externe usb schijven worden niet gekoppeld

[hang-oor]

De uitkomst is helemaal leeg.

Ik heb daarnaast nog even gekeken met de live cd naar de uitkomst van mount. De eerste keer met aangekoppelde disk en de twee keer zonder. De laatste 2 regels van de eerste uitkomst van mount geeft de gekoppelde externe schijf aan met de live cd.

Naar aanleiding daarvan heb ik ook nog even het volgende geprobeerd (zonder live cd)
sudo fdisk -l /dev/sdb1  en sudo fdisk -l /dev/sdb5 maar ook dan is de uitkomst leeg.





ubuntu@ubuntu:~$ mount
aufs on / type aufs (rw)
none on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
none on /dev type devtmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
/dev/sdb5 on /media/EXT3 type ext3 (rw,nosuid,nodev,uhelper=udisks)
/dev/sdb1 on /media/NTFS type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)



ubuntu@ubuntu:~$ mount
aufs on / type aufs (rw)
none on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
none on /dev type devtmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
ubuntu@ubuntu:~$

[hang-oor]

Ik heb het gevoel dat de oplossing dicht bij is. Wie geeft het laatste zetje in de juiste richting?

[vanadium]

Het feit dat je schijven niet gezien worden in "sudo fdisk -l" of "sudo blkid" is een zorg. Ook handmatig proberen aankoppelen is dan niet aan de orde. Dat wijst dikwijls in de richting van hardware falen, maar bij jou kan dat niet, daar het wel werkt met een live CD. Ik zie niet goed hoe het verder moet, behalve eens proberen herinstalleren (weinig kans dat dat het zal doen), of voorlopig bij een lagere versie van Ubuntu blijven, of een andere Linux distributie proberen.

Tenzij er nog iemand langskomt met meer diepgaande technische kennis, natuurlijk...

[jan11000]

Probeer eens met 5x lsusb in de terminal, bij een oudere versie moest ik dit doen om de hd zichtbaar te maken.

[hang-oor]

Met lsusb is de disk wel zichtbaar.

Van het bericht van Vanadium wordt ik minder blij. Maar misschien komt er nog wel een oplossing....

[vanadium]

Wat bedoel je, dat de schijf zichtbaar wordt?

[Flup]

Ik zit met hetzelfde probleem denk ik
in lsusb is mijn mp3 speler (ook philips, toevallig) gewoon te zien
ook kan ik gewoon in rhythmbox synchronizeren met de speler
Maar ik raak dus nergens in de mappen van de mp3-speler om gewone bestanden op te kunnen zetten..
Ik heb wel op http://www.webupd8.org/2010/05/fix-usb-devices-automount-not-working.html gevonden dat de floppy in de bios uitzetten een oplossin zou kunnen bieden

[Gijsbert]

Even een wilde gok. Wat is de uitkomst van sudo gedit /etc/fstab  Staat er een regel in die er niet in thuis hoort? Bijv een gemounte cdrom, welke normaal niet gemount hoort te zijn? Zie https://bugs.launchpad.net/ubuntu/+source/hal/+bug/200287
En dan geen wilde gok.
Wat geeft sudo gedit /var/log/messages  als hier niets instaat type dan sudo gedit /var/log/messages.0  ook niets dan
sudo gedit /var/log/messages.1  etc. tot je wel tekst krijgt.

[hang-oor]

Uitkomst van edit /etc/fstab (zonder de externe schijf te koppelen)

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc                                       /proc           proc  nodev,noexec,nosuid       0  0 
# / was on /dev/sda5 during installation
UUID=9c3d5dd8-0ef4-4b2e-9887-dd8b4a0e8eac  /               ext4  errors=remount-ro         0  1 
# /home was on /dev/sda6 during installation
UUID=59df141e-12a6-4982-b65e-b61005e982cd  /home           ext4  defaults                  0  2 
# swap was on /dev/sda7 during installation
UUID=4c54167e-adcf-461f-baff-4378ce224843  none            swap  sw                        0  0 
/dev/fd0                                   /media/floppy0  auto  rw,user,noauto,exec,utf8  0  0 
/dev/sda8                                  /media/sda8     ext4  defaults                  0  0 
/dev/sda9                                  /media/sda9     ext4  defaults                  0  0 

[hang-oor]

De uitkomst van gedit /var/log/messages is te lang om compleet te kunnen plakken.
Waar ben je specifiek naar op zoek?

