-bit, non-prefetchable) [size=128]
   Region 4: Memory at d6000c80 (32-bit, non-prefetchable) [size=128]
   Region 5: Memory at d6000c00 (32-bit, non-prefetchable) [size=128]
   Capabilities: <access denied>
   Kernel driver in use: ohci1394
   Kernel modules: firewire-ohci, ohci1394

06:00.1 System peripheral [0880]: JMicron Technologies, Inc. SD/MMC Host Controller [197b:2382]
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at d6000b00 (32-bit, non-prefetchable) [size=256]
   Capabilities: <access denied>
   Kernel driver in use: sdhci-pci
   Kernel modules: sdhci-pci

06:00.2 SD Host controller [0805]: JMicron Technologies, Inc. Standard SD Host Controller [197b:2381] (prog-if 01)
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at d6000a00 (32-bit, non-prefetchable) [size=256]
   Capabilities: <access denied>
   Kernel modules: sdhci-pci

06:00.3 System peripheral [0880]: JMicron Technologies, Inc. MS Host Controller [197b:2383]
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 11
   Region 0: Memory at d6000900 (32-bit, non-prefetchable) [size=256]
   Capabilities: <access denied>

06:00.4 System peripheral [0880]: JMicron Technologies, Inc. xD Host Controller [197b:2384]
   Subsystem: Hewlett-Packard Company Device [103c:3624]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 11
   Region 0: Memory at d6000800 (32-bit, non-prefetchable) [size=256]
   Capabilities: <access denied>

ton@HP-laptop:~$


Hoop dat dit wat licht op de zaak geeft

Ton

Offline Johan van Dijk

  • Administrator
    • johanvandijk
  • Steunpunt: Nee
Re: IDT geluidskaart (chip)
« Reactie #3 Gepost op: 2009/06/15, 09:04:40 »
Zou je misschien je bericht aan willen passen?
Je moet boven de lap tekst even [code] zetten, en eronder [/code]. Dat maakt het een stuk leesbaarder :)

Zo te zien heb je een geluidskaart van Intel:
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
   Subsystem: Hewlett-Packard Company Device [103c:3624]

Die zou het eigenlijk gewoon moeten doen.
Zie je rechtsbovenin op je paneel een luidsprekertje staan? Klik er dan eens op met je rechtermuisknop en open de volumeregeling.
Staan alle schuifjes open en zijn alle kanalen ingeschakeld?
Klik ook op de voorkeuren en zet alle vinkjes aan. Hierna heb je in het eerdere scherm meerdere tabbladen en schuifjes. Hier moet je dan even mee spelen om te zien welke er nog open gezet moet worden.
Ik gok dat het een vinkje is voor de koptelefoon of digitale uitvoer, of iets dergelijks.

tontok01

  • Gast
Re: IDT geluidskaart (chip)
« Reactie #4 Gepost op: 2009/06/15, 13:26:08 »
Hoi Johan

Heb alles geprobeerd maar het blijft oorverdovend stil
Maar het gekke is dat de softwaere en de hardwaere ( lichtje op laptop}wel aangeeft dat de chip word aangesproken.
En o ja de biep van de laptop geeft nu wel geluid na dat ik het heb aan gezet.
En kan dze ook harder en zachter zetten.
Maar de laptop spiekers blijfen zwijgen.
Instelling, of laptop toch te nieuw??

Ton