nog enkele 7.10 probleempjes.

[Tom4]

Paar dagen geleden Ubuntu 7.10 geisntalleerd met Xubuntu-desktop .Weer een prachtige versie proficiat canoninal en vrijwilligers!

maar zit met 3 kleine probleempjes :

-In tekst-flash-plugins word de tekst massaal groot weergegeven waardoor dit niet leesbaar is, dit probleem heb ik niet in Feisty.

-Youtube videos en dergelijke spelen slecht af. Scherm laad traag, de knoppen in de afspeelbalk lopen over mekaar en je ziet amper beeld terwijl het geluid dan wel weer goed werkt. Ik heb de restricted areas nochtans geinstalleerd.

-tijdens het booten en/of verschijnen inlogscherm springt men scherm voor paar seconden in standby en springt darnaa weer aan alsof er niets gebeurt is, zou dit toch wel opgelost willen krijgen (ivm de eerste indruk als ik iemand ubuntu wil laten zien/kennismaken)

dankje voor de hulp.

[quick30]

Je doet het voorkomen alsof er van alles mis gaat. Dan lijkt het me een goed idee om met het commando dmesg eens te kijken wat er aan foutmeldingen staat in de systeem log.

2 van de 3 hebben met browsen te maken (denk ik). Wellicht een idee om te kijken of het met een andere browser dan die je nu gebruikt wel goed gaat.

Even kijken of er updates zijn voor jouw systeem kan ook nooit kwaad. Mogelijk dat er meerdere mensen zijn met dezelfde problemen en dat ze opgelost zijn...

suc6

[kurt1]

Met geen van allen problemen, is het dan probleem van ubuntu?

[Tom4]

Je doet het voorkomen alsof er van alles mis gaat. Dan lijkt het me een goed idee om met het commando dmesg eens te kijken wat er aan foutmeldingen staat in de systeem log.

2 van de 3 hebben met browsen te maken (denk ik). Wellicht een idee om te kijken of het met een andere browser dan die je nu gebruikt wel goed gaat.

Even kijken of er updates zijn voor jouw systeem kan ook nooit kwaad. Mogelijk dat er meerdere mensen zijn met dezelfde problemen en dat ze opgelost zijn...

suc6

Ik update altijd van zodra er updates beschikbaar zijn, hij is dus up-to-date.
en aan het browsen ligt het ook niet..zelfde problemen met epiphany.

dmesg code :

Code: [Selecteer]

