Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Ubuntu herkent harde schijf niet.  (gelezen 7448 keer)

onnozeleneele

  • Gast
Ubuntu herkent harde schijf niet.
« Gepost op: 2007/05/17, 18:57:26 »
Hallo iedereen.

Ik heb een nieuwe pc gekocht en wil er nu ubuntu op instaleren, maar helaas herkent hij de harde schijf niet :o

Als ik opstart van de live cd lijkt alles te lukken totdat ik het systeem wil instaleren.
De partitioner geeft me dan alleen de manual optie en er staat geen enkel partitie of schijf bekend.
Als ik bij gparted kijk dan zie ik alleen de boodschap no devices detected.

Ik heb al eerder ubuntu op pc's geinstaleerd en tot nu toe nog nooit (zo een groot) probleem tegengekomen.

Ik heb al geprobeerd met zowel de 32-bit als de 64-bit versie van ubuntu en beide hebben het zelfde probleem.

Verder heb ik ook al geprobeerd met volgende boot parameters te booten: irqpoll pci = noapci, noapic, nolapic en acpi=off.

Iemand die mij kan helpen?

Alvast bedankt!!!


Enkele specificaties van mijn pc.

Moederbord specificaties:
Model: MS7318
Socket:  LGA775        
Northbridge:  VIA PT890        
Southbridge:  VT8235A3          
FSB:  1066 MHz                  
Aantal geheugenbanken:  2 stuks        
Geheugen type:  DDR2 533Mhz - max. 1 Gb per bank        
Geheugen configuratie:  Single Channel        
Revisie:  1        
Form Factor:  MICRO-BTX        
Aantal PCI sloten:  2 stuks        
Aantal PCI-e 16* sloten:  1 stuks        
Aantal PCI-e Sloten:  1 stuks          
Netwerk chipset:  VIA Rhine II Fast Ethernet  

Merk en type harde schijf: Seagate Barracuda ST3320820AS

onnozeleneele

  • Gast
Ubuntu herkent harde schijf niet.
« Reactie #1 Gepost op: 2007/05/17, 18:59:11 »
Nog enkele log files die mss handig kunnen zijn voor de experts onder ons:

