Deze gevonden via google misschien heb je er iets aan.
John.
Thank you for your help. That patch has got me further along on my quest.
Now when I try the "scanimage -L" command , I get the device to respond back.
But when I try to run the xsane it still says it cannot find the device. Any
further input would be appreciated.
Steve Cooper
John Craig wrote:
> Hi,
>
> I have been using an Acer scanner with the Snapscan driver. You will need
> to patch the Sane source code with the snapscan drivers found at
>
http://download.sourceforge.net/snapscan/snapscan-01112000.tar.gz> I know this works with sane-1.0.3 (which should have come with RH 7.0).
> Furthermore, you might need to look at the snapscan.h file in the
> sane-1.0.3/backends directory to make sure your scanner is being recognized
> as the right type. Do cat /proc/scsi/scsi and look at the way the scanner
> type is reported, then look at line 102 in snapscan.h and make sure it is
> being recognized as an Acer 300f. If so, compile and install.
>
> Good luck!
> je kan hier je licht ook eens opsteken misschien krijg je hem zo aan de praat
veel succes
http://www.sane-project.org/old-archive/2001-01/0327.htmlgreets Chris
