Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Actiontec 802UI3 & ndiswrapper  (gelezen 776 keer)

MystyxMac

  • Gast
Actiontec 802UI3 & ndiswrapper
« Gepost op: 2008/01/07, 19:02:06 »
Ik gebruik Ubuntu 7.10 en wil mijn Actiontec wireless USB adapter installeren op mijn laptop.

Ik gebruik hiervoor ndiswrapper.
Ik heb verschillende versies gebruikt, maar allen werken niet goed. Ik denk dus dat het ergens anders aan ligt maar weet niet wat. Misschien weet iemand hier wel wat er fout is.
De versies die ik heb gebruikt zijn:

1) Versie van Synaptic.
2) ndiswrapper-1.51 (nieuwste volgens de site)
3) ndiswrapper de SVN versie.

Verschillende USB poorten geprobeerd, maar krijg iedere keer dezelfde foutmelding.
Ik heb ook gebruik gemaakt van ndisgtk, maar dat werkt ook niet.

Ik gebruik de Windows XP drivers van de Actiontec site.

Ik krijg de volgende foutmelding bij dmesg:

Citaat
[ 3469.688000] ndiswrapper version 1.51 loaded (smp=yes, preempt=no)
[ 3469.820000] usb 1-1: reset full speed USB device using uhci_hcd and address 4
[ 3470.088000] ndiswrapper: driver aeiwlnic (Actiontec,09/24/2002, 2.00.09) loaded
[ 3470.088000] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000010
[ 3470.088000] printing eip:
[ 3470.088000] f907b4d1
[ 3470.088000] *pde = 00000000
[ 3470.088000] Oops: 0000 [#1]
[ 3470.088000] SMP
[ 3470.088000] Modules linked in: ndiswrapper nls_cp437 isofs udf af_packet binfmt_misc i915 drm ipv6 rfcomm l2cap bluetooth ppdev snd_atiixp_modem snd_via82xx_modem snd_intel8x0m speedstep_ich speedstep_lib cpufreq_ondemand cpufreq_userspace cpufreq_stats freq_table cpufreq_conservative cpufreq_powersave sbs video ac container battery dock button parport_pc lp parport joydev snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device pcmcia snd soundcore pcspkr usbhid snd_page_alloc psmouse iTCO_wdt iTCO_vendor_support hid serio_raw yenta_socket rsrc_nonstatic pcmcia_core shpchp pci_hotplug intel_agp agpgart evdev ext3 jbd mbcache sg sd_mod sr_mod cdrom ata_piix ata_generic libata scsi_mod b44 mii ehci_hcd uhci_hcd usbcore thermal processor fan fuse apparmor commoncap
[ 3470.088000] CPU: 0
[ 3470.088000] EIP: 0060:[] Tainted: P VLI
[ 3470.088000] EFLAGS: 00010206 (2.6.22-14-generic #1)
[ 3470.088000] EIP is at NdisMQueryAdapterResources+0x31/0xd0 [ndiswrapper]
[ 3470.088000] eax: 0000000c ebx: cd44bb0c ecx: 00000018 edx: dfdcab00
[ 3470.088000] esi: f9079180 edi: dfdcabe8 ebp: cd44bb10 esp: cd44ba6c
[ 3470.088000] ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
[ 3470.088000] Process modprobe (pid: 10076, ti=cd44a000 task=d6b134c0 task.ti=cd44a000)
[ 3470.088000] Stack: 0000000c 00000000 f9079180 dfdcabe8 cd44bb18 f8f494a8 cd44bb10 ce33c800
[ 3470.088000] cd44baa0 cd44bb0c 00000000 00000000 ce33c800 e234f5c0 00000000 f908659b
[ 3470.088000] e234f5c0 cd44bad4 f907b392 cd44bad4 cd44baec ce33c800 cd44bad4 00000002
[ 3470.088000] Call Trace:
[ 3470.088000] [] NdisAllocateSpinLock+0x0/0x20 [ndiswrapper]
[ 3470.088000] [] RtlFreeUnicodeString+0x1b/0x40 [ndiswrapper]
[ 3470.088000] [] NdisReadNetworkAddress+0xa2/0x1b0 [ndiswrapper]
[ 3470.088000] [] mp_init+0xa4/0x1f0 [ndiswrapper]
[ 3470.088000] [] NdisDispatchPnp+0xd9/0x1000 [ndiswrapper]
[ 3470.088000] [] __switch_to+0xaa/0x1d0
[ 3470.088000] [] __activate_task+0x21/0x40
[ 3470.088000] [] try_to_wake_up+0x46/0x480
[ 3470.088000] [] __switch_to+0xaa/0x1d0
[ 3470.088000] [] __switch_to+0xaa/0x1d0
[ 3470.088000] [] schedule+0x515/0x890
[ 3470.088000] [] IoAllocateIrp+0x5b/0x80 [ndiswrapper]
[ 3470.088000] [] _spin_lock_bh+0x8/0x20
[ 3470.088000] [] get_current_nt_thread+0x44/0x50 [ndiswrapper]
[ 3470.088000] [] IofCallDriver+0x55/0xc0 [ndiswrapper]
[ 3470.088000] [] IoSendIrpTopDev+0xbb/0x120 [ndiswrapper]
[ 3470.088000] [] pnp_start_device+0x50/0xb0 [ndiswrapper]
[ 3470.088000] [] wrap_pnp_start_device+0x1e3/0x290 [ndiswrapper]
[ 3470.088000] [] wrap_pnp_start_usb_device+0xa6/0xd0 [ndiswrapper]
[ 3470.088000] [] sysfs_make_dirent+0x2f/0x50
[ 3470.088000] [] mutex_lock+0x8/0x20
[ 3470.088000] [] usb_autopm_do_device+0x6d/0x100 [usbcore]
[ 3470.088000] [] usb_match_one_id+0x27/0xb0 [usbcore]
[ 3470.088000] [] usb_probe_interface+0x96/0xe0 [usbcore]
[ 3470.088000] [] driver_probe_device+0x8e/0x190
[ 3470.088000] [] __driver_attach+0x9e/0xa0
[ 3470.088000] [] bus_for_each_dev+0x3b/0x60
[ 3470.088000] [] driver_attach+0x16/0x20
[ 3470.088000] [] __driver_attach+0x0/0xa0
[ 3470.088000] [] bus_add_driver+0x8a/0x1b0
[ 3470.088000] [] usb_register_driver+0x8e/0x110 [usbcore]
[ 3470.088000] [] loader_init+0x185/0x230 [ndiswrapper]
[ 3470.088000] [] wrap_procfs_init+0x3f/0xb0 [ndiswrapper]
[ 3470.088000] [] wrapper_init+0xb7/0xc2 [ndiswrapper]
[ 3470.088000] [] sys_init_module+0x151/0x1a00
[ 3470.088000] [] prio_tree_insert+0x1f/0x250
[ 3470.088000] [] sysenter_past_esp+0x6b/0xa9
[ 3470.088000] =======================
[ 3470.088000] Code: 1c 89 5c 24 04 8b 5c 24 24 89 6c 24 10 8b 6c 24 18 89 74 24 08 89 7c 24 0c 8b 80 9c 01 00 00 8b 40 04 8b 40 68 83 c0 0c 89 04 24 <8b> 48 04 8b 33 89 c8 c1 e0 04 83 c0 08 83 fe 17 77 1f 89 03 c7
[ 3470.088000] EIP: [] NdisMQueryAdapterResources+0x31/0xd0 [ndiswrapper] SS:ESP 0068:cd44ba6c

