1-4 seconden??? Wowiiee, daar kom ik niet aan. Bij mij ongeveer 90 seconden.
Maar ik heb dan ook een wat oudere laptop met een 4200 rpm schijf...
Kan iemand iets met zo'n log? Of kan iemand me er wat van uitleggen?
Bijvoorbeeld, die getallen tussen [...], is dat toevallig het aantal seconden sinds booten dat die opdracht wordt uitgevoerd?
[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d8000 size: 0000000000008000 end: 00000000000e0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fdf0000 end: 000000003fef0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fef0000 size: 000000000000c000 end: 000000003fefc000 type: 3
[ 0.000000] copy_e820_map() start: 000000003fefc000 size: 0000000000004000 end: 000000003ff00000 type: 4
[ 0.000000] copy_e820_map() start: 000000003ff00000 size: 0000000000080000 end: 000000003ff80000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003ff80000 size: 0000000000080000 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffb80000 size: 0000000000080000 end: 00000000ffc00000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fefc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fefc000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 000000003ff80000 (usable)
[ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 262016) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262016
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262016
[ 0.000000] On node 0 totalpages: 262016
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32385 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6d20
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x3fef64a0
[ 0.000000] ACPI: FADT (v001 INTEL 845M 0x06040000 PTL 0x0000004b) @ 0x3fefbf8c
[ 0.000000] ACPI: DSDT (v001 COMPAL 845M 0x06040000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000)
[ 0.000000] Detected 2492.837 MHz processor.
[ 12.258196] Built 1 zonelists. Total pages: 259969
[ 12.258201] Kernel command line: root=UUID=bb59e2df-4aec-4759-b784-3e431da1dc94 ro quiet splash
[ 12.258377] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 12.258388] mapped APIC to ffffd000 (0180c000)
[ 12.258393] Enabling fast FPU save and restore... done.
[ 12.258396] Enabling unmasked SIMD FPU exception support... done.
[ 12.258413] Initializing CPU#0
[ 12.258532] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 12.260166] Console: colour VGA+ 80x25
[ 12.261156] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 12.262112] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 12.294985] Memory: 1027804k/1048064k available (1992k kernel code, 19480k reserved, 900k data, 328k init, 130496k highmem)
[ 12.294999] virtual kernel memory layout:
[ 12.295000] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 12.295001] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 12.295002] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 12.295003] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 12.295004] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 12.295006] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 12.295007] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 12.295010] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 12.374317] Calibrating delay using timer specific routine.. 4989.70 BogoMIPS (lpj=9979412)
[ 12.374379] Security Framework v1.0.0 initialized
[ 12.374395] SELinux: Disabled at boot.
[ 12.374416] Mount-cache hash table entries: 512
[ 12.374651] CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000
[ 12.374666] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 12.374670] CPU: L2 cache: 512K
[ 12.374672] CPU: Hyper-Threading is disabled
[ 12.374675] CPU: After all inits, caps: bfebf9ff 00000000 00000000 00003080 00000400 00000000 00000000
[ 12.374692] Compat vDSO mapped to ffffe000.
[ 12.374699] Remapping vsyscall page to ffffe000
[ 12.374716] Checking 'hlt' instruction... OK.
[ 12.390485] SMP alternatives: switching to UP code
[ 12.390897] Freeing SMP alternatives: 11k freed
[ 12.391153] Early unpacking initramfs... done
[ 12.705559] ACPI: Core revision 20060707
[ 12.709385] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 12.715712] CPU0: Intel(R) Pentium(R) 4 CPU 2.50GHz stepping 07
[ 12.715720] SMP motherboard not detected.
[ 12.715722] Local APIC not detected. Using dummy APIC emulation.
[ 12.715767] Brought up 1 CPUs
[ 12.716065] Booting paravirtualized kernel on bare hardware
[ 12.716159] Time: 14:55:57 Date: 06/01/107
[ 12.716196] NET: Registered protocol family 16
[ 12.716315] EISA bus registered
[ 12.716321] ACPI: bus type pci registered
[ 12.735963] PCI: PCI BIOS revision 2.10 entry at 0xfd9a4, last bus=2
[ 12.735966] PCI: Using configuration type 1
[ 12.735968] Setting up standard PCI resources
[ 12.752695] ACPI: Interpreter enabled
[ 12.752699] ACPI: Using PIC for interrupt routing
[ 12.753219] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 12.753226] PCI: Probing PCI hardware (bus 00)
[ 12.754386] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 12.754391] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[ 12.754700] Boot video device is 0000:01:00.0
[ 12.754896] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[ 12.754973] PCI: Transparent bridge - 0000:00:1e.0
[ 12.755042] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[ 12.755045] Please report the result to linux-kernel to fix this permanently
[ 12.755067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 12.757921] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 12.757989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 12.758757] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[ 12.759028] ACPI: PCI Interrupt Link [LNKB] (IRQs *9)
[ 12.759286] ACPI: PCI Interrupt Link [LNKC] (IRQs *9)
[ 12.759540] ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
[ 12.759799] ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
[ 12.760043] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[ 12.760288] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled.