tom@Scenic:~$ dmesg
[    0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000013ef0000 (usable)
[    0.000000]  BIOS-e820: 0000000013ef0000 - 0000000013eff000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000013eff000 - 0000000013f00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000013f00000 - 0000000014000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 318MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 81648) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->    81648
[    0.000000]   HighMem     81648 ->    81648
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->    81648
[    0.000000] On node 0 totalpages: 81648
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 605 pages used for memmap
[    0.000000]   Normal zone: 76947 pages, LIFO batch:15
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xC00F6DA0 checksum 0
[    0.000000] ACPI: RSDP 000F6DA0, 0014 (r0 PTLTD )
[    0.000000] ACPI: RSDT 13EFC1E5, 002C (r1 PTLTD    RSDT    6040000  LTP        0)
[    0.000000] ACPI: FACP 13EFC211, 0074 (r1 FSC    D1214/15  6040000         F4240)
[    0.000000] ACPI: DSDT 13EFC285, 2D53 (r1 FSC    D1214/15  6040000 MSFT  100000C)
[    0.000000] ACPI: FACS 13EFFFC0, 0040
[    0.000000] ACPI: BOOT 13EFEFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
[    0.000000] ACPI: PM-Timer IO Port: 0xf008
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 14000000:ebb80000)
[    0.000000] Built 1 zonelists.  Total pages: 81011
[    0.000000] Kernel command line: root=UUID=88315880-8855-43d7-b855-a88cd1ae5747 ro quiet splash locale=nl_NL
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] mapped APIC to ffffd000 (0128d000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 889.750 MHz processor.
[   17.673727] Console: colour VGA+ 80x25
[   17.674988] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   17.677002] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   17.711160] Memory: 312076k/326592k available (2015k kernel code, 13888k reserved, 916k data, 364k init, 0k highmem)
[   17.711185] virtual kernel memory layout:
[   17.711188]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   17.711192]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   17.711195]     vmalloc : 0xd4800000 - 0xff7fe000   ( 687 MB)
[   17.711198]     lowmem  : 0xc0000000 - 0xd3ef0000   ( 318 MB)
[   17.711202]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   17.711205]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
[   17.711208]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
[   17.711216] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   17.711312] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   17.791276] Calibrating delay using timer specific routine.. 1780.77 BogoMIPS (lpj=3561548)
[   17.791345] Security Framework v1.0.0 initialized
[   17.791364] SELinux:  Disabled at boot.
[   17.791402] Mount-cache hash table entries: 512
[   17.791731] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[   17.791764] CPU: L1 I cache: 16K, L1 D cache: 16K
[   17.791771] CPU: L2 cache: 128K
[   17.791779] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[   17.791808] Compat vDSO mapped to ffffe000.
[   17.791851] Checking 'hlt' instruction... OK.
[   17.807498] SMP alternatives: switching to UP code
[   17.807890] Freeing SMP alternatives: 11k freed
[   17.808602] Early unpacking initramfs... done
[   18.619250] ACPI: Core revision 20070126
[   18.619497] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   18.622407] ACPI: setting ELCR to 0200 (from 0e20)
[   18.627014] CPU0: Intel Celeron (Coppermine) stepping 0a
[   18.627031] SMP motherboard not detected.
[   18.627038] Local APIC not detected. Using dummy APIC emulation.
[   18.627156] Brought up 1 CPUs
[   18.627533] Booting paravirtualized kernel on bare hardware
[   18.627680] Time: 22:45:50  Date: 11/08/107
[   18.627766] NET: Registered protocol family 16
[   18.628130] EISA bus registered
[   18.628168] ACPI: bus type pci registered
[   18.628745] PCI: PCI BIOS revision 2.10 entry at 0xfd97e, last bus=1
[   18.628751] PCI: Using configuration type 1
[   18.628756] Setting up standard PCI resources
[   18.636854] ACPI: EC: Look up EC in DSDT
[   18.640994] ACPI: Interpreter enabled
[   18.641009] ACPI: (supports S0 S1 S3 S4 S5)
[   18.641055] ACPI: Using PIC for interrupt routing
[   18.655214] ACPI: Device [ECP] status [00000008]: functional but not present; setting present
[   18.657343] ACPI: Device [GAME] status [00000008]: functional but not present; setting present
[   18.657919] ACPI: Device [MIDI] status [00000008]: functional but not present; setting present
