Nieuws:

We zijn er weer.

Na lange tijd van afwezigheid zijn we er weer  :laugh:
We hebben alle wachtwoorden gereset, je oude wachtwoord werkt niet meer.Je moet via het "wachtwoord vergeten"-linkje je wachtwoord resetten. Je krijgt hiervoor een mailtje op het adres dat je bij ons geregistreerd hebt.

De komende tijd zijn we nog druk bezig om de rest van de site op te bouwen, dus het kan zijn dat sommige onderdelen (tijdelijk) niet werken.

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: draadloos internet valt soms uit...  (gelezen 3714 keer)

driesdep

  • Gast
draadloos internet valt soms uit...
« Gepost op: 2007/08/27, 00:07:27 »
hoi
ik zit met een mini-probleem ivm mijn draadloos internet.
Ik werk met een access point van Dlink, en een USB stick van Dlink op mijn pc aangesloten.
Dit werkt normaal goed, maar soms (na een goed uur ofzo) valt mijn stick van mijn Dlink uit. (geen lichtjes meer die branden).
Ik moet dan opnieuw mijn pc gaan heropstarten, en we zijn dan weer vertrokken...

Kennen jullie soms een oplossing/alternatieven om dit probleem op te lossen ???

Bedankt ...

Offline Pjotr

  • Lid
    • http://sites.google.com/site/computertip
  • Steunpunt: Nee
draadloos internet valt soms uit...
« Reactie #1 Gepost op: 2007/08/27, 09:22:13 »
Lijkt me meer een hardewaar-probleem.... beschadigde / rotte USB staaf?

driesdep

  • Gast
draadloos internet valt soms uit...
« Reactie #2 Gepost op: 2007/08/27, 21:58:49 »
nee, die staat op mijn bureau ... Werkt nochthans perfect in windows ...
(ik zit met een dual boot he )

Offline siegi

  • Lid
  • Steunpunt: Nee
draadloos internet valt soms uit...
« Reactie #3 Gepost op: 2007/08/27, 22:00:40 »
Kan ook een probleem zijn met de driver.  Werkte hij out of the box of heb je ndiswrapper ofzoiets gebruikt.

driesdep

  • Gast
draadloos internet valt soms uit...
« Reactie #4 Gepost op: 2007/08/29, 02:38:51 »
Ik heb met die stick zekers meer dan een jaar probleemloos gewerkt op windows (wat nog steeds het geval is), maar onder linux valt het lampje "link" (en dus internet), meer dan regelmatig uit, waardoor ik dan heel den boel moet heropstarten, om dan terug op internet te kunnen (wat natuurlijk uiterst vervelend is ...).

Aan mijn hardware kan het dus volgens mij moeilijk liggen ( aan wat anders weet ik niet...
Mijn wepkey is wel hex ingesteld,- niet met ascii... Ik weet niet of dit een evt verschil kan uitmaken ...)

Ndiswapper gebruik ik niet . Gewoon via systeem mijn boeltje ingevuld ...

Offline Pjotr

  • Lid
    • http://sites.google.com/site/computertip
  • Steunpunt: Nee
draadloos internet valt soms uit...
« Reactie #5 Gepost op: 2007/08/29, 10:15:24 »
Driverprobleem, denk ik; ik ben het eens met Siegi.

Op 18 oktober komt Ubuntu 7.10 uit, met splinternieuwe drivers in een splinternieuwe Linuxkernel. Mogelijk ben je dan van dat probleem af.

driesdep

  • Gast
draadloos internet valt soms uit...
« Reactie #6 Gepost op: 2007/08/29, 12:28:17 »
ahzo, wel : dat hou ik wel uit ;-) !

Bedankt voor het nodige advies !!

Offline marks

  • Lid
  • Steunpunt: Nee
draadloos internet valt soms uit...
« Reactie #7 Gepost op: 2007/11/30, 16:27:43 »
Ik heb hetzelfde nu in Gutsy. Heeft iemand een oplossing? Het gebeurt op de één of andere manier vaak bij het omzetten van (zelfgekochte) cd's in Mp3.

