[NIET OPGELOST] Fritz!box 7360 Router & Mode

[joop905]

Haal deze eens weg brother4
alleen brother3 laten staan

Code: [Selecteer]

gksu leafpad /etc/sane.d/net.conf

[yJi]

Haal deze eens weg brother4
alleen brother3 laten staan

Code: [Selecteer]

gksu leafpad /etc/sane.d/net.conf

Dat hielp ook niet krijg weer hetzelfde plaatje, wat als ik brother 4 helemaal verwijder?
Maar wat mij een beetje bevreemd is dat dit wel om een brother4 all in one is, en dus geen brother3 is.
Werkt dat dan wel...

Ja dat met lsusb heb je gelijk aan over USB, die kan dus ik niet als netwerk aio zien.

[yJi]

Neen, dit werkt dan dus helemaal niet wanneer je Brother4 verwijderd hebt, dat zie Xsane alleen nog maar de
USB HP-Scanner.

Ik ga nu geloven dat De Baas blijkbaar toch gelijk krijgt met zijn aanname. Ligt dat nu aan de Brother, de Fritz.box of aan Xubuntu, ik denk aan het eerste...

[jolo]

Het gaat toch om de MFC-J5910DW. Is het draadloze netwerk daarvan wel correct geconfigureerd? Is deze zichtbaar in de router met voldoende signaalsterkte? Als dat het geval is, dan zou je pas kunnen scannen wanneer deze gevonden wordt door commando

Code: [Selecteer]

scanimage -L [Enter] Met de hoofdletter L dus. De gebruikelijke manier om een draadloze All-in-One printers te installeren in Xubuntu, is via menu > Systeem  > Afdrukbeheer > Toevoegen > Netwerkprinter. Als de Brother drivers correct zijn geïnstalleerd, zou deze vrij snel worden getoond. Zodat je deze kunt selecteren en  > Volgende > Toepassen.   

[joop905]

verwijder brscan3

Code: [Selecteer]

sudo apt-get remove brscan3

instaleer dan deze  brscan4 models
http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/download_scn.html#brscan4

In net.conf haal deze weer weg brother3
en zet er weer brother4 neer

Code: [Selecteer]

gksu leafpad /etc/sane.d/net.conf
Herstart Xubuntu

[yJi]

verwijder brscan3

Code: [Selecteer]

sudo apt-get remove brscan3

instaleer dan deze  brscan4 models
http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/download_scn.html#brscan4

In net.conf haal deze weer weg brother3
en zet er weer brother4 neer

Code: [Selecteer]

gksu leafpad /etc/sane.d/net.conf
Herstart Xubuntu

Heb ik gedaan Joop, hoewel het wordt afgeraden door 't Ubuntu software centrum. Gaat immers om een niet officieel pakket maar om een omgebouwd/aangepast .rpm bestand. (Misschien werkt het wel onder het .rpm...maar ben ik ook nog niet tegengekomen)

Jolo:
Het gaat toch om de MFC-J5910DW. Is het draadloze netwerk daarvan wel correct geconfigureerd? Is deze zichtbaar in de router met voldoende signaalsterkte? Als dat het geval is, dan zou je pas kunnen scannen wanneer deze gevonden wordt door commando.

Heb ik ook gedaan maar ook dan zie ik de scanner ook niet, printen wel weer onder allebei Xubuntu & XP

[yJi]

Jolo, ik heb het nu net zoals jij gezegd hebt toegevoegd ald netwerkprinter, maar de scanner zie ik nog steeds niet, enig idee dan waarom ik de scanner dan niet herkent, of ziet?

scanimage -L geeft alleen de usb-scanner weer...
device `hpaio:/usb/PSC_1400_series?serial=CN617D90P204DZ' is a Hewlett-Packard PSC_1400_series all-in-one

[yJi]

