Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: USB-stick  (gelezen 2725 keer)

Offline ludoke

  • Lid
  • Steunpunt: Nee
USB-stick
« Gepost op: 2008/04/19, 18:05:05 »
Hallo,

Ik probeer voor de eerste keer een USB-stick maar ik kan hem nergens niet vinden.
Waar moet ik zoeken? Ik heb hem pas nog geformateerd op FAT-32 om zeker te zijn.
(op mijn andere PC )
Ik werk met gutsy gibbon.

Groet
Ludo

Offline tabasco

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #1 Gepost op: 2008/04/19, 18:34:22 »
Als je een usb stick op een 'ander OS' gebruikt, zorg ervoor dat je de stick veilig verwijderd. (In windows gaat dit dmv het icoon in de taakbalk).
Ubuntu geeft problemen als je stick niet veilig is verwijderd.

Om te zien wat er aan usb is aangesloten kun je het volgende commando geven in een terminal venster:
lsusbVlak nadat je de stick hebt aangesloten kun je het volgende commando geven om fouten op te sporen:
dmesgDeze uitkomsten kun je hier plaatsen voor verdere hulp hier.

Offline ludoke

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #2 Gepost op: 2008/04/20, 10:16:18 »
Dank je, hier zijn de resultaten.

Wat doe ik hier verder mee?
ludo@ludo-2008:~$ lsusb
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 002: ID 046d:c018 Logitech, Inc.
Bus 001 Device 001: ID 0000:0000  
ludo@ludo-2008:~$