Offline Scormen

  • Lid
    • LinuxOntdekt.Be
  • Steunpunt: Nee
draadloos internet valt soms uit...
« Reactie #8 Gepost op: 2007/11/30, 21:03:27 »
Wat geeft lspci ?

Er zijn meerdere met dit probleem, telkens met deze kaart:  Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection.

Kris
Ubuntu gebruiker #18341 | Linux gebruiker #456955
· Mijn persoonlijke Linux blog

Offline Johan van Dijk

  • Administrator
    • johanvandijk
  • Steunpunt: Nee
draadloos internet valt soms uit...
« Reactie #9 Gepost op: 2007/11/30, 21:10:36 »
Als het om een usb stick gaat moet je lsusb intikken in plaats van lspci.
Kan je ook eens dmesg intikken en in de laatste regels kijken of daar foutmeldingen staan?

Offline marks

  • Lid
  • Steunpunt: Nee
draadloos internet valt soms uit...
« Reactie #10 Gepost op: 2007/12/01, 11:15:11 »
Lsusb:

Bus 008 Device 001: ID 0000:0000  
Bus 005 Device 001: ID 0000:0000  
Bus 005 Device 002: ID 2001:3c00 D-Link Corp. [hex] DWL-G122 802.11g rev. B1 [ralink]
Bus 007 Device 001: ID 0000:0000  
Bus 006 Device 005: ID 04a9:1718 Canon, Inc.
Bus 006 Device 004: ID 058f:6362 Alcor Micro Corp.
Bus 006 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  
Bus 003 Device 002: ID 0db0:6970 Micro Star International
Bus 003 Device 001: ID 0000:0000  
Bus 001 Device 004: ID 045e:0039 Microsoft Corp. IntelliMouse Optical
Bus 001 Device 001: ID 0000:0000  