output dmesg


ubuntu@ubuntu:~$ dmesg
[    0.000000] Linux version 2.6.20-15-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[    0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[    0.000000]  BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP (v000 MEDION                                ) @ 0x00000000000f7fc0
[    0.000000] ACPI: RSDT (v001 MEDION MEDIONAG 0x42302e31 AWRD 0x00000000) @ 0x000000003fee3040
[    0.000000 ] ACPI: FADT (v001 MEDION MEDIONAG 0x42302e31 AWRD 0x00000000) @ 0x000000003fee30c0
[    0.000000] ACPI: BOOT (v001 MEDION MEDIONAG 0x42302e31 AWRD 0x00000000) @ 0x000000003fee9280
[    0.000000] ACPI: SLIC (v001 MEDION MEDIONAG 0x42302e31 AWRD 0x00000000) @ 0x000000003fee9400
[    0.000000] ACPI: MCFG (v001 MEDION MEDIONAG 0x42302e31 AWRD 0x00000000) @ 0x000000003fee95c0
[    0.000000] ACPI: MADT (v001 MEDION MEDIONAG 0x42302e31 AWRD 0x00000000) @ 0x000000003fee9300
[    0.000000] ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20041203) @ 0x000000003fee9640
[    0.000000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20040311) @ 0x000000003fee9ad0
[    0.000000] ACPI: DSDT (v001 MEDION AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000003fee0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-000000003fee0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   261856
[    0.000000] On node 0 totalpages: 261759
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1100 pages reserved
[    0.000000]   DMA zone: 2843 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3524 pages used for memmap
[    0.000000]   DMA32 zone: 254236 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000 ] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 5, address 0xfecc0000, GSI 24-47
[    0.000000 ] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to physical flat
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[    0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000
[    0.000000] Nosave address range: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PERCPU: Allocating 34048 bytes of per cpu data
[    0.000000] Built 1 zonelists.  Total pages: 257079
[    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[   23.530656] Console: colour VGA+ 80x25
[   23.531923] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   23.532628] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[   23.532702] Checking aperture...
[   23.532715] Calgary: detecting Calgary via BIOS EBDA area
[   23.532716] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[   23.555513] Memory: 1019348k/1047424k available (2217k kernel code, 27688k reserved, 1162k data, 304k init)
[   23.635181] Calibrating delay using timer specific routine.. 4258.82 BogoMIPS (lpj=8517659)
[   23.635244 ] Security Framework v1.0.0 initialized
[   23.635254] SELinux:  Disabled at boot.
[   23.635282] Mount-cache hash table entries: 256
[   23.635470] CPU: L1 I cache: 32K, L1 D cache: 32K
[   23.635472] CPU: L2 cache: 2048K
[   23.635475] CPU 0/0 -> Node 0
[   23.635477] using mwait in idle threads.
[   23.635478] CPU: Physical Processor ID: 0
[   23.635479] CPU: Processor Core ID: 0
[   23.635488] CPU0: Thermal monitoring enabled (TM2)
[   23.635502] SMP alternatives: switching to UP code
[   23.635898] Early unpacking initramfs... done
[   23.957734] ACPI: Core revision 20060707
[   23.961839] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   24.006040] Using local APIC timer interrupts.
[   24.053015] result 16625419
[   24.053017] Detected 16.625 MHz APIC timer.
[   24.055208] SMP alternatives: switching to SMP code
[   24.055415] Booting processor 1/2 APIC 0x1
[   24.066229] Initializing CPU#1
[   24.142991] Calibrating delay using timer specific routine.. 4256.32 BogoMIPS (lpj=8512640)
[   24.142997] CPU: L1 I cache: 32K, L1 D cache: 32K
[   24.142999] CPU: L2 cache: 2048K
[   24.143001] CPU 1/1 -> Node 0
[   24.143003] CPU: Physical Processor ID: 0
[   24.143004] CPU: Processor Core ID: 1
[   24.143009] CPU1: Thermal monitoring enabled (TM2)
[   24.143285] Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 02
[   24.147002] CPU 1: Syncing TSC to CPU 0.
[   24.147102] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 536 cycles)
[   24.147122] Brought up 2 CPUs
[   24.147182] Disabling vsyscall due to use of PM timer
[   24.147184] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
[   24.147186] time.c: Detected 2128.054 MHz processor.
[   24.186899] migration_cost=52
[   24.187238] Time: 17:04:35  Date: 04/17/107
[   24.187268] NET: Registered protocol family 16
[   24.187337] ACPI: bus type pci registered
[   24.187345] PCI: Using configuration type 1
[   24.187347] mtrr: your CPUs had inconsistent fixed MTRR settings
[   24.187349] mtrr: probably your BIOS does not setup all CPUs.
[   24.187350] mtrr: corrected configuration.
[   24.197831] ACPI: Interpreter enabled
[   24.197833] ACPI: Using IOAPIC for interrupt routing
[   24.198500 ] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   24.198504] PCI: Probing PCI hardware (bus 00)
[   24.199993] Boot video device is 0000:02:00.0
[   24.200654] PCI: Transparent bridge - 0000:00:13.1
[   24.200716] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   24.273656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
[   24.274243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[   24.274925] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
[   24.275278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE.PE5C._PRT]
[   24.275861] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE.PE6C._PRT]
[   24.276582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
[   24.277051] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[   24.277402] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[   24.277756] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[   24.278111] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
[   24.278432] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   24.278745] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   24.279061] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   24.279384] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *5