[    0.320000] Initializing CPU#1
[    0.400000] Calibrating delay using timer specific routine.. 5424.59 BogoMIPS (lpj=10849191)
[    0.400000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
[    0.400000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.400000] CPU: L2 Cache: 512K (64 bytes/line)
[    0.400000] CPU 1(2) -> Core 1
[    0.400000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
[    0.400000] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
[    0.400000] Total of 2 processors activated (10854.42 BogoMIPS).
[    0.400000] Brought up 2 CPUs
[    0.452000] migration_cost=4000
[    0.452000] Booting paravirtualized kernel on bare hardware
[    0.452000] Time:  8:05:50  Date: 03/20/108
[    0.452000] NET: Registered protocol family 16
[    0.452000] EISA bus registered
[    0.452000] ACPI: bus type pci registered
[    0.452000] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[    0.452000] PCI: Using configuration type 1
[    0.452000] Setting up standard PCI resources
[    0.460000] ACPI: EC: Look up EC in DSDT
[    0.464000] ACPI: Interpreter enabled
[    0.464000] ACPI: (supports S0 S1 S3 S4 S5)
[    0.464000] ACPI: Using PIC for interrupt routing
[    0.468000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.468000] PCI: Probing PCI hardware (bus 00)
[    0.472000] PCI: Transparent bridge - 0000:00:04.0
[    0.472000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.472000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.472000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.472000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[    0.472000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[    0.476000] ACPI: PCI Interrupt Link [LNKA] (IRQs 7 10 11 14) *0, disabled.
[    0.476000] ACPI: PCI Interrupt Link [LNKB] (IRQs 7 10 11 14) *0, disabled.
[    0.476000] ACPI: PCI Interrupt Link [LNKC] (IRQs 7 10 11 14) *0, disabled.
[    0.476000] ACPI: PCI Interrupt Link [LNKD] (IRQs 7 10 11 14) *0, disabled.
[    0.476000] ACPI: PCI Interrupt Link [LNEA] (IRQs 7 10 11 14) *0, disabled.
[    0.476000] ACPI: PCI Interrupt Link [LNEB] (IRQs 7 10 11 14) *0, disabled.
[    0.476000] ACPI: PCI Interrupt Link [LNEC] (IRQs 7 10 11 14) *0, disabled.
[    0.476000] ACPI: PCI Interrupt Link [LNED] (IRQs 7 10 11 14) *0, disabled.
[    0.476000] ACPI: PCI Interrupt Link [LUB0] (IRQs 7 10 *11 14)
[    0.476000] ACPI: PCI Interrupt Link [LUB2] (IRQs 7 *10 11 14)
[    0.476000] ACPI: PCI Interrupt Link [LMAC] (IRQs 7 10 *11 14)
[    0.476000] ACPI: PCI Interrupt Link [LAZA] (IRQs 7 10 *11 14)
[    0.476000] ACPI: PCI Interrupt Link [LACI] (IRQs 7 10 11 14) *0, disabled.
[    0.476000] ACPI: PCI Interrupt Link [LMC9] (IRQs 7 10 *11 14)
[    0.476000] ACPI: PCI Interrupt Link [LSMB] (IRQs 7 *10 11 14)
[    0.480000] ACPI: PCI Interrupt Link [LPMU] (IRQs 7 10 11 14) *0, disabled.
[    0.480000] ACPI: PCI Interrupt Link [LSA0] (IRQs *15)
[    0.480000] ACPI: PCI Interrupt Link [LSA1] (IRQs 5) *0, disabled.
[    0.480000] ACPI: PCI Interrupt Link [LATA] (IRQs 7 10 11 14) *0, disabled.
[    0.480000] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.480000] pnp: PnP ACPI init
[    0.480000] ACPI: bus type pnp registered
[    0.484000] pnp: PnP ACPI: found 15 devices
[    0.484000] ACPI: ACPI bus type pnp unregistered
[    0.484000] PnPBIOS: Disabled by ACPI PNP
[    0.484000] PCI: Using ACPI for IRQ routing
[    0.484000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.488000] NET: Registered protocol family 8
[    0.488000] NET: Registered protocol family 20
[    0.488000] pnp: 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[    0.488000] pnp: 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
[    0.488000] pnp: 00:07: iomem range 0xfee01000-0xfeefffff could not be reserved
[    0.488000] pnp: 00:07: iomem range 0xffb80000-0xffffffff could not be reserved
[    0.488000] pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.488000] pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.488000] pnp: 00:09: iomem range 0x38000000-0x3fffffff has been reserved
[    0.488000] pnp: 00:0b: ioport range 0x230-0x23f has been reserved
[    0.488000] pnp: 00:0b: ioport range 0x290-0x29f has been reserved
[    0.488000] pnp: 00:0b: ioport range 0xa00-0xa0f has been reserved
[    0.488000] pnp: 00:0b: ioport range 0xa10-0xa1f has been reserved
[    0.488000] pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[    0.488000] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    0.488000] pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[    0.488000] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[    0.488000] pnp: 00:0e: iomem range 0x100000-0x37ffffff could not be reserved
[    0.492000] Time: hpet clocksource has been installed.
[    0.492000] Switched to high resolution mode on CPU 0
[    0.492000] Switched to high resolution mode on CPU 1
[    0.520000] PCI: Bridge: 0000:00:04.0
[    0.520000]   IO window: disabled.
[    0.520000]   MEM window: disabled.
[    0.520000]   PREFETCH window: disabled.
[    0.520000] PCI: Bridge: 0000:00:09.0
[    0.520000]   IO window: disabled.
[    0.520000]   MEM window: disabled.
[    0.520000]   PREFETCH window: disabled.
[    0.520000] PCI: Bridge: 0000:00:0b.0
[    0.520000]   IO window: disabled.
[    0.520000]   MEM window: disabled.
[    0.520000]   PREFETCH window: disabled.
[    0.520000] PCI: Bridge: 0000:00:0c.0
[    0.520000]   IO window: disabled.
[    0.520000]   MEM window: disabled.
[    0.520000]   PREFETCH window: disabled.
[    0.520000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[    0.520000] PCI: Setting latency timer of device 0000:00:09.0 to 64
[    0.520000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    0.520000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.520000] NET: Registered protocol family 2
[    0.568000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.568000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[    0.568000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.568000] TCP: Hash tables configured (established 131072 bind 65536)
[    0.568000] TCP reno registered
[    0.584000] checking if image is initramfs... it is
[    1.000000] Freeing initrd memory: 7059k freed
[    1.000000] audit: initializing netlink socket (disabled)
[    1.000000] audit(1208678750.992:1): initialized
[    1.004000] VFS: Disk quotas dquot_6.5.1
[    1.004000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.004000] io scheduler noop registered
[    1.004000] io scheduler anticipatory registered
[    1.004000] io scheduler deadline registered
[    1.004000] io scheduler cfq registered (default)
[    1.428000] Boot video device is 0000:00:0d.0
[    1.428000] PCI: Setting latency timer of device 0000:00:09.0 to 64
[    1.428000] assign_interrupt_mode Found MSI capability
[    1.428000] Allocate Port Service[0000:00:09.0:pcie00]
[    1.428000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    1.428000] assign_interrupt_mode Found MSI capability
[    1.428000] Allocate Port Service[0000:00:0b.0:pcie00]
[    1.428000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    1.428000] assign_interrupt_mode Found MSI capability
[    1.428000] Allocate Port Service[0000:00:0c.0:pcie00]
[    1.428000] isapnp: Scanning for PnP cards...
[    1.780000] isapnp: No Plug & Play device found
[    1.800000] Real Time Clock Driver v1.12ac
[    1.800000] hpet_resources: 0xfed00000 is busy
[    1.800000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.800000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.800000] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.800000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.800000] input: Macintosh mouse button emulation as /class/input/input0
[    1.800000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.800000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[    1.800000] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.800000] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.800000] mice: PS/2 mouse device common for all mice
[    1.800000] EISA: Probing bus 0 at eisa.0
[    1.800000] EISA: Detected 0 cards.
[    1.800000] TCP cubic registered
[    1.800000] NET: Registered protocol family 1
[    1.800000] Using IPI No-Shortcut mode
[    1.800000]   Magic number: 4:848:68
[    1.800000] Freeing unused kernel memory: 364k freed
[    1.816000] input: AT Translated Set 2 keyboard as /class/input/input1
[    2.944000] AppArmor: AppArmor initialized<5>audit(1208678752.492:2):  type=1505 info="AppArmor initialized" pid=1223
[    2.952000] fuse init (API version 7.8)
[    2.952000] Failure registering capabilities with primary security module.
[    3.316000] usbcore: registered new interface driver usbfs
[    3.316000] usbcore: registered new interface driver hub
[    3.316000] usbcore: registered new device driver usb
[    3.316000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.316000] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
[    3.316000] PCI: setting IRQ 11 as level-triggered
[    3.316000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 11 (level, low) -> IRQ 11
[    3.316000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[    3.316000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    3.316000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    3.316000] ohci_hcd 0000:00:02.0: irq 11, io mem 0xdffff000
[    3.328000] SCSI subsystem initialized
[    3.332000] libata version 2.21 loaded.
[    3.384000] usb usb1: configuration #1 chosen from 1 choice
[    3.384000] hub 1-0:1.0: USB hub found
