Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Hellanzb  (gelezen 6785 keer)

Tissue

  • Gast
Hellanzb
« Gepost op: 2007/11/22, 11:53:59 »
hallo people,


ik heb nu voor een maandje ubuntu draaien nadat ik jarenlang op Windows heb gedraaid maar nu de nieuwe versie ervan uit is (waar ik van walg) ben ik gaan zoeken naar een alternatief. Eerder heb ik ook al een keer gekeken naar Ubuntu maar toen vond ik het nog niet zo doorontwikkeld als dat het nu is, en heb daarom ook de overstap gemaakt. Na alle tevredenheid.

zo dit was even over hoe ik bij ubuntu ben gekomen. Nu komt het probleem:

Het volgende doet zich voort wanneer ik hellanzb opstart dan draait het gewoon, alleen word er niks gedownload. Ik zie nergens geen foutmeldingen o.i.d. alles lijkt te werken. Ik heb Hellanzb zo ingesteld dat hij de server van XS4all gebruikt (newszilla.xs4all.nl) daarna heb ik mijn gebruikersnaam en wachtwoord in de hellanzb.conf file geplaatst.
Dit bood echter geen oplossing. heb al van alles geprobeerd maar niks werkte.

Toen dacht ik laat ik maar eens gaan kijken of ik uberhaubt wel iets kan downloaden met een programma'tje en heb toen een client van DC++ geïnstalleerd. Eerst werkte deze ook niet maar na een aanpassing in de instellingen (passive firewall aangevinkt) lijkt deze het nu wel te doen.

Kan het wezen dat ik iets moet aanpassen in de hellanzb.conf file zodat dit ook ingesteld kan worden (passive firewall = true o.i.d.??) of is er een ander probleem? graag jullie hulp want heb overal gezocht maar kon nergens een bevredigend antwoord vinden.

alvast bedankt!!




let the ubuntu be with you

Donderbokje

  • Gast
Hellanzb
« Reactie #1 Gepost op: 2007/11/22, 13:51:35 »
Je plaatst je NZB bestand wel in de goede map? nzb/daemon.queue
Ik kan me nl niet voorstellen dat je firewall in de weg zit.

Tissue

  • Gast
Hellanzb
« Reactie #2 Gepost op: 2007/11/22, 13:56:18 »
ja ik zie ook dat hij hem oppakt maar er gebeurd daarna niks meer er is geen download activiteit.

Donderbokje

  • Gast
Hellanzb
« Reactie #3 Gepost op: 2007/11/22, 14:18:28 »
Citaat van: Tissue
ja ik zie ook dat hij hem oppakt maar er gebeurd daarna niks meer er is geen download activiteit.
Wat bedoel je met oppakken?
Je ziet dan zoiets als dit?

hellanzb v0.13 (config = /etc/hellanzb.conf)
(xs4all) Opening 4 connections...
hellanzb - Now monitoring queue...
Zolang er niks in de queue staat blijft dit bij mij zichtbaar.

Zodra ik een nzb in de queue zet verandert dit in het volgende;

hellanzb v0.13 (config = /etc/hellanzb.conf)
(xs4all) Opening 4 connections...
hellanzb - Now monitoring queue...
Found new nzb: RedHat.Enterprise.Linux.5.Update.1
Parsing: RedHat.Enterprise.Linux.5.Update.1.nzb...
Parsed: 69 files (12332 posts), 3033.5MB
Queued: 3033.5MB
[1] hellanzb-tmp-RedHat.Enterprise.Linux.5.Update.1.file0009 -  0% @ 484.0KB/s
[2] hellanzb-tmp-RedHat.Enterprise.Linux.5.Update.1.file0010 -  0% @ 408.0KB/s
[3] hellanzb-tmp-RedHat.Enterprise.Linux.5.Update.1.file0011 -  0% @ 418.0KB/s
[4] hellanzb-tmp-RedHat.Enterprise.Linux.5.Update.1.file0012 -  0% @ 0.0KB/s
[Total] 1310.0KB/s, 3031 MB queued, ETA: 01:06:49

Tissue

  • Gast
Hellanzb
« Reactie #4 Gepost op: 2007/11/22, 14:31:39 »
Citaat van: Donderbokje
Citaat van: Tissue
ja ik zie ook dat hij hem oppakt maar er gebeurd daarna niks meer er is geen download activiteit.
Wat bedoel je met oppakken?
Je ziet dan zoiets als dit?

hellanzb v0.13 (config = /etc/hellanzb.conf)
(xs4all) Opening 4 connections...
hellanzb - Now monitoring queue...
Zolang er niks in de queue staat blijft dit bij mij zichtbaar.