Volgens deze uitkomst in terminal dan zijn dus wel alle daartoe behorende programma's/tools geïnstalleerd:
jana@Joybook-R31:~$ dpkg -l|grep Brother
ii  brother-cups-wrapper-common            1.0.0-10-0ubuntu5                       Common files for Brother cups wrapper packages
ii  brother-udev-rule-type1                1.0.0-1                                 Brother udev rule type 1
ii  brscan-skey                            0.2.4-1                                 Brother Linux scanner S-KEY tool
ii  brscan4                                0.4.1-5                                 Brother Scanner Driver
ii  mfcj5910dwcupswrapper                  3.0.0-1                                 Brother CUPS Inkjet Printer Definitions
ii  mfcj5910dwlpr                          3.0.0-1                                 Brother lpr Inkjet Printer Definitions
ii  printer-driver-ptouch                  1.3-3ubuntu0.1                          printer driver Brother P-touch label printers

Waarom werken ze dan niet allemaal. Heb nu zelfs het geprobeerd als een draadloze AIO printer/scanner.
Als printer doet het alles wat ik wens, maar scannen zit het er volgens mij niet in, of zit er een programma tussen dat misschien tegenwerkt?

Nu mag het wel duidelijk zijn:
jana@Joybook-R31:~$ sudo iwlist scan
[sudo] password for jana:
lo        Interface doesn't support scanning.

wlan0     Interface doesn't support scanning : Network is down

eth0      Interface doesn't support scanning.

Volgens mij blijkt het niet anders te zijn, ook de Fritz.box kan dit ook niet aan en XP weigert het usb-gedeelte te accepteren, behalve de HP PSC 1410, die heb ik er zelfs afgehaald en weer opnieuw geïnstalleerd zonder dat het systeem XP gelijk weer stopt. Iets dat nog wel gebeurt onder XP met alle andere USB-zaken!

[joop905]

het is toch echt een raadsel

[yJi]

het is toch echt een raadsel

Ja Joop, dat is het zeker!

Is er ook zo'n terminal commando om printen weer te geven?

[joop905]

Deze kun je daarvoor gebruiken

Code: [Selecteer]

lpstat -a

deze is ook leuk:

Code: [Selecteer]

hp-check -t

[yJi]

Deze kun je daarvoor gebruiken

Code: [Selecteer]

lpstat -a

deze is ook leuk:

Code: [Selecteer]

hp-check -t

Die hp-check -t geeft wel heel veel informatie, maakt het daardoor ook wat onduidelijk voor mij want daar wordt ook 17 fouten aangegeven...:
jana@Joybook-R31:~$ lpstat -a
Brother-MFC-J5910DW accepting requests since vr 26 jul 2013 21:24:26 CEST
HPPSC1400 accepting requests since vr 26 jul 2013 18:00:28 CEST
MFCJ5910DW accepting requests since vr 26 jul 2013 20:57:09 CEST
PSC-1400-series accepting requests since vr 26 jul 2013 17:44:57 CEST
jana@Joybook-R31:~$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.12.2)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2011-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                   
2. Run-time check mode (-r or --run): Use this mode to determine if a distro   
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                     
3. Both compile- and run-time check mode (-b or --both) (Default): This mode   
will check both of the above cases (both compile- and run-time dependencies).   

Saving output in log file: hp-check.log

Initializing. Please wait...
 
---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux Joybook-R31 3.2.0-49-generic #75-Ubuntu SMP Tue Jun 18 17:40:13 UTC 2013 i686 i686 i386 GNU/Linux

Distribution:
ubuntu 12.04

Checking Python version...
OK, version 2.7.3 installed

Checking PyQt 4.x version...
error: NOT FOUND OR FAILED TO LOAD!

Checking for CUPS...
Status: scheduler is running
warning: Version: (cups-config) Not available. Unable to determine installed version of CUPS.)
warning: /etc/cups/cupsd.conf file not found or not accessible.

