Post hier je .conkyrc plus een screenshot ;) 2013 V.C.

[paulnl]

Grafka is een ATI Radeon Xpress 200m

CPU is een Intel Celeron M410 1.46

[paulnl]

Als ik sensors-detect gebruik krijg ik voor mijn cpu onderstaand:

Next adapter: SMBus PIIX4 adapter at 8400 (i2c-0)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'...                                No

Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM78-J' at 0x290...     No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Fintek'...                       No
Trying family `ITE'...                                      No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Fintek'...                       No
Trying family `ITE'...                                      No

Some south bridges, CPUs or memory controllers may also contain
embedded sensors. Do you want to scan for them? (YES/no): y
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD K10 thermal sensors...                                  No
Intel Core family thermal sensor...                         Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `coretemp' (should be inserted):
  Detects correctly:
  * Chip `Intel Core family thermal sensor' (confidence: 9)

I will now generate the commands needed to load the required modules.
Just press ENTER to continue:

To load everything that is needed, add this to /etc/modules:

#----cut here----
# Chip drivers
coretemp
#----cut here----

Do you want to add these lines automatically? (yes/NO)


Kan iemand my vertellen hoe ik hier de temp van de cpu uit kan halen ?? gegevens van de grafka staan er niet in (volgens mij)

[TopGear]

Zou je dat stuk code tussen
de code tags willen plaatsen?
Dan krijg je

Code: [Selecteer]

dit te zien

[paulnl]

Als ik sensors-detect gebruik krijg ik voor mijn cpu onderstaand:

Code: [Selecteer]

Next adapter: SMBus PIIX4 adapter at 8400 (i2c-0)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'...                                No

Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM78-J' at 0x290...     No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Fintek'...                       No
Trying family `ITE'...                                      No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Fintek'...                       No
Trying family `ITE'...                                      No

Some south bridges, CPUs or memory controllers may also contain
embedded sensors. Do you want to scan for them? (YES/no): y
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD K10 thermal sensors...                                  No
Intel Core family thermal sensor...                         Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `coretemp' (should be inserted):
  Detects correctly:
  * Chip `Intel Core family thermal sensor' (confidence: 9)

I will now generate the commands needed to load the required modules.
Just press ENTER to continue:

To load everything that is needed, add this to /etc/modules:

#----cut here----
# Chip drivers
coretemp
#----cut here----

Do you want to add these lines automatically? (yes/NO)


sorry
Kan iemand my vertellen hoe ik hier de temp van de cpu uit kan halen ?? gegevens van de grafka staan er niet in (volgens mij)

[paulnl]

Is er ook iemand die mij de inhoud voor rhythmboxbar.sh kan geven ?


Thanks

[paulnl]

Na heel veel foutmeldingen knippen en plakken werkt mijn conky

Code: [Selecteer]

# UBUNTU-CONKY
# conky configuration

background black
use_xft yes
xftfont Terminus:size=8
out_to_console no
update_interval 2.0
total_run_times 0
own_window no
double_buffer yes
draw_shades yes
draw_outline no
draw_borders no
stippled_borders 8
border_margin 8
border_width 1
default_color white
default_shade_color black
default_outline_color white
alignment top_right
maximum_width 270
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
gap_x 15
gap_y 35
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale no
use_spacer yes

TEXT
${color orange}SYSTEEM ${hr 2}$color
Hostnaam: $alignr$nodename
OS: $alignr Ubuntu Jaunty (9.04)
Publiek IP: $alignr${execi 1 ~/.conky/ip.sh}
IP Draadloos: $alignr${addr wlan0}
IP Bedraad: $alignr${addr nlan0}
Kernel: $alignr$kernel
Uptime: $alignr$uptime
Graphics: $alignr ATI Radeon Xpress 200M