Zodra ik een nzb in de queue zet verandert dit in het volgende;

hellanzb v0.13 (config = /etc/hellanzb.conf)
(xs4all) Opening 4 connections...
hellanzb - Now monitoring queue...
Found new nzb: RedHat.Enterprise.Linux.5.Update.1
Parsing: RedHat.Enterprise.Linux.5.Update.1.nzb...
Parsed: 69 files (12332 posts), 3033.5MB
Queued: 3033.5MB
[1] hellanzb-tmp-RedHat.Enterprise.Linux.5.Update.1.file0009 -  0% @ 484.0KB/s
[2] hellanzb-tmp-RedHat.Enterprise.Linux.5.Update.1.file0010 -  0% @ 408.0KB/s
[3] hellanzb-tmp-RedHat.Enterprise.Linux.5.Update.1.file0011 -  0% @ 418.0KB/s
[4] hellanzb-tmp-RedHat.Enterprise.Linux.5.Update.1.file0012 -  0% @ 0.0KB/s
[Total] 1310.0KB/s, 3031 MB queued, ETA: 01:06:49
Dit is wat ik zie

hellanzb v0.13 (config = /etc/hellanzb.conf)
(xs4all) Opening 4 connections...
hellanzb - Now monitoring queue...
Found new nzb: RedHat.Enterprise.Linux.5.Update.1
Parsing: RedHat.Enterprise.Linux.5.Update.1.nzb...
Parsed: 69 files (12332 posts), 3033.5MB
Queued: 3033.5MB
[1]
[2]
[3]
[4]
[Total] 1310.0KB/s, 3031 MB queued, ETA: 01:06:49
dus vandaar dat ik zei dat hij hem wel oppakt maar geen download activiteit weer geeft.


heb die van jou even aangepast, maar denk wel dat je het zo begrijpt.

Donderbokje

  • Gast
Hellanzb
« Reactie #5 Gepost op: 2007/11/22, 14:36:59 »
Post anders je hellanzb.conf eens als je wilt. (niet vergeten je username en password weg te halen ;) )

Tissue

  • Gast
Hellanzb
« Reactie #6 Gepost op: 2007/11/22, 14:44:25 »
als ik vanavond tijd heb (ben nou op het werk en daar werken ze nog niet met ubuntu :P ) zal ik hem posten.

Tissue

  • Gast
Hellanzb
« Reactie #7 Gepost op: 2007/11/22, 23:16:43 »
zo ziet mijn hellanzb.conf eruit:

#
# hellanzb.conf - sample hellanzb configuration file
#
# To quickly get started, change the default defineServer() call and the
# Hellanzb.PREFIX_DIR directory
#
# This is actually interpreted python code: strings must be surrounded by
# quotes, numbers and the 'None' keyword should not
#
# $Id: hellanzb.conf.sample 1057 2007-03-27 04:13:53Z pjenvey $

# Log output to this file, set to None (no single quotes) for no logging
Hellanzb.LOG_FILE = '/var/tmp/hellanzb.log'

# Uncomment this line to log DEBUG messages to the specified file
#Hellanzb.DEBUG_MODE = '/var/tmp/hellanzb-debug.log'

# Automatically roll over both log files when they reach LOG_FILE_MAX_BYTES
# size
Hellanzb.LOG_FILE_MAX_BYTES = 0

# Save LOG_FILE_BACKUP_COUNT of those rolled over log files
Hellanzb.LOG_FILE_BACKUP_COUNT = 0


# Define server connections. Servers can have multiple hosts, hellanzb will
# persist the number of connections to each specified server. There may be
# multiple defineServer lines.

