Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: opstart problemen  (gelezen 1674 keer)

remm

  • Gast
opstart problemen
« Gepost op: 2006/07/30, 17:09:54 »
als ik linux op start
blijf hij heel lang hangen bij mounting root file system
ik heb de indruk dat dit als maar langer duurt

ik gebruik  Ubuntu 6.06 LTS 686
ergen voor dou core ^^

dank bij voor baat remm

socratux

  • Gast
opstart problemen
« Reactie #1 Gepost op: 2006/07/31, 12:41:39 »
Een veel voorkomend probleem is dat je USB devices niet goed/in de verkeerde volgorde worden geladen..
Probeer is opnieuw zonder USB apparaten.
Betreft het gewoon een lange duur, of krijg je ook nog een foutmelding?

remm

  • Gast
opstart problemen
« Reactie #2 Gepost op: 2006/07/31, 13:25:08 »
het is gewoon een lang duur ik heb het gecronometreet en het bedragde 3min 23 sec ^^
euhm hoe zit ik usb ding af
ik heb namelijk nog maar 1week linux

Offline Soul-Sing

  • Lid
  • Steunpunt: Nee
opstart problemen
« Reactie #3 Gepost op: 2006/07/31, 13:28:02 »
wil je eens in je syslog kijken?
is daar een voortdurend activiteit van starten-sluiten-starten?
vaak zichtbaar in wat zwartere letters.
laat het me even weten.

gr leo

remm

  • Gast
opstart problemen
« Reactie #4 Gepost op: 2006/07/31, 13:29:43 »
euhm hoe geraak ik in syslog ?

Offline Soul-Sing

  • Lid
  • Steunpunt: Nee
opstart problemen
« Reactie #5 Gepost op: 2006/07/31, 13:32:54 »
oei, ik gebruik nu USP....
ik denken systeem--beheer---systeem-log

remm

  • Gast
opstart problemen
« Reactie #6 Gepost op: 2006/07/31, 13:42:38 »
euhm usp srr hoor maar ik snap het niet

socratux

  • Gast
opstart problemen
« Reactie #7 Gepost op: 2006/07/31, 13:43:01 »
Citaat van: remm
het is gewoon een lang duur ik heb het gecronometreet en het bedragde 3min 23 sec ^^
euhm hoe zit ik usb ding af
ik heb namelijk nog maar 1week linux
gewoon pc uit, al je usb apparate ontkoppelen en opstarten

system logs staan onder /var/logs

remm

  • Gast
opstart problemen
« Reactie #8 Gepost op: 2006/07/31, 13:49:52 »
oke zal is proberen

remm

  • Gast
opstart problemen
« Reactie #9 Gepost op: 2006/07/31, 13:55:23 »
euhm nee daar mee is het niet op gelost

en var/logs vind ik nie echt maar moet ik dat in de treminal in typen

Offline bartek

  • Lid
    • http://bartek.blogsome.com
  • Steunpunt: Nee
opstart problemen
« Reactie #10 Gepost op: 2006/07/31, 13:59:46 »
De map /var/logs kan je eenvoudig vinden door in Locaties->persoonlijke map en daar 2X op de pijl omhoog klikken.

En met USP bedoelde hij 't Ubuntu System Pannel. Een plugin waar hier over gesproken wordt.
http://forum.ubuntu-nl.org/topic/2357
| Deliberando saepe perit occasio |

"Car la vie est un bien perdu quand on n'a pas vécu comme on l'aurait voulu"

remm

  • Gast
opstart problemen
« Reactie #11 Gepost op: 2006/07/31, 14:32:32 »
oke ik heb die map gevonden en welke log moe ik nu zoeken
ik zie geen voortdurend activiteit van starten-sluiten-starten
maar mss moet ik daar veer naar een bepaald log kijken

Offline profoX

  • Lid
    • wesley
    • Lionslink
  • Steunpunt: Nee
opstart problemen
« Reactie #12 Gepost op: 2006/07/31, 15:24:48 »
remm: typ gewoon in de terminal na het opstarten:
dmesg > /tmp/dmesg && gedit /tmp/dmesg