[    3.384000] hub 1-0:1.0: 8 ports detected
[    3.384000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[    3.400000] Floppy drive(s): fd0 is 1.44M
[    3.416000] FDC 0 is a post-1991 82077
[    3.488000] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
[    3.488000] PCI: setting IRQ 10 as level-triggered
[    3.488000] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LUB2] -> GSI 10 (level, low) -> IRQ 10
[    3.488000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[    3.488000] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    3.488000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[    3.488000] ehci_hcd 0000:00:02.1: debug port 1
[    3.488000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[    3.488000] ehci_hcd 0000:00:02.1: irq 10, io mem 0xdfffec00
[    3.488000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.488000] usb usb2: configuration #1 chosen from 1 choice
[    3.488000] hub 2-0:1.0: USB hub found
[    3.488000] hub 2-0:1.0: 8 ports detected
[    3.592000] sata_nv 0000:00:08.0: version 3.4
[    3.592000] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
[    3.592000] PCI: setting IRQ 15 as level-triggered
[    3.592000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 15 (level, low) -> IRQ 15
[    3.592000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[    3.592000] scsi0 : sata_nv
[    3.592000] scsi1 : sata_nv
[    3.592000] ata1: SATA max UDMA/133 cmd 0x0001e400 ctl 0x0001e082 bmdma 0x0001d880 irq 15
[    3.592000] ata2: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d888 irq 15
[    3.592000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    3.592000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    4.060000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.068000] ata1.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133
[    4.068000] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    4.084000] ata1.00: configured for UDMA/133
[    4.136000] usb 1-1: new low speed USB device using ohci_hcd and address 2
[    4.348000] usb 1-1: configuration #1 chosen from 1 choice
[    4.356000] usbcore: registered new interface driver hiddev
[    4.360000] input: Logitech USB Optical Mouse as /class/input/input2
[    4.360000] input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:02.0-1
[    4.360000] usbcore: registered new interface driver usbhid
[    4.360000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    4.396000] ata2: SATA link down (SStatus 0 SControl 300)
[    4.404000] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[    4.404000] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
[    4.404000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
[    4.404000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[    4.404000] forcedeth: using HIGHDMA
[    4.412000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    4.412000] sd 0:0:0:0: [sda] Write Protect is off
[    4.412000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.412000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.412000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    4.412000] sd 0:0:0:0: [sda] Write Protect is off
[    4.412000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.412000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.412000]  sda: sda1 sda2 sda3
[    4.436000] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.440000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.576000] Attempting manual resume
[    4.576000] swsusp: Resume From Partition 8:2
[    4.576000] PM: Checking swsusp image.
[    4.576000] PM: Resume from disk failed.
[    4.616000] kjournald starting.  Commit interval 5 seconds
[    4.616000] EXT3-fs: mounted filesystem with ordered data mode.
[    4.924000] eth0: forcedeth.c: subsystem: 01043:8234 bound to 0000:00:07.0
[    4.924000] NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0
[    4.924000] NFORCE-MCP61: chipset revision 162
[    4.924000] NFORCE-MCP61: not 100% native mode: will probe irqs later
[    4.924000] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
[    4.924000]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[    4.924000] Probing IDE interface ide0...
[    5.660000] hda: TSSTcorpCD/DVDW SH-W162C, ATAPI CD/DVD-ROM drive
[    6.336000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    9.220000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    9.224000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.280000] parport_pc 00:06: reported by Plug and Play ACPI
[    9.280000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    9.356000] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
[    9.356000] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
[    9.380000] Linux agpgart interface v0.102 (c) Dave Jones
[    9.396000] input: PC Speaker as /class/input/input3
[    9.416000] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[    9.416000] Uniform CD-ROM driver Revision: 3.20
[    9.496000] nvidia: module license 'NVIDIA' taints kernel.
[    9.748000] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 11
[    9.748000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LMC9] -> GSI 11 (level, low) -> IRQ 11
[    9.748000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[    9.748000] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
[    9.892000] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
[    9.892000] ACPI: PCI Interrupt 0000:00:05.0[b] -> Link [LAZA] -> GSI 11 (level, low) -> IRQ 11
[    9.892000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   10.100000] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[   10.360000] lp0: using parport0 (interrupt-driven).
[   10.424000] Adding 1984016k swap on /dev/sda2.  Priority:-1 extents:1 across:1984016k
[   10.764000] EXT3 FS on sda1, internal journal
[   11.244000] kjournald starting.  Commit interval 5 seconds
[   11.244000] EXT3 FS on sda3, internal journal
[   11.244000] EXT3-fs: mounted filesystem with ordered data mode.
[   13.116000] input: Power Button (FF) as /class/input/input4
[   13.116000] ACPI: Power Button (FF) [PWRF]
[   13.120000] input: Power Button (CM) as /class/input/input5
[   13.120000] ACPI: Power Button (CM) [PWRB]
[   13.168000] No dock devices found.
[   13.432000] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ processors (version 2.00.00)
[   13.432000] powernow-k8: MP systems not supported by PSB BIOS structure
[   13.432000] powernow-k8: MP systems not supported by PSB BIOS structure
[   14.020000] Failure registering capabilities with primary security module.
[   14.156000] ppdev: user-space parallel port driver
[   14.300000] NET: Registered protocol family 10
[   14.300000] lo: Disabled Privacy Extensions
[   14.360000] audit(1208678763.721:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4882 profile="/usr/sbin/cupsd"
[   14.388000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   14.388000] apm: disabled - APM is not SMP safe.
[   14.552000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   14.616000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   14.620000] NFSD: starting 90-second grace period
[   15.304000] Bluetooth: Core ver 2.11
[   15.304000] NET: Registered protocol family 31
[   15.304000] Bluetooth: HCI device and connection manager initialized
[   15.304000] Bluetooth: HCI socket layer initialized
[   15.308000] Bluetooth: L2CAP ver 2.8
[   15.308000] Bluetooth: L2CAP socket layer initialized
[   15.312000] Bluetooth: RFCOMM socket layer initialized
[   15.312000] Bluetooth: RFCOMM TTY layer initialized
[   15.312000] Bluetooth: RFCOMM ver 1.8
[   19.460000] NET: Registered protocol family 17
[   32.768000] eth0: no IPv6 routers present
[  144.524000] usb 2-6: new high speed USB device using ehci_hcd and address 3
[  145.396000] hub 2-0:1.0: Cannot enable port 6.  Maybe the USB cable is bad?
[  145.508000] usb 2-6: new high speed USB device using ehci_hcd and address 4
[  146.380000] hub 2-0:1.0: Cannot enable port 6.  Maybe the USB cable is bad?
[  146.492000] usb 2-6: new high speed USB device using ehci_hcd and address 5
[  146.900000] usb 2-6: device not accepting address 5, error -71
[  147.012000] usb 2-6: new high speed USB device using ehci_hcd and address 6
[  147.420000] usb 2-6: device not accepting address 6, error -71
[  247.960000] usb 2-6: new high speed USB device using ehci_hcd and address 7
[  248.832000] hub 2-0:1.0: Cannot enable port 6.  Maybe the USB cable is bad?
[  248.944000] usb 2-6: new high speed USB device using ehci_hcd and address 8
[  249.816000] hub 2-0:1.0: Cannot enable port 6.  Maybe the USB cable is bad?
[  249.928000] usb 2-6: new high speed USB device using ehci_hcd and address 9
[  250.336000] usb 2-6: device not accepting address 9, error -71
[  250.448000] usb 2-6: new high speed USB device using ehci_hcd and address 10
[  250.856000] usb 2-6: device not accepting address 10, error -71
[  503.436000] usb 2-6: new high speed USB device using ehci_hcd and address 11
[  504.308000] hub 2-0:1.0: Cannot enable port 6.  Maybe the USB cable is bad?
[  504.420000] usb 2-6: new high speed USB device using ehci_hcd and address 12
[  505.292000] hub 2-0:1.0: Cannot enable port 6.  Maybe the USB cable is bad?
[  505.404000] usb 2-6: new high speed USB device using ehci_hcd and address 13
[  505.812000] usb 2-6: device not accepting address 13, error -71
[  505.924000] usb 2-6: new high speed USB device using ehci_hcd and address 14
[  506.332000] usb 2-6: device not accepting address 14, error -71
ludo@ludo-2008:~$
moderator edit: de output in code tags gezet