# Set both the username and password to 'None' (without the quotes) if your
# usenet server does not require authorization
defineServer(id = 'News',
             hosts = [ 'news.xs4all.nl:119' ],
             #hosts = [ 'news.xs4all.nl', 'news.xs4all.nl:8000' ],


             username = 'gebruikersnaam',
             password = 'wachtwoord',
             
    #username = None,           # no auth
             #password = None,

             connections = 1,
             antiIdle = 0,        # 4.5 * 60 4 minutes, 30 seconds, 0 to disable
             #bindTo = '204.31.33.7',    # connect FROM this ip address
             #enabled = False,           # disable this server
             #skipGroupCmd = False,      # skip sending nntp GROUP commands
             #fillserver = 0,            # defaults to 0 (a main server).
                                         # fillservers must have values > 0
                                         # (priority)
             ssl = False
             )

# Uncomment this line to limit all server connections to the specified KB/s
# bandwidth
#Hellanzb.MAX_RATE = 150 # limit to 150kB/s


# Important locations
Hellanzb.PREFIX_DIR = '/home/ronald/download/download'

# Where to put queued .nzb files
Hellanzb.QUEUE_DIR = Hellanzb.PREFIX_DIR + 'nzb/daemon.queue/'

# Where the fully processed archives go
Hellanzb.DEST_DIR = Hellanzb.PREFIX_DIR + 'usenet/'

# The .nzb currently being downloaded is stored here
Hellanzb.CURRENT_DIR = Hellanzb.PREFIX_DIR + 'nzb/daemon.current/'

# The archive currently being downloaded is stored here
Hellanzb.WORKING_DIR = Hellanzb.PREFIX_DIR + 'nzb/daemon.working/'

# Archives interrupted in the middle of downloading are stored here temporarily
Hellanzb.POSTPONED_DIR = Hellanzb.PREFIX_DIR + 'nzb/daemon.postponed/'

# Archives currently being processed. May contains archive directories, or
# symbolic links to archive directories
Hellanzb.PROCESSING_DIR = Hellanzb.PREFIX_DIR + 'nzb/daemon.processing/'

# Temp storage
Hellanzb.TEMP_DIR = Hellanzb.PREFIX_DIR + 'nzb/daemon.temp/'

# Filename to store hellanzb state in between CTRL-Cs. The state (includes the
# order of the queue, and smart par recovery information) is intermittently
# written out as XML to this file
Hellanzb.STATE_XML_FILE = Hellanzb.PREFIX_DIR + 'nzb/hellanzbState.xml'


# _Sub directory within the nzb archive dir_ to move processed files to
Hellanzb.PROCESSED_SUBDIR = 'processed'

# Remove the PROCESSED_SUBDIR if the archive was successfully post processed.
# Warning: The normal Hellanzb.LOG_FILE should be enabled with this option --
# for a record of what hellanzb deletes
Hellanzb.DELETE_PROCESSED = True


# Maximum amount of memory used to cache encoded Article data segments.
# hellanzb will write article data to disk when this cache is exceeded
# Available settings:
# -1: Unlimited size
#  0: Disable cache (only cache to disk)
# >0: Limit cache to this size, in bytes, KB, MB, e.g.:
#     1024 '1024KB' '100MB' '1GB'
#Hellanzb.CACHE_LIMIT = 0


# Save archives into a sub directory of DEST_DIR named after their newzbin.com
# category (when queued using the enqueuenewzbin XMLRPC call); e.g. Apps,
# Movies, Music
Hellanzb.CATEGORIZE_DEST = True

# Disable SMART_PAR (download all PAR files)
#Hellanzb.SMART_PAR = False

# Supply a path to the (un)rar command
#Hellanzb.UNRAR_CMD = None

# Supply a path to the par2 command
#Hellanzb.PAR2_CMD = None

# Skip unraring during post processing
#Hellanzb.SKIP_UNRAR = False

# Supply a path to the optional macbinconv command (for converting MacBinary
# files)
#Hellanzb.MACBINCONV_CMD = None

# hellanzb inherits the umask from the current user's environment (unless it's
# running in daemon mode). The umask can be forced with this option
#Hellanzb.UMASK = 0022