Dan krijg je de nieuwste systeemlog van tijdens het booten netjes in een grafische editor, en die kan je dan kopie
Human Knowledge Belongs To The World -- Antitrust (2001)
Nederlandstalige Ubuntu documentatie van Ubuntu-NL (wiki)

remm

  • Gast
opstart problemen
« Reactie #13 Gepost op: 2006/08/01, 22:57:19 »
oke hier is het
[17179569.184000] Linux version 2.6.15-26-686 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Mon Jul 17 20:14:14 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000007fe90000 (usable)
[17179569.184000]  BIOS-e820: 000000007fe90000 - 000000007fe9b000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000007fe9b000 - 000000007ff00000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[17179569.184000] 1150MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f7910
[17179569.184000] On node 0 totalpages: 523920
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 294544 pages, LIFO batch:31
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f7860
[17179569.184000] ACPI: RSDT (v001 PTLTD  Capell00 0x06040000  LTP 0x00000000) @ 0x7fe95142
[17179569.184000] ACPI: FADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe9ae20
[17179569.184000] ACPI: MADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe9ae94
[17179569.184000] ACPI: HPET (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe9aefc
[17179569.184000] ACPI: MCFG (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe9af34
[17179569.184000] ACPI: MADT (v001 PTLTD   APIC   0x06040000  LTP 0x00000000) @ 0x7fe9af70
[17179569.184000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x7fe9afd8
[17179569.184000] ACPI: SSDT (v001 SataRe SataAhci 0x00001000 INTL 0x20050624) @ 0x7fe95b3b
[17179569.184000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x7fe95186
[17179569.184000] ACPI: DSDT (v001 UW____ F29_____ 0x06040000 INTL 0x20050624) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: 2 duplicate APIC table ignored.
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:14 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 6:14 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1 already used, trying 2
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda6 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Console: colour VGA+ 80x25
[17179569.184000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.184000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.184000] Memory: 2064648k/2095680k available (2110k kernel code, 29852k reserved, 595k data, 332k init, 1178176k highmem)
[17179569.184000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.184000] hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
[17179569.184000] hpet0: 3 64-bit timers, 14318180 Hz
[17179569.184000] Using HPET for base-timer
[17179569.184000] Using HPET for gettimeofday
[17179569.184000] Detected 1828.760 MHz processor.
[17179569.184000] Using hpet for high-res timesource
[17179569.268000] Calibrating delay using timer specific routine.. 3661.93 BogoMIPS (lpj=7323871)
[17179569.268000] Security Framework v1.0.0 initialized
[17179569.268000] SELinux:  Disabled at boot.
[17179569.268000] Mount-cache hash table entries: 512
[17179569.268000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179569.268000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179569.268000] monitor/mwait feature present.
[17179569.268000] using mwait in idle threads.
[17179569.268000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179569.268000] CPU: L2 cache: 2048K
[17179569.268000] CPU: Hyper-Threading is disabled
[17179569.268000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000
[17179569.268000] mtrr: v2.0 (20020519)
[17179569.268000] Enabling fast FPU save and restore... done.
[17179569.268000] Enabling unmasked SIMD FPU exception support... done.
[17179569.268000] Checking 'hlt' instruction... OK.
[17179569.284000] SMP alternatives: switching to UP code
[17179569.284000] checking if image is initramfs... it is
[17179569.828000] Freeing initrd memory: 6808k freed
[17179569.872000] ACPI: Looking for DSDT ... not found!
[17179569.876000] CPU0: Intel Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
[17179569.876000] SMP alternatives: switching to SMP code
[17179569.876000] Booting processor 1/1 eip 3000
[17179569.888000] Initializing CPU#1
[17179569.968000] Calibrating delay using timer specific routine.. 3657.54 BogoMIPS (lpj=7315081)
[17179569.968000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179569.968000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179569.968000] monitor/mwait feature present.
[17179569.968000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179569.968000] CPU: L2 cache: 2048K
[17179569.968000] CPU: Hyper-Threading is disabled
[17179569.968000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000
[17179569.968000] CPU1: Intel Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
