Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: (OPGELOST)Probleem scherm  (gelezen 3024 keer)

driesy

  • Gast
(OPGELOST)Probleem scherm
« Gepost op: 2009/05/07, 20:17:45 »
Dag iedereen,
Ik wou mijn oude laptop nieuw leven inblazen door er ubuntu op te zetten, en alles werkt prima buiten 1 ding:

Ipv dat het gehele scherm gebruikt wordt, wordt enkel het centrale deel gebruikt waardoor er een zwarte band van ong. 5 cm rond verschijnt.
Bij Beelscherminstellingen is 800 x 600 de maximale resolutie, terwijl ik een scherm van 1024x768 heb. (http://img89.imageshack.us/img89/7700/schermafdruk1.png)

Ik heb al wat gegoogled, en heb gelijkaardige problemen gevonden en die aanraden om /etc/X11/xorg.conf aan te passen naar vanalles en nog wat. Ik heb een paar tips gevolgd, maar niets werkte en dan heb ik het bestand terug gezet naar het originele(via een backup).
Nu ziet het bestand er zo uit:
Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection

Iemand een idee ?
Alvast bedankt

P.S.: Ik ben nieuw in linux & ubuntu
« Laatst bewerkt op: 2009/05/11, 17:24:17 door driesy »

driesy

  • Gast
Re: Probleem scherm
« Reactie #1 Gepost op: 2009/05/07, 22:39:08 »
Ubuntu: uitgave 9.04 (jaunty)
              Kernal Linux 2.6.28-11-generic
              GNOME 2.26.1

Het gaat om deze (http://reviews.cnet.com/laptops/toshiba-satellite-pro-6100/4507-3121_7-20761325.html?tag=mncol;psum) laptop.
En ik weet niet welke videokaart ik heb, dus heb ik ook nog geen aparte drivers geinstalleerd.

Offline dvdmeer

  • Lid
    • Python-RandR :: dvdmeer.nl
  • Steunpunt: Nee
Re: Probleem scherm
« Reactie #2 Gepost op: 2009/05/07, 23:08:45 »
Volgens http://www.ciao-shopping.nl/Toshiba_Satellite_Pro_6100__273319 zit er deze kaart in:

NVIDIA GeForce4 420 Go AGP 4x

driesy

  • Gast
Re: Probleem scherm
« Reactie #3 Gepost op: 2009/05/08, 22:28:39 »
Bij Systeem > Beheer > Hardwarestuurprogramma's staat er enkel: softwaremodem