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 1.0.0


------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: CUPS image - CUPS image development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: DBus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 3.12.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.12.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.12.2
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0



Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 27-07-13 18:40:40
version = 3.12.2



--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                        Model             
  --------------------------------  ------------------
  hp:/usb/PSC_1400_series?serial=C  HP PSC 1400 series
  N617D90P204DZ                                       

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
Brother-MFC-J5910DW
-------------------
Type: Unknown
Device URI: dnssd://Brother%20MFC-J5910DW._pdl-datastream._tcp.local/
PPD: /etc/cups/ppd/Brother-MFC-J5910DW.ppd
PPD Description: Brother MFC-J5910DW CUPS
Printer status: printer Brother-MFC-J5910DW is idle.  enabled since vr 26 jul 2013 21:24:26 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

HPPSC1400
---------
Type: Unknown
Device URI: http://hostname:631/ipp/
PPD: /etc/cups/ppd/HPPSC1400.ppd
PPD Description: HP PSC 1400 Series, hpcups 3.12.2
Printer status: printer HPPSC1400 is idle.  enabled since vr 26 jul 2013 18:00:28 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

MFCJ5910DW
----------
Type: Unknown
Device URI: dnssd://Brother%20MFC-J5910DW._ipp._tcp.local/
PPD: /etc/cups/ppd/MFCJ5910DW.ppd
PPD Description: Brother MFC-J5910DW CUPS
Printer status: printer MFCJ5910DW is idle.  enabled since vr 26 jul 2013 20:57:09 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

PSC-1400-series
---------------
Type: Printer
Device URI: hp:/usb/PSC_1400_series?serial=CN617D90P204DZ
PPD: /etc/cups/ppd/PSC-1400-series.ppd
PPD Description: HP PSC 1400 Series, hpcups 3.12.2
Printer status: printer PSC-1400-series is idle.  enabled since vr 26 jul 2013 17:44:57 CEST

HP Linux Imaging and Printing System (ver. 3.12.2)
System Tray Status Service ver. 2.0

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

warning: Qt/PyQt 4 initialization failed.
error: hp-systray requires Qt4 GUI and DBus support. Exiting.
warning: Unable to connect to dbus. Is hp-systray running?
Communication status: Good


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
device `hpaio:/usb/PSC_1400_series?serial=CN617D90P204DZ' is a Hewlett-Packard PSC_1400_series all-in-one


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.


 
-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x4d11 at 002:002:
    Device URI: hp:/usb/PSC_1400_series?serial=CN617D90P204DZ

HP Linux Imaging and Printing System (ver. 3.12.2)
System Tray Status Service ver. 2.0

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

warning: Qt/PyQt 4 initialization failed.
error: hp-systray requires Qt4 GUI and DBus support. Exiting.
warning: Unable to connect to dbus. Is hp-systray running?
    Device node: /dev/bus/usb/002/002
    Mode: 0664
getfacl: Voorafgaande '/' in absolute padnamen worden verwijderd
# file: dev/bus/usb/002/002
# owner: root
# group: lp
user::rw-
user:jana:rw-
group::rw-
mask::rw-
other::r--



---------------
| USER GROUPS |
---------------

jana adm disk dialout fax cdrom floppy tape sudo audio dip backup video plugdev fuse scanner lpadmin nopasswdlogin sambashare

error: User needs to be member of group 'lp' to enable print, scan & fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

error: 17 errors and/or warnings.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html


Done.

[joop905]

error: 17 errors and/or warnings. vind ik wel meevallen zelf heb ik er 22

jammer dat die Brother-MFC-J5910DW niet aan had staan
(Printer status: printer Brother-MFC-J5910DW is idle.  enabled since vr 26 jul 2013 21:24:26 CEST)

[yJi]

error: 17 errors and/or warnings. vind ik wel meevallen zelf heb ik er 22

jammer dat die Brother-MFC-J5910DW niet aan had staan
(Printer status: printer Brother-MFC-J5910DW is idle.  enabled since vr 26 jul 2013 21:24:26 CEST)

Dat klopt niet hoor de Brother staat net als de HP allemaal standby, net als nu dus...

Kan een Brother aio ook HPLIP geïnstalleerd zijn...?