[17179569.968000] Total of 2 processors activated (7319.47 BogoMIPS).
[17179569.968000] ENABLING IO-APIC IRQs
[17179569.968000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.120000] checking TSC synchronization across 2 CPUs: passed.
[17179570.124000] Brought up 2 CPUs
[17179570.124000] NET: Registered protocol family 16
[17179570.124000] EISA bus registered
[17179570.124000] ACPI: bus type pci registered
[17179570.160000] PCI: PCI BIOS revision 2.10 entry at 0xfd833, last bus=5
[17179570.160000] PCI: Using MMCONFIG
[17179570.160000] ACPI: Subsystem revision 20051216
[17179570.164000] ACPI: Interpreter enabled
[17179570.164000] ACPI: Using IOAPIC for interrupt routing
[17179570.168000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.168000] PCI: Probing PCI hardware (bus 00)
[17179570.168000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179570.168000] Boot video device is 0000:01:00.0
[17179570.168000] PCI: Transparent bridge - 0000:00:1e.0
[17179570.168000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.172000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[17179570.172000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[17179570.172000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[17179570.176000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[17179570.176000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[17179570.176000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[17179570.176000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[17179570.176000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[17179570.176000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[17179570.176000] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[17179570.176000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[17179570.176000] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[17179570.176000] ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
[17179588.184000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179588.184000] pnp: PnP ACPI init
[17179588.184000] pnp: PnP ACPI: found 11 devices
[17179588.184000] PnPBIOS: Disabled by ACPI PNP
[17179588.184000] PCI: Using ACPI for IRQ routing
[17179588.184000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179588.184000] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[17179588.200000] pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
[17179588.200000] pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
[17179588.200000] PCI: Bridge: 0000:00:01.0
[17179588.200000]   IO window: 2000-2fff
[17179588.200000]   MEM window: b0100000-b01fffff
[17179588.200000]   PREFETCH window: c0000000-cfffffff
[17179588.200000] PCI: Bridge: 0000:00:1c.0
[17179588.200000]   IO window: disabled.
[17179588.200000]   MEM window: fac00000-febfffff
[17179588.200000]   PREFETCH window: disabled.
[17179588.200000] PCI: Bridge: 0000:00:1c.2
[17179588.200000]   IO window: disabled.
[17179588.200000]   MEM window: b0200000-b02fffff
[17179588.200000]   PREFETCH window: disabled.
[17179588.200000] PCI: Bridge: 0000:00:1e.0
[17179588.200000]   IO window: 3000-3fff
[17179588.200000]   MEM window: b0300000-b03fffff
[17179588.200000]   PREFETCH window: 88000000-880fffff
[17179588.200000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179588.200000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179588.200000] PCI: Enabling device 0000:00:1c.0 (0000 -> 0002)
[17179588.200000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179588.200000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179588.200000] PCI: Enabling device 0000:00:1c.2 (0000 -> 0002)
[17179588.200000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179588.200000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179588.200000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179588.200000] Simple Boot Flag at 0x36 set to 0x1
[17179588.200000] audit: initializing netlink socket (disabled)
[17179588.200000] audit(1154471876.197:1): initialized
[17179588.200000] highmem bounce pool size: 64 pages
[17179588.200000] VFS: Disk quotas dquot_6.5.1
[17179588.200000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179588.200000] Initializing Cryptographic API
[17179588.200000] io scheduler noop registered
[17179588.200000] io scheduler anticipatory registered
[17179588.200000] io scheduler deadline registered
[17179588.200000] io scheduler cfq registered
[17179588.200000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179588.200000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179588.200000] assign_interrupt_mode Found MSI capability
[17179588.200000] Allocate Port Service[pcie00]
[17179588.200000] Allocate Port Service[pcie03]
[17179588.200000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[17179588.200000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179588.200000] assign_interrupt_mode Found MSI capability
[17179588.200000] Allocate Port Service[pcie00]