[ 12.760532] ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled.
[ 12.762976] ACPI: Device [FDDA] status [00000008]: functional but not present; setting present
[ 12.767207] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 12.767221] pnp: PnP ACPI init
[ 12.775244] pnp: PnP ACPI: found 11 devices
[ 12.775251] PnPBIOS: Disabled by ACPI PNP
[ 12.775325] PCI: Using ACPI for IRQ routing
[ 12.775329] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 12.780544] NET: Registered protocol family 8
[ 12.780547] NET: Registered protocol family 20
[ 12.781025] PCI: Bridge: 0000:00:01.0
[ 12.781029] IO window: 3000-3fff
[ 12.781034] MEM window: e8100000-e81fffff
[ 12.781038] PREFETCH window: f0000000-f7ffffff
[ 12.781050] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[ 12.781053] IO window: 00004400-000044ff
[ 12.781058] IO window: 00004800-000048ff
[ 12.781063] PREFETCH window: 50000000-53ffffff
[ 12.781068] MEM window: 58000000-5bffffff
[ 12.781073] PCI: Bridge: 0000:00:1e.0
[ 12.781077] IO window: 4000-4fff
[ 12.781083] MEM window: e8200000-e82fffff
[ 12.781089] PREFETCH window: 50000000-53ffffff
[ 12.781109] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 12.781392] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[ 12.781396] PCI: setting IRQ 9 as level-triggered
[ 12.781399] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 12.781441] NET: Registered protocol family 2
[ 12.817567] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 12.817840] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 12.819253] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 12.820209] TCP: Hash tables configured (established 131072 bind 65536)
[ 12.820216] TCP reno registered
[ 12.829664] checking if image is initramfs... it is
[ 13.443829] Freeing initrd memory: 6786k freed
[ 13.444361] audit: initializing netlink socket (disabled)
[ 13.444382] audit(1183301758.372:1): initialized
[ 13.444490] highmem bounce pool size: 64 pages
[ 13.444570] VFS: Disk quotas dquot_6.5.1
[ 13.444596] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 13.444666] io scheduler noop registered
[ 13.444670] io scheduler anticipatory registered
[ 13.444672] io scheduler deadline registered
[ 13.444682] io scheduler cfq registered (default)
[ 13.445018] isapnp: Scanning for PnP cards...
[ 13.798546] isapnp: No Plug & Play device found
[ 13.830788] Real Time Clock Driver v1.12ac
[ 13.830852] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 13.830992] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.832025] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.832600] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[ 13.832605] ACPI: PCI Interrupt 0000:00:1f.6[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 13.832614] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 13.832706] mice: PS/2 mouse device common for all mice
[ 13.833370] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 13.833691] input: Macintosh mouse button emulation as /class/input/input0
[ 13.833731] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 13.833737] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 13.834005] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 13.837661] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 13.840172] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.840178] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 13.840181] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 13.840184] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 13.840187] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 13.840386] EISA: Probing bus 0 at eisa.0
[ 13.840395] Cannot allocate resource for EISA slot 1
[ 13.840399] Cannot allocate resource for EISA slot 2
[ 13.840401] Cannot allocate resource for EISA slot 3
[ 13.840403] Cannot allocate resource for EISA slot 4
[ 13.840420] EISA: Detected 0 cards.
[ 13.870486] TCP cubic registered
[ 13.870493] NET: Registered protocol family 1
[ 13.870524] Using IPI No-Shortcut mode
[ 13.870605] ACPI: (supports S0 S3 S4 S5)
[ 13.870652] Magic number: 15:454:939
[ 13.870801] hash matches device ptyya
[ 13.871386] Freeing unused kernel memory: 328k freed
[ 13.871451] Time: tsc clocksource has been installed.