${color orange}CPU (Inter(R) Celeron(R) M 410 @ 1.46)${hr 2}$color
Load: $loadavg
Core 1 @ ${freq 1}Mhz:  ${cpu cpu1}% ${cpubar cpu1}
$cpugraph
Naam       $alignr          PID       CPU%    MEM%    
 ${top name 1} $alignr    ${top pid 1}  ${top cpu 1}    ${top mem 1}        
 ${top name 2} $alignr    ${top pid 2}  ${top cpu 2}    ${top mem 2}        
 ${top name 3} $alignr    ${top pid 3}  ${top cpu 3}    ${top mem 3}        
 ${top name 4} $alignr    ${top pid 4}  ${top cpu 4}    ${top mem 4}        

${color orange}GEHEUGEN${hr 2}$color
RAM:       $mem/$memmax    $alignc $memperc% ${membar}
Swap:      $swap/$swapmax  $alignc $swapperc% ${swapbar}

${color orange}Processen: $processes Nu actief: $running_processes$color
Name       $alignr          PID       CPU%    MEM%    
 ${top_mem name 1}  $alignr    ${top_mem pid 1}  ${top_mem cpu 1}    ${top_mem mem 1}        
 ${top_mem name 2}  $alignr    ${top_mem pid 2}  ${top_mem cpu 2}    ${top_mem mem 2}        
 ${top_mem name 3}  $alignr    ${top_mem pid 3}  ${top_mem cpu 3}    ${top_mem mem 3}        
 ${top_mem name 4}  $alignr    ${top_mem pid 4}  ${top_mem cpu 4}    ${top_mem mem 4}        

${color orange}DISK ${hr 2}$color
/:               ${fs_used /}/${fs_size /}   $alignc ${fs_used_perc /}% ${fs_bar /}

${color orange}NETWERK (${addr wlan0}) ${hr 2}$color
SSID:$alignr${wireless_essid wlan0}
Down: ${downspeed wlan0} k/s                    Up: ${upspeed wlan0} k/s
${downspeedgraph wlan0 25,130} ${alignc} ${upspeedgraph wlan0 25,130}
Total: ${totaldown wlan0}                 Total: ${totalup wlan0}
${if_running rhythmbox}
${color orange}Music${hr 2}$color
  ${color #ffe7ba}Title: $color${execi 20 rhythmbox-client --no-start --print-playing-format "%tt"}
  ${color #ffe7ba}Album: $color${execi 20 rhythmbox-client --no-start --print-playing-format "%at"}$alignr${color #ffe7ba} CD:$color${execi 20 rhythmbox-client --no-start --print-playing-format "%aN"}
  ${color #ffe7ba}Artist:$color ${execi 20 rhythmbox-client --no-start --print-playing-format "%aa"}$alignr${color #ffe7ba}Track:$color${execi 20 rhythmbox-client --no-start --print-playing-format "%tN"}
  ${color #ffe7ba}Time: ${color #9acd32}${execi 1 rhythmbox-client --no-start --print-playing-format "%te / %td"}$alignr${color #ffe7ba}Year: $color${execi 20 rhythmbox-client --no-start --print-playing-format "%ay"}
  ${color #ba55d3}${execbar sh ~/.conky/rhythmboxbar.sh}
$endif
${color orange}Er zijn ${texeci 60 perl ~/.conky/gmail.pl n} nieuwe mail(s).${hr 2}$color
${execi 60 perl ~/.conky/gmail.pl s}

rythmbox en Gmail werken ook nu ben ik nog op zoek naar een manier om gegevens van een radio station weer te geven.

Voorbeeld:
Ik luister vaak naar Radio3 via rythmbox. Ik weet dat radio3 behalve de muziek ook de op dat moment spelende track en de gegevens daarvan mee zend. Is er een manier om dit in de conky weer te geven ? dat zou helemaal perfect zijn.

[paulnl]

Zo toch nog effe lopen vogelen en ben al weer een end .

Nu de temp van de CPU nog. als ik in mijn conky file

Code: [Selecteer]

$alignr CPU: ${execi 60 sensors} C
invoer is dit het resultaat


Hoe kan ik hier alleen de temperatuur uit distilleren ??