[hang-oor]

Ik heb ook even de tip geprobeerd van de floppy disk. Helaas werkt deze niet. Heb de floppy zowel uitgezet in de bios als hardware matig losgekoppeld. Echter zonder resultaat.

[vanadium]

Wat bedoel je, dat de schijf zichtbaar wordt?

Met het volgende commando kan je de laatste 40 regels van "messages" op je scherm toveren.

Code: [Selecteer]

cat /var/log/messages | tail -n 40
Dat zijn de berichten van de kernel, die mogelijk kunnen aangeven waarom je USB's niet verschijnen.

[Gijsbert]

De uitkomst van gedit /var/log/messages is te lang om compleet te kunnen plakken.
Waar ben je specifiek naar op zoek?

Ik ben op zoek naar een regel die niet in je fstab hoort te staan, bijv van de cd-rom speler, deze hoort pas aangekoppeld te zijn als je een cd erin stopt. Verder zie het bericht hier boven van Vanadium. Je kan ook een lange tekst hier plakken door deze tussen  code tags te zetten.
Deze verkrijg je door op de knop met # te klikken, die boven het bericht staat wat je typt, dan krijg je dit:

Code: [Selecteer]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-25-generic (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #45-Ubuntu SMP Sat Oct 16 19:52:42 UTC 2010 (Ubuntu 2.6.32-25.45-generic 2.6.32.21+drm33.7)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=d674dc0b-6e05-4654-ac27-c9ab3ed36d9c ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[    0.000000]  BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CCFFF write-protect
[    0.000000]   CD000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (usable)
[    0.000000]  modified: 0000000000001000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007fee0000 (usable)
[    0.000000]  modified: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[    0.000000]  modified: 000000007fee3000 - 000000007fef0000 (ACPI data)
[    0.000000]  modified: 000000007fef0000 - 000000007ff00000 (reserved)
[    0.000000]  modified: 00000000f4000000 - 00000000f8000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-000000007fee0000
[    0.000000] NX (Execute Disable) protection: active
[    0.000000]  0000000000 - 007fe00000 page 2M
[    0.000000]  007fe00000 - 007fee0000 page 4k
[    0.000000] kernel direct mapping tables up to 7fee0000 @ 8000-c000
[    0.000000] RAMDISK: 377fc000 - 37fefeaf
[    0.000000] ACPI: RSDP 00000000000f6cd0 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 000000007fee3040 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 000000007fee30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 000000007fee3180 03A31 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 000000007fee0000 00040
[    0.000000] ACPI: HPET 000000007fee6d00 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 000000007fee6d80 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: TAMG 000000007fee6dc0 0651A (v01 GBT    GBT   B0 5455312E BG?? 00020101)
[    0.000000] ACPI: APIC 000000007fee6c00 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 000000007feed940 003AB (v01  PmRef    CpuPm 00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000007fee0000
[    0.000000] Bootmem setup node 0 0000000000000000-000000007fee0000
[    0.000000]   NODE_DATA [000000000000a000 - 000000000000efff]
[    0.000000]   bootmap [000000000000f000 -  000000000001efdf] pages 10
[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 007fee0000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 0001a2ca64]    TEXT DATA BSS ==> [0001000000 - 0001a2ca64]
[    0.000000]   #3 [00377fc000 - 0037fefeaf]          RAMDISK ==> [00377fc000 - 0037fefeaf]
[    0.000000]   #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #5 [0001a2d000 - 0001a2d0f6]              BRK ==> [0001a2d000 - 0001a2d0f6]
[    0.000000]   #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
[    0.000000] found SMP MP-table at [ffff8800000f52d0] f52d0
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000001
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007fee0
[    0.000000] On node 0 totalpages: 523898
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 101 pages reserved
[    0.000000]   DMA zone: 3837 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7109 pages used for memmap
[    0.000000]   DMA32 zone: 512795 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:74100000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u524288
[    0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516632
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=d674dc0b-6e05-4654-ac27-c9ab3ed36d9c ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2047696k/2096000k available (5420k kernel code, 408k absent, 47896k reserved, 2974k data, 872k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:440
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 20971520 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2199.760 MHz processor.
[    0.010007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.52 BogoMIPS (lpj=21997600)