# Supported music types (case insensitive) and optionally their decompression
# executables
# and the file type that executable will decompress to (case insensitive). The
# exes must be in the PATH.
#
# will be replaced with the name of music file
# optional is with the specified extension
#
# None means these files don't need to be decompressed
defineMusicType('wav', None, None)
defineMusicType('mp3', None, None)
#defineMusicType('ape', 'mac -d', 'wav')
#defineMusicType('flac', 'flac -d -- ', 'wav')
#defineMusicType('shn', 'shorten -x < > ', 'wav')

# Max files we should decompress at the same time
Hellanzb.MAX_DECOMPRESSION_THREADS = 2


# Enable Mac OS X Growl notifications
Hellanzb.GROWL_NOTIFY = False

# The growl notification server, in the format 'hostname'
Hellanzb.GROWL_SERVER = 'IP'

# The growl password
Hellanzb.GROWL_PASSWORD = 'password'


# Enable libNotify Daemon notifications
Hellanzb.LIBNOTIFY_NOTIFY = False


# Disable ANSI color codes in the main screen (preserves the in place scroller)
#Hellanzb.DISABLE_COLORS = False

# Disable ALL ANSI color codes in the main screen (for terminals that don't
# support ANY ANSI codes
#Hellanzb.DISABLE_ANSI = False


# Hostname for the XMLRPC client to connect to. By default, localhost
Hellanzb.XMLRPC_SERVER = 'localhost'

# Port number the XML RPC server will listen on, and the client will connect to.
# Set to 'None' (without the quotes!) for no XML RPC server
Hellanzb.XMLRPC_PORT = 8760

# Password for the XML RPC server. You might probably never use this, but the
# command line XML RPC calls do -- it should definitely be changed from its
# default value. The XML RPC username is hardcoded as 'hellanzb' -- E.g. URL:
# http://hellanzb:changeme@localhost:8760
Hellanzb.XMLRPC_PASSWORD = 'changeme'


# Username/Password to http://www.newzbin.com for automatic NZB downloading
Hellanzb.NEWZBIN_USERNAME = None
Hellanzb.NEWZBIN_PASSWORD = None


# If any of the following file types are missing from the archive and cannot be
# repaired, continue processing because they're unimportant (case insensitive)
Hellanzb.NOT_REQUIRED_FILE_TYPES = [ 'log', 'm3u', 'nfo', 'nzb', 'sfv', 'txt' ]

# Don't get rid of (move into the PROCESSED dir) the following file types when
# finished post processing (case insensitive)
#Hellanzb.KEEP_FILE_TYPES = [ 'log', 'm3u', 'nfo', 'nzb', 'sfv', 'txt' ]
Hellanzb.KEEP_FILE_TYPES = [ 'nfo', 'txt' ]


# List of alternative file extensions matched as NZB files in the QUEUE_DIR.
# The 'nzb' file extension is always matched
#Hellanzb.OTHER_NZB_FILE_TYPES = [ 'xml' ]

# Support extracting NZBs from ZIP files with this suffix (case insensitive) in
# QUEUE_DIR. Defaults to '.nzb.zip'. Set to False to disable.
#Hellanzb.NZB_ZIPS = '.nzb.zip'

# Support extracting NZBs from GZIP files with this suffix (case insensitive)
# in QUEUE_DIR. Defaults to '.nzb.gz'. Set to False to disable.
#Hellanzb.NZB_GZIPS = '.nzb.gz'

# Delay enqueueing new, recently modified NZB files added to the QUEUE_DIR until
# this many seconds have passed since the NZB's last modification time (defaults
# to 10 seconds)
#Hellanzb.NZBQUEUE_MDELAY = 10

# Optional external handler script. hellanzb will run this script after post
# processing an archive, with the following arguments:
#
# handler_script type archiveName destDir elapsedTime parMessage
#
# type: post processing result, either 'SUCCESS' or 'ERROR'
# archiveName: name of the archive, e.g. 'Usenet_Post5'
# destDir: where the archive ended up, e.g. '/ext2/usenet/Usenet_Post5'
# elapsedTime: a pretty string showing how long post processing took, e.g.
#              '10m 37s'
# parMessage: optional post processing message. e.g. '(No Pars)'
#Hellanzb.EXTERNAL_HANDLER_SCRIPT = '~/bin/post_hellanzb.sh'
nu heb ik het nog een keer geprobeerd maar nu zegt hij iedere keer dat het artikel niet bestaat (is missing)
Hopelijke kun je hier wat mee.