Als de brother wel aan staat, dan nog krijg ik weer deze lijn:
MFCJ5910DW
----------
Type: Unknown
Device URI: dnssd://Brother%20MFC-J5910DW._ipp._tcp.local/
PPD: /etc/cups/ppd/MFCJ5910DW.ppd
PPD Description: Brother MFC-J5910DW CUPS
Printer status: printer MFCJ5910DW is idle.  enabled since vr 26 jul 2013 20:57:09 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

[yJi]

Zie jij nog verschil in het onderstaande met de ongeveer zelfde uitdraai in terminal (deze keer slechts 15 fouten). Deze keer printe de mfcj5910dw.

jana@Joybook-R31:~$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.12.2)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2011-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                   
2. Run-time check mode (-r or --run): Use this mode to determine if a distro   
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                     
3. Both compile- and run-time check mode (-b or --both) (Default): This mode   
will check both of the above cases (both compile- and run-time dependencies).   

Saving output in log file: hp-check.log

Initializing. Please wait...
 
---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux Joybook-R31 3.2.0-49-generic #75-Ubuntu SMP Tue Jun 18 17:40:13 UTC 2013 i686 i686 i386 GNU/Linux

Distribution:
ubuntu 12.04

Checking Python version...
OK, version 2.7.3 installed

Checking PyQt 4.x version...
OK, version 4.9.1 installed.

Checking for CUPS...
Status: scheduler is running
warning: Version: (cups-config) Not available. Unable to determine installed version of CUPS.)
warning: /etc/cups/cupsd.conf file not found or not accessible.

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 1.0.0

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: CUPS image - CUPS image development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: DBus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.12.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.12.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.12.2
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no

Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0

Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 29-07-13 23:52:48
version = 3.12.2

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                        Model             
  --------------------------------  ------------------
  hp:/usb/PSC_1400_series?serial=C  HP PSC 1400 series
  N617D90P204DZ                                       

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
 
Brother-MFC-J5910DW
-------------------
Type: Unknown
Device URI: dnssd://Brother%20MFC-J5910DW._pdl-datastream._tcp.local/
PPD: /etc/cups/ppd/Brother-MFC-J5910DW.ppd
PPD Description: Brother MFC-J5910DW CUPS
Printer status: printer Brother-MFC-J5910DW is idle.  enabled since ma 29 jul 2013 23:51Ready to print.
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

HPPSC1400
---------
Type: Unknown
Device URI: http://hostname:631/ipp/
PPD: /etc/cups/ppd/HPPSC1400.ppd
PPD Description: HP PSC 1400 Series, hpcups 3.12.2
Printer status: printer HPPSC1400 is idle.  enabled since vr 26 jul 2013 18:00:28 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

MFCJ5910DW
----------
Type: Unknown
Device URI: dnssd://Brother%20MFC-J5910DW._ipp._tcp.local/
PPD: /etc/cups/ppd/MFCJ5910DW.ppd
PPD Description: Brother MFC-J5910DW CUPS
Printer status: printer MFCJ5910DW is idle.  enabled since vr 26 jul 2013 20:57:09 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

PSC-1400-series
---------------
Type: Printer
Device URI: hp:/usb/PSC_1400_series?serial=CN617D90P204DZ
PPD: /etc/cups/ppd/PSC-1400-series.ppd
PPD Description: HP PSC 1400 Series, hpcups 3.12.2
Printer status: printer PSC-1400-series is idle.  enabled since vr 26 jul 2013 17:44:57 CEST

HP Linux Imaging and Printing System (ver. 3.12.2)
System Tray Status Service ver. 2.0

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

/usr/lib/python2.7/dist-packages/gtk-2.0/gtk/__init__.py:127: RuntimeWarning: PyOS_InputHook is not available for interactive use of PyGTK
  set_interactive(1)
Communication status: Good

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
device `hpaio:/usb/PSC_1400_series?serial=CN617D90P204DZ' is a Hewlett-Packard PSC_1400_series all-in-one

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.
 