[   24.281907] Linux Plug and Play Support v0.97 (c) Adam Belay
[   24.281919] pnp: PnP ACPI init
[   24.287101] pnp: PnP ACPI: found 17 devices
[   24.287153] PCI: Using ACPI for IRQ routing
[   24.287155] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   24.287280] NET: Registered protocol family 8
[   24.287281] NET: Registered protocol family 20
[   24.287306] PCI-GART: No AMD northbridge found.
[   24.287805] pnp: 00:01: ioport range 0x400-0x47f could not be reserved
[   24.287807] pnp: 00:01: ioport range 0x500-0x50f has been reserved
[   24.288093] PCI: Bridge: 0000:00:01.0
[   24.288096]   IO window: b000-bfff
[   24.288100]   MEM window: dfd00000-dfdfffff
[   24.288104 ]   PREFETCH window: dfc00000-dfcfffff
[   24.288111] PCI: Bridge: 0000:00:02.0
[   24.288113]   IO window: a000-afff
[   24.288118]   MEM window: dc000000-deffffff
[   24.288122]   PREFETCH window: c0000000-cfffffff
[   24.288126] PCI: Bridge: 0000:00:03.0
[   24.288129]   IO window: c000-cfff
[   24.288134]   MEM window: dfb00000-dfbfffff
[   24.288138]   PREFETCH window: dfe00000-dfefffff
[   24.288144] PCI: Bridge: 0000:04: 00.0
[   24.288146]   IO window: 9000-9fff
[   24.288151]   MEM window: df800000-df8fffff
[   24.288155]   PREFETCH window: df700000-df7fffff
[   24.288159] PCI: Bridge: 0000:04:00.1
[   24.288161]   IO window: 8000-8fff
[   24.288166]   MEM window: df900000-df9fffff
[   24.288170]   PREFETCH window: df600000-df6fffff
[   24.288174] PCI: Bridge: 0000:00:13.0
[   24.288176]   IO window: 8000-9fff
[   24.288181]   MEM window: df800000-dfafffff
[   24.288185]   PREFETCH window: df600000-df7fffff
[   24.288189] PCI: Bridge: 0000:00:13.1
[   24.288192]   IO window: 7000-7fff
[   24.288196]   MEM window: df500000-df5fffff
[   24.288200]   PREFETCH window: df400000-df4fffff
[   24.288217] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   24.288233] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
[   24.288238] PCI: Setting latency timer of device 0000:00: 02.0 to 64
[   24.288253] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
[   24.288258] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   24.288266] PCI: Setting latency timer of device 0000:00: 13.0 to 64
[   24.288280] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 20 (level, low) -> IRQ 20
[   24.288284] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   24.288297] ACPI: PCI Interrupt 0000:04: 00.1[C] -> GSI 22 (level, low) -> IRQ 22
[   24.288302] PCI: Setting latency timer of device 0000:04:00.1 to 64
[   24.288309] PCI: Setting latency timer of device 0000:00:13.1 to 64
[   24.288347] NET: Registered protocol family 2
[   24.331221] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[   24.331360] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[   24.332876] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   24.334795] TCP: Hash tables configured (established 131072 bind 65536)
[   24.334798] TCP reno registered
[   24.343442] checking if image is initramfs... it is
[   24.967451] Freeing initrd memory: 7265k freed
[   24.971637] Simple Boot Flag at 0x34 set to 0x80
[   24.972200] audit: initializing netlink socket (disabled)
[   24.972222] audit(1179421475.400:1): initialized
[   24.972413] VFS: Disk quotas dquot_6.5.1
[   24.972435] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   24.972495] io scheduler noop registered
[   24.972497] io scheduler anticipatory registered
[   24.972499] io scheduler deadline registered
[   24.972510] io scheduler cfq registered (default)
[   24.972835] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   24.972876] assign_interrupt_mode Found MSI capability
[   24.972880] Allocate Port Service[0000:00: 02.0:pcie00]
[   24.972908] Allocate Port Service[0000:00:02.0:pcie02]
[   24.973014] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   24.973063] assign_interrupt_mode Found MSI capability
[   24.973065 ] Allocate Port Service[0000:00:03.0:pcie00]
[   24.973093] Allocate Port Service[0000:00:03.0:pcie02]
[   24.973212] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   24.973253] assign_interrupt_mode Found MSI capability
[   24.973255] Allocate Port Service[0000:04:00.0:pcie00]
[   24.973353] PCI: Setting latency timer of device 0000:04:00.1 to 64
[   24.973393] assign_interrupt_mode Found MSI capability
[   24.973395] Allocate Port Service[0000:04: 00.1:pcie00]
[   24.992619] Real Time Clock Driver v1.12ac
[   24.992684] Linux agpgart interface v0.102 (c) Dave Jones
[   24.992686] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   24.992806] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   24.992918] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   24.993410] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   24.993570] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   24.993746] mice: PS/2 mouse device common for all mice
[   24.994280] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   24.994499] input: Macintosh mouse button emulation as /class/input/input0
[   24.994529] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   24.994533] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   24.994812] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   24.994814] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   24.997498] serio: i8042 KBD port at 0x60,0x64 irq 1
[   24.997501] serio: i8042 AUX port at 0x60,0x64 irq 12
[   24.997620] TCP cubic registered
[   24.997630] NET: Registered protocol family 1
[   24.997739] ACPI: (supports S0 S3 S4 S5)
[   24.997783]   Magic number: 7:586:87
[   24.997952] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   24.998046] Freeing unused kernel memory: 304k freed
[   25.020907] input: AT Translated Set 2 keyboard as /class/input/input1
[   26.137356] Capability LSM initialized
[   26.166927] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[   26.166976] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[   26.166981] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[   26.480781] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[   26.480811] VP_IDE: chipset revision 7