En hier is een copie van de lijst:
id:
dries-laptop
description: Notebook
product: SP6000
vendor: TOSHIBA
version: PS600E-03DFK-BE
serial: 32212438G
width: 32 bits
capabilities: smbios-2.3 dmi-2.3
configuration:
administrator_password = disabled
boot = normal
chassis = notebook
frontpanel_password = disabled
keyboard_password = disabled
power-on_password = disabled
uuid = E295BA00-31A0-11D6-8000-B3D032212438
id:
core
description: Motherboard
product: Portable PC
vendor: TOSHIBA
physical id:
0
version: Version A0
serial: 0000000000
id:
firmware
description: BIOS
vendor: TOSHIBA
physical id:
0
version: Version 1.30 (01/30/2002)
size: 128KiB
capacity: 448KiB
capabilities: isa pci pcmcia pnp apm upgrade shadowing vesa cdboot bootselect pcmciaboot edd int13floppytoshiba int13floppy720 int5printscreen int9keyboard int14serial int17printer acpi usb agp biosbootspecification netboot
id:
cpu
description: CPU
product: Intel(R) Pentium(R) III Mobile CPU 1066MHz
vendor: Intel Corp.
physical id:
4
bus info:
cpu@0
version: 6.11.1
slot: uFC-PGA2 Socket
size: 733MHz
capacity: 1066MHz
width: 32 bits
clock: 133MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse up cpufreq
id:
cache:0
description: L1 cache
physical id:
12
slot: CPU Internal
size: 32KiB
capacity: 32KiB
clock: 1GHz (1.0ns)
capabilities: internal write-back
id:
cache:1
description: L2 cache
physical id:
13
slot: CPU Internal
size: 512KiB
capacity: 512KiB
clock: 1GHz (1.0ns)
capabilities: internal write-back
id:
memory
description: System Memory
physical id:
81
slot: System board or motherboard
size: 256MiB
capacity: 1GiB
id:
bank:0
description: SODIMM SDRAM Synchronous
physical id:
0
slot: DIMM 0
size: 256MiB
width: 64 bits
id:
bank:1
description: SODIMM SDRAM Synchronous [empty]
physical id:
1
slot: DIMM 1
width: 64 bits
id:
pci
description: Host bridge
product: M1644/M1644T Northbridge+Trident
vendor: ALi Corporation
physical id:
100
bus info:
pci@0000:00:00.0
version: 01
width: 32 bits
clock: 33MHz
configuration:
driver = agpgart-ali
module = ali_agp
id:
pci
description: PCI bridge
product: PCI to AGP Controller
vendor: ALi Corporation
physical id:
1
bus info:
pci@0000:00:01.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci bus_master
id:
display
description: VGA compatible controller
product: CyberBlade XPAi1
vendor: Trident Microsystems
physical id:
0
bus info:
pci@0000:01:00.0
version: 82
width: 32 bits
clock: 66MHz
capabilities: agp agp-2.0 pm bus_master cap_list
configuration:
latency = 8
id:
usb
description: USB Controller
product: USB 1.1 Controller
vendor: ALi Corporation
physical id:
2
bus info:
pci@0000:00:02.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration:
driver = ohci_hcd
latency = 64
maxlatency = 80
id:
ide
description: IDE interface
product: M5229 IDE
vendor: ALi Corporation
physical id:
4
bus info:
pci@0000:00:04.0
logical name:
scsi0
logical name:
scsi1
version: c3
width: 32 bits
clock: 33MHz
capabilities: ide pm bus_master cap_list emulated
configuration:
driver = pata_ali
latency = 64
maxlatency = 4
mingnt = 2
module = pata_ali
id:
disk
description: ATA Disk
product: TOSHIBA MK2018GA
vendor: Toshiba
physical id:
0
bus info:
scsi@0:0.0.0
logical name:
/dev/sda
version: M1.4
serial: 22GB8810T
size: 18GiB (20GB)
capabilities: partitioned partitioned:dos
configuration:
ansiversion = 5
signature = d4986b99
id:
volume:0
description: EXT3 volume
vendor: Linux
physical id:
1
bus info:
scsi@0:0.0.0,1
logical name:
/dev/sda1
logical name:
/
version: 1.0
serial: 95062d3f-e05d-4c4e-89ec-ae8e7b652de7
size: 17GiB
capacity: 17GiB
capabilities: primary bootable journaled extended_attributes large_files recover ext3 ext2 initialized
configuration:
created = 2009-05-05 22:31:51
filesystem = ext3
modified = 2009-05-08 22:16:59
mount.fstype = ext3
mount.options = rw,relatime,errors=remount-ro,data=ordered
mounted = 2009-05-08 22:16:59
state = mounted
id:
volume:1
description: Extended partition
physical id:
2
bus info:
scsi@0:0.0.0,2
logical name:
/dev/sda2
size: 666MiB
capacity: 666MiB
capabilities: primary extended partitioned partitioned:extended
id:
logicalvolume
description: Linux swap / Solaris partition
physical id:
5
logical name:
/dev/sda5
capacity: 666MiB
capabilities: nofs
id:
cdrom
description: DVD reader
product: DVD-ROM SD-C2502
vendor: TOSHIBA
physical id:
1
bus info:
scsi@1:0.0.0
logical name:
/dev/cdrom
logical name:
/dev/dvd
logical name:
/dev/scd0
logical name:
/dev/sr0
version: 1313
capabilities: removable audio dvd
configuration:
ansiversion = 5
status = nodisc
id:
multimedia
description: Multimedia audio controller
product: M5451 PCI AC-Link Controller Audio Device
vendor: ALi Corporation
physical id:
6
bus info:
pci@0000:00:06.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration:
driver = ALI 5451
latency = 64
maxlatency = 24
mingnt = 2
module = snd_ali5451
id:
isa
description: ISA bridge
product: M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+]
vendor: ALi Corporation
physical id:
7
bus info:
pci@0000:00:07.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: isa pm bus_master cap_list
configuration:
latency = 0
id:
bridge
description: Bridge
product: M7101 Power Management Controller [PMU]
vendor: ALi Corporation
physical id:
8
bus info:
pci@0000:00:08.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: bridge
configuration:
driver = ali1535_smbus
latency = 0
module = i2c_ali1535
id:
network
description: Ethernet interface
product: 82557/8/9/0/1 Ethernet Pro 100
vendor: Intel Corporation
physical id:
a
bus info:
pci@0000:00:0a.0
logical name:
eth0
version: 0d
serial: 00:00:39:0d:f8:36
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration:
autonegotiation = on
broadcast = yes
driver = e100
driverversion = 3.5.23-k6-NAPI
duplex = half
firmware = N/A
latency = 64
link = no
maxlatency = 56
mingnt = 8
module = e100
multicast = yes
port = MII
speed = 10MB/s
id:
pcmcia:0
description: CardBus bridge
product: PCI1410 PC card Cardbus Controller
vendor: Texas Instruments
physical id:
10
bus info:
pci@0000:00:10.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration:
driver = yenta_cardbus
latency = 176
maxlatency = 5
mingnt = 64
module = yenta_socket
id:
network
description: Wireless LAN Card
product: Version 01.01
vendor: TOSHIBA
physical id:
0
slot: Socket 0
resources:
irq : 11
id:
pcmcia:1
description: CardBus bridge
product: ToPIC100 PCI to Cardbus Bridge with ZV Support
vendor: Toshiba America Info Systems
physical id:
11
bus info:
pci@0000:00:11.0
version: 32
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration:
driver = yenta_cardbus
latency = 0
maxlatency = 5
mingnt = 128
module = yenta_socket
id:
pcmcia:2
description: CardBus bridge
product: ToPIC100 PCI to Cardbus Bridge with ZV Support
vendor: Toshiba America Info Systems
physical id:
11.1
bus info:
pci@0000:00:11.1
version: 32
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration:
driver = yenta_cardbus
latency = 0
maxlatency = 5
mingnt = 128
module = yenta_socket
id:
system
description: System peripheral
product: SD TypA Controller
vendor: Toshiba America Info Systems
physical id:
12
bus info:
pci@0000:00:12.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm cap_list
configuration:
latency = 0
id:
battery
description: Lithium Ion Battery
product: R86F2R
vendor: TOSHIBA
physical id:
1
version: 09/23/05
serial: 0000000027
slot: 1st Battery
configuration:
voltage = 10.8V
id:
network:0
description: Wireless interface
physical id:
2
logical name:
eth1
serial: 00:02:2d:44:25:55
capabilities: ethernet physical wireless
configuration:
broadcast = yes
driver = orinoco
driverversion = 0.15
firmware = Lucent/Agere 6.14
ip = 192.168.0.133
link = yes
multicast = yes
wireless = IEEE 802.11b
id:
network:1
description: Ethernet interface
physical id:
3
logical name:
pan0
serial: 26:f6:98:5d:96:08
capabilities: ethernet physical
configuration:
broadcast = yes
driver = bridge
driverversion = 2.3
firmware = N/A
link = yes
multicast = yes



