[Opgelost] Foxyproxy en Tor

[Willy4]

Goedemiddag,

Ik probeer de BBC-i speler werkend te krijgen met behulp van Tor en Foxyproxy met de volgende handleidingen:
http://www.kaisersblog.com/2009/01/how-to-watch-hulu-and-bbc-iplayer-outside-us-or-uk/
http://hurwi.net/blog/?p=28
Dat lukt allemaal prima tot punt 6. Daarin wordt gesteld:

Code: [Selecteer]

When you install Foxy Proxy, it’ll ask you if you want to add a Tor proxy to it’s settings.
You’ll want to set up the Tor Proxy to have the following 2 patterns:
BBC iPlayer pattern – http://*bbc.co.uk/* and Tor Check pattern – http://torcheck.xenobite.eu/*Edoch... Vidalia is 'Connected to Tor network', maar Foxyproxy vraagt bij installatie helemaal niet naar Tor.
Kan iemand mij helpen met hoe ik Foxyproxy moet instellen met de in de handleiding genoemde patronen?
Alvast bedankt

[Willy4]

Ik ben al iets verder. Binnen de instellingen van Foxyproxy kun je kiezen voor de Tor-wizard. Daar kun je de instellingen ingeven zoals aangegeven. So far, so good. Ik heb proxyverbinding, maar dan doet zich een ander probleem voor:
Bij testen (punt 7 in de handleiding) wordt hardnekkig een Deens proxy-adres getoond. En dat terwijl ik alleen Britse adressen heb toegevoegd aan de /etc/tor/torrc (punt 3).
Iemand enig idee hoe ik aansluiting via een Brits adres krijg?

[Rachid]

Het lijkt me dat het probleem zich in tor voordoet. Misschien kun je jouw torrc ff posten?

[Willy4]

Het lijkt me dat het probleem zich in tor voordoet. Misschien kun je jouw torrc ff posten?

Dat kan

Code: [Selecteer]

## Configuration file for a typical Tor user
## Last updated 12 April 2009 for Tor 0.2.1.14-rc.
## (May or may not work for much older or much newer versions of Tor.)
##
## Lines that begin with "## " try to explain what's going on. Lines
## that begin with just "#" are disabled commands: you can enable them
## by removing the "#" symbol.
##
## See 'man tor', or https://www.torproject.org/tor-manual.html,
## for more options you can use in this file.
##
## Tor will look for this file in various places based on your platform:
## https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#torrc


## Replace this with "SocksPort 0" if you plan to run Tor only as a
## relay, and not make any local application connections yourself.
SocksPort 9050 # what port to open for local application connections
SocksListenAddress 127.0.0.1 # accept connections only from localhost
#SocksListenAddress 192.168.0.1:9100 # listen on this IP:port also

## Entry policies to allow/deny SOCKS requests based on IP address.
## First entry that matches wins. If no SocksPolicy is set, we accept
## all (and only) requests from SocksListenAddress.
#SocksPolicy accept 192.168.0.0/16
#SocksPolicy reject *

## Logs go to stdout at level "notice" unless redirected by something
## else, like one of the below lines. You can have as many Log lines as
## you want.
##
## We advise using "notice" in most cases, since anything more verbose
## may provide sensitive information to an attacker who obtains the logs.
##
## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
#Log notice file /var/log/tor/notices.log
## Send every possible message to /var/log/tor/debug.log
#Log debug file /var/log/tor/debug.log
## Use the system log instead of Tor's logfiles
#Log notice syslog
## To send all messages to stderr:
#Log debug stderr

## Uncomment this to start the process in the background... or use
## --runasdaemon 1 on the command line. This is ignored on Windows;
## see the FAQ entry if you want Tor to run as an NT service.
#RunAsDaemon 1

## The directory for keeping all the keys/etc. By default, we store
## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
#DataDirectory /var/lib/tor

## The port on which Tor will listen for local connections from Tor
## controller applications, as documented in control-spec.txt.
#ControlPort 9051
## If you enable the controlport, be sure to enable one of these
## authentication methods, to prevent attackers from accessing it.
#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C
#CookieAuthentication 1

############### This section is just for location-hidden services ###

## Once you have configured a hidden service, you can look at the
## contents of the file ".../hidden_service/hostname" for the address
## to tell people.
##
## HiddenServicePort x y:z says to redirect requests on port x to the
## address y:z.

#HiddenServiceDir /var/lib/tor/hidden_service/
#HiddenServicePort 80 127.0.0.1:80

#HiddenServiceDir /var/lib/tor/other_hidden_service/
#HiddenServicePort 80 127.0.0.1:80
#HiddenServicePort 22 127.0.0.1:22

################ This section is just for relays #####################
#
## See https://www.torproject.org/docs/tor-doc-relay for details.