[    0.010035] Security Framework initialized
[    0.010057] AppArmor: AppArmor initialized
[    0.010256] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.011361] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.011981] Mount-cache hash table entries: 256
[    0.012138] Initializing cgroup subsys ns
[    0.012144] Initializing cgroup subsys cpuacct
[    0.012148] Initializing cgroup subsys memory
[    0.012157] Initializing cgroup subsys devices
[    0.012159] Initializing cgroup subsys freezer
[    0.012161] Initializing cgroup subsys net_cls
[    0.012183] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.012185] CPU: L2 cache: 2048K
[    0.012190] CPU 0/0x0 -> Node 0
[    0.012192] CPU: Physical Processor ID: 0
[    0.012193] CPU: Processor Core ID: 0
[    0.012196] mce: CPU supports 6 MCE banks
[    0.012204] CPU0: Thermal monitoring enabled (TM2)
[    0.012209] using mwait in idle threads.
[    0.012211] Performance Events: Core2 events, Intel PMU driver.
[    0.012217] ... version:                2
[    0.012219] ... bit width:              40
[    0.012220] ... generic registers:      2
[    0.012222] ... value mask:             000000ffffffffff
[    0.012224] ... max period:             000000007fffffff
[    0.012225] ... fixed-purpose events:   3
[    0.012227] ... event mask:             0000000700000003
[    0.014670] ACPI: Core revision 20090903
[    0.020760] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.020765] ftrace: allocating 22538 entries in 89 pages
[    0.030060] Setting APIC routing to flat
[    0.030374] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.130657] CPU0: Intel(R) Core(TM)2 Duo CPU     E4500  @ 2.20GHz stepping 0d
[    0.140000] Booting processor 1 APIC 0x1 ip 0x6000
[    0.020000] Initializing CPU#1
[    0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.020000] CPU: L2 cache: 2048K
[    0.020000] CPU 1/0x1 -> Node 0
[    0.020000] CPU: Physical Processor ID: 0
[    0.020000] CPU: Processor Core ID: 1
[    0.020000] CPU1: Thermal monitoring enabled (TM2)
[    0.290074] CPU1: Intel(R) Core(TM)2 Duo CPU     E4500  @ 2.20GHz stepping 0d
[    0.290081] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.300020] Brought up 2 CPUs
[    0.300022] Total of 2 processors activated (8799.42 BogoMIPS).
[    0.300444] CPU0 attaching sched-domain:
[    0.300448]  domain 0: span 0-1 level MC
[    0.300451]   groups: 0 1
[    0.300457] CPU1 attaching sched-domain:
[    0.300459]  domain 0: span 0-1 level MC
[    0.300462]   groups: 1 0
[    0.300559] devtmpfs: initialized
[    0.300559] regulator: core version 0.5
[    0.300559] Time: 17:14:31  Date: 12/05/10
[    0.300559] NET: Registered protocol family 16
[    0.300559] Trying to unpack rootfs image as initramfs...
[    0.300559] ACPI: bus type pci registered
[    0.300559] PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63
[    0.300559] PCI: MCFG area at f4000000 reserved in E820
[    0.301018] PCI: Using MMCONFIG at f4000000 - f7ffffff
[    0.301019] PCI: Using configuration type 1 for base access
[    0.310150] bio: create slab <bio-0> at 0
[    0.310686] ACPI: EC: Look up EC in DSDT
[    0.315116] ACPI: Interpreter enabled
[    0.315120] ACPI: (supports S0 S3 S4 S5)
[    0.315139] ACPI: Using IOAPIC for interrupt routing
[    0.321537] ACPI Warning: Incorrect checksum in table [TAMG] - F1, should be F0 (20090903/tbutils-314)
[    0.321654] ACPI: No dock devices found.
[    0.321757] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.321879] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.321883] pci 0000:00:01.0: PME# disabled
[    0.321947] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff]
[    0.321989] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.321993] pci 0000:00:1b.0: PME# disabled
[    0.322055] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.322058] pci 0000:00:1c.0: PME# disabled
[    0.322124] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.322127] pci 0000:00:1c.3: PME# disabled
[    0.322174] pci 0000:00:1d.0: reg 20 io port: [0xff00-0xff1f]
[    0.322224] pci 0000:00:1d.1: reg 20 io port: [0xfe00-0xfe1f]
[    0.322273] pci 0000:00:1d.2: reg 20 io port: [0xfd00-0xfd1f]
[    0.322321] pci 0000:00:1d.3: reg 20 io port: [0xfc00-0xfc1f]
[    0.322369] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
[    0.322534] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.322538] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.322542] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.322545] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.322586] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.322592] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.322599] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
Je zit wel vast aan maximaal 2000 tekens per bericht, dus of in delen of als tekst bijlage dat kan met Extra opties, links onder je bericht.