dmesg

post a report
[   36.665343] NET: Registered protocol family 8
[   36.665346] NET: Registered protocol family 20
[   36.665415] pnp: 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[   36.665419] pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[   36.669047] Time: tsc clocksource has been installed.
[   36.695752] PCI: Bridge: 0000:00:01.0
[   36.695755]   IO window: disabled.
[   36.695760]   MEM window: fc900000-fe9fffff
[   36.695764]   PREFETCH window: cff00000-efefffff
[   36.695769] PCI: Bridge: 0000:00:1e.0
[   36.695773]   IO window: 9000-9fff
[   36.695778]   MEM window: fea00000-feafffff
[   36.695782]   PREFETCH window: 70000000-700fffff
[   36.695800] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   36.695812] NET: Registered protocol family 2
[   36.733094] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   36.733228] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[   36.734517] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   36.735002] TCP: Hash tables configured (established 131072 bind 65536)
[   36.735006] TCP reno registered
[   36.745235] checking if image is initramfs... it is
[   37.196220] Switched to high resolution mode on CPU 0
[   37.196315] Switched to high resolution mode on CPU 1
[   37.324038] Freeing initrd memory: 7349k freed
[   37.324684] audit: initializing netlink socket (disabled)
[   37.324704] audit(1196502914.228:1): initialized
[   37.324815] highmem bounce pool size: 64 pages
[   37.327171] VFS: Disk quotas dquot_6.5.1
[   37.327235] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   37.327346] io scheduler noop registered
[   37.327349] io scheduler anticipatory registered
[   37.327351] io scheduler deadline registered
[   37.327367] io scheduler cfq registered (default)
[   37.327458] Boot video device is 0000:01:00.0
[   37.327662] isapnp: Scanning for PnP cards...
[   37.679008] isapnp: No Plug & Play device found
[   37.706092] Real Time Clock Driver v1.12ac
[   37.706198] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   37.706292] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   37.707038] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   37.707910] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   37.708057] input: Macintosh mouse button emulation as /class/input/input0
[   37.708147] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   37.708150] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   37.710176] serio: i8042 KBD port at 0x60,0x64 irq 1
[   37.710184] serio: i8042 AUX port at 0x60,0x64 irq 12
[   37.710346] mice: PS/2 mouse device common for all mice
[   37.710485] EISA: Probing bus 0 at eisa.0
[   37.710524] EISA: Detected 0 cards.
[   37.710622] TCP cubic registered
[   37.710635] NET: Registered protocol family 1
[   37.710657] Using IPI No-Shortcut mode
[   37.710824]   Magic number: 3:953:928
[   37.710926]   hash matches device ptyxd
[   37.711355] Freeing unused kernel memory: 364k freed
[   37.743426] input: AT Translated Set 2 keyboard as /class/input/input1
[   38.945026] AppArmor: AppArmor initialized<5>audit(1196502915.728:2):  type=1505 info="AppArmor initialized" pid=1195
[   38.954327] fuse init (API version 7.8)
[   38.959891] Failure registering capabilities with primary security module.
[   38.994872] ACPI: Processor [CPU1] (supports 8 throttling states)
[   38.994896] ACPI: Processor [CPU2] (supports 8 throttling states)
[   39.628685] SCSI subsystem initialized
[   39.632452] usbcore: registered new interface driver usbfs
[   39.632488] usbcore: registered new interface driver hub
[   39.632532] usbcore: registered new device driver usb
[   39.637839] libata version 2.21 loaded.
[   39.641065] ata_piix 0000:00:1f.1: version 2.11
[   39.641088] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[   39.641105] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
[   39.641169] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   39.641293] scsi0 : ata_piix
[   39.641382] scsi1 : ata_piix
[   39.641571] ata1: PATA max UDMA/133 cmd 0x0001c000 ctl 0x0001bc02 bmdma 0x0001b000 irq 16
[   39.641576] ata2: PATA max UDMA/133 cmd 0x0001b800 ctl 0x0001b402 bmdma 0x0001b008 irq 16
[   39.643292] USB Universal Host Controller Interface driver v3.0
[   39.757048] 8139too Fast Ethernet driver 0.9.28
[   39.759610] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   39.768473] Floppy drive(s): fd0 is 1.44M
[   39.816145] FDC 0 is a post-1991 82077
[   39.869501] ata1.00: ATA-6: WDC WD1600JB-00GVA0, 08.02D08, max UDMA/100
[   39.869506] ata1.00: 312581808 sectors, multi 16: LBA48
[   39.869803] ata1.01: ATA-6: ST380011A, 3.06, max UDMA/100
[   39.869806] ata1.01: 156301488 sectors, multi 16: LBA48
[   39.885454] ata1.00: configured for UDMA/100
[   39.900298] ata1.01: configured for UDMA/100
[   40.383486] ata2.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
[   40.383492] ata2.01: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L23, max UDMA/33
[   40.555213] ata2.00: configured for UDMA/33
[   40.726906] ata2.01: configured for UDMA/33
[   40.727061] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JB-00G 08.0 PQ: 0 ANSI: 5
