Nieuws:

We zijn er weer.

Na lange tijd van afwezigheid zijn we er weer  :laugh:
We hebben alle wachtwoorden gereset, je oude wachtwoord werkt niet meer.Je moet via het "wachtwoord vergeten"-linkje je wachtwoord resetten. Je krijgt hiervoor een mailtje op het adres dat je bij ons geregistreerd hebt.

De komende tijd zijn we nog druk bezig om de rest van de site op te bouwen, dus het kan zijn dat sommige onderdelen (tijdelijk) niet werken.

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: dubbele entries in mijn xorg.conf  (gelezen 414 keer)

Bandicoot

  • Gast
dubbele entries in mijn xorg.conf
« Gepost op: 2007/12/01, 11:20:51 »
Ik heb in mijn xorg.conf dubbele entries staan voor mijn videokaart en mijn beeldscherm, ik vraag me af of dit wel klopt en zo niet hoe het er dan wel uit zou moeten zien , dit is mijn xorg.conf:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder3)  Wed Sep 12 14:30:30 PDT 2007

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
# InputDevice     "stylus" "SendCoreEvents"
# InputDevice     "cursor" "SendCoreEvents"
# InputDevice     "eraser" "SendCoreEvents"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "us"
    Option         "XkbVariant" "intl"
    Option         "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ImPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "DELL 1908FP"
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "DELL 1908FP"
    HorizSync       31.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Device"
    Identifier     "nVidia Corporation NV40.2 [GeForce 6800 LE]"
    Driver         "nvidia"
    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"
    Option         "NoLogo" "True"
    Option         "UseEdidDpi" "False"
    Option         "DPI" "96 x 96"
    BusID          "PCI:1:0:0"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 6800 LE"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "nVidia Corporation NV40.2 [GeForce 6800 LE]"
    Monitor        "DELL 1908FP"
    DefaultDepth    24
    SubSection     "Display"
        Modes      "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1280x1024_60 +0+0; 1280x1024 +0+0; 1152x864 +0+0; 1024x768 +0+0; 800x600 +0+0; 640x480 +0+0"
EndSection

Offline Bobbie

  • Lid
  • Steunpunt: Nee
dubbele entries in mijn xorg.conf
« Reactie #1 Gepost op: 2007/12/01, 14:10:28 »
Zo te zien is het een te veel,zie mijn lijst

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" "intl"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "nVidia Corporation NV34 [GeForce FX 5500]"
Driver "nvidia"
Busid "PCI:1:0:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection

Section "Monitor"
Identifier "hp L1730"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV34 [GeForce FX 5500]"
Monitor "hp L1730"
Defaultdepth 24
SubSection "Display"
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
  screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice     "stylus" "SendCoreEvents"
# InputDevice     "cursor" "SendCoreEvents"
# InputDevice     "eraser" "SendCoreEvents"
EndSection
Section "Module"
Load "glx"
EndSection
Dus kan weggehaald worden
Wil je je gelijk, of wil je geluk?
Handige tips voor beginners: http://sites.google.com/site/computertip/