[hang-oor]

Ik zie wel iets verdachts in het log.

Een warning m.b.t. het mounten; 'warning: maximal mount count reached, running e2fsck is recommended'
Deze warning staat vrijwel boven aan (circa de 10e regel van boven) in onderstaande code.

De laatste 40 regels van var/log/messages

Code: [Selecteer]

hangoor@hangoor-desktop:~$ cat /var/log/messages | tail -n 40
Dec  6 21:10:58 hangoor-desktop kernel: [   14.432812] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
Dec  6 21:10:58 hangoor-desktop kernel: [   14.473822] usbcore: registered new interface driver ndiswrapper
Dec  6 21:10:58 hangoor-desktop kernel: [   16.098690] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec  6 21:10:58 hangoor-desktop kernel: [   16.098704] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Dec  6 21:10:58 hangoor-desktop kernel: [   16.099822] NVRM: loading NVIDIA UNIX x86 Kernel Module  260.19.06  Mon Sep 13 06:35:06 PDT 2010
Dec  6 21:10:58 hangoor-desktop kernel: [   16.692728] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
Dec  6 21:10:58 hangoor-desktop kernel: [   16.692748] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Dec  6 21:10:58 hangoor-desktop kernel: [   16.747716] EXT4-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended
Dec  6 21:10:58 hangoor-desktop kernel: [   16.755462] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
Dec  6 21:10:58 hangoor-desktop kernel: [   16.889158] EXT4-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended
Dec  6 21:10:58 hangoor-desktop kernel: [   16.893897] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
Dec  6 21:10:58 hangoor-desktop kernel: [   16.930690] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Dec  6 21:10:58 hangoor-desktop kernel: [   17.468657] skge 0000:00:0a.0: eth0: enabling interface
Dec  6 21:10:58 hangoor-desktop kernel: [   17.472916] type=1400 audit(1291666258.711:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=945 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.482943] type=1400 audit(1291666258.719:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=946 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.483229] type=1400 audit(1291666258.719:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=946 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.483393] type=1400 audit(1291666258.719:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=946 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.484316] ADDRCONF(NETDEV_UP): eth0: link is not ready
Dec  6 21:10:58 hangoor-desktop kernel: [   17.501995] type=1400 audit(1291666258.739:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=947 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.505963] type=1400 audit(1291666258.743:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=947 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.508778] type=1400 audit(1291666258.747:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=947 comm="apparmor_parser"
Dec  6 21:10:59 hangoor-desktop kernel: [   17.948223] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
Dec  6 21:10:59 hangoor-desktop kernel: [   17.948238] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
Dec  6 21:10:59 hangoor-desktop kernel: [   17.948418] EMU10K1_Audigy 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Dec  6 21:10:59 hangoor-desktop kernel: [   17.950847] Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
Dec  6 21:10:59 hangoor-desktop kernel: [   17.965650] VIA 82xx Audio 0000:00:11.5: enabling device (0000 -> 0001)
Dec  6 21:10:59 hangoor-desktop kernel: [   17.965659] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Dec  6 21:11:00 hangoor-desktop kernel: [   18.848975] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
Dec  6 21:11:00 hangoor-desktop kernel: [   18.851989] EXT4-fs (sda8): re-mounted. Opts: commit=0
Dec  6 21:11:00 hangoor-desktop kernel: [   18.854872] EXT4-fs (sda9): re-mounted. Opts: commit=0
Dec  6 21:11:00 hangoor-desktop kernel: [   18.924625] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
Dec  6 21:11:00 hangoor-desktop kernel: [   18.924639] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
Dec  6 21:11:00 hangoor-desktop kernel: [   18.924723] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
Dec  6 21:11:00 hangoor-desktop kernel: [   19.458039] EXT4-fs (sda6): re-mounted. Opts: commit=0
Dec  6 21:11:00 hangoor-desktop kernel: [   19.680401] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Dec  6 21:11:03 hangoor-desktop kernel: [   22.471063] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
Dec  6 21:11:03 hangoor-desktop kernel: [   22.474359] EXT4-fs (sda8): re-mounted. Opts: commit=0
Dec  6 21:11:03 hangoor-desktop kernel: [   22.477080] EXT4-fs (sda9): re-mounted. Opts: commit=0
Dec  6 21:11:03 hangoor-desktop kernel: [   22.479910] EXT4-fs (sda6): re-mounted. Opts: commit=0