[   18.658981] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   18.659013] PCI: Probing PCI hardware (bus 00)
[   18.659423] PCI quirk: region f000-f07f claimed by ICH4 ACPI/GPIO/TCO
[   18.659433] PCI quirk: region f180-f1bf claimed by ICH4 GPIO
[   18.659912] PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
[   18.660004] PCI: Transparent bridge - 0000:00:1e.0
[   18.660055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   18.660500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
[   18.665077] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[   18.665316] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[   18.665510] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   18.665733] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[   18.665955] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[   18.666150] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   18.666347] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   18.666679] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   18.667061] Linux Plug and Play Support v0.97 (c) Adam Belay
[   18.667097] pnp: PnP ACPI init
[   18.667144] ACPI: bus type pnp registered
[   18.673896] pnp: PnP ACPI: found 13 devices
[   18.673910] ACPI: ACPI bus type pnp unregistered
[   18.673922] PnPBIOS: Disabled by ACPI PNP
[   18.674134] PCI: Using ACPI for IRQ routing
[   18.674144] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   18.676765] NET: Registered protocol family 8
[   18.676771] NET: Registered protocol family 20
[   18.678566] Time: tsc clocksource has been installed.
[   18.708331] PCI: Bridge: 0000:00:1e.0
[   18.708338]   IO window: 3000-3fff
[   18.708351]   MEM window: f4100000-f41fffff
[   18.708358]   PREFETCH window: disabled.
[   18.708383] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   18.708420] NET: Registered protocol family 2
[   18.746659] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   18.746831] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[   18.747722] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[   18.748443] TCP: Hash tables configured (established 16384 bind 16384)
[   18.748453] TCP reno registered
[   18.758957] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[   19.394789]  it is
[   20.247948] Freeing initrd memory: 7044k freed
[   20.248333] Simple Boot Flag at 0x69 set to 0x1
[   20.249119] audit: initializing netlink socket (disabled)
[   20.249158] audit(1197153951.468:1): initialized
[   20.257649] VFS: Disk quotas dquot_6.5.1
[   20.257917] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   20.258281] io scheduler noop registered
[   20.258290] io scheduler anticipatory registered
[   20.258295] io scheduler deadline registered
[   20.258376] io scheduler cfq registered (default)
[   20.258410] Boot video device is 0000:00:02.0
[   20.258977] isapnp: Scanning for PnP cards...
[   20.612783] isapnp: No Plug & Play device found
[   20.779276] Real Time Clock Driver v1.12ac
[   20.779591] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   20.779754] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   20.780422] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   20.783087] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   20.784029] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   20.787067] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   20.787603] input: Macintosh mouse button emulation as /class/input/input0
[   20.787940] PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   20.790825] serio: i8042 KBD port at 0x60,0x64 irq 1
[   20.790844] serio: i8042 AUX port at 0x60,0x64 irq 12
[   20.791534] mice: PS/2 mouse device common for all mice
[   20.792021] EISA: Probing bus 0 at eisa.0
[   20.792044] Cannot allocate resource for EISA slot 1
[   20.792050] Cannot allocate resource for EISA slot 2
[   20.792056] Cannot allocate resource for EISA slot 3
[   20.792084] EISA: Detected 0 cards.
[   20.792356] TCP cubic registered
[   20.792408] NET: Registered protocol family 1
[   20.792479] Using IPI No-Shortcut mode
[   20.793018]   Magic number: 3:209:805
[   20.794987] Freeing unused kernel memory: 364k freed
[   20.852942] input: AT Translated Set 2 keyboard as /class/input/input1
[   22.591420] AppArmor: AppArmor initialized<5>audit(1197153953.468:2):  type=1505 info="AppArmor initialized" pid=1175
[   22.619782] fuse init (API version 7.8)
[   22.640604] Failure registering capabilities with primary security module.
[   24.780170] SCSI subsystem initialized
[   24.803687] libata version 2.21 loaded.