Offline ludoke

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #3 Gepost op: 2008/04/20, 10:23:46 »
Ik kan mijn USB-stick trouwens ook niet vinden met G-parted.
Misschien heeft die wel een hardware fout.

Offline vanadium

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #4 Gepost op: 2008/04/20, 13:48:44 »
Voor zover ik er iets van ken, wordt de USB inderdaad niet correct aangesloten/herkend. Dat kan op een hardwarefout wijzen. Kan de USB zijn, kan een kabel zijn, kan een USB poort zijn. Sluit je hem rechtstreeks op een USB aansluiting van de PC aan of via een kabel? Probeer eens andere USB poorten van je PC. Probeer hem aan te sluiten op andere systemen.

Offline ludoke

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #5 Gepost op: 2008/04/20, 17:55:24 »
Het is een USB-stick, dus zonder kabel.
Op een windows PC werkt die normaal.
Andere zaken heb ik al aangesloten via deze USB poort en die werken ook normaal, dus ik weet het niet zo goed meer.

Offline tabasco

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #6 Gepost op: 2008/04/20, 18:45:05 »
Zit de usb poort waar je op aansluit in je computer of is het een externe, buiten je computer kast? Probeer eens te wisselen met een andere poort.

Offline ludoke

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #7 Gepost op: 2008/04/20, 20:13:27 »
Ik heb een andere USB-stick van mijn dochter en die loopt normaal. In Vfat.
Raar dat de mijne  op windows wel gaat.
Ik zal een andere moeten kopen.
Bedankt voor jullie tijd.

Offline Gandyman

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #8 Gepost op: 2008/04/20, 20:31:05 »
Een andere kopen zal hetzelfde resultaat geven bij je vrees ik. ??

Ik zie namelijk niet dat je geantwoord hebt op tabasco zijn vraag. ??
Citaat
Als je een usb stick op een 'ander OS' gebruikt, zorg ervoor dat je de stick veilig verwijderd. (In windows gaat dit dmv het icoon in de taakbalk).
Indien je opslag media gebruikt anders dan EXT2 of EXT3 welke speciaal voor Linux is, zul je die andere Opslag media netjes afkoppelen.

Dus indien je een NTFS,  FAT of anders geformateerde file structuur wilt gebruiken in Ubuntu/Linux en er is geen stopbit gezet zul je het zien verschijnen in Ubuntu/Linux.

Je dus netjes "uitwerpen" of "afkoppelen" of hoe dat ook heet in windo, anders word er geen stopbit gezet en kan je er nix meer mee in een ander soort OS.

Ditzelfde fenomeen zal je zien indien je een dualboot hebt en je windo crasht.
Wanneer je dan Ubuntu opstart zul je ook alle partities die je eerst zag niet meer zien omdat er geen stopbit is gezet.
I don't suffer from insanity, I enjoy every minute of it.
Microsoft geeft je een raam, Linux geeft je een heel huis :D

Offline Pjotr

  • Lid
    • http://sites.google.com/site/computertip
  • Steunpunt: Nee
USB-stick
« Reactie #9 Gepost op: 2008/04/20, 20:34:24 »
Ik denk inderdaad, dat het probleem is, dat de USB-staaf in Windows niet "veilig is verwijderd" (softwarematig ontkoppeld). Windows schrijft een stopcode bij "veilig verwijderen", en die heeft Linux nodig.

Oplossing: start Windows op, stop de USB-staaf erin, doe dit keer wel "veilig verwijderen" en trek dan de USB-staaf er weer uit.

Start nu Linux en steek de USB-staaf erin. Waarschijnlijk is er nu geen enkel probleem.