[   26.480813] VP_IDE: not 100% native mode: will probe irqs later
[   26.480824] VP_IDE: VIA vt8251 (rev 00) IDE UDMA133 controller on pci0000:00: 0f.1
[   26.480832]     ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA
[   26.480840] Probing IDE interface ide0...
[   26.492062] SCSI subsystem initialized
[   26.495880] libata version 2.20 loaded.
[   26.528537] usbcore: registered new interface driver usbfs
[   26.528565] usbcore: registered new interface driver hub
[   26.528589] usbcore: registered new device driver usb
[   26.547234] USB Universal Host Controller Interface driver v3.0
[   26.550711] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[   26.559536] ieee1394: Initialized config rom entry `ip1394'
[   26.590504] Floppy drive(s): fd0 is 1.44M
[   26.611858 ] FDC 0 is a post-1991 82077
[   27.349724] hda: HL-DT-ST DVDRAM GSA-H42L, ATAPI CD/DVD-ROM drive
[   28.131703] hdb: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive
[   28.193879] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   28.201568] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20
[   28.201588] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   28.201753] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[   28.201777] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e400
[   28.201883] usb usb1: configuration #1 chosen from 1 choice
[   28.201906] hub 1-0:1.0: USB hub found
[   28.201911] hub 1-0:1.0: 2 ports detected
[   28.210930] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
[   28.210939] Uniform CD-ROM driver Revision: 3.20
[   28.223296] hdb: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
[   28.305676] ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 22
[   28.305694] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   28.305723] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[   28.305753] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e000
[   28.305845] usb usb2: configuration #1 chosen from 1 choice
[   28.305868] hub 2-0:1.0: USB hub found
[   28.305874] hub 2-0:1.0: 2 ports detected
[   28.409968] ACPI: PCI Interrupt 0000:00:10.2 -> GSI 21 (level, low) -> IRQ 21
[   28.409978] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   28.410007] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[   28.410031] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
[   28.410122] usb usb3: configuration #1 chosen from 1 choice
[   28.410151] hub 3-0:1.0: USB hub found
[   28.410158] hub 3-0:1.0: 2 ports detected
[   28.515841] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23
[   28.515850] uhci_hcd 0000:00:10.3: UHCI Host Controller
[   28.515868] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[   28.515890] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000d800
[   28.515968] usb usb4: configuration #1 chosen from 1 choice
[   28.515987] hub 4-0:1.0: USB hub found
[   28.515993] hub 4-0:1.0: 2 ports detected
[   28.547109] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   28.620049] ACPI: PCI Interrupt 0000:07:0c.0[A] -> GSI 19 (level, low) -> IRQ 19
[   28.620163] ACPI: PCI Interrupt 0000:00: 12.0[A] -> GSI 23 (level, low) -> IRQ 23
[   28.624142] eth0: VIA Rhine II at 0x1d400, 00:19:db:5d:46:97, IRQ 23.
[   28.624856] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[   28.676142] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[df5fe000-df5fe7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   28.681275] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 22
[   28.681292] ehci_hcd 0000:00:10.4: EHCI Host Controller
[   28.681328] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[   28.681361] ehci_hcd 0000:00:10.4: debug port 1
[   28.681372] ehci_hcd 0000:00: 10.4: irq 22, io mem 0xdfffe000
[   28.681379] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   28.681468] usb usb5: configuration #1 chosen from 1 choice
[   28.681493] hub 5-0:1.0: USB hub found
[   28.681499] hub 5-0:1.0: 8 ports detected
[   28.687618] usb 1-1: device descriptor read/all, error -71
[   29.888914] usb 5-1: new high speed USB device using ehci_hcd and address 2
[   29.957423] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc000111ecd1]
[   30.022255] usb 5-1: configuration #1 chosen from 1 choice
[   30.022315] hub 5-1:1.0: USB hub found
[   30.022465] hub 5-1:1.0: 4 ports detected
[   30.513668] usb 5-1.1: new high speed USB device using ehci_hcd and address 4
[   30.697570] usb 5-1.1: configuration #1 chosen from 1 choice
[   30.900694] usb 5-1.2: new high speed USB device using ehci_hcd and address 5
[   31.171208] usb 5-1.2: configuration #1 chosen from 1 choice
[   31.368449] usb 5-1.3: new low speed USB device using ehci_hcd and address 6
[   31.465632] usb 5-1.3: configuration #1 chosen from 1 choice
[   31.466222] usbcore: registered new interface driver libusual
[   31.468871] Initializing USB Mass Storage driver...
[   31.707266] usb 4-2: new low speed USB device using uhci_hcd and address 2
[   31.888695] usb 4-2: configuration #1 chosen from 1 choice
[   31.891974] scsi0 : SCSI emulation for USB Mass Storage devices
[   31.892017] usb-storage: device found at 4
[   31.892019] usb-storage: waiting for device to settle before scanning
[   31.892035] usbcore: registered new interface driver usb-storage
[   31.892037] USB Mass Storage support registered.
[   31.898520] usbcore: registered new interface driver hiddev
[   31.910832] input: Microsoft Basic Optical Mouse as /class/input/input2
[   31.910954] input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00: 10.3-2
[   31.910964] usbcore: registered new interface driver usbhid
[   31.910966] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   36.892939] usb-storage: device scan complete
[   36.897058] scsi 0:0:0:0: Direct-Access     Generic  Flash HS-CF      4.44 PQ: 0 ANSI: 0
[   36.900297] scsi 0:0:0:1: Direct-Access     Generic  Flash HS-MS/SD   4.44 PQ: 0 ANSI: 0