MystyxMac

  • Gast
Actiontec 802UI3 & ndiswrapper
« Reactie #1 Gepost op: 2008/01/09, 23:28:59 »
Hehe, laat deze fout dus maar zitten.
Ik ben er achter gekomen dat Ubuntu Gutsy standaard de prism2 drivers heeft.

Echter heb nu een ander probleem. Ik krijg geen verbinding met mijn draadloze netwerk.

ifconfig:
Citaat
eth0      Link encap:Ethernet  HWaddr 00:11:43:6A:20:29  
          inet addr:192.168.1.5  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::211:43ff:fe6a:2029/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1319  Metric:1
          RX packets:12750 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4795 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:4089985 (3.9 MB)  TX bytes:726184 (709.1 KB)
          Interrupt:7

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
iwconfig:
Citaat
lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     no wireless extensions.
lshw -C network
Citaat
*-network              
       description: Ethernet interface
       product: BCM4401 100Base-T
       vendor: Broadcom Corporation
       physical id: 1
       bus info: pci@0000:02:01.0
       logical name: eth0
       version: 01
       serial: 00:11:43:6a:20:29
       width: 32 bits
       clock: 33MHz
       capabilities: bus_master cap_list ethernet physical
       configuration: broadcast=yes driver=b44 driverversion=1.01 ip=192.168.1.5 latency=32 module=b44 multicast=yes
  *-network DISABLED
       description: Ethernet interface
       physical id: 1
       logical name: wlan0
       capabilities: ethernet physical
       configuration: broadcast=yes multicast=yes
Waarom is wlan0 DISABLED??? Hoe krijg ik die ENABLED?