-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x4d11 at 002:002:
    Device URI: hp:/usb/PSC_1400_series?serial=CN617D90P204DZ
    Device node: /dev/bus/usb/002/002
    Mode: 0664
getfacl: Voorafgaande '/' in absolute padnamen worden verwijderd
# file: dev/bus/usb/002/002
# owner: root
# group: lp
user::rw-
user:jana:rw-
group::rw-
mask::rw-
other::r--

---------------
| USER GROUPS |
---------------

jana adm disk dialout fax cdrom floppy tape sudo audio dip backup video plugdev fuse scanner lpadmin nopasswdlogin sambashare

error: User needs to be member of group 'lp' to enable print, scan & fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

error: 15 errors and/or warnings.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Done.
jana@Joybook-R31:~$

[joop905]

Wat ik raar vindt is dat alles er dubbel in staat
Brother-MFC-J5910DW
HPPSC1400
MFCJ5910DW
PSC-1400-series

en dat er geen IP adres is (Device URI:)

[yJi]

Wat ik raar vindt is dat alles er dubbel in staat
Brother-MFC-J5910DW
HPPSC1400
MFCJ5910DW
PSC-1400-series

en dat er geen IP adres is (Device URI:)

Dat is op zich niet zo vreemd dat ze er dubbel in staan. Ze staan immers ook dubbel in de configuratie. Misschien is het beter om er, van elk, HP & Brother, er een weg te halen/verwijderen.

Waarom er geen IP adres is, dat snap ik dus ook niet. Heb jij enig idee?

[joop905]

Die dubbel is nergens voor nodig
waarom het ip nummer er niet bijstaat begrijp ik niet
bij mij is dat wel het geval

[yJi]

Die dubbel is nergens voor nodig
waarom het ip nummer er niet bijstaat begrijp ik niet
bij mij is dat wel het geval

Misschien zegt het onderstaande jouw iets meer dan mij...
jana@Joybook-R31:~$ hp-check -r

HP Linux Imaging and Printing System (ver. 3.12.2)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2011-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                   
2. Run-time check mode (-r or --run): Use this mode to determine if a distro   
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                     
3. Both compile- and run-time check mode (-b or --both) (Default): This mode   
will check both of the above cases (both compile- and run-time dependencies).   

Saving output in log file: hp-check.log

Initializing. Please wait...
 
---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux Joybook-R31 3.2.0-51-generic #77-Ubuntu SMP Wed Jul 24 20:21:10 UTC 2013 i686 i686 i386 GNU/Linux

Distribution:
ubuntu 12.04

Checking Python version...
OK, version 2.7.3 installed

Checking PyQt 4.x version...
OK, version 4.9.1 installed.

Checking for CUPS...
Status: scheduler is running
warning: Version: (cups-config) Not available. Unable to determine installed version of CUPS.)
warning: /etc/cups/cupsd.conf file not found or not accessible.

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 1.0.0


------------------------
| RUNTIME DEPENDENCIES |
------------------------


Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 3.12.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.

[hplip]
version=3.12.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.12.2
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0



Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 30-07-13 14:29:27
version = 3.12.2

[settings]
systray_visible = 0
systray_messages = 0

[last_used]
device_uri =
printer_name =
working_dir = .

[commands]
scan = /usr/bin/simple-scan %SANE_URI%

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
interval = 5
device_list =

[fax]
voice_phone =
email_address =



--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI                        Model             
  --------------------------------  ------------------
  hp:/usb/PSC_1400_series?serial=C  HP PSC 1400 series
  N617D90P204DZ                                       

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

 
Brother-MFC-J5910DW
-------------------
Type: Unknown
Device URI: dnssd://Brother%20MFC-J5910DW._pdl-datastream._tcp.local/
PPD: /etc/cups/ppd/Brother-MFC-J5910DW.ppd
PPD Description: Brother MFC-J5910DW CUPS
Printer status: printer Brother-MFC-J5910DW is idle.  enabled since ma 29 jul 2013 23:51:41 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