[   36.903545] scsi 0:0:0:2: Direct-Access     Generic  Flash HS-SM      4.44 PQ: 0 ANSI: 0
[   36.914102 ] sd 0:0:0:0: Attached scsi removable disk sda
[   36.964934] sd 0:0:0:1: Attached scsi removable disk sdb
[   36.969175] sd 0:0:0:2: Attached scsi removable disk sdc
[   36.972397] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   36.972521] sd 0:0:0:1: Attached scsi generic sg1 type 0
[   36.972638] sd 0:0:0:2: Attached scsi generic sg2 type 0
[   39.821717] end_request: I/O error, dev fd0, sector 0
[   52.028098] end_request: I/O error, dev fd0, sector 0
[   52.028102] Buffer I/O error on device fd0, logical block 0
[   64.246203] end_request: I/O error, dev fd0, sector 0
[   64.246206] Buffer I/O error on device fd0, logical block 0
[   77.465019] end_request: I/O error, dev fd0, sector 0
[   89.671675] end_request: I/O error, dev fd0, sector 0
[   89.671679] Buffer I/O error on device fd0, logical block 0
[  101.873711] end_request: I/O error, dev fd0, sector 0
[  101.873715] Buffer I/O error on device fd0, logical block 0
[  102.518288] ISO 9660 Extensions: Microsoft Joliet Level 3
[  102.548531] ISO 9660 Extensions: RRIP_1991A
[  102.591719] Registering unionfs 20060916-2203
[  102.591723] unionfs: debugging is not enabled
[  102.601712] loop: loaded (max 8 devices)
[  102.753333] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[  165.781496] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  166.702634] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[  166.720057] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  167.093233] agpgart: Detected VIA P4M890 chipset
[  167.099327] agpgart: AGP aperture is 128M @ 0xd0000000
[  169.011967] input: PC Speaker as /class/input/input3
[  169.396037] NET: Registered protocol family 17
[  169.775676] Linux video capture interface: v2.00
[  170.585376] parport: PnPBIOS parport detected.
[  170.585429] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[  170.772422] input: X10 WTI RF receiver as /class/input/input4
[  170.772546] usbcore: registered new interface driver ati_remote
[  170.772551] drivers/usb/input/ati_remote.c: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1
[  170.780326] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
[  171.310474] Loading module: rt2x00lib - CVS (N/A) by http://rt2x00.serialmonkey.com .
[  171.316533] saa7130/34: v4l2 driver version 0.2.14 loaded
[  171.316614] ACPI: PCI Interrupt 0000:07:09.0[A] -> GSI 16 (level, low) -> IRQ 16
[  171.316621] saa7133[0]: found at 0000:07:09.0, rev: 209, irq: 16, latency: 32, mmio: 0xdf5ff000
[  171.316627] saa7133[0]: subsystem: 16be:0010, board: UNKNOWN/GENERIC [card=0,autodetected]
[  171.316634] saa7133[0]: board init: gpio is 0
[  171.449449] saa7133[0]: i2c eeprom 00: be 16 10 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[  171.449460] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
[  171.449468] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 2c 02 51 96 2b
[  171.449477] saa7133[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
[  171.449495] saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 22 15 00 fd 79 44 9f c2 8f
[  171.449501] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  171.449507] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  171.449514] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[  171.449758] saa7133[0]: registered device video0 [v4l2]
[  171.449783] saa7133[0]: registered device vbi0
[  171.926943 ] Loading module: rt73usb - CVS (N/A) by http://rt2x00.serialmonkey.com.
[  172.095925] saa7134 ALSA driver for DMA sound loaded
[  172.095954] saa7133[0]/alsa: saa7133[0] at 0xdf5ff000 irq 16 registered as card -2
[  172.235986] usbcore: registered new interface driver rt73usb
[  173.289947] usbcore: registered new interface driver rt2570
[  173.307260] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 17
[  173.307283] PCI: Setting latency timer of device 0000:04:01.0 to 64
[  173.308577] wmaster0: Selected rate control algorithm 'simple'
[  173.515011] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[  175.191471] NET: Registered protocol family 10
[  175.191638] lo: Disabled Privacy Extensions
[  175.438808] fuse init (API version 7.8)
[  182.691330] input: Power Button (FF) as /class/input/input5
[  182.691359] ACPI: Power Button (FF) [PWRF]
[  182.691394] input: Power Button (CM) as /class/input/input6
[  182.691407] ACPI: Power Button (CM) [PWRB]
[  182.691433] input: Sleep Button (CM) as /class/input/input7
[  182.691449] ACPI: Sleep Button (CM) [SLPB]
[  182.746042] No dock devices found.
[  182.759981] Using specific hotkey driver
[  182.805760] ibm_acpi: ec object not found
[  183.024143] pcc_acpi: loading...
[  185.359915] wlan0: no IPv6 routers present
[  186.150000] eth0: no IPv6 routers present
[  191.570268] wlan0: starting scan
[  192.549904] wlan0: scan completed
[  201.226980] lp0: using parport0 (interrupt-driven).
[  201.261413] ppdev: user-space parallel port driver
[  211.926889] eth0: no IPv6 routers present
[  216.663903] Bluetooth: Core ver 2.11
[  216.664001] NET: Registered protocol family 31
[  216.664004] Bluetooth: HCI device and connection manager initialized
[  216.664007] Bluetooth: HCI socket layer initialized
[  216.698405] Bluetooth: L2CAP ver 2.8
[  216.698410] Bluetooth: L2CAP socket layer initialized
[  218.333812] Bluetooth: RFCOMM socket layer initialized
[  218.333831] Bluetooth: RFCOMM TTY layer initialized
[  218.333833] Bluetooth: RFCOMM ver 1.8
[  227.587898] wlan0: starting scan
[  228.583398] wlan0: scan completed
[  229.515396] hda-intel: Invalid position buffer, using LPIB read method instead.
[  248.678186] wlan0: starting scan
[  249.633702] wlan0: scan completed
[  269.661672] wlan0: starting scan
[  270.577186] wlan0: scan completed
[  290.642864] wlan0: starting scan
[  291.598385] wlan0: scan completed
[  311.622332] wlan0: starting scan
[  312.541867] wlan0: scan completed
[  332.603891] wlan0: starting scan
[  333.559414] wlan0: scan completed
[  353.583355] wlan0: starting scan
[  354.534878] wlan0: scan completed