[ 13.880554] input: AT Translated Set 2 keyboard as /class/input/input1
[ 15.141301] Capability LSM initialized
[ 15.282377] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 15.282384] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 15.931984] usbcore: registered new interface driver usbfs
[ 15.932022] usbcore: registered new interface driver hub
[ 15.932050] usbcore: registered new device driver usb
[ 15.933112] USB Universal Host Controller Interface driver v3.0
[ 15.933178] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 15.933193] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 15.933197] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 15.933368] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 15.933395] uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001860
[ 15.933537] usb usb1: configuration #1 chosen from 1 choice
[ 15.933568] hub 1-0:1.0: USB hub found
[ 15.933577] hub 1-0:1.0: 2 ports detected
[ 15.983793] SCSI subsystem initialized
[ 15.990015] libata version 2.20 loaded.
[ 16.018548] ieee1394: Initialized config rom entry `ip1394'
[ 16.035753] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 16.035759] ACPI: PCI Interrupt 0000:00:1d.1[b] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
[ 16.035773] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 16.035778] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 16.035811] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 16.035840] uhci_hcd 0000:00:1d.1: irq 9, io base 0x000018c0
[ 16.035956] usb usb2: configuration #1 chosen from 1 choice
[ 16.035985] hub 2-0:1.0: USB hub found
[ 16.035994] hub 2-0:1.0: 2 ports detected
[ 16.039844] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 16.039848] e100: Copyright(c) 1999-2006 Intel Corporation
[ 16.139561] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[ 16.139567] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[ 16.139581] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 16.139585] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 16.139619] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 16.139648] uhci_hcd 0000:00:1d.2: irq 9, io base 0x00001800
[ 16.139768] usb usb3: configuration #1 chosen from 1 choice
[ 16.139798] hub 3-0:1.0: USB hub found
[ 16.139809] hub 3-0:1.0: 2 ports detected
[ 16.222818] FDC 0 is a post-1991 82077
[ 16.245419] ata_piix 0000:00:1f.1: version 2.10ac1
[ 16.245443] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 16.245457] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[ 16.245485] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 16.245587] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011820 irq 14
[ 16.249935] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011828 irq 15
[ 16.249977] scsi0 : ata_piix
[ 16.274892] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 4.084000] Time: acpi_pm clocksource has been installed.
[ 4.160000] ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
[ 4.160000] ata1.00: ATA-5: IC25N040ATCS04-0, CA4OA71A, max UDMA/100
[ 4.160000] ata1.00: 78140160 sectors, multi 16: LBA
[ 4.168000] ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
[ 4.168000] ata1.00: configured for UDMA/100
[ 4.168000] scsi1 : ata_piix
[ 4.204000] usb 1-2: configuration #1 chosen from 1 choice
[ 4.224000] usbcore: registered new interface driver hiddev
[ 4.244000] input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /class/input/input2
[ 4.244000] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:1d.0-2
[ 4.244000] usbcore: registered new interface driver usbhid
[ 4.244000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 4.324000] ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 4.984000] ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 4.984000] ata2.01: limiting speed to UDMA7:PIO5
[ 5.644000] ata2.01: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 6.468000] ata2.00: ATAPI, max UDMA/33
[ 6.632000] ata2.00: configured for UDMA/33
[ 6.632000] scsi 0:0:0:0: Direct-Access ATA IC25N040ATCS04-0 CA4O PQ: 0 ANSI: 5
[ 6.632000] scsi 1:0:0:0: CD-ROM QSI DVD/CDRW SBW-161 SX13 PQ: 0 ANSI: 5
[ 6.640000] PCI: Enabling device 0000:02:00.0 (0110 -> 0112)
[ 6.640000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 6.692000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[e8204000-e82047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.692000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
[ 6.692000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9
[ 6.720000] e100: eth0: e100_probe: addr 0xe8205000, irq 9, MAC addr 00:02:3F:B4:24:A9
[ 6.736000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[ 6.736000] sda: Write Protect is off
[ 6.736000] sda: Mode Sense: 00 3a 00 00
[ 6.736000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.736000] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
[ 6.736000] sda: Write Protect is off
[ 6.736000] sda: Mode Sense: 00 3a 00 00
[ 6.736000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.736000] sda: sda1 sda2 < sda5 sda6 >
[ 6.780000] sd 0:0:0:0: Attached scsi disk sda
[ 6.784000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.784000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.788000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 6.788000] Uniform CD-ROM driver Revision: 3.20
[ 6.788000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.036000] Attempting manual resume
[ 7.036000] swsusp: Resume From Partition 8:6
[ 7.036000] PM: Checking swsusp image.