[paulnl]

Bijna alle problemen opgelost.

hier het resultaat


Alleen de grafka nog en de afbeeldingen verbeteren. Weet iemand of het ook mogelijk is de afbeeldingen op een lijn te zetten af kan dit alleen met coardinaten.

[58855522773]

Zo ongeveer? 

Wow, deze vind ik heel erg mooi. Kun je de .conkyrc even posten?

SORRY, HEB EVEN TERUG GEKEKEN EN HEM GEVONDEN!

[58855522773]

Zo ongeveer?  

Hoe heb je het weer zo gekregen? En wat zou ik moeten invullen om mijn locatie te zien?

Eindhoven, Nederland

[Jan E.]

voor het weer moet je even conky forecast bekijken en downloaden. Vervolgens moet je ergens een accountje aanmaken en je locatie invullen. Ik weet het even niet meer uit mijn hoofd, maar dat staat allemaal op de site.

[58855522773]

Ik heb even gezocht via Google maar snap helemaal niks van het 'script'. Ik heb geprobeerd deze tutorial te volgen (http://maketecheasier.com/how-to-create-a-minimal-and-beautiful-desktop-with-conky/2008/10/30) maar snap er dus geen snars van. Ik heb me wel al aangemeld op de site voor WeatherForecast.
Kan iemand me helpen met het compleet krijgen van mijn Conky WatherForecast?

Alvast bedankt

[Gijsbert]

Open een terminal en type gksu gedit /etc/apt/sources.list  geef een Enter, vul je wachtwoord in, hier zie je niks van, geen sterretjes o.i.d.geef een ENTER. Vul onderaan in het tekst bestand wat je te zien krijgt deze regel. deb http://ppa.launchpad.net/m-buck/ubuntu hardy main ssla het bestand op en sluit dit. Ga verder inde terminal en type sudo apt-get update vervolgens type je sudo apt-get install conkyemail conkyforecast
En ga verder met je link met Configuring Weather Forecast

[TopGear]

Screenshot:


Conky:

Code: [Selecteer]

# UBUNTU-CONKY
# conky configuration

background no
use_xft yes
xftfont Terminus:size=8
out_to_console no
update_interval 1.0
total_run_times 0
own_window override
double_buffer yes
draw_shades no
draw_outline no
draw_borders no
stippled_borders 8
border_margin 12
border_width 1
default_color black
default_shade_color black
default_outline_color white
alignment top_right
maximum_width 270
own_window yes
own_window_type right
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
gap_x 15
gap_y 35
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale no
use_spacer yes

TEXT
${color orange}SYSTEEM ${hr 2}$color
Hostname: $nodename
Kernel: $kernel
Uptime: $uptime

${color orange}PROCESSOR${hr 2}$color
Kern 1 @ ${freq 1}Mhz:  ${cpu cpu1}% ${cpubar cpu1}
Kern 2 @ ${freq 2}Mhz:  ${cpu cpu2}% ${cpubar cpu2}
Kern 3 @ ${freq 3}Mhz:  ${cpu cpu3}% ${cpubar cpu3}
Kern 4 @ ${freq 4}Mhz:  ${cpu cpu4}% ${cpubar cpu4}

Gemiddelde: $cpu% $cpubar
$cpugraph        

${color black}Hoogste processor verbruikers:
${color lightgrey} ${top name 1}$alignr${top cpu 1}%
${color lightgrey} ${top name 2}$alignr${top cpu 2}%
${color lightgrey} ${top name 3}$alignr${top cpu 3}%

${color orange}GEHEUGEN${hr 2}$color
RAM:       $mem/$memmax    $alignc $memperc% ${membar}
Swap:      $swap/$swapmax    $alignc $swapperc% ${swapbar}
Processen: $processes Running: $running_processes      

${color black}Hoogste RAM verbuikers:
${color lightgrey} ${top_mem name 1}$alignr${top_mem mem 1}%
${color lightgrey} ${top_mem name 2}$alignr${top_mem mem 2}%
${color lightgrey} ${top_mem name 3}$alignr${top_mem mem 3}%