[17179588.200000] Allocate Port Service[pcie02]
[17179588.200000] Allocate Port Service[pcie03]
[17179588.200000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179588.200000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179588.200000] assign_interrupt_mode Found MSI capability
[17179588.200000] Allocate Port Service[pcie00]
[17179588.200000] Allocate Port Service[pcie02]
[17179588.200000] Allocate Port Service[pcie03]
[17179588.200000] isapnp: Scanning for PnP cards...
[17179588.556000] isapnp: No Plug & Play device found
[17179588.572000] Real Time Clock Driver v1.12
[17179588.572000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179588.580000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179588.584000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179588.584000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179588.584000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179588.584000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179588.584000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179588.584000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179588.588000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179588.588000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179588.588000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179588.588000] mice: PS/2 mouse device common for all mice
[17179588.588000] EISA: Probing bus 0 at eisa.0
[17179588.588000] Cannot allocate resource for EISA slot 1
[17179588.588000] Cannot allocate resource for EISA slot 2
[17179588.588000] Cannot allocate resource for EISA slot 3
[17179588.588000] EISA: Detected 0 cards.
[17179588.588000] NET: Registered protocol family 2
[17179588.632000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179588.632000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes)
[17179588.636000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[17179588.636000] TCP: Hash tables configured (established 262144 bind 65536)
[17179588.636000] TCP reno registered
[17179588.636000] TCP bic registered
[17179588.636000] NET: Registered protocol family 1
[17179588.636000] NET: Registered protocol family 8
[17179588.636000] NET: Registered protocol family 20
[17179588.636000] Starting balanced_irq
[17179588.636000] Using IPI No-Shortcut mode
[17179588.636000] ACPI wakeup devices:
[17179588.636000] HDEF PXS2 PXS3 PXS4 PXS5 PXS6 USB1 USB2 USB3 USB4 USB7 LANC MODM
[17179588.636000] ACPI: (supports S0 S3 S4 S5)
[17179588.636000] Freeing unused kernel memory: 332k freed
[17179588.680000] vga16fb: initializing
[17179588.680000] vga16fb: mapped to 0xc00a0000
[17179588.760000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179588.800000] Console: switching to colour frame buffer device 80x25
[17179588.800000] fb0: VGA16 VGA frame buffer device
[17179589.832000] Capability LSM initialized
[17179589.896000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179589.896000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179589.900000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[17179589.900000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179589.900000] ACPI: Thermal Zone [THRM] (37 C)
[17179590.292000] ICH7: IDE controller at PCI slot 0000:00:1f.1
[17179590.292000] ACPI: PCI Interrupt 0000:00:1f.1[b] -> GSI 19 (level, low) -> IRQ 225
[17179590.292000] ICH7: chipset revision 2
[17179590.292000] ICH7: not 100% native mode: will probe irqs later
[17179590.292000]     ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
[17179590.292000] Probing IDE interface ide0...
[17179593.380000] hda: _NEC DVD+/-RW ND-6650A, ATAPI CD/DVD-ROM drive
[17179596.416000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179596.432000] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179596.432000] Uniform CD-ROM driver Revision: 3.20
[17179596.524000] SCSI subsystem initialized
[17179596.524000] ACPI: bus type scsi registered
[17179596.524000] libata version 1.20 loaded.
[17179596.524000] ahci 0000:00:1f.2: version 1.2
[17179596.524000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 225
[17179639.064000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179639.064000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[17179639.064000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[17179639.064000] ata1: SATA max UDMA/133 cmd 0xF8878500 ctl 0x0 bmdma 0x0 irq 233
[17179639.064000] ata2: SATA max UDMA/133 cmd 0xF8878580 ctl 0x0 bmdma 0x0 irq 233
[17179639.064000] ata3: SATA max UDMA/133 cmd 0xF8878600 ctl 0x0 bmdma 0x0 irq 233
[17179639.064000] ata4: SATA max UDMA/133 cmd 0xF8878680 ctl 0x0 bmdma 0x0 irq 233
[17179639.268000] ata1: dev 0 cfg 00:045a 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:bf09 87:6063 88:203f 93:0000
[17179639.268000] ata1: dev 0 ATA-7, max UDMA/100, 195371568 sectors: LBA48
[17179639.268000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe4c40