Dec  6 21:11:18 hangoor-desktop kernel: [   37.265515] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
hangoor@hangoor-desktop:~$ cat /var/log/messages | tail -n 40
Dec  6 21:10:58 hangoor-desktop kernel: [   14.432812] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
Dec  6 21:10:58 hangoor-desktop kernel: [   14.473822] usbcore: registered new interface driver ndiswrapper
Dec  6 21:10:58 hangoor-desktop kernel: [   16.098690] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec  6 21:10:58 hangoor-desktop kernel: [   16.098704] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Dec  6 21:10:58 hangoor-desktop kernel: [   16.099822] NVRM: loading NVIDIA UNIX x86 Kernel Module  260.19.06  Mon Sep 13 06:35:06 PDT 2010
Dec  6 21:10:58 hangoor-desktop kernel: [   16.692728] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
Dec  6 21:10:58 hangoor-desktop kernel: [   16.692748] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Dec  6 21:10:58 hangoor-desktop kernel: [   16.747716] EXT4-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended
Dec  6 21:10:58 hangoor-desktop kernel: [   16.755462] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
Dec  6 21:10:58 hangoor-desktop kernel: [   16.889158] EXT4-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended
Dec  6 21:10:58 hangoor-desktop kernel: [   16.893897] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
Dec  6 21:10:58 hangoor-desktop kernel: [   16.930690] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Dec  6 21:10:58 hangoor-desktop kernel: [   17.468657] skge 0000:00:0a.0: eth0: enabling interface
Dec  6 21:10:58 hangoor-desktop kernel: [   17.472916] type=1400 audit(1291666258.711:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=945 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.482943] type=1400 audit(1291666258.719:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=946 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.483229] type=1400 audit(1291666258.719:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=946 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.483393] type=1400 audit(1291666258.719:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=946 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.484316] ADDRCONF(NETDEV_UP): eth0: link is not ready
Dec  6 21:10:58 hangoor-desktop kernel: [   17.501995] type=1400 audit(1291666258.739:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=947 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.505963] type=1400 audit(1291666258.743:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=947 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.508778] type=1400 audit(1291666258.747:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=947 comm="apparmor_parser"
Dec  6 21:10:59 hangoor-desktop kernel: [   17.948223] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
Dec  6 21:10:59 hangoor-desktop kernel: [   17.948238] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
Dec  6 21:10:59 hangoor-desktop kernel: [   17.948418] EMU10K1_Audigy 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Dec  6 21:10:59 hangoor-desktop kernel: [   17.950847] Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
Dec  6 21:10:59 hangoor-desktop kernel: [   17.965650] VIA 82xx Audio 0000:00:11.5: enabling device (0000 -> 0001)
Dec  6 21:10:59 hangoor-desktop kernel: [   17.965659] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Dec  6 21:11:00 hangoor-desktop kernel: [   18.848975] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
Dec  6 21:11:00 hangoor-desktop kernel: [   18.851989] EXT4-fs (sda8): re-mounted. Opts: commit=0
Dec  6 21:11:00 hangoor-desktop kernel: [   18.854872] EXT4-fs (sda9): re-mounted. Opts: commit=0
Dec  6 21:11:00 hangoor-desktop kernel: [   18.924625] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
Dec  6 21:11:00 hangoor-desktop kernel: [   18.924639] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
Dec  6 21:11:00 hangoor-desktop kernel: [   18.924723] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
Dec  6 21:11:00 hangoor-desktop kernel: [   19.458039] EXT4-fs (sda6): re-mounted. Opts: commit=0
Dec  6 21:11:00 hangoor-desktop kernel: [   19.680401] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Dec  6 21:11:03 hangoor-desktop kernel: [   22.471063] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
Dec  6 21:11:03 hangoor-desktop kernel: [   22.474359] EXT4-fs (sda8): re-mounted. Opts: commit=0
Dec  6 21:11:03 hangoor-desktop kernel: [   22.477080] EXT4-fs (sda9): re-mounted. Opts: commit=0
Dec  6 21:11:03 hangoor-desktop kernel: [   22.479910] EXT4-fs (sda6): re-mounted. Opts: commit=0
Dec  6 21:11:18 hangoor-desktop kernel: [   37.265515] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready


