Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Pagina's: [1]   Omlaag

Auteur Topic: NVidia Dual screen  (gelezen 5537 keer)

Offline Supreme

  • Lid
NVidia Dual screen
« Gepost op: 2007/10/28, 18:52:05 »
Kunnen jullie me a.u.b. helpen met mijn xorg.conf, ik ben een tijd aan het debuggen maar ik kom er maar niet uit '-( het laptopscherm werkt, prima maar zodra ik m'n laptop opstart met de externe monitor doet hij het niet, ik kan dan ook weinig doen omdat de laptop dan in een port replicator zit die in een monitor stand zit, waardoor m'n laptopscherm maar een paar centimeter op kan.

Ik heb gewoon een standaard nvidia binary driver met twinview "clone" ingesteld kan iemand mij vertellen wat ik fout heb gedaan in de configuratie:

Code: [Selecteer]
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "Device"
Identifier "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
Driver "nvidia"
Busid "PCI:1:0:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
Option "TwinView" "on"
Option "TwinViewOrientation" "clone"
Screen 0
EndSection

Section "Device"
Identifier "device1"
Driver "nvidia"
Busid "PCI:1:0:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
Option "TwinView" "on"
Option "TwinViewOrientation" "clone"
Screen 1
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
Horizsync 28-72
Vertrefresh 43-60
EndSection

#=====================Externe monitor=========================
Section "Monitor" #
Identifier "monitor1"
Vendorname "Dell"
Modelname "Dell 1907FPV(Digital)"
Horizsync 30.0-81.0
Vertrefresh 56.0-76.0
Option "DPMS"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Gamma 1.0
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
Defaultdepth 24
SubSection "Display"
Modes "1280x1024"
EndSubSection
EndSection

#=====================Externe monitor==============================

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
Monitor "Generic Monitor"
Defaultdepth 24
SubSection "Display"
Modes "1440x900"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice     "stylus" "SendCoreEvents"
# InputDevice     "cursor" "SendCoreEvents"
# InputDevice     "eraser" "SendCoreEvents"
Inputdevice "Synaptics Touchpad"
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSectionPs. de monitor werkt wel gewoon bij het booten alleen zodra de desktop wordt geladen en je hoort het ubuntu opstartgeluid gaat de monitor standby dus het ligt echt aan de configuratie van xorg.conf

Ps.2 Vandaag werkte de configuratie voordat ik eraan had gezeten alleen de resolutie was toen 1024x748 terwijl m'n externe monitor 1280x1024 aan kan.(het laptop display was ook de verkeerde resolutie, maar dat heeft wel gewerkt)



PLEASE kan iemand mij helpen??


Edit:

Hier de failover configuratie:
Code: [Selecteer]
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
#   sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection

Section "Module"
Load "glx"
Load "v4l"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection


Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "Device"
Identifier "Failsafe Device"
Boardname "vesa"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 0
EndSection

Section "Monitor"
Identifier "Failsafe Monitor"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1440x900"
Horizsync 31.5-56.0
Vertrefresh 56.0 - 65.0
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1280x768@60" 80.14 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
  modeline  "1280x720@60" 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync
  modeline  "1280x800@60" 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
  modeline  "1440x900@60" 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync
Gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Failsafe Device"
Monitor "Failsafe Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Modes "1440x900@60" "1280x800@60" "1280x720@60" "1280x768@60" "800x600@60" "800x600@56"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "Synaptics Touchpad"
EndSection
Section "device" #
Identifier "device1"
Boardname "vesa"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 1
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
SubSection "Display"
Depth 24
Modes "1280x1024@75" "1280x960@60" "1152x864@75" "1280x1024@60" "1024x768@60" "1280x960@75" "1024x768@70" "1400x1050@60" "1024x768@75" "1600x1200@65" "832x624@75" "1600x1200@60" "800x600@60" "800x600@75" "800x600@72" "800x600@56" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "monitor" #
Identifier "monitor1"
Vendorname "Dell"
Modelname "Dell 1907FP (Digital)"
Horizsync 30.0-81.0
Vertrefresh 56.0-76.0
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection
Meld dit bericht aan de moderator   Gelogd