[   40.727224] scsi 0:0:1:0: Direct-Access     ATA      ST380011A        3.06 PQ: 0 ANSI: 5
[   40.728382] scsi 1:0:0:0: CD-ROM            _NEC     DVD_RW ND-3520A  1.04 PQ: 0 ANSI: 5
[   40.743675] scsi 1:0:1:0: CD-ROM            HL-DT-ST DVD-ROM GDR8163B 0L23 PQ: 0 ANSI: 5
[   40.745880] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
[   40.745896] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   40.745902] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   40.746177] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   40.746215] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000cc00
[   40.746400] usb usb1: configuration #1 chosen from 1 choice
[   40.746444] hub 1-0:1.0: USB hub found
[   40.746459] hub 1-0:1.0: 2 ports detected
[   40.766695] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   40.766726] sd 0:0:0:0: [sda] Write Protect is off
[   40.766731] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   40.766770] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   40.766869] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   40.766888] sd 0:0:0:0: [sda] Write Protect is off
[   40.766893] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   40.766929] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   40.766938]  sda: sda1 sda2 sda3
[   40.787859] sd 0:0:0:0: [sda] Attached SCSI disk
[   40.787960] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[   40.787977] sd 0:0:1:0: [sdb] Write Protect is off
[   40.787981] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[   40.788011] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   40.788075] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[   40.788092] sd 0:0:1:0: [sdb] Write Protect is off
[   40.788096] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[   40.788127] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   40.788132]  sdb: sdb1 sdb2 < sdb5 >
[   40.826568] sd 0:0:1:0: [sdb] Attached SCSI disk
[   40.833861] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   40.833994] sd 0:0:1:0: Attached scsi generic sg1 type 0
[   40.834041] sr 1:0:0:0: Attached scsi generic sg2 type 5
[   40.834082] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[   40.846603] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 18
[   40.846620] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   40.846626] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   40.846663] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   40.846693] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000d000
[   40.846833] usb usb2: configuration #1 chosen from 1 choice
[   40.846879] hub 2-0:1.0: USB hub found
[   40.846890] hub 2-0:1.0: 2 ports detected
[   40.854836] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[   40.854845] Uniform CD-ROM driver Revision: 3.20
[   40.854952] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   40.879834] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[   40.879924] sr 1:0:1:0: Attached scsi CD-ROM sr1
[   40.950456] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
[   40.950474] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   40.950480] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   40.950523] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   40.950554] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000d400
[   40.950717] usb usb3: configuration #1 chosen from 1 choice
[   40.950766] hub 3-0:1.0: USB hub found
[   40.950776] hub 3-0:1.0: 2 ports detected
[   41.054265] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17
[   41.054283] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   41.054289] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   41.054330] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   41.054361] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000d800
[   41.054509] usb usb4: configuration #1 chosen from 1 choice
[   41.054551] hub 4-0:1.0: USB hub found
[   41.054562] hub 4-0:1.0: 2 ports detected
[   41.086057] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   41.158212] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 19
[   41.158320] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[   41.158334] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   41.158340] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   41.158375] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   41.158421] ehci_hcd 0000:00:1d.7: debug port 1
[   41.158429] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   41.158441] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebffc00
[   41.158592] eth0: RealTek RTL8139 at 0xf8814e00, 00:11:09:93:d5:b3, IRQ 19
[   41.158596] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   41.162381] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   41.217867] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   41.218067] usb usb5: configuration #1 chosen from 1 choice
[   41.218113] hub 5-0:1.0: USB hub found
[   41.218125] hub 5-0:1.0: 8 ports detected
[   41.235388] Attempting manual resume
[   41.235393] swsusp: Resume From Partition 8:21
[   41.235395] PM: Checking swsusp image.
[   41.268420] PM: Resume from disk failed.