Offline Max van Dongen

  • Lid
    • Plink Stairway site (band)
  • Steunpunt: Nee
USB-stick
« Reactie #10 Gepost op: 2008/04/20, 21:23:28 »
ik heb ook ff dmesg gedaan en ik heb het idee dat er wat foutjes in ziten
kunnen jullie er ff naar kijke?
[    0.000000] ACPI: SSDT 1F6E47F2, 01FB (r1  PmRef    CpuPm     3000 INTL 20030224)
[    0.000000] ACPI: DMI detected: Acer
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:13 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
[    0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127731
[    0.000000] Kernel command line: root=UUID=92d1d880-f8da-4116-8a14-ebfd4cf68f23 ro quiet splash locale=nl_NL
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 1795.716 MHz processor.
[    5.423243] Console: colour VGA+ 80x25
[    5.423250] console [tty0] enabled
[    5.423450] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    5.423688] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    5.435418] Memory: 498068k/514944k available (2164k kernel code, 16260k reserved, 1007k data, 364k init, 0k highmem)
[    5.435426] virtual kernel memory layout:
[    5.435427]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[    5.435428]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    5.435429]     vmalloc : 0xe0000000 - 0xff7fe000   ( 503 MB)
[    5.435431]     lowmem  : 0xc0000000 - 0xdf6e0000   ( 502 MB)
[    5.435432]       .init : 0xc041f000 - 0xc047a000   ( 364 kB)
[    5.435433]       .data : 0xc031d1bd - 0xc0418dc4   (1007 kB)
[    5.435434]       .text : 0xc0100000 - 0xc031d1bd   (2164 kB)
[    5.435438] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[    5.435480] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[    5.515477] Calibrating delay using timer specific routine.. 3595.37 BogoMIPS (lpj=7190742)
[    5.515506] Security Framework initialized
[    5.515515] SELinux:  Disabled at boot.
[    5.515532] AppArmor: AppArmor initialized
[    5.515536] Failure registering capabilities with primary security module.
[    5.515545] Mount-cache hash table entries: 512
[    5.515683] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[    5.515698] CPU: L1 I cache: 32K, L1 D cache: 32K
[    5.515701] CPU: L2 cache: 2048K
[    5.515704] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
[    5.515713] Compat vDSO mapped to ffffe000.
[    5.515726] Checking 'hlt' instruction... OK.
[    5.531866] SMP alternatives: switching to UP code
[    5.533755] Freeing SMP alternatives: 11k freed
[    5.533864] Early unpacking initramfs... done
[    5.892259] ACPI: Core revision 20070126
[    5.892333] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[    5.895449] CPU0: Intel(R) Pentium(R) M processor 1.80GHz stepping 08
[    5.895473] Total of 1 processors activated (3595.37 BogoMIPS).
[    5.895665] ENABLING IO-APIC IRQs
[    5.895861] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    6.043323] Brought up 1 CPUs
[    6.043354] CPU0 attaching sched-domain:
[    6.043356]  domain 0: span 01
[    6.043358]   groups: 01
[    6.043527] net_namespace: 64 bytes
[    6.043535] Booting paravirtualized kernel on bare hardware
[    6.043991] Time:  9:16:58  Date: 04/20/08
[    6.044041] NET: Registered protocol family 16
[    6.044234] EISA bus registered
[    6.044260] ACPI: bus type pci registered
[    6.044806] PCI: PCI BIOS revision 2.10 entry at 0xfd6fe, last bus=6
[    6.044809] PCI: Using configuration type 1
[    6.044811] Setting up standard PCI resources
[    6.054799] ACPI: EC: Look up EC in DSDT
[    6.056142] ACPI: Interpreter enabled
[    6.056145] ACPI: (supports S0 S3 S4 S5)
[    6.056157] ACPI: Using IOAPIC for interrupt routing
[    6.057965] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    6.095303] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    6.095306] ACPI: EC: driver started in interrupt mode
[    6.095342] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    6.096066] Force enabled HPET at base address 0xfed00000
[    6.096072] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    6.096077] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[    6.096509] PCI: Transparent bridge - 0000:00:1e.0
[    6.096582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    6.096879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    6.100917] ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11)
[    6.100996] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[    6.101072] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[    6.101148] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
[    6.101223] ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11)
[    6.101300] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
[    6.101376] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[    6.101452] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
[    6.101553] Linux Plug and Play Support v0.97 (c) Adam Belay
[    6.101585] pnp: PnP ACPI init
[    6.101591] ACPI: bus type pnp registered
[    6.111769] pnp: PnP ACPI: found 8 devices
[    6.111771] ACPI: ACPI bus type pnp unregistered
[    6.111775] PnPBIOS: Disabled by ACPI PNP
[    6.111962] PCI: Using ACPI for IRQ routing
[    6.111964] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    6.139249] NET: Registered protocol family 8
[    6.139251] NET: Registered protocol family 20
[    6.139402] hpet clockevent registered
[    6.139410] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    6.139413] hpet0: 3 64-bit timers, 14318180 Hz
[    6.140454] AppArmor: AppArmor Filesystem Enabled
[    6.143241] Time: tsc clocksource has been installed.
[    6.151271] system 00:04: ioport range 0x800-0x80f has been reserved
[    6.151274] system 00:04: ioport range 0x1000-0x107f has been reserved
[    6.151276] system 00:04: ioport range 0x1180-0x11bf has been reserved
[    6.151279] system 00:04: ioport range 0x1200-0x1200 has been reserved
[    6.151282] system 00:04: ioport range 0x1204-0x1204 has been reserved
[    6.151285] system 00:04: iomem range 0xe0000000-0xefffffff could not be reserved
[    6.151288] system 00:04: iomem range 0xf0000000-0xf0003fff could not be reserved
[    6.151291] system 00:04: iomem range 0xf0004000-0xf0004fff could not be reserved
[    6.151294] system 00:04: iomem range 0xf0005000-0xf0005fff could not be reserved
[    6.151297] system 00:04: iomem range 0xf0008000-0xf000bfff could not be reserved
[    6.151300] system 00:04: iomem range 0xfec18000-0xfec180ff has been reserved
[    6.151303] system 00:04: iomem range 0xfed20000-0xfed8ffff could not be reserved
[    6.181673] PCI: Bus 7, cardbus bridge: 0000:06:09.0
[    6.181675]   IO window: 00003400-000034ff
[    6.181681]   IO window: 00003800-000038ff
[    6.181686]   PREFETCH window: 34000000-37ffffff
[    6.181691]   MEM window: 38000000-3bffffff
[    6.181696] PCI: Bridge: 0000:00:1e.0
[    6.181699]   IO window: 3000-3fff
[    6.181705]   MEM window: b0100000-b01fffff
[    6.181709]   PREFETCH window: disabled.
[    6.181728] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    6.181749] ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 22 (level, low) -> IRQ 16
[    6.181762] NET: Registered protocol family 2
[    6.219269] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    6.219454] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    6.219555] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    6.219654] TCP: Hash tables configured (established 16384 bind 16384)
[    6.219657] TCP reno registered
[    6.231314] checking if image is initramfs... it is
[    6.643049] Switched to high resolution mode on CPU 0
[    6.932823] Freeing initrd memory: 7700k freed
[    6.933069] Simple Boot Flag at 0x37 set to 0x1
[    6.933499] audit: initializing netlink socket (disabled)
[    6.933520] audit(1208683018.392:1): initialized
[    6.935565] VFS: Disk quotas dquot_6.5.1
[    6.935649] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    6.935796] io scheduler noop registered
[    6.935799] io scheduler anticipatory registered
[    6.935801] io scheduler deadline registered
[    6.935813] io scheduler cfq registered (default)