Offline Supreme

  • Lid
NVidia Dual screen
« Reactie #1 Gepost op: 2007/11/04, 21:40:39 »
Waarom wordt er nou niet gereageerd??? is het te moeilijk ofzo? :P
Meld dit bericht aan de moderator   Gelogd

Offline laacque

  • Lid
NVidia Dual screen
« Reactie #2 Gepost op: 2007/11/04, 21:59:51 »
Voor mij is het in ieder geval te moeilijk, maar soms moet je even wachten voordat iemand met verstand van zaken je post ziet. We zijn allemaal vrijwilligers en kunnen ook niet alles gisteren opgelost hebben.
Mocht je post na een dag of twee nog niet beantwoord zijn, dan breng je hem maar weer onder de aandacht. Okay?
Meld dit bericht aan de moderator   Gelogd
Als je in de breedte groeit,||groei je dan ook in de diepte?

Offline SWAT

  • Administrator
NVidia Dual screen
« Reactie #3 Gepost op: 2007/11/04, 22:19:39 »
Citaat van: Supreme
Waarom wordt er nou niet gereageerd??? is het te moeilijk ofzo? :P
Met zulke 'grappen' motiveer niet echt mensen om je te helpen.

Een aantal pagina's op de wiki die onder andere hierover gaan (altijd handige informatie):
https://help.ubuntu.com/community/NvidiaMultiMonitors
https://help.ubuntu.com/community/XineramaHowTo
Meld dit bericht aan de moderator   Gelogd

Offline Mario

  • Lid
NVidia Dual screen
« Reactie #4 Gepost op: 2007/11/04, 22:28:06 »
Probeer dit eens
Maar dit is nt gemakkelijk te doen voor een andere PC
gemakkelijkste manier om aan te passen bij fouten is om in recoverymode te starten
startx om grafische omgeving op te starten indien geen opstart worden fouten gemeld
Xorg.conf dan aanpassen via commmand-line
Code: [Selecteer]
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "us"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"    "/dev/input/mice"
    Option        "Protocol"    "ImPS/2"
    Option        "ZAxisMapping"    "4 5"
    Option        "Emulate3Buttons"    "true"
EndSection

Section "InputDevice"
    Identifier    "Synaptics Touchpad"
    Driver        "synaptics"
    Option        "SendCoreEvents"    "true"
    Option        "Device"    "/dev/psaux"
    Option        "Protocol"    "auto-dev"
    Option        "HorizEdgeScroll"    "0"
EndSection

Section "Device "
    Identifier    "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]Mon0"
    Driver        "nvidia"
    Busid         "PCI:1:0:0"
    Option        "AddARGBVisuals"    "True"
    Option        "AddARGBGLXVisuals"    "True"
    Option        "NoLogo"    "True"
EndSection

Section "Device"
    Identifier    "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]Mon1"
    Driver        "nvidia"
    Busid         "PCI:1:0:0"
    Option        "AddARGBVisuals"    "True"
    Option        "AddARGBGLXVisuals"    "True"
    Option        "NoLogo"    "True"
EndSection

Section "Monitor"
    Identifier    "Monitor0"
    Option        "DPMS"
    Horizsync    28-72
    Vertrefresh    43-60
EndSection

#=====================Externe monitor=========================
Section "Monitor" #
    Identifier    "monitor1"
    Vendorname    "Dell"
    Modelname    "Dell 1907FPV(Digital)"
    Horizsync    30.0-81.0
    Vertrefresh    56.0-76.0
    Option        "DPMS"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    Gamma    1.0
EndSection

Section "Screen"
    Identifier    "screen 0"
    Device        "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]Mon0"
    Monitor        "monitor0"
    Defaultdepth    24
    SubSection "Display"
        Modes        "1280x1024"
    EndSubSection
EndSection

#=====================Externe monitor==============================

Section "Screen"
    Identifier    "screen 1"
    Device        "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]Mon1"
    Monitor        "Monitor1"
    Defaultdepth    24
    Option         "TwinView" "1"
    SubSection "Display"
        Modes        "1440x900"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    screen 0 "screen 1" 0 0
    Inputdevice    "Generic Keyboard"
    Inputdevice    "Configured Mouse"
   