[   41.313363] kjournald starting.  Commit interval 5 seconds
[   41.313379] EXT3-fs: mounted filesystem with ordered data mode.
[   41.321914] ACPI: PCI Interrupt 0000:02:03.2[C] -> GSI 17 (level, low) -> IRQ 20
[   41.321936] ehci_hcd 0000:02:03.2: EHCI Host Controller
[   41.321984] ehci_hcd 0000:02:03.2: new USB bus registered, assigned bus number 6
[   41.345643] ehci_hcd 0000:02:03.2: irq 20, io mem 0xfeafff00
[   41.345656] ehci_hcd 0000:02:03.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
[   41.345801] usb usb6: configuration #1 chosen from 1 choice
[   41.345834] hub 6-0:1.0: USB hub found
[   41.345846] hub 6-0:1.0: 5 ports detected
[   41.449631] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 18
[   41.449657] ohci_hcd 0000:02:03.0: OHCI Host Controller
[   41.449708] ohci_hcd 0000:02:03.0: new USB bus registered, assigned bus number 7
[   41.449731] ohci_hcd 0000:02:03.0: irq 18, io mem 0xfeafd000
[   41.625182] usb 1-1: device not accepting address 2, error -71
[   42.010744] usb usb7: configuration #1 chosen from 1 choice
[   42.010788] hub 7-0:1.0: USB hub found
[   42.010803] hub 7-0:1.0: 3 ports detected
[   42.176319] usb 5-1: new high speed USB device using ehci_hcd and address 2
[   42.467506] usb 5-1: configuration #1 chosen from 1 choice
[   42.523874] ACPI: PCI Interrupt 0000:02:03.1 -> GSI 16 (level, low) -> IRQ 17
[   42.523892] ohci_hcd 0000:02:03.1: OHCI Host Controller
[   42.523923] ohci_hcd 0000:02:03.1: new USB bus registered, assigned bus number 8
[   42.523938] ohci_hcd 0000:02:03.1: irq 17, io mem 0xfeafe000
[   43.084996] usb usb8: configuration #1 chosen from 1 choice
[   43.085028] hub 8-0:1.0: USB hub found
[   43.085039] hub 8-0:1.0: 2 ports detected
[   43.126806] usb 6-3: new high speed USB device using ehci_hcd and address 2
[   43.261771] usb 6-3: configuration #1 chosen from 1 choice
[   43.498214] usb 1-2: new low speed USB device using uhci_hcd and address 4
[   43.680030] usb 1-2: configuration #1 chosen from 1 choice
[   43.921547] usb 3-1: new full speed USB device using uhci_hcd and address 2
[   44.164867] usb 3-1: configuration #1 chosen from 1 choice
[   49.223364] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   49.226916] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   49.338241] intel_rng: FWH not detected
[   49.455679] Linux agpgart interface v0.102 (c) Dave Jones
[   49.597079] agpgart: Detected an Intel 865 Chipset.
[   49.603787] agpgart: AGP aperture is 128M @ 0xf0000000
[   49.691358] iTCO_vendor_support: vendor-support=0
[   49.708662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   49.708774] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[   49.708832] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   50.453392] nvidia: module license 'NVIDIA' taints kernel.
[   50.706469] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[   50.706729] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.23  Thu Oct  4 10:16:34 PDT 2007
[   50.757995] Bluetooth: Core ver 2.11
[   50.758067] NET: Registered protocol family 31
[   50.758070] Bluetooth: HCI device and connection manager initialized
[   50.758075] Bluetooth: HCI socket layer initialized
[   50.774990] input: PC Speaker as /class/input/input2
[   50.805398] Bluetooth: HCI USB driver ver 2.9
[   50.807423] usbcore: registered new interface driver hci_usb
[   50.902775] usbcore: registered new interface driver hiddev
[   50.914884] parport_pc 00:0a: reported by Plug and Play ACPI
[   50.914909] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   50.917255] input: Microsoft Microsoft IntelliMouse� Optical as /class/input/input3
[   50.917351] input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse� Optical] on usb-0000:00:1d.0-2
[   50.917373] usbcore: registered new interface driver usbhid
[   50.917379] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   51.037332] idVendor = 0x2001, idProduct = 0x3c00
[   51.037600] usbcore: registered new interface driver rt2570
[   51.188383] usbcore: registered new interface driver libusual
[   51.297135] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   51.297141] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   51.307381] Initializing USB Mass Storage driver...
[   51.307466] scsi2 : SCSI emulation for USB Mass Storage devices
[   51.307541] usbcore: registered new interface driver usb-storage
[   51.307545] USB Mass Storage support registered.
[   51.307676] usb-storage: device found at 2
[   51.307679] usb-storage: waiting for device to settle before scanning
[   51.326854] usbcore: registered new interface driver rt2500usb
[   51.359593] RT25usb Driver version 1.0.0
[   52.405995] ***rt2x00***: Interface goes up for the first time, activating permanent MAC
[   52.406003] ***rt2x00***: Active MAC is: 00:13:46:ea:06:b2.
[   52.444659] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 17 (level, low) -> IRQ 20
[   52.444688] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   52.767533] intel8x0_measure_ac97_clock: measured 54716 usecs
[   52.767537] intel8x0: clocking to 48000
[   53.352272] lp0: using parport0 (interrupt-driven).