${color orange}HARDESCHIJF ${hr 2}$color
Bestandssysteem: ${fs_used /}/${fs_size /}  
${fs_used_perc /}% ${fs_bar /}
Downloads: ${fs_used /media/Downloads}/${fs_size /media/Downloads}  
${fs_used_perc /media/Downloads}% ${fs_bar /media/Downloads}

${color orange}NETWERK ${hr 2}$color
${color orange}IP adres: ${color }${addr eth0}
${color}Op: ${color }${upspeed eth0}
${upspeedgraph eth0 20,160 ddaa00 ddaa00}
${color}Neer: ${color }${downspeed eth0}${color}
${downspeedgraph eth0 20,160 ddaa00 ddaa00}

${color orange}TEMPERATUREN ${hr 2}$color
${color orange}Hardeschijven ${hr 1}$color
${color black}Temperatuur Backup en school:$alignr${hddtemp /dev/sda}C    
${color black}Temperatuur 1TB:                     $alignr${hddtemp /dev/sdb}C    
${color black}Temperatuur Downloads:                     $alignr${hddtemp /dev/sdc}C    
${color black}Temperatuur Ubuntu:                     $alignr${hddtemp /dev/sdd}C    
${color orange}Videokaart ${hr 1}$color
${color black}Temperatuur videokaart: ${color}$alignr${execi 60 nvidia-settings -query GPUCoreTemp | perl -ne 'print $1 if /GPUCoreTemp.*?: (\d+)./;'} C    

[TopGear]

Zal ik vanmiddag doen. Eerst school.

[Thijsg]

Eerst even helemaal naar rechts scrollen om de conky te zien

Screenshot:


Conky:

Code: [Selecteer]

# UBUNTU-CONKY
# conky configuration

background no
use_xft yes
xftfont Terminus:size=8
out_to_console no
update_interval 1.0
total_run_times 0
own_window override
double_buffer yes
draw_shades no
draw_outline no
draw_borders no
stippled_borders 8
border_margin 12
border_width 1
default_color black
default_shade_color black
default_outline_color white
alignment top_right
maximum_width 270
own_window yes
own_window_type right
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
gap_x 15
gap_y 35
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale no
use_spacer yes

TEXT
${color orange}SYSTEEM ${hr 2}$color
Hostname: $nodename
Kernel: $kernel
Uptime: $uptime

${color orange}PROCESSOR${hr 2}$color
Kern 1 @ ${freq 1}Mhz:  ${cpu cpu1}% ${cpubar cpu1}
Kern 2 @ ${freq 2}Mhz:  ${cpu cpu2}% ${cpubar cpu2}
Kern 3 @ ${freq 3}Mhz:  ${cpu cpu3}% ${cpubar cpu3}
Kern 4 @ ${freq 4}Mhz:  ${cpu cpu4}% ${cpubar cpu4}

Gemiddelde: $cpu% $cpubar
$cpugraph        

${color black}Hoogste processor verbruikers:
${color lightgrey} ${top name 1}$alignr${top cpu 1}%
${color lightgrey} ${top name 2}$alignr${top cpu 2}%
${color lightgrey} ${top name 3}$alignr${top cpu 3}%

${color orange}GEHEUGEN${hr 2}$color
RAM:       $mem/$memmax    $alignc $memperc% ${membar}
Swap:      $swap/$swapmax    $alignc $swapperc% ${swapbar}
Processen: $processes Running: $running_processes      

${color black}Hoogste RAM verbuikers:
${color lightgrey} ${top_mem name 1}$alignr${top_mem mem 1}%
${color lightgrey} ${top_mem name 2}$alignr${top_mem mem 2}%
${color lightgrey} ${top_mem name 3}$alignr${top_mem mem 3}%

${color orange}HARDESCHIJF ${hr 2}$color
Bestandssysteem: ${fs_used /}/${fs_size /}  
${fs_used_perc /}% ${fs_bar /}
Downloads: ${fs_used /media/Downloads}/${fs_size /media/Downloads}  
${fs_used_perc /media/Downloads}% ${fs_bar /media/Downloads}