    # Uncomment if you have a wacom tablet
    #    InputDevice     "stylus"    "SendCoreEvents"
    #    InputDevice     "cursor"    "SendCoreEvents"
    #    InputDevice     "eraser"    "SendCoreEvents"
    Inputdevice    "Synaptics Touchpad"
EndSection
Section "Module"
    Load        "glx"
    Load        "v4l"
EndSection
Meld dit bericht aan de moderator   Gelogd
PC:Intel dual core 6600 2.4Ghz-Abit AB9-nvidia GeForce 9600 GT-
dual-boot : Debian Lenny - Windows 7
Alle beschrijvingen van de werkelijkheid zijn tijdelijke veronderstellingen

Offline Supreme

  • Lid
NVidia Dual screen
« Reactie #5 Gepost op: 2007/11/05, 11:27:35 »
Citaat van: SWAT
Citaat van: Supreme
Waarom wordt er nou niet gereageerd??? is het te moeilijk ofzo? :P
Met zulke 'grappen' motiveer niet echt mensen om je te helpen.
Sorry, allemaal maar was een hele tijd niet gereageerd dus werd een beetje wanhopig....:D

@mario ik ga het vanmiddag proberen, Thx

Ik laat het jullie weten of ik er uit kom!
Meld dit bericht aan de moderator   Gelogd

Offline Koen Bokern

  • Lid
NVidia Dual screen
« Reactie #6 Gepost op: 2007/11/05, 12:30:09 »
Maak altijd backups van Xorg.conf he

sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf-backup

Als je dat al hebt gedaan, dan heb ik niks gezegd.
Meld dit bericht aan de moderator   Gelogd

Offline Supreme

  • Lid
NVidia Dual screen
« Reactie #7 Gepost op: 2007/11/11, 12:27:26 »
@mario ik heb vandaag de instelling getest, maar ik kreeg het helaas niet werkend.....

Kan iemand me naar meer documentatie wijzen over xorg.conf ? De meeste configuraties die ik vind als ik google zijn of alleen met het uitbreiden van de schermen of zijn op oudere manieren die nu niet meer werken. :S
Meld dit bericht aan de moderator   Gelogd

Offline Supreme

  • Lid
NVidia Dual screen
« Reactie #8 Gepost op: 2007/11/15, 22:22:22 »
Ik ben er helaas nog steeds niet uit hoe ik het werkend kan krijgen zelfs op het internationale ubuntu forum krijg ik geen reactie :( kan iemand mij helpen met dit probleem?

Ik heb inmiddels de volgende configuratie uitgeprobeerd:

Code: [Selecteer]
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Wed Sep 12 14:29:35 PDT 2007

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

    # Uncomment if you have a wacom tablet
    #    InputDevice     "stylus"    "SendCoreEvents"
    #    InputDevice     "cursor"    "SendCoreEvents"
    #    InputDevice     "eraser"    "SendCoreEvents"
    Identifier     "Default Layout"
    Screen      0  "screen 0" 0 0
    Screen      1  "screen 1" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "glx"
    Load           "v4l"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "us"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ImPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
    Identifier     "Synaptics Touchpad"
    Driver         "synaptics"
    Option         "SendCoreEvents" "true"
    Option         "Device" "/dev/psaux"
    Option         "Protocol" "auto-dev"
    Option         "HorizEdgeScroll" "0"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName   "Dell"
    ModelName   "Dell Laptop scherm"
    HorizSync       28.0 - 72.0
    VertRefresh     43.0 - 60.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Dell"
    ModelName      "Dell 1907FPV(Digital)"
    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Device"
    Identifier     "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
    Driver         "nvidia"
    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"
    Option         "NoLogo" "True"
    BusID          "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier     "screen 0"
    Device         "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Modes      "1400x900","1280x1024","1024x768","800x600" #extra resoluties voor debug
    EndSubSection
EndSection

Section "Screen"
    Identifier     "screen 1"
    Device         "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
    Monitor        "Monitor1"
    DefaultDepth    24
    #Option         "TwinView" "1"
    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"
    #Option         "NoLogo" "True"
    SubSection     "Display"
        Depth       24
        Modes      "1400x900","1280x1024","1024x768","800x600" #extra resoluties voor debug
    EndSubSection
EndSection
Meld dit bericht aan de moderator   Gelogd
Pagina's: [1]   Omhoog