Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Pagina's: [1]   Omlaag

Auteur Topic: Xorg vragen  (gelezen 1149 keer)

lordwodan

  • Gast
Xorg vragen
« Gepost op: 2007/07/26, 14:25:15 »
Hoi,

(voor diegene die denken dat ik wel erg veel vraag over Xorg, ik heb meerdere systemen staan om er wat van te leren :-) )

De pc waar het me nu omgaat is mijn fileserver en draait voornamelijk zonder X-server. De xserver is dan ook later geinstalleerd met (dacht ik)

Code: [Selecteer]
apt-get install xserver-xorgDaarna ingesteld met dpkg-reconfigure

Toch een aantal vragen.

Bij het afsluiten van mijn desktop krijg ik maar 1 optie: end session. Dus geen afsluiten, herstarten etc. Hoe kan dit?

Ook staan er wat fouten in het logbestand van Xserver(let op is een hele lap). Mijn vraag is hoe dit kan? ik heb de gewone procedure gevolgd, ben ik wat vergeten?

Code: [Selecteer]
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux Butler 2.6.18-4-686 #1 SMP Wed May 9 23:03:12 UTC 2007 i686
Build Date: 04 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 26 13:55:55 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generieke beeldscherm"
(**) |   |-->Device "S3Virge"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/X11R6/lib/X11/fonts/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)

.................
................
.................

II) S3VIRGE(0): Not using default mode "640x350" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "320x175" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "640x400" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "320x200" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "720x400" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "360x200" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "640x480" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "320x240" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "400x300" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "1024x768" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "512x384" (vrefresh out of range)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "512x384" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1152x864" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "576x432" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x480" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1152x864" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "576x432" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "700x525" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "700x525" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "700x525" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "700x525" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "800x512" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1680x1050" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "840x525" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1440x900" (width too large for virtual size)
(II) S3VIRGE(0): Not using default mode "1280x960" (width too large for virtual size)
(II) S3VIRGE(0): Not using default mode "1280x800" (width too large for virtual size)
(II) S3VIRGE(0): Not using default mode "1280x768" (width too large for virtual size)
(II) S3VIRGE(0): Not using default mode "1152x768" (width too large for virtual size)

..........................
.........................
.........................

FreeFontPath: FPE "/usr/share/fonts/X11/misc" refcount is 2, should be 1; fixing.Ik heb het document enigszins ingekort.

Hij probeert veel moda, waarom? en waar komen die foutmeldingen vandaan?

Voor de zekerheid de xorg.conf:

Code: [Selecteer]
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection

Section "Device"
Identifier "S3Virge"
Driver "s3virge"
BusID "PCI:0:8:0"
EndSection

Section "Monitor"
Identifier "Generieke beeldscherm"
Option "DPMS"
HorizSync 28-60
VertRefresh 43-75
EndSection

Section "Screen"
Identifier "Default Screen"
Device "S3Virge"
Monitor "Generieke beeldscherm"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection
Meld dit bericht aan de moderator   Gelogd

Offline siegi

  • Lid
  • Steunpunt: Nee
Xorg vragen
« Reactie #1 Gepost op: 2007/07/26, 14:47:54 »
Citaat van: lordwodan
Bij het afsluiten van mijn desktop krijg ik maar 1 optie: end session. Dus geen afsluiten, herstarten etc. Hoe kan dit?

Ook staan er wat fouten in het logbestand van Xserver(let op is een hele lap). Mijn vraag is hoe dit kan? ik heb de gewone procedure gevolgd, ben ik wat vergeten?
Op je eerste vraag, normaal moet gdm voor gnome en kdm voor kde draaien om die opties te hebben van afsluiten etc. Draai je zoiets?

Voor de tweede vraag bij een standaard installatie zie je ook error in het log bestand.  De belangrijkste stelling is als ze niets kwaad doen moet je er ook niets aan doen.
Meld dit bericht aan de moderator   Gelogd

lordwodan

  • Gast
Xorg vragen
« Reactie #2 Gepost op: 2007/07/26, 14:56:14 »
Dat is een goede, nee, ik heb geen kdm draaien. Mis ik daar dan echt iets aan? (behalve deze opties?).

Tja en die foutmeldingen.. die zijn er toch niet voor niets? of kan ik ze gewoon negeren?
Meld dit bericht aan de moderator   Gelogd

Offline siegi

  • Lid
  • Steunpunt: Nee
Xorg vragen
« Reactie #3 Gepost op: 2007/07/26, 15:00:29 »
Om die shutdown te laten werken moet er gewoon een display manager draaien als gdm en kdm.

Foutmeldingen if it works.. (op zich klaagt hij alleen dat hij een paar font mappen niet kan vinden die wel aangegeven staan in je xorg conf.)
Meld dit bericht aan de moderator   Gelogd

Offline jan11000

  • Lid
  • Steunpunt: Nee
Xorg vragen
« Reactie #4 Gepost op: 2007/08/04, 16:59:08 »
xresprobe installeer deze en vul de monitor specificaties in.(dus eerst opzoeken)

Dan  sudo dpkg-reconfigure xserver-xorg
Meld dit bericht aan de moderator   Gelogd

Offline Pjotr

  • Lid
    • http://sites.google.com/site/computertip
  • Steunpunt: Nee
Xorg vragen
« Reactie #5 Gepost op: 2007/08/04, 21:50:41 »
Citaat van: jan11000
xresprobe installeer deze en vul de monitor specificaties in.(dus eerst opzoeken)

Dan  sudo dpkg-reconfigure xserver-xorg
Kleine aanvulling: na installatie xresprobe, doe in terminal: sudo ddcprobe
Meld dit bericht aan de moderator   Gelogd
Pagina's: [1]   Omhoog