Output lspci


ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.5 PIC: VIA Technologies, Inc. P4M890 I/O APIC Interrupt Controller
00:00.6 Host bridge: VIA Technologies, Inc. P4M890 Security Device
00:00.7 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:02.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
00:03.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
00:0f.0 IDE interface: VIA Technologies, Inc. Unknown device 5287 (rev 20)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 91)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 91)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 91)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 91)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
00:13.0 PCI bridge: VIA Technologies, Inc. VT8251 Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8251 PCI to PCI Bridge
02:00.0 VGA compatible controller: nVidia Corporation Unknown device 0390 (rev a1)
04:00.0 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
04:00.1 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
04:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller
07:09.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
07:0c.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev c0)

Nogmaals bedankt!

Offline Pjotr

  • Lid
    • http://sites.google.com/site/computertip
  • Steunpunt: Nee
Ubuntu herkent harde schijf niet.
« Reactie #2 Gepost op: 2007/05/17, 20:14:02 »
Dit lijkt me een belangrijke boodschap:
hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)

Controleer eens hoe het zit met de master/slave instellingen?
Als volgt:
http://forum.ubuntu-nl.org/message/99943#p99943

onnozeleneele

  • Gast
Ubuntu herkent harde schijf niet.
« Reactie #3 Gepost op: 2007/05/18, 12:02:38 »
Hey,

bedankt voor het antwoord pjotr123.

Helaas denk ik niet dat dat het probleem was.
Ik heb de pc opengevezen en alles lijkt mij normaal.

Harde schijf en dvd drives zitten op verschillende kanalen. en de twee dvd stations zit er 1 op master en 1 op slave.

De harde schijf is wel serial ata en hangt dus alleen aan de SATA1 poort.