[   24.810751] ata_piix 0000:00:1f.1: version 2.11
[   24.810895] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   24.811305] scsi0 : ata_piix
[   24.811480] scsi1 : ata_piix
[   24.811771] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00012400 irq 14
[   24.811782] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00012408 irq 15
[   24.847496] usbcore: registered new interface driver usbfs
[   24.847568] usbcore: registered new interface driver hub
[   24.847658] usbcore: registered new device driver usb
[   24.851543] USB Universal Host Controller Interface driver v3.0
[   24.948296] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[   24.948308] e100: Copyright(c) 1999-2006 Intel Corporation
[   25.037664] ata1.00: ATA-6: SAMSUNG SP40A2H, RR100-07, max UDMA/100
[   25.037677] ata1.00: 78242976 sectors, multi 16: LBA
[   25.037912] ata1.01: ATA-6: ST380023A, 3.33, max UDMA/100
[   25.037919] ata1.01: 156301488 sectors, multi 16: LBA
[   25.045733] ata1.00: configured for UDMA/100
[   25.061883] ata1.01: configured for UDMA/100
[   25.333547] Floppy drive(s): fd0 is 1.44M
[   25.381389] ata2.00: ATAPI: FX4830T, R02E, max UDMA/33
[   25.431091] FDC 0 is a post-1991 82077
[   25.553161] ata2.00: configured for UDMA/33
[   25.553530] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP40A2H  RR10 PQ: 0 ANSI: 5
[   25.555066] scsi 0:0:1:0: Direct-Access     ATA      ST380023A        3.33 PQ: 0 ANSI: 5
[   25.556523] scsi scan: INQUIRY result too short (5), using 36
[   25.556546] scsi 1:0:0:0: Direct-Access                                    PQ: 0 ANSI: 5
[   25.564970] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[   25.564985] PCI: setting IRQ 9 as level-triggered
[   25.564991] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
[   25.565017] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   25.565027] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[   25.565445] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[   25.565492] uhci_hcd 0000:00:1f.2: irq 9, io base 0x00001400
[   25.565889] usb usb1: configuration #1 chosen from 1 choice
[   25.565966] hub 1-0:1.0: USB hub found
[   25.565993] hub 1-0:1.0: 2 ports detected
[   25.605839] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[   25.605881] sd 0:0:0:0: [sda] Write Protect is off
[   25.605888] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   25.605930] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   25.606125] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[   25.606153] sd 0:0:0:0: [sda] Write Protect is off
[   25.606159] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   25.606199] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   25.606215]  sda: sda1 sda2 < sda5 >
[   25.646138] sd 0:0:0:0: [sda] Attached SCSI disk
[   25.650574] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[   25.650655] sd 0:0:1:0: [sdb] Write Protect is off
[   25.650662] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[   25.650704] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   25.650876] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[   25.650903] sd 0:0:1:0: [sdb] Write Protect is off
[   25.650909] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[   25.650949] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   25.650959]  sdb: sdb1 sdb2 [   25.669664] PCI: setting IRQ 11 as level-triggered
[   25.669673] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[   25.669702] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[   25.669711] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[   25.669812] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[   25.669857] uhci_hcd 0000:00:1f.4: irq 11, io base 0x00001c00
[   25.670182] usb usb2: configuration #1 chosen from 1 choice
[   25.670261] hub 2-0:1.0: USB hub found
[   25.670286] hub 2-0:1.0: 2 ports detected
[   25.680238]  sdb5 >
[   25.682864] sd 0:0:1:0: [sdb] Attached SCSI disk
[   25.685696] sd 1:0:0:0: [sdc] Attached SCSI disk
[   25.703017] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   25.703851] sd 0:0:1:0: Attached scsi generic sg1 type 0
[   25.704639] sd 1:0:0:0: Attached scsi generic sg2 type 0
[   25.774032] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
[   25.774048] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9
[   25.797376] e100: eth0: e100_probe: addr 0xf4100000, irq 9, MAC addr 00:30:05:11:FE:01
[   25.908629] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   26.078489] usb 1-1: configuration #1 chosen from 1 choice
[   26.080389] hub 1-1:1.0: USB hub found