[   53.420801] ndiswrapper version 1.45 loaded (smp=yes)
[   53.446029] usbcore: registered new interface driver ndiswrapper
[   53.501736] Adding 3229024k swap on /dev/sdb5.  Priority:-1 extents:1 across:3229024k
[   53.842956] EXT3 FS on sdb1, internal journal
[   53.897149] NET: Registered protocol family 17
[   56.298600] usb-storage: device scan complete
[   56.299216] scsi 2:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[   56.299712] scsi 2:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[   56.300211] scsi 2:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[   56.300709] scsi 2:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[   56.302627] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[   56.302705] sd 2:0:0:0: Attached scsi generic sg4 type 0
[   56.304491] sd 2:0:0:1: [sdd] Attached SCSI removable disk
[   56.304550] sd 2:0:0:1: Attached scsi generic sg5 type 0
[   56.306391] sd 2:0:0:2: [sde] Attached SCSI removable disk
[   56.306461] sd 2:0:0:2: Attached scsi generic sg6 type 0
[   56.308913] sd 2:0:0:3: [sdf] Attached SCSI removable disk
[   56.308989] sd 2:0:0:3: Attached scsi generic sg7 type 0
[   57.009396] input: Power Button (FF) as /class/input/input4
[   57.009426] ACPI: Power Button (FF) [PWRF]
[   57.009498] input: Power Button (CM) as /class/input/input5
[   57.009521] ACPI: Power Button (CM) [PWRB]
[   57.043918] No dock devices found.
[   58.602774] ppdev: user-space parallel port driver
[   58.881005] eth0: link down
[   58.970346] audit(1196499336.399:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5064 profile="/usr/sbin/cupsd"
[   59.078415] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   59.078423] apm: disabled - APM is not SMP safe.
[   59.372814] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   59.439761] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   59.456692] NFSD: starting 90-second grace period
[   60.581416] Failure registering capabilities with primary security module.
[   60.765516] Bluetooth: L2CAP ver 2.8
[   60.765523] Bluetooth: L2CAP socket layer initialized
[   60.901954] Bluetooth: RFCOMM socket layer initialized
[   60.902120] Bluetooth: RFCOMM TTY layer initialized
[   60.902124] Bluetooth: RFCOMM ver 1.8
[   63.437733] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[   63.437754] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[   63.437793] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[   64.363687] NET: Registered protocol family 10
[   64.364321] lo: Disabled Privacy Extensions
[   64.364804] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   67.356880] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[   74.570663] rausb0: no IPv6 routers present
[   95.289372] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[  113.263935] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[  121.288590] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[  173.219103] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[  177.556790] ppdev0: registered pardevice
[  177.556809] ppdev0: unregistered pardevice
[  178.947701] ppdev0: registered pardevice
[  178.994995] ppdev0: unregistered pardevice
[  182.154456] usb 6-2: new high speed USB device using ehci_hcd and address 3
[  182.292625] usb 6-2: configuration #1 chosen from 1 choice
[  182.405455] scsi3 : SCSI emulation for USB Mass Storage devices
[  182.405663] usb-storage: device found at 3
[  182.405668] usb-storage: waiting for device to settle before scanning
[  182.536968] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1718
[  182.537417] usbcore: registered new interface driver usblp
[  182.537587] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[  187.395976] usb-storage: device scan complete
[  187.397096] scsi 3:0:0:0: Direct-Access     Canon    MP600Storage     0106 PQ: 0 ANSI: 2
[  187.401252] sd 3:0:0:0: [sdg] Attached SCSI removable disk
[  187.401332] sd 3:0:0:0: Attached scsi generic sg8 type 0
[  198.773423] usb 6-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[  198.786166] ppdev0: registered pardevice
[  198.786323] ppdev0: unregistered pardevice
[  199.128541] ppdev0: registered pardevice
[  199.174423] ppdev0: unregistered pardevice
[  199.179874] usb 6-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[  199.192507] usb 6-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[  201.123648] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[  223.164434] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[  305.016629] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[  506.719253] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[  554.652228] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[  580.598732] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[  592.581758] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[  608.583122] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[  626.561742] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[  632.545231] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[  640.565907] usb 6-3: reset high speed USB device using ehci_hcd and address 2
[  640.698683] usb 6-3: can't restore configuration #1 (error=-71)