HPPSC1400
---------
Type: Unknown
Device URI: http://hostname:631/ipp/
PPD: /etc/cups/ppd/HPPSC1400.ppd
PPD Description: HP PSC 1400 Series, hpcups 3.12.2
Printer status: printer HPPSC1400 is idle.  enabled since vr 26 jul 2013 18:00:28 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

PSC-1400-series
---------------
Type: Unknown
Device URI: usb://HP/PSC%201400%20series?serial=CN617D90P204DZ&interface=1
PPD: /etc/cups/ppd/PSC-1400-series.ppd
PPD Description: HP PSC 1400 Series, hpcups 3.12.2
Printer status: printer PSC-1400-series is idle.  enabled since di 30 jul 2013 14:26:40 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
device `hpaio:/usb/PSC_1400_series?serial=CN617D90P204DZ' is a Hewlett-Packard PSC_1400_series all-in-one


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.


 
-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x4d11 at 002:002:
    Device URI: hp:/usb/PSC_1400_series?serial=CN617D90P204DZ
    Device node: /dev/bus/usb/002/002
    Mode: 0664
getfacl: Voorafgaande '/' in absolute padnamen worden verwijderd
# file: dev/bus/usb/002/002
# owner: root
# group: lp
user::rw-
user:jana:rw-
group::rw-
mask::rw-
other::r--



---------------
| USER GROUPS |
---------------

jana adm disk dialout fax cdrom floppy tape sudo audio dip backup video plugdev fuse scanner lpadmin nopasswdlogin sambashare

error: User needs to be member of group 'lp' to enable print, scan & fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

error: 4 errors and/or warnings.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html


Done.
jana@Joybook-R31:~$

[yJi]

Hoe stel je dat ook weer in dat je lid bent/wordt van de lp groep...

[joop905]

probeer deze eens

Code: [Selecteer]

sudo adduser saned lp


Om te controleren of de scanner de juiste rechten heeft

Code: [Selecteer]

sudo -s
su -s /bin/bash saned
scanimage -L

[yJi]

probeer deze eens

Code: [Selecteer]

sudo adduser saned lp


Om te controleren of de scanner de juiste rechten heeft

Code: [Selecteer]

sudo -s
su -s /bin/bash saned
scanimage -L

Klopt dit? Alleen de HP staat erin, maar ook wel logisch...want de Brother is een netwerk aio.
jana@Joybook-R31:~$ sudo -s
[sudo] password for jana:
root@Joybook-R31:~# su -s /bin/bash saned
saned@Joybook-R31:/home/jana$ scanimage -L
device `hpaio:/usb/PSC_1400_series?serial=CN617D90P204DZ' is a Hewlett-Packard PSC_1400_series all-in-one
saned@Joybook-R31:/home/jana$

[joop905]

Zou alles niet veel makkelijker worden
als die Brother-MFC-J5910DW op de (pc)usb wordt aangesloten
en dan die HPPSC1400 op de Fritz!box 7360 Router
Hp is een stuk gebruiksvriendelijker

[yJi]

Zou alles niet veel makkelijker worden
als die Brother-MFC-J5910DW op de (pc)usb wordt aangesloten
en dan die HPPSC1400 op de Fritz!box 7360 Router
Hp is een stuk gebruiksvriendelijker

Op zich heb je wel gelijk...ware het niet dat de Brother niet werkt op USB-poorten... in XP sowieso niet dan stopt het fijne XP...en onder Linux kreeg ik het ook toen niet aan het printen onder USB, Joop.
Pas als netwerkprinter is de brother pas aan het printen gegaan (linux & xp) en ja ik weet natuurlijk dat het scannen niet lukt...ook niet vanaf het netwerk. De HP heeft daar geen probleem mee, als ie, die brother, het dan maar deed onder USB in XP, maar ja....

[joop905]

Misschien moet je xp herinstalleren of gewoon verwijderen (troep)
Brother-MFC-J5910DW die moet kunnen werken onder USB Xubuntu ook de scanner