[    6.935828] Boot video device is 0000:00:02.0
[    6.936274] isapnp: Scanning for PnP cards...
[    7.290365] isapnp: No Plug & Play device found
[    7.316378] Real Time Clock Driver v1.12ac
[    7.316486] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    7.317072] ACPI: PCI Interrupt 0000:00:1e.3[b] -> GSI 21 (level, low) -> IRQ 17
[    7.317082] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[    7.317688] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    7.317759] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    7.317847] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    7.318164] i8042.c: Detected active multiplexing controller, rev 1.1.
[    7.318232] serio: i8042 KBD port at 0x60,0x64 irq 1
[    7.318236] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    7.318238] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    7.318241] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    7.318243] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    7.322842] mice: PS/2 mouse device common for all mice
[    7.322959] EISA: Probing bus 0 at eisa.0
[    7.322966] Cannot allocate resource for EISA slot 1
[    7.322969] Cannot allocate resource for EISA slot 2
[    7.322971] Cannot allocate resource for EISA slot 3
[    7.322991] EISA: Detected 0 cards.
[    7.322996] cpuidle: using governor ladder
[    7.322998] cpuidle: using governor menu
[    7.323094] NET: Registered protocol family 1
[    7.323124] Using IPI No-Shortcut mode
[    7.323159] registered taskstats version 1
[    7.323272]   Magic number: 4:163:273
[    7.323294]   hash matches device ttyy1
[    7.323366]   hash matches device tty10
[    7.323370]   hash matches device lo
[    7.323385] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    7.323387] EDD information not available.
[    7.323630] Freeing unused kernel memory: 364k freed
[    7.325922] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    8.523912] fuse init (API version 7.9)
[    8.543859] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    8.543864] ACPI: Processor [CPU0] (supports 8 throttling states)
[    8.543877] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[    8.548037] ACPI: Thermal Zone [TZS0] (27 C)
[    8.549134] ACPI: Thermal Zone [TZS1] (30 C)
[    8.638024] Clocksource tsc unstable (delta = -71261884 ns)
[    8.642015] Time: hpet clocksource has been installed.
[    9.096023] usbcore: registered new interface driver usbfs
[    9.096048] usbcore: registered new interface driver hub
[    9.108376] usbcore: registered new device driver usb
[    9.120472] USB Universal Host Controller Interface driver v3.0
[    9.120542] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[    9.120554] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    9.120559] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    9.120950] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    9.120983] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001820
[    9.121115] usb usb1: configuration #1 chosen from 1 choice
[    9.121138] hub 1-0:1.0: USB hub found
[    9.121143] hub 1-0:1.0: 2 ports detected
[    9.185784] 8139too Fast Ethernet driver 0.9.28
[    9.221881] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 19
[    9.221896] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    9.221901] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    9.221923] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    9.221956] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    9.222061] usb usb2: configuration #1 chosen from 1 choice
[    9.222085] hub 2-0:1.0: USB hub found
[    9.222090] hub 2-0:1.0: 2 ports detected
[    9.241951] SCSI subsystem initialized
[    9.293717] libata version 3.00 loaded.
[    9.325810] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[    9.325824] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    9.325829] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    9.325852] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    9.325886] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
[    9.325997] usb usb3: configuration #1 chosen from 1 choice
[    9.326021] hub 3-0:1.0: USB hub found
[    9.326027] hub 3-0:1.0: 2 ports detected
[    9.429790] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 21
[    9.429803] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    9.429807] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    9.429831] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    9.429863] uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001880
[    9.429977] usb usb4: configuration #1 chosen from 1 choice
[    9.430001] hub 4-0:1.0: USB hub found
[    9.430007] hub 4-0:1.0: 2 ports detected
[    9.461638] usb 1-1: new low speed USB device using uhci_hcd and address 2
[    9.533810] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[    9.533828] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    9.533833] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    9.533857] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    9.537767] ehci_hcd 0000:00:1d.7: debug port 1
[    9.537773] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    9.537781] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xb0040000
[    9.589567] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    9.589681] usb usb5: configuration #1 chosen from 1 choice
[    9.589705] hub 5-0:1.0: USB hub found
[    9.589712] hub 5-0:1.0: 8 ports detected
[    9.693714] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 20 (level, low) -> IRQ 22
[    9.694579] eth0: RealTek RTL8139 at 0x3000, 00:16:d3:44:64:c1, IRQ 22
[    9.694583] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[    9.696898] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 23
[    9.696930] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    9.696945] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[    9.705627] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    9.713809] ata_piix 0000:00:1f.1: version 2.12
[    9.713826] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 23
[    9.713862] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    9.716370] scsi0 : ata_piix
[    9.721520] scsi1 : ata_piix
[    9.722058] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    9.722061] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    9.745233] usb 1-1: device not accepting address 2, error -71
[    9.749420] ata1.00: ATA-7: HTS421240H9AT00, HACOA70S, max UDMA/100
[    9.749423] ata1.00: 78140160 sectors, multi 16: LBA48
[    9.749449] ata1.01: ATAPI: HL-DT-ST DVD-RW GWA-4082N, CP03, max UDMA/33
[    9.751241] ata1.00: configured for UDMA/100
[    9.759337] ata1.01: configured for UDMA/33
[    9.759378] ata2: port disabled. ignoring.
[    9.759512] scsi 0:0:0:0: Direct-Access     ATA      HTS421240H9AT00  HACO PQ: 0 ANSI: 5
[    9.761709] scsi 0:0:1:0: CD-ROM            HL-DT-ST DVD-RW GWA-4082N CP03 PQ: 0 ANSI: 5
[    9.769345] Driver 'sd' needs updating - please use bus_type methods
[    9.769416] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[    9.769428] sd 0:0:0:0: [sda] Write Protect is off
[    9.769431] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    9.769446] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    9.769491] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[    9.769500] sd 0:0:0:0: [sda] Write Protect is off
[    9.769503] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    9.769517] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    9.769521]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    9.794889]  sda1 sda2 sda3 sda4
[    9.829318] sd 0:0:0:0: [sda] Attached SCSI disk
[    9.834001] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    9.834018] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    9.849082] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    9.849087] Uniform CD-ROM driver Revision: 3.20
[    9.849129] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   10.105341] usb 5-8: new high speed USB device using ehci_hcd and address 3
[   10.246263] Attempting manual resume