Ik heb daar wel precies geen jumper aan gezien zou dat het prob kunnen zijn?

of zou het eerder iets zijn met de drivers voor de sata?  (windows vista werkt wel)

Sugesties iemand?

help is appreciated, want ik zou niet graag opgezadeld zitten met vista voor de rest van de levensloop van deze pc.

alvast bedankt.

Offline woteb

  • Lid
  • Steunpunt: Nee
Ubuntu herkent harde schijf niet.
« Reactie #4 Gepost op: 2007/05/18, 12:24:15 »
In je lijstje zie ik het volgende:

[   36.972397] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   36.972521] sd 0:0:0:1: Attached scsi generic sg1 type 0
[   36.972638] sd 0:0:0:2: Attached scsi generic sg2 type 0

Een SATA schrijf gebruikt dacht ik sda i.p.v. hda.
Zo heb ik een tijdje geleden mijn Compaq Armada E500 image op een Toshiba Satellite gezet, en de hda in /etc/fstab omgezet in sda, een herstart gemaakt met de alternate CD en een gebroken installatie gebruikt, en de schijven als sda gemarkeerd. Daar bij de GRUB een nieuwe GRUB aan laten maken en het werkte ineens.
Laptop, HP 550, Dual Core 1 GB RAM/2 Ghz:: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie) Fluxbox / IceWM / XFCE4 / Openbox / LXDE.
3 Werkstations + 1 laptop: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie Gnome/XFCE/IceWM)
Server: Debian 5.0 Stable (Lenny)

onnozeleneele

  • Gast
Ubuntu herkent harde schijf niet.
« Reactie #5 Gepost op: 2007/05/18, 13:19:55 »
Bedankt woteb,

Dat zou idd kunnen, maar dan zou ik die hard disk (of een of andere device) toch moeten kunnen zien als ik tussen de devices kijk (bij computer). ik zie de verschillend dvd stations, en dan de 3 devices die zo flash kaartjes  lezen, en dan het filesystem van de live-cd.


nog bijkomende info als ik fdisk -l doe dan krijg ik niets terug.

ubuntu@ubuntu:~$ sudo fdisk -l
ubuntu@ubuntu:~$


Dan nog een vraagje, dit is hier precies het registreren van de flash kaartjes lezer, maar is het normaal dat al die I/O errors er bij staan. Komt dat om dat er geen media instaat en is dat de standaard manier?
of is er iets anders aan de knikker.

[   31.910964] usbcore: registered new interface driver usbhid
[   31.910966] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   36.892939] usb-storage: device scan complete
[   36.897058] scsi 0:0:0:0: Direct-Access     Generic  Flash HS-CF      4.44 PQ: 0 ANSI: 0
[   36.900297] scsi 0:0:0:1: Direct-Access     Generic  Flash HS-MS/SD   4.44 PQ: 0 ANSI: 0
[   36.903545] scsi 0:0:0:2: Direct-Access     Generic  Flash HS-SM      4.44 PQ: 0 ANSI: 0
[   36.914102 ] sd 0:0:0:0: Attached scsi removable disk sda
[   36.964934] sd 0:0:0:1: Attached scsi removable disk sdb
[   36.969175] sd 0:0:0:2: Attached scsi removable disk sdc
[   36.972397] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   36.972521] sd 0:0:0:1: Attached scsi generic sg1 type 0
[   36.972638] sd 0:0:0:2: Attached scsi generic sg2 type 0
[   39.821717] end_request: I/O error, dev fd0, sector 0
[   52.028098] end_request: I/O error, dev fd0, sector 0
[   52.028102] Buffer I/O error on device fd0, logical block 0
[   64.246203] end_request: I/O error, dev fd0, sector 0
[   64.246206] Buffer I/O error on device fd0, logical block 0
[   77.465019] end_request: I/O error, dev fd0, sector 0
[   89.671675] end_request: I/O error, dev fd0, sector 0
[   89.671679] Buffer I/O error on device fd0, logical block 0
[  101.873711] end_request: I/O error, dev fd0, sector 0



Zou iemand die ook een sata hard disk heeft waarop linux wel werkt eens zijn dmesg hier kunnen posten zodat ik zou kunnen vergelijken?

Ik denk dat dat me mss vooruit zou kunnen helpen, of toch een idee geven waar ik verder zou moeten zoeken.

Mijn excuses voor de moeilijke vragen, maar weet echt niet goed hoe ik voort moet doen!