Offline testcees

  • Documentatieteam
    • testcees
    • www.testcees.nl
Hellanzb
« Reactie #8 Gepost op: 2007/11/22, 23:26:00 »
Citaat van: Tissue
# Log output to this file, set to None (no single quotes) for no logging
Hellanzb.LOG_FILE = '/var/tmp/hellanzb.log'
Open deur: geeft deze log extra informatie?
Citaat van: Tissue
hosts = [ 'news.xs4all.nl:119' ],
Waarom niet:
hosts = [ 'newszilla.xs4all.nl:119' ],
Klik links bovenin op Documentatie

Tissue

  • Gast
Hellanzb
« Reactie #9 Gepost op: 2007/11/22, 23:54:35 »
ja sorry had de instelling nog niet terug gezet ga ik nu proberen.


edit: bedoel dat ik eerst newszilla had staan en deze weer aangepast heb in news.xs4all.nl

breukkie

  • Gast
Hellanzb
« Reactie #10 Gepost op: 2007/11/23, 13:28:23 »
# Important locations
Hellanzb.PREFIX_DIR = '/home/ronald/download/download'   ik mis in je config  de /  achter download

Hellanzb.PREFIX_DIR = '/home/ronald/download/download/'  zet deze ( / ) er eens achter en kijk dan of het werkt.

Koei

  • Gast
Hellanzb
« Reactie #11 Gepost op: 2007/11/24, 18:56:31 »
Kijk ook even of je hellanzb niet op een andere computer hebt draaien. Hij opent al z'n verbindingen van tevoren. Als je 'm dus al hebt draaien kan hij geen verbindingen meer openen omdat newszilla er maar 3 toelaat.

Tissue

  • Gast
Hellanzb
« Reactie #12 Gepost op: 2007/11/25, 20:39:40 »
@breukkie dat had ik later ook in de gaten maar hij maakte de mappen voor mij automatisch aan.

@koei nee dat heb ik niet heb alleen op mijn laptop hellanzb draaien.


ps. trouwens een ander vraagje even tussendoor hoe kan ik Root permissies krijgen op mijn account? zodat ik niet iedere keer sudo hoeft te gebruiken als ik bv. wat wil installeren??

Hellanzb
« Reactie #13 Gepost op: 2007/11/25, 20:58:15 »
Met Konsole (Terminalvenster die je krijgt bij KDE (Je kan hem natuurlijk ook bij GNOME installeren) kan je voor in de terminal een root sessie ofzo starten, dan moet je bij het openen van je terminal (Konsole dus) je root wachtwoord intypen en voor de rest in de terminal niet, maar dus wel elke keer als je iets wil installeren

Maar een root account echt gebruiken (dus ermee inloggen enzo) zoals jij beschrijft is een heel slecht idee omdat bijvoorbeeld je pc dan WEL vatbaar is voor virussen enzo al gebruik je linux, niet dat ik een expert ben maar raad dat ik (netzoals de meeste linuxgebruikers) zeker af
PC: Processor - AMD Athlon II X4 640 (quad core, 3.0GHz), 4GB DDR2 RAM 800MHz, Videokaart: ATI Sapphire HD4850 met 512MB geheugen, 500gb 7200RPM HDD, Ubuntu 12.04 LTS

Wat doe je als je vraag is opgelost?

breukkie

  • Gast
Hellanzb
« Reactie #14 Gepost op: 2007/11/26, 10:15:47 »
Ik heb mijn hellanzb via mixel.nl geinstalleerd en dus niet via synaptic.
Als ik mijn config bekijk staat er standaard wel /'  achter de map.