## Required: what port to advertise for incoming Tor connections.
#ORPort 9001
## If you want to listen on a port other than the one advertised
## in ORPort (e.g. to advertise 443 but bind to 9090), uncomment the
## line below too. You'll need to do ipchains or other port forwarding
## yourself to make this work.
#ORListenAddress 0.0.0.0:9090

## A handle for your relay, so people don't have to refer to it by key.
#Nickname ididnteditheconfig

## The IP address or full DNS name for your relay. Leave commented out
## and Tor will guess.
#Address noname.example.com

## Define these to limit how much relayed traffic you will allow. Your
## own traffic is still unthrottled. Note that RelayBandwidthRate must
## be at least 20 KBytes.
#RelayBandwidthRate 100 KBytes  # Throttle traffic to 100KB/s (800Kbps)
#RelayBandwidthBurst 200 KBytes # But allow bursts up to 200KB/s (1600Kbps)

## Contact info to be published in the directory, so we can contact you
## if your relay is misconfigured or something else goes wrong. Google
## indexes this, so spammers might also collect it.
#ContactInfo Random Person <nobody AT example dot com>
## You might also include your PGP or GPG fingerprint if you have one:
#ContactInfo 1234D/FFFFFFFF Random Person <nobody AT example dot com>

## Uncomment this to mirror directory information for others. Please do
## if you have enough bandwidth.
#DirPort 9030 # what port to advertise for directory connections
## If you want to listen on a port other than the one advertised
## in DirPort (e.g. to advertise 80 but bind to 9091), uncomment the line
## below too. You'll need to do ipchains or other port forwarding yourself
## to make this work.
#DirListenAddress 0.0.0.0:9091
## Uncomment to return an arbitrary blob of html on your DirPort. Now you
## can explain what Tor is if anybody wonders why your IP address is
## contacting them. See contrib/tor-exit-notice.html for a sample.
#DirPortFrontPage /etc/tor/exit-notice.html

## Uncomment this if you run more than one Tor relay, and add the identity
## key fingerprint of each Tor relay you control, even if they're on
## different networks. You declare it here so Tor clients can avoid
## using more than one of your relays in a single circuit. See
## https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#MultipleServers
#MyFamily $keyid,$keyid,...

## A comma-separated list of exit policies. They're considered first
## to last, and the first match wins. If you want to _replace_
## the default exit policy, end this with either a reject *:* or an
## accept *:*. Otherwise, you're _augmenting_ (prepending to) the
## default exit policy. Leave commented to just use the default, which is
## described in the man page or at
## https://www.torproject.org/documentation.html
##
## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
## for issues you might encounter if you use the default exit policy.
##
## If certain IPs and ports are blocked externally, e.g. by your firewall,
## you should update your exit policy to reflect this -- otherwise Tor
## users will be told that those destinations are down.
##
#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more
#ExitPolicy accept *:119 # accept nntp as well as default exit policy
#ExitPolicy reject *:* # no exits allowed
#
## Bridge relays (or "bridges") are Tor relays that aren't listed in the
## main directory. Since there is no complete public list of them, even if an
## ISP is filtering connections to all the known Tor relays, they probably
## won't be able to block all the bridges. Also, websites won't treat you
## differently because they won't know you're running Tor. If you can
## be a real relay, please do; but if not, be a bridge!
#BridgeRelay 1
#ExitPolicy reject *:*

StrictExitNodes 1
exitnodes 0000000000Marauder,AB1992,agostino,anonion,anotherlink,Antje,Arsemaggots,Artois,atacama,candybar,ChubZee,cobald,colinwillsdorkyahoo,dementia,DestroyTerrorismNow,distorted,docTor,DVB,elsie,ephemer2,ezz,femben,Freaky,g8s8skhakj,gigatux,Gizmoguy,gouda,HubicPairs,Ishi,Knowledge,Nickname,Mallory,matsurika,messiah001,MrNiceGuy,muckelbude,netraserver,oinniun,opheliaXg5nXcoXuk,PartTimeAnonymizer,procurator,pya23,radicalabacus,Ragnaruss,speleo,Stella,t0rp0r,toraxisofevil,TorG,tortureisevil

[Rachid]

Alweer een tijdje geleden dat ik met TOR heb gewerkt. Je moe(s)t sowieso TOR herstarten wanneer je een wijziging doet aan torrc!

Verder zie ik in de FAQ dat je ook een land code kunt instellen. Wat gebeurt er als je de laatste regel vervangt door: exitnodes UK ?

[Willy4]

Alweer een tijdje geleden dat ik met TOR heb gewerkt. Je moe(s)t sowieso TOR herstarten wanneer je een wijziging doet aan torrc!

Verder zie ik in de FAQ dat je ook een land code kunt instellen. Wat gebeurt er als je de laatste regel vervangt door: exitnodes UK ?

Goed plan op zich. Helaas ik krijg dan nog steeds geen adres in de UK.

[Rachid]

oei, het moet GB zijn ipv UK (zie ook stap 3 )
Doet ie het nu wel?

Vergeet niet te duimen wanneer je tor herstart!!!

[Willy4]

oei, het moet GB zijn ipv UK (zie ook stap 3 )
Doet ie het nu wel?

Vergeet niet te duimen wanneer je tor herstart!!!

Ik had in eerste instantie GB ingevuld, maar toen startte de testpagina helemaal niet. Met UK wel, maar zonder resultaat.
(Ik duim me een ongeluk )

Edit: Opgelost. Als ik Tor direct in de terminal start, krijg ik wel alleen Britse adressen. Vidalia neemt blijkbaar niet automatisch de instellingen van Tor over. Beetje jammer want ik vind zo'n grafisch tooltje wel handig. Straks toch eens kijken of dat niet is aan te passen.
Hoe dan ook de BBCi Player doet 't en dat ruimschoots voor de wedstrijd van vanavond

Wazzzaaa, bedankt voor het meedenken

[Rachid]

Achzo, mooi dat het nu werkt. Wellicht moet je die dingen die je in torrc instelt ergens in vidalia instellen. misschien in /etc/vidalia ofzo?
Toen ik tor gebruikte had ik dir RC in mn homedir. Dus in ~/.torrc  Misschien wordt die gebruikt?
succes verder en mooi dat het nu iig werkt.