De gehele code is ook te groot om als tekstbestand bij te voegen. Eventueel kan ik het wel in 3 delen knippen en als 3 berichten posten.Maar mogelijk is de reeds het bijgevoegde deel van het log voldoende.

[vanadium]

De waarschuwing betekent dat je eens je partities op je interne harde schijf moet testen.

De output vermeldt niets over een USB. Ontkoppel de schijf eens, plug dan de schijf in en voer daarna eens opnieuw het commando "dmesg | tail n=30" uit.

Ik vrees echter dat het niets wordt, omdat je schijf ook niet in de output van sudo fdisk -l verschijnt.

Met lsusb is de disk wel zichtbaar.

Ik weet nog altijd niet wat je hier precies mee bedoelt. Zie je die verschijnen in nautilus? Kan je erop komen?

[hang-oor]

Opnieuw de laatste regels. Met gekoppelde externe disk. De disk wordt blijkbaar wel opgemerkt.

Code: [Selecteer]

hangoor@hangoor-desktop:~$ cat /var/log/messages | tail -n 40
Dec  6 21:10:58 hangoor-desktop kernel: [   14.473822] usbcore: registered new interface driver ndiswrapper
Dec  6 21:10:58 hangoor-desktop kernel: [   16.098690] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec  6 21:10:58 hangoor-desktop kernel: [   16.098704] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Dec  6 21:10:58 hangoor-desktop kernel: [   16.099822] NVRM: loading NVIDIA UNIX x86 Kernel Module  260.19.06  Mon Sep 13 06:35:06 PDT 2010
Dec  6 21:10:58 hangoor-desktop kernel: [   16.692728] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
Dec  6 21:10:58 hangoor-desktop kernel: [   16.692748] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Dec  6 21:10:58 hangoor-desktop kernel: [   16.747716] EXT4-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended
Dec  6 21:10:58 hangoor-desktop kernel: [   16.755462] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
Dec  6 21:10:58 hangoor-desktop kernel: [   16.889158] EXT4-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended
Dec  6 21:10:58 hangoor-desktop kernel: [   16.893897] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
Dec  6 21:10:58 hangoor-desktop kernel: [   16.930690] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Dec  6 21:10:58 hangoor-desktop kernel: [   17.468657] skge 0000:00:0a.0: eth0: enabling interface
Dec  6 21:10:58 hangoor-desktop kernel: [   17.472916] type=1400 audit(1291666258.711:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=945 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.482943] type=1400 audit(1291666258.719:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=946 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.483229] type=1400 audit(1291666258.719:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=946 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.483393] type=1400 audit(1291666258.719:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=946 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.484316] ADDRCONF(NETDEV_UP): eth0: link is not ready
Dec  6 21:10:58 hangoor-desktop kernel: [   17.501995] type=1400 audit(1291666258.739:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=947 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.505963] type=1400 audit(1291666258.743:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=947 comm="apparmor_parser"
Dec  6 21:10:58 hangoor-desktop kernel: [   17.508778] type=1400 audit(1291666258.747:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=947 comm="apparmor_parser"
Dec  6 21:10:59 hangoor-desktop kernel: [   17.948223] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
Dec  6 21:10:59 hangoor-desktop kernel: [   17.948238] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
Dec  6 21:10:59 hangoor-desktop kernel: [   17.948418] EMU10K1_Audigy 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Dec  6 21:10:59 hangoor-desktop kernel: [   17.950847] Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
Dec  6 21:10:59 hangoor-desktop kernel: [   17.965650] VIA 82xx Audio 0000:00:11.5: enabling device (0000 -> 0001)
Dec  6 21:10:59 hangoor-desktop kernel: [   17.965659] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Dec  6 21:11:00 hangoor-desktop kernel: [   18.848975] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
Dec  6 21:11:00 hangoor-desktop kernel: [   18.851989] EXT4-fs (sda8): re-mounted. Opts: commit=0
Dec  6 21:11:00 hangoor-desktop kernel: [   18.854872] EXT4-fs (sda9): re-mounted. Opts: commit=0
Dec  6 21:11:00 hangoor-desktop kernel: [   18.924625] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
Dec  6 21:11:00 hangoor-desktop kernel: [   18.924639] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
Dec  6 21:11:00 hangoor-desktop kernel: [   18.924723] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
Dec  6 21:11:00 hangoor-desktop kernel: [   19.458039] EXT4-fs (sda6): re-mounted. Opts: commit=0
Dec  6 21:11:00 hangoor-desktop kernel: [   19.680401] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Dec  6 21:11:03 hangoor-desktop kernel: [   22.471063] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
Dec  6 21:11:03 hangoor-desktop kernel: [   22.474359] EXT4-fs (sda8): re-mounted. Opts: commit=0
Dec  6 21:11:03 hangoor-desktop kernel: [   22.477080] EXT4-fs (sda9): re-mounted. Opts: commit=0
Dec  6 21:11:03 hangoor-desktop kernel: [   22.479910] EXT4-fs (sda6): re-mounted. Opts: commit=0
Dec  6 21:11:18 hangoor-desktop kernel: [   37.265515] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Dec  6 21:52:38 hangoor-desktop kernel: [ 2518.180012] usb 1-7: new high speed USB device using ehci_hcd and address 4
hangoor@hangoor-desktop:~$