Offline woteb

  • Lid
  • Steunpunt: Nee
Ubuntu herkent harde schijf niet.
« Reactie #6 Gepost op: 2007/05/18, 13:27:03 »
Doe eens in een terminal: df -h

Wat zie je dan?
En hoe ziet jouw /etc/fstab er uit?
Laptop, HP 550, Dual Core 1 GB RAM/2 Ghz:: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie) Fluxbox / IceWM / XFCE4 / Openbox / LXDE.
3 Werkstations + 1 laptop: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie Gnome/XFCE/IceWM)
Server: Debian 5.0 Stable (Lenny)

onnozeleneele

  • Gast
Ubuntu herkent harde schijf niet.
« Reactie #7 Gepost op: 2007/05/18, 14:03:09 »
Dit zijn de gevraagde gegevens:

ubuntu@ubuntu:~$ sudo df -h
Filesystem            Size  Used Avail Use% Mounted on
tmpfs                 502M   39M  464M   8% /lib/modules/2.6.20-15-generic/volatile
tmpfs                 502M   39M  464M   8% /lib/modules/2.6.20-15-generic/volatile
varrun                502M  108K  502M   1% /var/run
varlock               502M     0  502M   0% /var/lock
udev                  502M  128K  502M   1% /dev
devshm                502M     0  502M   0% /dev/shm
tmpfs                 502M   12K  502M   1% /tmp



ubuntu@ubuntu:~$ cat /etc/fstab
unionfs / unionfs rw 0 0
tmpfs /tmp tmpfs nosuid,nodev 0 0


Zoals je ziet enkel de live-cd :-(

onnozeleneele

  • Gast
Ubuntu herkent harde schijf niet.
« Reactie #8 Gepost op: 2007/05/19, 19:26:43 »
Ik heb iets nieuws ontdekt.

Als ik mijn sata controler op RAID mode zet dan herkent linux mijn harde schijf wel.

Maar als ik dan probeer op te starten op de windows partitie dan crasht heel het spel. en bij het booten zegt de bios dat er geen raid aanwezig is.

Als ik de sata controler terug op IDE zet dan werkt de windows partitie wel terug.

Mijn vraag is dus: stel nu ik instaleer linux, zou grub dan werken?

Wat denken jullie hiervan?

alvast bedankt voor de input.

Viltstift

  • Gast
Ubuntu herkent harde schijf niet.
« Reactie #9 Gepost op: 2007/06/13, 18:39:31 »
Ik heb zelf ook problemen met mijn ST3320820AS ATA schijf, maar zo te zien hebben jullie ook nog geen goede oplossing gevonden

onnozeleneele

  • Gast
Ubuntu herkent harde schijf niet.
« Reactie #10 Gepost op: 2007/06/16, 11:52:02 »
Haai viltstift

Het werkt zoals ik hierboven heb beschreven.

Het enige lastige is dat als ik wil veranderen van os dat ik in de bios de sata controler van mode moet veranderen.

maar voor de rest geen problemen.

ik heb ergens nog gelezen dat je een driver kon instaleren zodat windows ook overweg kon met de andere modes, maar is me helaas niet gelukt.

hoopt dat het helpt

Offline barth

  • Lid
  • Steunpunt: Nee
Ubuntu herkent harde schijf niet.
« Reactie #11 Gepost op: 2007/06/16, 18:18:40 »
http://www.viaarena.com/default.aspx?PageID=2
 Ik zie Ubuntu in het rijtje staan, mss daar eens rond gaan neuzen. Soms doet een bios-update wonderen...... ;)
 Waarschijnlijk is ook een en ander te vinden op audio drivers gebied.

Viltstift

  • Gast
Ubuntu herkent harde schijf niet.
« Reactie #12 Gepost op: 2007/06/17, 18:34:32 »
Citaat van: onnozeleneele
Haai viltstift

Het werkt zoals ik hierboven heb beschreven.

Het enige lastige is dat als ik wil veranderen van os dat ik in de bios de sata controler van mode moet veranderen.

maar voor de rest geen problemen.

ik heb ergens nog gelezen dat je een driver kon instaleren zodat windows ook overweg kon met de andere modes, maar is me helaas niet gelukt.

hoopt dat het helpt
Ow wat ben ik dom, ik heb je hele bericht niet gezien,
eindelijk het oude vertrouwde ubuntu :)

Offline mcgyver

  • Lid
  • Steunpunt: Nee
Ubuntu herkent harde schijf niet.
« Reactie #13 Gepost op: 2007/07/13, 09:30:46 »
Hoi Viltstift of Onnozeleneele,

Is het jullie ooit gelukt om je pc "normaal" op te starten? bv. na BIOS update?