${color orange}NETWERK ${hr 2}$color
${color orange}IP adres: ${color }${addr eth0}
${color}Op: ${color }${upspeed eth0}
${upspeedgraph eth0 20,160 ddaa00 ddaa00}
${color}Neer: ${color }${downspeed eth0}${color}
${downspeedgraph eth0 20,160 ddaa00 ddaa00}

${color orange}TEMPERATUREN ${hr 2}$color
${color orange}Hardeschijven ${hr 1}$color
${color black}Temperatuur Backup en school:$alignr${hddtemp /dev/sda}C    
${color black}Temperatuur 1TB:                     $alignr${hddtemp /dev/sdb}C    
${color black}Temperatuur Downloads:                     $alignr${hddtemp /dev/sdc}C    
${color black}Temperatuur Ubuntu:                     $alignr${hddtemp /dev/sdd}C    
${color orange}Videokaart ${hr 1}$color
${color black}Temperatuur videokaart: ${color}$alignr${execi 60 nvidia-settings -query GPUCoreTemp | perl -ne 'print $1 if /GPUCoreTemp.*?: (\d+)./;'} C    

[TopGear]

Bedankt voor de tip thijs, maar ik doe het liever zo

[Thijsg]

Bedankt voor de tip chris, maar ik doe het liever zo

Ok, maar zou je wel mijn naam goed willen spellen?

[TopGear]

Je hebt mij citaat veranderd!

Nee, sorry, grapje.
Ik zat met mijn hoofd bij wiskunde pw, dus ik lette niet zo erg op XD

[Thijsg]

Je hebt mij citaat veranderd!

Nee, sorry, grapje.
Ik zat met mijn hoofd bij wiskunde pw, dus ik lette niet zo erg op XD

Nog vragen over wiskunde? XD

[TopGear]

Kan je me uitleggen wat de
1) stelling van Thales is?
2) de hpq stelling is?
3) de back stelling is?

De Pythagoras stelling snap ik wel.

[Thijsg]

Kan je me uitleggen wat de
1) stelling van Thales is?
2) de hpq stelling is?
3) de back stelling is?

De Pythagoras stelling snap ik wel.

1) Op ieder punt van de cirkelboog is de afstand tot het middelpunt even groot als de afstanden van de punten links en rechts tot het middelpunt. Daarom is de driehoek tussen het middelpunt, het punt links en het punt op de cirkel gelijkbening. Dat geldt ook voor de driehoek door het middelpunt, het punt rechts en het punt op de cirkel. De vier hoeken op de cirkel zijn bij elkaar 180 graden. De hoek bij het punt is dan 90 graden. Denk aan de gelijkbenigheid.

De rest ken ik niet, Google wist het ook niet.

[TopGear]

Lol, de bach stelling

[Thijsg]

Lol, de bach stelling

Zullen we verder typen in de Stamkroeg, dat gaat Gijsbert leuk vinden? 8)

Verder snap ik niet wat hpq of back is, wat is het en wat snap je niet?

[Erik_m]

Deze is ook wel aardig. Ubuntu (Studio) 9.04, Conky 1.72...

http://www.xs4all.nl/~mrgarden/images/1121.png

... en dit is m'n conkyrc:

Code: [Selecteer]

# Conky, a system monitor, based on torsmo
#
# Any original torsmo code is licensed under the BSD license
#
# All code written since the fork of torsmo is licensed under the GPL
#
# Please see COPYING for details
#
# Copyright (c) 2004, Hannu Saransaari and Lauri Hakkarainen
# Copyright (c) 2005-2007 Brenden Matthews, Philip Kovacs, et. al. (see AUTHORS)
# All rights reserved.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
#
# $Id: conky.conf 1193 2008-06-21 20:37:58Z ngarofil $