[17179639.272000] ata1: dev 0 configured for UDMA/100
[17179639.272000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe4c40
[17179639.272000] scsi0 : ahci
[17179639.480000] ata2: no device found (phy stat 00000000)
[17179639.480000] scsi1 : ahci
[17179639.820000] ata3: no device found (phy stat 00000000)
[17179639.820000] scsi2 : ahci
[17179640.024000] ata4: no device found (phy stat 00000000)
[17179640.024000] scsi3 : ahci
[17179640.024000]   Vendor: ATA       Model: FUJITSU MHV2100B  Rev: 0000
[17179640.024000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179640.028000] Driver 'sd' needs updating - please use bus_type methods
[17179640.028000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[17179640.028000] SCSI device sda: drive cache: write back
[17179640.028000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[17179640.028000] SCSI device sda: drive cache: write back
[17179640.028000]  sda: sda1 sda2 < sda5 sda6 >
[17179640.444000] sd 0:0:0:0: Attached scsi disk sda
[17179640.888000] usbcore: registered new driver usbfs
[17179640.888000] usbcore: registered new driver hub
[17179640.892000] USB Universal Host Controller Interface driver v2.3
[17179640.892000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 50
[17179640.892000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179640.892000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179640.896000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179640.896000] uhci_hcd 0000:00:1d.0: irq 50, io base 0x00001800
[17179640.916000] hub 1-0:1.0: USB hub found
[17179640.916000] hub 1-0:1.0: 2 ports detected
[17179640.928000] ieee1394: Initialized config rom entry `ip1394'
[17179641.176000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 225
[17179641.176000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179641.176000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179641.176000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179641.176000] uhci_hcd 0000:00:1d.1: irq 225, io base 0x00001820
[17179641.176000] hub 2-0:1.0: USB hub found
[17179641.176000] hub 2-0:1.0: 2 ports detected
[17179641.312000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
[17179641.312000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179641.312000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179641.312000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179641.312000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001840
[17179641.312000] hub 3-0:1.0: USB hub found
[17179641.312000] hub 3-0:1.0: 2 ports detected
[17179641.432000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[17179641.432000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179641.432000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179641.432000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179641.432000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001860
[17179641.432000] hub 4-0:1.0: USB hub found
[17179641.432000] hub 4-0:1.0: 2 ports detected
[17179641.564000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 50
[17179641.564000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179641.564000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179641.564000] ehci_hcd 0000:00:1d.7: debug port 1
[17179641.564000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179641.564000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179641.564000] ehci_hcd 0000:00:1d.7: irq 50, io mem 0xb0004000
[17179641.568000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179641.568000] hub 5-0:1.0: USB hub found
[17179641.568000] hub 5-0:1.0: 8 ports detected
[17179641.700000] ohci1394: $Rev: 1313 $ Ben Collins
[17179641.700000] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 18 (level, low) -> IRQ 185
[17179641.748000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185]  MMIO=[b0304000-b03047ff]  Max Packet=[2048]
[17179641.764000] Probing IDE interface ide1...
[17179644.184000] usb 3-1: new low speed USB device using uhci_hcd and address 2
[17179644.184000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d495300bc24]
[17179644.216000] Attempting manual resume
[17179644.284000] EXT3-fs: mounted filesystem with ordered data mode.
[17179644.284000] kjournald starting.  Commit interval 5 seconds
[17179653.716000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179654.632000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179654.652000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179654.704000] Linux agpgart interface v0.101 (c) Dave Jones
[17179654.732000] agpgart: Detected an Intel 945GM Chipset.
[17179654.752000] agpgart: AGP aperture is 256M @ 0x0
[17179654.848000] hw_random: RNG not detected
[17179654.948000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 58
[17179654.948000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179655.196000] usbcore: registered new driver hiddev