[   10.246267] swsusp: Resume From Partition 8:3
[   10.246268] PM: Checking swsusp image.
[   10.246476] PM: Resume from disk failed.
[   10.281495] kjournald starting.  Commit interval 5 seconds
[   10.281506] EXT3-fs: mounted filesystem with ordered data mode.
[   10.389725] usb 5-8: configuration #1 chosen from 1 choice
[   10.629070] usb 1-1: new low speed USB device using uhci_hcd and address 4
[   10.802382] usb 1-1: configuration #1 chosen from 1 choice
[   22.283601] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   22.351566] ACPI: WMI-Acer: Mapper loaded
[   22.495408] iTCO_vendor_support: vendor-support=0
[   22.527382] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   22.527467] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[   22.527501] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   22.573363] Linux agpgart interface v0.102
[   22.615378] agpgart: Detected an Intel 915GM Chipset.
[   22.615829] agpgart: Detected 7932K stolen memory.
[   22.651492] agpgart: AGP aperture is 256M @ 0xc0000000
[   22.699396] input: Power Button (FF) as /devices/virtual/input/input3
[   22.727287] ACPI: Power Button (FF) [PWRF]
[   22.727345] input: Lid Switch as /devices/virtual/input/input4
[   22.744630] ACPI: Lid Switch [LID0]
[   22.744689] input: Sleep Button (CM) as /devices/virtual/input/input5
[   22.771269] ACPI: Sleep Button (CM) [SLPB]
[   22.791257] acer_acpi: Acer Laptop ACPI Extras version 0.11.1
[   22.791262] acer_acpi: Detected Acer AMW0 version 2 interface
[   22.806962] Registered led device: acer_acpi:mail
[   22.935586] intel_rng: FWH not detected
[   22.983151] ieee80211_crypt: registered algorithm 'NULL'
[   23.027629] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   23.027634] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[   23.442974] Yenta: CardBus bridge found at 0000:06:09.0 [1025:006a]
[   23.443003] Yenta: Using CSCINT to route CSC interrupts to PCI
[   23.443005] Yenta: Routing CardBus interrupts to PCI
[   23.443011] Yenta TI: socket 0000:06:09.0, mfunc 0x00001022, devctl 0x44
[   23.520693] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   23.520697] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   23.675582] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[   23.675587] Socket status: 30000006
[   23.675590] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[   23.675597] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[   23.675600] cs: IO port probe 0x3000-0x3fff: clean.
[   23.675835] pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff
[   23.723561] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 17
[   23.772470] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x204000
[   23.774613] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   23.802083] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[   23.802430] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[   23.850724] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   24.538472] ACPI: AC Adapter [ADP1] (on-line)
[   24.817415] ACPI: Battery Slot [BAT0] (battery present)
[   24.961970] usbcore: registered new interface driver hiddev
[   24.981161] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input8
[   25.002130] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.0-1
[   25.002150] usbcore: registered new interface driver usbhid
[   25.002154] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   25.006978] usbcore: registered new interface driver libusual
[   25.022061] Initializing USB Mass Storage driver...
[   25.024459] scsi2 : SCSI emulation for USB Mass Storage devices
[   25.025292] usbcore: registered new interface driver usb-storage
[   25.025296] USB Mass Storage support registered.
[   25.025299] usb-storage: device found at 3
[   25.025301] usb-storage: waiting for device to settle before scanning
[   25.922617] cs: IO port probe 0x100-0x3af: clean.
[   25.924338] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   25.925057] cs: IO port probe 0x820-0x8ff: clean.
[   25.925662] cs: IO port probe 0xc00-0xcf7: clean.
[   25.926407] cs: IO port probe 0xa00-0xaff: clean.
[   25.938050] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[   25.938102] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 17
[   25.938131] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[   26.128317] intel8x0_measure_ac97_clock: measured 55510 usecs
[   26.128322] intel8x0: clocking to 48000
[   26.353665] lp: driver loaded but no devices found
[   26.560810] Adding 979956k swap on /dev/sda3.  Priority:-1 extents:1 across:979956k
[   27.141209] EXT3 FS on sda4, internal journal
[   29.330205] usb-storage: device scan complete
[   29.365566] scsi 2:0:0:0: Direct-Access     ST350083 0A               3.AA PQ: 0 ANSI: 0
[   29.378210] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   29.380279] sd 2:0:0:0: [sdb] Write Protect is off
[   29.380282] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[   29.380285] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   29.381150] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   29.382409] sd 2:0:0:0: [sdb] Write Protect is off
[   29.382412] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[   29.382414] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   29.382417]  sdb: sdb1 sdb2
[   29.399105] sd 2:0:0:0: [sdb] Attached SCSI disk
[   29.399146] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   69.117178] kjournald starting.  Commit interval 5 seconds
[   69.117783] EXT3 FS on sdb2, internal journal
[   69.117787] EXT3-fs: mounted filesystem with ordered data mode.
[   69.716060] ip_tables: (C) 2000-2006 Netfilter Core Team
[   70.268263] No dock devices found.
[   71.848612] apm: BIOS not found.
[   72.011050] ppdev: user-space parallel port driver
[  130.891245] Marking TSC unstable due to: cpufreq changes.
[  220.928110] eth0: link down
[  221.160532] Bluetooth: Core ver 2.11
[  221.161921] NET: Registered protocol family 31
[  221.161931] Bluetooth: HCI device and connection manager initialized
[  221.161939] Bluetooth: HCI socket layer initialized
[  221.246571] Bluetooth: L2CAP ver 2.9
[  221.246581] Bluetooth: L2CAP socket layer initialized
[   73.774649] Bluetooth: RFCOMM socket layer initialized
[   73.774665] Bluetooth: RFCOMM TTY layer initialized
[   73.774667] Bluetooth: RFCOMM ver 1.8
[  227.186697] [drm] Initialized drm 1.1.0 20060810
[  227.227023] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 23
[  227.227041] PCI: Setting latency timer of device 0000:00:02.0 to 64
[  227.229488] [drm] Initialized i915 1.6.0 20060119 on minor 0
[  256.361552] NET: Registered protocol family 10
[  256.363366] lo: Disabled Privacy Extensions
[  256.365602] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   90.687660] eth1: no IPv6 routers present
[  358.158307] NET: Registered protocol family 17
[  358.388559] ieee80211_crypt: registered algorithm 'CCMP'
[  119.585080] padlock: VIA PadLock not detected.
[  359.040108] ieee80211_crypt: registered algorithm 'TKIP'
[  364.044648] eth1: no IPv6 routers present
[  913.281582] gnome-panel[6320]: segfault at 00000048 eip b7bad7d1 esp bfab1be0 error 4
[ 1092.993375] gnome-panel[10264]: segfault at 00000048 eip b7b417d1 esp bfa75710 error 4
[ 4024.372073] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1505.683467] eth0: link down
[ 1505.683704] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1505.745474] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1505.772133] eth0: link down
[ 1505.772365] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1507.277813] eth0: link down
[ 1507.278051] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1518.318737] compiz.real[6385]: segfault at 00000020 eip 08055a4d esp bf977300 error 4
[ 1546.918594] eth0: link down
[ 1546.918833] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4657.351035] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 4678.233110] eth1: no IPv6 routers present
[ 4961.640807] gnome-appearanc[5573]: segfault at 65636e61 eip b7d25eea esp bfef8930 error 4
Ik begrijp er weer eens geen zak van. Maar da maak ni uit.. trek in een koekje:P:P