alignment bottom_right
use_xft yes
xftfont Stonehenge:size=20
#xftfont 123:size=8
xftalpha 0.1
background no
border_width 1
cpu_avg_samples 2
default_color white
default_outline_color white
default_shade_color white
draw_borders no
draw_graph_borders yes
draw_outline no
draw_shades no
font 6x10
gap_x 10
gap_y 20
minimum_size 5 5
net_avg_samples 2
no_buffers yes
out_to_console no
# own_window yes
# own_window_class Conky
# own_window_type desktop
# own_window_transparent yes
# own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
stippled_borders 0
update_interval 0.5
total_run_times 0
uppercase no
use_spacer none
show_graph_scale no
show_graph_range no
double_buffer yes
# override_utf8_locale no
imlib_cache_size 0
TEXT
${image /etc/conky/images/_.png -p 0,0 -s 256x100}
${image /etc/conky/images/tuxguitar.tif -p 150,10 -s 36x36}


${font Stonehenge:bold:size=10}${color Tan2}CALENDAR ${color red}$hr$color${font Stonehenge:size=20}
${time %A} ${time %d} ${time %B}
${color red}$hr$color
${font LCDMono :size=12}
${pre_exec ~/Conky/scripts/calendario.sh semana}
${color 888888}${pre_exec ~/Conky/scripts/calendario.sh pasado}${color Tan2}${pre_exec ~/Conky/scripts/calendario.sh hoy}${color 888888}${pre_exec ~/Conky/scripts/calendario.sh futuro}${font}
${font Stonehenge:bold:size=10}${color Tan2}TIME ${color red}$hr
${color CCCCCC} ${font Stonehenge:size=30}$alignc${time %H:%M:%S}
${voffset -30}${font Stonehenge:bold:size=10}
${font Stonehenge:bold:size=10}${color Tan2}SOUND ${color red}$hr
${color gold}${scroll 24 $nodename - Ubuntu Studio - Linux $kernel}
${font Stonehenge:bold:size=10}${color Tan2}SYSTEM ${color red}${hr}
${font Stonehenge:normal:size=10}${color 2490ff}Uptime:${font LCDMono :size=11}${color 888888} $uptime
${font Stonehenge:normal:size=10}${color 2490ff}Frequency (in MHz):${font LCDMono :size=11}${color 888888} $freq
${font Stonehenge:normal:size=10}${color 2490ff}Frequency (in GHz):${font LCDMono :size=11}${color 888888} $freq_g
${font Stonehenge:normal:size=10}${color 2490ff}RAM Usage:${font LCDMono :size=11}${color 888888} $mem / $memmax
${font Stonehenge:normal:size=10}${color 2490ff}Swap Usage:${color 888888}${font LCDMono :size=11} $swap/$swapmax - $swapperc% ${color 0412cd}${swapbar 4}
${font Stonehenge:normal:size=10}${color 2490ff}CPU Usage:${color 888888}${font LCDMono :size=11} $cpu% ${color 0412cd}${cpubar 4}
${font Stonehenge:normal:size=10}${color 2490ff}Processes:${color 888888}${font LCDMono :size=11} $processes  ${color 2490ff}${font Stonehenge:normal:size=10}Running:${font LCDMono :size=11}${color 888888} $running_processes
${color red}${hr}
${font Stonehenge:bold:size=10}${color tan2}FILE SYSTEMS / NETWORKING
${color red}${hr}
${color 0412cd}${fs_free /}/${fs_size /} ${color 0412cd}${fs_bar 6 /}
${color #0000ff}${downspeedgraph eth0 15,150 ff0000 0000ff} ${color #22ccff}${upspeedgraph eth0 15,150 0000ff ff0000}
ETH0 Up:${color} ${upspeed eth0} k/s${color darkgreen} - Down:${color} ${downspeed eth0} k/s
${color #0000ff}${downspeedgraph lan0 15,150 ff0000 0000ff} ${color #22ccff}${upspeedgraph lan0 15,150 0000ff ff0000}
LAN0 Up:${color} ${upspeed lan0} k/s${color darkgreen} - Down:${color} ${downspeed lan0} k/s
${color red}$hr
Moderator edit: code tags toegevoegd.

Waarom begint jouw week op maandag en de mijne op zondag als ik dit letterlijk kopieer? :s