[17179655.212000] input: Logitech USB Optical Mouse as /class/input/input1
[17179655.212000] input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-1
[17179655.212000] usbcore: registered new driver usbhid
[17179655.212000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179655.216000] ieee80211_1_1_13_crypt: registered algorithm 'NULL'
[17179655.228000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13
[17179655.228000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation
[17179655.256000] ieee80211_crypt: registered algorithm 'NULL'
[17179655.256000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[17179655.256000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[17179655.284000] ts: Compaq touchscreen protocol output
[17179655.308000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.0.5m
[17179655.308000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[17179655.668000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a
[17179655.712000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[17179655.740000] hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
[17179663.100000] hda_intel: azx_get_response timeout, switching to single_cmd mode...
[17179673.760000] PCI: Enabling device 0000:04:00.0 (0000 -> 0002)
[17179673.760000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 185
[17179673.760000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[17179673.760000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[17179674.280000] r8169 Gigabit Ethernet driver 2.2LK loaded
[17179674.280000] ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 19 (level, low) -> IRQ 225
[17179674.284000] eth0: Identified chip type is 'RTL8169s/8110s'.
[17179674.284000] eth0: RTL8169 at 0xf8a7c800, 00:03:0d:42:20:19, IRQ 225
[17179674.420000] r8169: eth0: link down
[17179675.336000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[17179675.496000] NET: Registered protocol family 17
[17179675.500000] lp: driver loaded but no devices found
[17179675.548000] sbp2: $Rev: 1306 $ Ben Collins
[17179675.548000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179675.548000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179675.608000] Adding 4136696k swap on /dev/sda5.  Priority:-1 extents:1 across:4136696k
[17179675.668000] EXT3 FS on sda6, internal journal
[17179675.836000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179675.836000] md: bitmap version 4.39
[17179676.196000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179676.736000] cdrom: open failed.
[17179677.064000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[17179677.136000] NTFS volume version 3.1.
[17179681.520000] NET: Registered protocol family 10
[17179681.520000] lo: Disabled Privacy Extensions
[17179681.520000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17179681.520000] IPv6 over IPv4 tunneling driver
[17179682.188000] ACPI: AC Adapter [AC0] (on-line)
[17179682.192000] ACPI: Battery Slot [BAT0] (battery present)
[17179682.264000] ACPI: Power Button (FF) [PWRF]
[17179682.264000] ACPI: Lid Switch [LID0]
[17179682.264000] ACPI: Power Button (CM) [PWRB]
[17179682.264000] ACPI: Sleep Button (CM) [SLPB]
[17179682.344000] ibm_acpi: ec object not found
[17179682.380000] pcc_acpi: loading...
[17179682.412000] wmi_add device=dfe09400
[17179682.412000] calling WQBA
[17179682.476000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[17179682.476000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[17179686.800000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179686.800000] [fglrx] Maximum main memory to use for locked dma buffers: 1897 MBytes.
[17179686.800000] [fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0
[17179686.824000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179687.180000] ppdev: user-space parallel port driver
[17179687.456000] apm: BIOS not found.
[17179687.944000] [fglrx] total      GART = 67108864
[17179687.944000] [fglrx] free       GART = 51118080
[17179687.944000] [fglrx] max single GART = 51118080
[17179687.944000] [fglrx] total      LFB  = 127954944
[17179687.944000] [fglrx] free       LFB  = 119762944
[17179687.944000] [fglrx] max single LFB  = 119762944
[17179687.944000] [fglrx] total      Inv  = 0
[17179687.944000] [fglrx] free       Inv  = 0
[17179687.944000] [fglrx] max single Inv  = 0
[17179687.944000] [fglrx] total      TIM  = 0
[17179689.832000] Bluetooth: Core ver 2.8
[17179689.832000] NET: Registered protocol family 31
[17179689.832000] Bluetooth: HCI device and connection manager initialized
[17179689.832000] Bluetooth: HCI socket layer initialized
[17179689.872000] Bluetooth: L2CAP ver 2.8
[17179689.872000] Bluetooth: L2CAP socket layer initialized
[17179689.880000] Bluetooth: RFCOMM socket layer initialized
[17179689.880000] Bluetooth: RFCOMM TTY layer initialized
[17179689.880000] Bluetooth: RFCOMM ver 1.7
[17179692.504000] eth1: no IPv6 routers present