[hang-oor]

Met de disk zichtbaar door lsusb bedoel ik het volgende:

De uitkomst van lsusb in de terminal geeft wel de externe schijf aan De 'Philips (or NXP)' betreft de externe schijf. Zie onderstaande output.

Code: [Selecteer]

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 005: ID 046d:c222 Logitech, Inc. G15 Keyboard / LCD
Bus 003 Device 004: ID 046d:c221 Logitech, Inc. G11/G15 Keyboard / Keyboard
Bus 003 Device 003: ID 046d:c223 Logitech, Inc. G11/G15 Keyboard / USB Hub
Bus 003 Device 002: ID 046d:c041 Logitech, Inc. G5 Laser Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0471:2018 Philips (or NXP)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


[vanadium]

Code: [Selecteer]

Dec  6 21:52:38 hangoor-desktop kernel: [ 2518.180012] usb 1-7: new high speed USB device using ehci_hcd and address 4
Dit is het enige wat verwijst naar de betreffende USB poort. Berichten  van herkenning van een bestandssysteem en pogingen tot aankoppelen, ontbreken. Normaal heb je daar een vijftal lijnen voor. Je probeert ook andere USB poorten? Een andere kabel?

[hang-oor]

Het ligt zeker niet aan de hardware. Met de live cd werkt alles namelijk prima en ook onder windows.

Na de updates van vandaag (9 dec 2010) heb ik direct mijn externe disk geprobeerd. Tot mijn verrassing werkte deze direct. Helaas na de noodzakelijke herstart om de update te voltooien werkte de externe disk niet meer. Erg vreemd allemaal. Maar mogelijk geeft dit wel een aanwijzing.

Omdat ik zelf dacht dat het mogelijk een rechten probleem is heb ik ook het volgende geprobeerd. Nautilus gestart met 'gksudo nautilus' en de disk verbonden met de pc. Ook dit had geen effect. Wel zag ik bij het opstrten van nautilus de volgende melding in de terminal verschijnen:

Code: [Selecteer]

(nautilus:1710): GConf-CRITICAL **: gconf_value_free: assertion `value != NULL' failed
eedesktop.ConsoleKit.Manager.GeneralError: Unable to lookup session information for process '1710'
Nautilus-Share-Message: Called "net usershare info" but it failed: 'net usershare' gaf fout 255: net usershare: cannot open usershare directory /var/lib/samba/usershares. Error Bestand of map bestaat niet
Please ask your system administrator to enable user sharing.