Acer aspire 3620: ubuntu hardy- Windows xp home

paradigit enforcer:
core2quad processor
nvidea geforce gtx 260
4 gig ddr2 ram
750 gb hd
22" beeldscherm

Offline vanadium

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #11 Gepost op: 2008/04/20, 21:34:18 »
Ik heb niet de indruk dat we hier met een "veilig verwijderen" probleem te maken hebben. Kan je eens, met de USB aangesloten, de output posten van

sudo fdisk -l
mount

zodat we kunnen zien of hij uiteindelijk "gezien" wordt dan wel gemount. Als hij herkend wordt maar niet mount, dan kunnen we proberen handmatig mounten: de foutmelding leert dan wel wat er fout is. Volgens mij wordt de USB hier zelfs niet "gezien".

Offline ludoke

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #12 Gepost op: 2008/04/20, 22:15:27 »
Ik heb veilig verwijderd maar hij is nog niet te zien.


ludo@ludo-2008:~$ sudo fdisk -l
[sudo] password for ludo:

Schijf /dev/sda: 160.0 GB, 160041885696 bytes
255 koppen, 63 sectoren/spoor, 19457 cilinders
Eenheid = cilinders van 16065 * 512 = 8225280 bytes
Schijf-ID: 0x000b0a2e

 Apparaat Opstart   Begin       Einde     Blokken   ID  Systeem
/dev/sda1   *           1        2451    19687626   83  Linux
/dev/sda2            2452        2698     1984027+  82  Linux wisselgeheugen
/dev/sda3            2699       19457   134616667+  83  Linux
ludo@ludo-2008:~$

Zoals jullie zien laat hij hier ook geen spoor achter.

Offline vanadium

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #13 Gepost op: 2008/04/21, 09:44:42 »
Wat is het merk en type van die USB? Mogelijk bestaat er zo iets als "niet compatibele USB sticks", die de standaarden niet volgen.

Offline ludoke

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #14 Gepost op: 2008/04/21, 10:02:21 »
Ik zal dit nog eens nakijken maar voorlopig zit ik op het werk en kan je niet onmiddelijk informeren.
Waarschijnkijk vanavond pas.

Offline ludoke

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #15 Gepost op: 2008/04/21, 18:30:23 »
USB-stick  SKYMED flash disk, dit kan ik aflezen op een win PC.

Offline Ubert

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #16 Gepost op: 2008/04/21, 19:37:04 »
Kijk eens in de /media map. Die kan je zo vinden: Locaties-computer-bestandssyteem en dan /media. Als je em niet kan vinden in /media post dan ff een screenshot. (dit had ik pas ook met mij zen stone, waar overgens bijna niemand op reageerde.)

Offline Max van Dongen

  • Lid
    • Plink Stairway site (band)
  • Steunpunt: Nee
USB-stick
« Reactie #17 Gepost op: 2008/04/21, 19:49:27 »
ik heb da probleem ok met mijn zen v plus egt bale
Ik begrijp er weer eens geen zak van. Maar da maak ni uit.. trek in een koekje:P:P

Acer aspire 3620: ubuntu hardy- Windows xp home

paradigit enforcer:
core2quad processor
nvidea geforce gtx 260
4 gig ddr2 ram
750 gb hd
22" beeldscherm

Offline Ubert

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #18 Gepost op: 2008/04/21, 21:17:29 »
Citaat van: rockertjenl
ik heb da probleem ok met mijn zen v plus egt bale
Beetje offtopic maar ja. euh kijk hier eens http://www.ubuntu-nl.org/documentatie/hardware/mp3spelers/

Offline ludoke

  • Lid
  • Steunpunt: Nee
USB-stick
« Reactie #19 Gepost op: 2008/04/21, 22:22:27 »
Nergens is iets te zien.
Bij het uittrekken van de USB-stick heb ik al driemaal een volledige heropstart van mijn systeem gehad. Ik denk  aan een voedingsprobleem. Ik heb een andere stick die perfect werkt en keil deze in de vuilbak zodat ik dit topic kan sluiten.
Toch hartelijk dank voor jullie hulp.

Groet

Ludo