[   26.083252] hub 1-1:1.0: 4 ports detected
[   26.432290] usb 1-2: new full speed USB device using uhci_hcd and address 3
[   26.468872] Attempting manual resume
[   26.468886] swsusp: Resume From Partition 8:5
[   26.468890] PM: Checking swsusp image.
[   26.469305] PM: Resume from disk failed.
[   26.547963] kjournald starting.  Commit interval 5 seconds
[   26.548010] EXT3-fs: mounted filesystem with ordered data mode.
[   26.595024] usb 1-2: configuration #1 chosen from 1 choice
[   38.639458] i810_smbus 0000:00:02.0: i810/i815 i2c device found.
[   39.468689] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   39.485936] Linux agpgart interface v0.102 (c) Dave Jones
[   39.492176] agpgart: Detected an Intel i815 Chipset.
[   39.505215] agpgart: AGP aperture is 64M @ 0xf8000000
[   39.637903] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   39.649769] intel_rng: FWH not detected
[   39.735729] iTCO_vendor_support: vendor-support=0
[   39.739508] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   39.739758] iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0xf060)
[   39.739886] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   40.654244] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
[   42.480543] parport_pc 00:0a: reported by Plug and Play ACPI
[   42.480607] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   42.508541] input: PC Speaker as /class/input/input3
[   42.550479] Linux video capture interface: v2.00
[   42.715428] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found. SONIX sn9c10[1 2]
[   42.718971] usbcore: registered new interface driver gspca
[   42.718992] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[   43.026670] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.44
[   43.027986] usbcore: registered new interface driver sn9c102
[   43.061007] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[   43.061023] PCI: setting IRQ 5 as level-triggered
[   43.061030] ACPI: PCI Interrupt 0000:00:1f.5[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[   43.061088] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   43.733871] intel8x0_measure_ac97_clock: measured 54567 usecs
[   43.733887] intel8x0: clocking to 48000
[   44.137645] lp0: using parport0 (interrupt-driven).
[   44.258011] Adding 931728k swap on /dev/sda5.  Priority:-1 extents:1 across:931728k
[   44.625085] EXT3 FS on sda1, internal journal
[   47.121191] No dock devices found.
[   47.422863] input: Power Button (FF) as /class/input/input4
[   47.423709] ACPI: Power Button (FF) [PWRF]
[   47.454843] input: Power Button (CM) as /class/input/input5
[   47.455695] ACPI: Power Button (CM) [PWRB]
[   51.322165] ppdev: user-space parallel port driver
[   51.327725] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[   51.735988] audit(1197153983.790:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4611 profile="/usr/sbin/cupsd"
[   51.940145] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   51.940162] apm: overridden by ACPI.
[   52.743016] Failure registering capabilities with primary security module.
[   53.099363] Bluetooth: Core ver 2.11
[   53.099675] NET: Registered protocol family 31
[   53.099684] Bluetooth: HCI device and connection manager initialized
[   53.099693] Bluetooth: HCI socket layer initialized
[   53.136090] Bluetooth: L2CAP ver 2.8
[   53.136105] Bluetooth: L2CAP socket layer initialized
[   53.219411] Bluetooth: RFCOMM socket layer initialized
[   53.219640] Bluetooth: RFCOMM TTY layer initialized
[   53.219647] Bluetooth: RFCOMM ver 1.8
[   57.455619] NET: Registered protocol family 17
[   59.623148] NET: Registered protocol family 10
[   59.623814] lo: Disabled Privacy Extensions
[   69.720388] eth0: no IPv6 routers present
[  106.134317] Clocksource tsc unstable (delta = -186688095 ns)
[  106.138276] Time: acpi_pm clocksource has been installed.

[Johan van Dijk]

Ik denk dat ze de flash plugin voor Linux aan het updaten zijn ofzo.
Ik ben nu bezig om een computer te installeren, maar daar krijg ik de flash plugin niet eens geïnstalleerd

[Tom4]

laat me hopen dat het dat is

[Johan van Dijk]

laat me hopen dat het dat is

Kijk ook hier: http://forum.ubuntu-nl.org/topic/19209

[quick30]

Ik hoop mee.

Keek even in de dmesg uitvoer. Er stond wel wat interessants tussen. Als je problemen hebt met een apparaat dan staat er al een tip in.

Dit las ik ook:
"eth0: no IPv6 routers present"
Wellicht dat internet sneller gaat als je IPv6 uitzet? Heb het niet gevolgd maar ik verwacht dat er toch heel wat providers zijn met IPv6 ondersteuning. Nu ik er over nadenk; zal de mijne eens gaan uitzoeken.