Dit is mogelijk nog een aanwijzing?

[Gijsbert]

Je gebruikt samba, zo te zien? Dan zou je de rechten in de samba configuratie file aan moeten passen.

[hang-oor]

Ik gebruik geen (in ieder geval niet bewust) samba. Ik heb een standaard 10.10 installatie, met enkel wat aanvullende pakketten uit het software centrum. Ik zou ook niet weten hoe ik de configuratie file moet aanpassen.

[Gijsbert]

Als je Windows en Ubuntu samen op een netwerk wilt gebruiken heb je Samba nodig.
Standaard wordt samba niet geïnstalleerd. Of Samba is niet geconfigureerd of niet geinstalleerd vandaar ook die foutmelding cannot open usershare directory /var/lib/samba/usershares
Als ik het goed begrijp wil je Windows en Ubuntu samen gebruiken. Daarvoor moet je ook Samba installeren en configureren.
Kijk daarvoor op deze link http://www.multidesk.be/artikels/artikel/233/Bestanden-delen-tussen-Windows-en-Linux-via-Samba.html  en nog meer info http://samba.org/samba/docs/man/Samba-HOWTO-Collection/

[jan11000]

Installeer eens "mountmanager", daar staan ook instellingen voor usb in.
"usbmount" misschien ook proberen.

Dit "Disk Notifications" moet bij "system-preferences-startup applications" staan, dus met de pc opstarten.
"usr/lib/gnome-disk-utility/gdu-notification-daemon" is de opstart command.

[hang-oor]

Ik gebruik samba nergens voor en dat is ook niet de bedoeling.

Met 'mountmanager' wordt ook de disk niet gevonden. Ik heb inmiddels wel een gedeeltelijke oplossing. De externe disk wordt wel gekoppeld indien ik de pc opstart met de externe disk verbonden met de pc. Ook als ik dan de disk verwijder en opnieuw koppel (zonder dat ik tussendoor de pc herstart) werkt alles prima.

De "usr/lib/gnome-disk-utility/gdu-notification-daemon" wordt wel automatisch gestart.

Wel een vreemd probleem, alles blijkt dus wel te werken maar niet op het juiste moment.

[Gijsbert]

Sorry, ik had begrepen dat je de schijf ook vanaf een Windows machine wilde benaderen.

Code: [Selecteer]

Mounting the External File System (Hard Drive)

To mount your hard drive you need to use the mount command. (To unmount the drive when you are ready to unplug it and take it home, use the umount command.) Here’s an example:

mkdir /mnt/usbdrive
mount /dev/sda1 /mnt/usbdrive

The above command first creates a directory in your /mnt folder, typically the folder will be descriptive of the device, so we use /mnt/usbdrive. This only has to be done once, as you won’t be deleting this folder. This folder will be your mount point for the external hard drive.

The second line mounts the device at the /dev/sda1 location to the /mnt/usbdrive directory.

Now you can reference your hard drive from the command line using the folder /mnt/usbdrive.
Automount In the Terminal

To have your hard drive mount each time your server is restarted, you must edit your /etc/fstab file. Simply add at the bottom of your /etc/fstab file:

/dev/sda1     /mnt/usbdrive     ext3     defaults 0   0

The first argument (/dev/sda1) tells the system what device to mount, and the second argument (/mnt/usbdrive) tells the system where to mount it. The third argument is the filesystem type (ext3). The fourth argument (defaults) tells the system what options to apply to the device, so in this case we’ll just use the defaults. The fifth and sixth arguments (both zeros) tell the system if the filesystem should be backed up using the dump utility, and the second zero tells the system whether to process the device when fsck is run. We can leave them both to zero for now.

Now you have a mounted hard drive that you can use for all your company backups, and by reading our previous two articles you can setup a script to automate your backup. Van http://www.jarrodgoddard.com/linux-web-hosting/mounting-an-external-usb-drive-in-linux
Natuurlijk wel het file type aanpassen, bijv ext3 naar fat32 als je externe schijf zo is geformatteerd.