Alvast bedankt

Offline mrGee

  • Lid
  • Steunpunt: Nee
Re: Probleem scherm
« Reactie #4 Gepost op: 2009/05/11, 00:03:01 »
Hallo

Hier staat kennelijk een passende oplossing;


Open een terminal, of doe Alt+F2, en kopieer/plak het volgende daar;

    gksudo gedit /etc/X11/xorg.conf

zet het volgende er bij in; of kopieer/plak (wel even de oude waarden verwijderen of
een # ervoor zetten mbt. Section "Device"/ "Screen"/ "Monitor").

Section "Device"
  Identifier "Trident Microsystems CyberBlade XPAi1"
  Driver "trident"
  BusID "PCI:1:0:0"
EndSection

Section "Monitor"
  Identifier "Configured Monitor"
  Option "DPMS" "true"
  HorizSync 30.0-60.0
  VertRefresh 50.0-70.0
EndSection

Section "Screen"
  Identifier "Default Screen"
  Monitor "Configured Monitor"
  Device "Configured Video Device"
  DefaultDepth 24
  SubSection "Display"
  Depth 24
  Modes "1024x768" "800x600"
EndSubSection

EndSection 

Save de file en sluit die . Na een machine reboot heb je 1024x768 resolution
en zou je 3d acceleration ook moeten werken.

Het komt uit deze link;

http://kimharding.net/dual_boot/
Gevonden via; www.linux-on-laptops.com

Groeten Gerrit
-- = >  simplify if you can   -- = >

driesy

  • Gast
Re: Probleem scherm
« Reactie #5 Gepost op: 2009/05/11, 16:58:18 »
Ongeloofelijk bedankt !
Het werkt.
Na de reboot wel nog eens naar Systeem->Voorkeuren->Scherm moeten gaan en daar de resolutie aanpassen.
Maar nu is alles in orde.

Bedankt  :)

nancy

  • Gast
Probleem scherm toshiba tecra 8200 trident cyberblade xp
« Reactie #6 Gepost op: 2009/06/28, 21:48:30 »
Vanavond heb ik overal gezocht naar een oplossing.

Maar ik kan geen passende oplossing vinden voor mijn tecra 8200 met trident cyberblade xp video.
De resolutie volgens de fabrikant kan maximaal worden ingesteld op 1400 x 1,050 pixels.

Nu heb ik nog geen goede oplossing?

Iemand misschien?

Offline mrGee

  • Lid
  • Steunpunt: Nee
Re: (OPGELOST)Probleem scherm
« Reactie #7 Gepost op: 2009/06/28, 22:41:09 »
Hallo nancy,

allereerst welkom, je kunt beter even in de door jouw gestarte andere topic
verder gaan. Aangezien deze voor de originele vragensteller al opgelost
is. Dat werkt anders verwarrend.

Groeten Gerrit
-- = >  simplify if you can   -- = >