[  640.698731] usb 6-3: USB disconnect, address 2
[  640.700633] sd 2:0:0:2: [sde] READ CAPACITY failed
[  640.700647] sd 2:0:0:2: [sde] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
[  640.700663] sd 2:0:0:2: [sde] Sense not available.
[  640.706975] scsi 2:0:0:3: [sdf] READ CAPACITY failed
[  640.706992] scsi 2:0:0:3: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[  640.707005] scsi 2:0:0:3: [sdf] Sense not available.
[  640.707049] scsi 2:0:0:3: rejecting I/O to dead device
[  640.707069] scsi 2:0:0:3: [sdf] Write Protect is off
[  640.707077] scsi 2:0:0:3: [sdf] Mode Sense: 00 00 00 00
[  640.707086] scsi 2:0:0:3: [sdf] Assuming drive cache: write through
[  640.707105] scsi 2:0:0:3: rejecting I/O to dead device
[  640.707146] scsi 2:0:0:3: rejecting I/O to dead device
[  640.707158] scsi 2:0:0:3: rejecting I/O to dead device
[  640.707169] scsi 2:0:0:3: rejecting I/O to dead device
[  640.707185] scsi 2:0:0:3: rejecting I/O to dead device
[  640.707194] scsi 2:0:0:3: [sdf] READ CAPACITY failed
[  640.707198] scsi 2:0:0:3: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[  640.707208] scsi 2:0:0:3: [sdf] Sense not available.
[  640.707220] scsi 2:0:0:3: rejecting I/O to dead device
[  640.707231] scsi 2:0:0:3: [sdf] Write Protect is off
[  640.707235] scsi 2:0:0:3: [sdf] Mode Sense: 00 00 00 00
[  640.707241] scsi 2:0:0:3: [sdf] Assuming drive cache: write through
[  640.707297] scsi 2:0:0:3: rejecting I/O to dead device
[  640.707726] scsi 2:0:0:2: [sde] Write Protect is off
[  640.707733] scsi 2:0:0:2: [sde] Mode Sense: 00 00 00 00
[  640.707740] scsi 2:0:0:2: [sde] Assuming drive cache: write through
[  640.707756] scsi 2:0:0:2: rejecting I/O to dead device
[  640.707782] scsi 2:0:0:2: rejecting I/O to dead device
[  640.707799] scsi 2:0:0:2: rejecting I/O to dead device
[  640.707815] scsi 2:0:0:2: rejecting I/O to dead device
[  640.707830] scsi 2:0:0:2: rejecting I/O to dead device
[  640.707840] scsi 2:0:0:2: [sde] READ CAPACITY failed
[  640.707848] scsi 2:0:0:2: [sde] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
[  640.707858] scsi 2:0:0:2: [sde] Sense not available.
[  640.707869] scsi 2:0:0:2: rejecting I/O to dead device
[  640.707882] scsi 2:0:0:2: [sde] Write Protect is off
[  640.707889] scsi 2:0:0:2: [sde] Mode Sense: 00 00 00 00
[  640.707897] scsi 2:0:0:2: [sde] Assuming drive cache: write through
[  640.707941] scsi 2:0:0:2: rejecting I/O to dead device
[  640.813548] usb 6-3: new high speed USB device using ehci_hcd and address 4
[  640.948296] usb 6-3: configuration #1 chosen from 1 choice
[  640.948659] scsi4 : SCSI emulation for USB Mass Storage devices
[  640.948858] usb-storage: device found at 4
[  640.948863] usb-storage: waiting for device to settle before scanning
[  645.938440] usb-storage: device scan complete
[  645.940121] scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[  645.942324] scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[  645.943578] scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[  645.944338] scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[  645.947811] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[  645.947895] sd 4:0:0:0: Attached scsi generic sg4 type 0
[  645.949629] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[  645.949703] sd 4:0:0:1: Attached scsi generic sg5 type 0
[  645.951461] sd 4:0:0:2: [sde] Attached SCSI removable disk
[  645.951534] sd 4:0:0:2: Attached scsi generic sg6 type 0
[  645.953279] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[  645.953358] sd 4:0:0:3: Attached scsi generic sg7 type 0
[  893.379215] usb 6-2: USB disconnect, address 3
[  893.380365] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: removed
[  903.949243] usb 6-2: new high speed USB device using ehci_hcd and address 5
[  904.084878] usb 6-2: configuration #1 chosen from 1 choice
[  904.128228] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1718
[  904.128391] scsi5 : SCSI emulation for USB Mass Storage devices
[  904.128588] usb-storage: device found at 5
[  904.128592] usb-storage: waiting for device to settle before scanning
[  909.119182] usb-storage: device scan complete
[  909.120519] scsi 5:0:0:0: Direct-Access     Canon    MP600Storage     0106 PQ: 0 ANSI: 2
[  909.124918] sd 5:0:0:0: [sdg] Attached SCSI removable disk
[  909.125004] sd 5:0:0:0: Attached scsi generic sg8 type 0
[ 1134.480043] usb 6-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[ 1134.499915] ppdev0: registered pardevice
[ 1134.499934] ppdev0: unregistered pardevice
[ 1134.946631] ppdev0: registered pardevice
[ 1134.999151] ppdev0: unregistered pardevice
[ 1135.013404] usb 6-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[ 1135.034823] usb 6-2: usbfs: interface 1 claimed by usblp while 'xsane' sets config #1
[ 1208.450381] usb 6-3: reset high speed USB device using ehci_hcd and address 4
[ 1561.828702] usb 6-2: usbfs: interface 1 claimed by usblp while 'xscanimage' sets config #1
[ 1561.843931] ppdev0: registered pardevice
[ 1561.844301] ppdev0: unregistered pardevice
[ 1562.289812] ppdev0: registered pardevice
[ 1562.337801] ppdev0: unregistered pardevice