[ 7.036000] PM: Resume from disk failed.
[ 7.076000] kjournald starting. Commit interval 5 seconds
[ 7.076000] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.964000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f2c26000337]
[ 23.700000] NET: Registered protocol family 17
[ 23.952000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 24.016000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 24.156000] iTCO_vendor_support: vendor-support=0
[ 24.156000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 24.156000] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
[ 24.156000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 24.248000] Linux agpgart interface v0.102 (c) Dave Jones
[ 24.264000] intel_rng: FWH not detected
[ 24.324000] agpgart: Detected an Intel i845 Chipset.
[ 24.328000] agpgart: AGP aperture is 64M @ 0xec000000
[ 25.112000] Yenta: CardBus bridge found at 0000:02:04.0 [1025:001e]
[ 25.112000] Yenta O2: res at 0x94/0xD4: 00/ea
[ 25.112000] Yenta O2: enabling read prefetch/write burst
[ 25.140000] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000
[ 25.180000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 25.240000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
[ 25.240000] Socket status: 30000811
[ 25.240000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 25.240000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[ 25.240000] cs: IO port probe 0x4000-0x4fff: clean.
[ 25.240000] pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
[ 25.240000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 25.292000] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 25.292000] wbsd: Copyright(c) Pierre Ossman
[ 25.292000] pnp: Device 00:09 activated.
[ 25.296000] mmc0: W83L51xD id 7112 at 0x248 irq 10 FIFO PnP
[ 25.652000] ACPI: PCI Interrupt 0000:00:1f.5[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 25.652000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 25.876000] pccard: PCMCIA card inserted into slot 0
[ 25.876000] cs: memory probe 0xe8200000-0xe82fffff: excluding 0xe8200000-0xe820ffff
[ 25.896000] pcmcia: registering new device pcmcia0.0
[ 26.044000] cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f
[ 26.044000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 26.048000] cs: IO port probe 0x820-0x8ff: clean.
[ 26.048000] cs: IO port probe 0xc00-0xcf7: clean.
[ 26.048000] cs: IO port probe 0xa00-0xaff: clean.
[ 26.656000] eth1: Atmel at76c50x. Version 0.98. MAC 00:60:b3:77:88:c0
[ 26.712000] intel8x0_measure_ac97_clock: measured 55797 usecs
[ 26.712000] intel8x0: clocking to 48000
[ 26.904000] fuse init (API version 7.8)
[ 27.012000] lp: driver loaded but no devices found
[ 27.076000] Adding 1871500k swap on /dev/disk/by-uuid/3b20fdc2-276b-4697-a7e7-56472e9a3244. Priority:-1 extents:1 across:1871500k
[ 27.248000] EXT3 FS on sda1, internal journal
[ 40.308000] ibm_acpi: ec object not found
[ 40.348000] ACPI: Battery Slot [BAT1] (battery present)
[ 40.368000] No dock devices found.
[ 40.384000] Using specific hotkey driver
[ 40.444000] ACPI: AC Adapter [ACAD] (on-line)
[ 40.520000] input: Power Button (FF) as /class/input/input4
[ 40.524000] ACPI: Power Button (FF) [PWRF]
[ 40.564000] input: Lid Switch as /class/input/input5
[ 40.568000] ACPI: Lid Switch [LID]
[ 40.604000] input: Power Button (CM) as /class/input/input6
[ 40.612000] ACPI: Power Button (CM) [PWRB]
[ 40.648000] input: Sleep Button (CM) as /class/input/input7
[ 40.648000] ACPI: Sleep Button (CM) [SLPB]
[ 40.688000] pcc_acpi: loading...
[ 46.588000] [drm] Initialized drm 1.1.0 20060810
[ 46.604000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 46.608000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 47.264000] ppdev: user-space parallel port driver
[ 47.548000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 47.548000] apm: overridden by ACPI.
[ 49.152000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 49.152000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 49.152000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 49.420000] [drm] Setting GART location based on new memory map
[ 49.420000] [drm] writeback test succeeded in 1 usecs
[ 49.928000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 50.064000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 50.068000] NFSD: starting 90-second grace period
[ 50.896000] NET: Registered protocol family 10
[ 50.896000] lo: Disabled Privacy Extensions
[ 50.896000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 50.896000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 68.892000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 84.056000] eth1: no IPv6 routers presentDat zou misschien betekenen dat hij blijft hangen op de eth1?