da's nog al een lange...

Offline marks

  • Lid
  • Steunpunt: Nee
draadloos internet valt soms uit...
« Reactie #11 Gepost op: 2007/12/01, 11:17:57 »
lspci:

00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5500] (rev a1)
02:03.0 USB Controller: NEC Corporation USB (rev 41)
02:03.1 USB Controller: NEC Corporation USB (rev 41)
02:03.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
02:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

Offline avanca

  • Lid
  • Steunpunt: Nee
draadloos internet valt soms uit...
« Reactie #12 Gepost op: 2007/12/01, 18:46:05 »
Ik zit ook met het probleem van onregelmatig uitvallen van de draadloze verbinding.
Het is een Belkin router en HP pavilion pc met ingebouwde usb wireless adaptor.
Met windows Vista is er geen enkel probleem.
Ik denk dat de driver ndiwrapper is die gebruikt wordt.
Ik kijk ook uit naar een mogelijke oplossing.
Mvg

Offline Scormen

  • Lid
    • LinuxOntdekt.Be
  • Steunpunt: Nee
draadloos internet valt soms uit...
« Reactie #13 Gepost op: 2007/12/02, 10:31:19 »
Marks, je hebt deze draadloze kaart: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
Op de ubuntuforums vond ik deze post: http://ubuntuforums.org/showthread.php?t=607953&page=2

Avanca, heb jij geen last van dit: https://bugs.launchpad.net/ubuntu/+source/linux-ubuntu-modules-2.6.22/+bug/144621
Ubuntu gebruiker #18341 | Linux gebruiker #456955
· Mijn persoonlijke Linux blog

Offline marks

  • Lid
  • Steunpunt: Nee
draadloos internet valt soms uit...
« Reactie #14 Gepost op: 2007/12/02, 12:43:06 »
Als ik mij niet vergis staat hier toch een D-link DWL-G122 b1 en dat is mijn usb-netwerk-ontvanger en dat is toch geen realtek? Gebruik ik de verkeerde driver of is de realtek de usb poort?

Trouwens nadat de d-link uitvalt werkt afsluiten ook niet meer. Er staat dan iets van failed en vervolgens hangt ie...

In ieder geval alvast bedankt.

Offline avanca

  • Lid
  • Steunpunt: Nee
draadloos internet valt soms uit...
« Reactie #15 Gepost op: 2007/12/03, 13:43:58 »
Bedankt scormen!!!
Na het doornemen van de link die je me aangaf en het toepassen is mijn probleem opgelost en valt de draadloze verbinding niet meer uit.

Mvg
Avanca

Offline marks

  • Lid
  • Steunpunt: Nee
draadloos internet valt soms uit...
« Reactie #16 Gepost op: 2007/12/08, 10:46:10 »
Nog steeds geen oplossing;

en nog steeds valt de draadloze ontvanger zo nu en dan uit...

help!?