Sinds Intrepid (ook bij Jaunty en nu ook met Karmic alpha) zijn er bij mij problemen bij het laden van een audio cd. Met een dvd of data cd is er niets aan de hand. Een audio-cd heeft echter heel lang tijd nodig voor hij zich laat zien op het bureaublad. Voor die tijd is het wel zichtbaar onder Nautilus maar ik kan er verder niets mee doen. Het vreemde is dat het soms wel goed gaat, maar dat zijn uitzonderingen. Ik heb alle codecs uiteraard geïnstalleerd overigens. Het is volgens mij een hardware fout. Mogelijk een bios probleem? Ik dacht heel even dat het toevoegen van
libata
ata_piix
piix
aan mijn /etc/modules een oplossing zou geven (het ging circa 10 cd's goed) maar dat is dus niet zo.
Heeft iemand een idee hoe ik dat kan oplossen?
Een paar geraadpleegde bronnen:
https://help.ubuntu.com/community/DMAhttps://answers.launchpad.net/ubuntu/+question/10747Ter info 3 ouputs:
**OUTPUT sudo lshw-gtk**:
product: CD/DVDW SH-S182D
vendor: TSSTcorp
bus info: scsi@6:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/scd0
logical name: /dev/sr0
logical name: /media/cdrom0
version: SB04
capabilities:
support is removable,
Audio CD playback,
CD-R burning,
CD-RW burning,
DVD playback,
DVD-R burning,
DVD-RAM burning
configuration:
ansiversion: 5
mount.fstype: iso9660
mount.options: ro,nosuid,nodev,relatime,utf8
state: mounted
status: ready
**OUTPUT mount | egrep 'udf|iso9660'**:
/dev/sr0 on /media/cdrom0 type iso9660 (ro,nosuid,nodev,utf8,user=jos)
**OUTPUT dmesg | grep ata**:
dmesg | grep ata
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] modified: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] PERCPU: Embedded 14 pages at c200a000, static data 35036 bytes
[ 0.000000] Memory: 2052260k/2096000k available (4532k kernel code, 42444k reserved, 2120k data, 536k init, 1186696k highmem)
[ 0.000000] .data : 0xc056d334 - 0xc077f568 (2120 kB)
[ 0.277447] libata version 3.00 loaded.
[ 0.921823] sata_nv 0000:00:05.0: version 3.5
[ 0.922181] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.922184] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 0.922222] sata_nv 0000:00:05.0: setting latency timer to 64
[ 0.922343] scsi0 : sata_nv
[ 0.922509] scsi1 : sata_nv
[ 0.922761] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23
[ 0.922763] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23
[ 0.923124] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 0.923126] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 0.923155] sata_nv 0000:00:05.1: setting latency timer to 64
[ 0.933524] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.933771] scsi2 : sata_nv
[ 0.943784] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.943914] scsi3 : sata_nv
[ 0.944174] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22
[ 0.944177] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22
[ 0.944544] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[ 0.944546] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 0.944578] sata_nv 0000:00:05.2: setting latency timer to 64
[ 0.954917] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.955011] scsi4 : sata_nv
[ 0.955132] scsi5 : sata_nv
[ 0.955349] ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21
[ 0.955352] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21
[ 0.965589] ata5: SATA link down (SStatus 0 SControl 300)
[ 0.965860] pata_amd 0000:00:04.0: version 0.4.1
[ 0.965889] pata_amd 0000:00:04.0: setting latency timer to 64
[ 0.965944] scsi6 : pata_amd
[ 0.966067] scsi7 : pata_amd
[ 0.966743] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.966746] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.108038] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.116428] ata4.00: ATA-8: WDC WD10EACS-00D6B1, 01.01A01, max UDMA/133
[ 1.116431] ata4.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 1.128242] ata7.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB04, max UDMA/33
[ 1.128263] ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 1.132433] ata4.00: configured for UDMA/133
[ 1.143086] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.144202] ata7.00: configured for UDMA/33
[ 1.152267] ata8: port disabled. ignoring.
[ 1.170616] Write protecting the kernel read-only data: 1824k
[ 2.350451] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 11.809516] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 11.850534] EXT3-fs: mounted filesystem with writeback data mode.
[ 679.988067] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 679.988095] ata7.00: cmd a0/00:00:00:04:00/00:00:00:00:00/a0 tag 0 pio 16388 in
[ 679.988109] ata7.00: status: { DRDY }
[ 685.028032] ata7: link is slow to respond, please be patient (ready=0)
[ 690.012042] ata7: device not ready (errno=-16), forcing hardreset
[ 690.012056] ata7: soft resetting link
[ 690.176332] ata7: nv_mode_filter: 0x701f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 690.193250] ata7.00: configured for UDMA/33
[ 690.193483] ata7: EH complete
[ 751.989072] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 751.989101] ata7.00: cmd a0/00:00:00:04:00/00:00:00:00:00/a0 tag 0 pio 16388 in
[ 751.989115] ata7.00: status: { DRDY }
[ 757.028032] ata7: link is slow to respond, please be patient (ready=0)
[ 762.012036] ata7: device not ready (errno=-16), forcing hardreset
[ 762.012050] ata7: soft resetting link
[ 762.176332] ata7: nv_mode_filter: 0x701f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 762.192244] ata7.00: configured for UDMA/33
[ 762.192529] ata7: EH complete
[ 1531.988072] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1531.988100] ata7.00: cmd a0/00:00:00:04:00/00:00:00:00:00/a0 tag 0 pio 16388 in
[ 1531.988114] ata7.00: status: { DRDY }
[ 1537.032038] ata7: link is slow to respond, please be patient (ready=0)
[ 1542.017048] ata7: device not ready (errno=-16), forcing hardreset
[ 1542.017062] ata7: soft resetting link
[ 1542.181383] ata7: nv_mode_filter: 0x701f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 1542.197252] ata7.00: configured for UDMA/33
[ 1542.197484] ata7: EH complete
[ 2508.989076] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2508.989104] ata7.00: cmd a0/00:00:00:04:00/00:00:00:00:00/a0 tag 0 pio 16388 in
[ 2508.989117] ata7.00: status: { DRDY }
[ 2514.037023] ata7: link is slow to respond, please be patient (ready=0)
[ 2519.020039] ata7: device not ready (errno=-16), forcing hardreset
[ 2519.020053] ata7: soft resetting link
[ 2519.184338] ata7: nv_mode_filter: 0x701f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 2519.200244] ata7.00: configured for UDMA/33
[ 2519.200608] ata7: EH complete
[ 3474.000080] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 3474.000109] ata7.00: cmd a0/00:00:00:04:00/00:00:00:00:00/a0 tag 0 pio 16388 in
[ 3474.000123] ata7.00: status: { DRDY }
[ 3479.040058] ata7: link is slow to respond, please be patient (ready=0)
[ 3484.024049] ata7: device not ready (errno=-16), forcing hardreset
[ 3484.024063] ata7: soft resetting link
[ 3484.189360] ata7: nv_mode_filter: 0x701f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 3484.197247] ata7.00: configured for UDMA/33
[ 3484.197489] ata7: EH complete
[ 3545.988081] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 3545.988109] ata7.00: cmd a0/00:00:00:04:00/00:00:00:00:00/a0 tag 0 pio 16388 in
[ 3545.988123] ata7.00: status: { DRDY }
[ 3551.029057] ata7: link is slow to respond, please be patient (ready=0)
[ 3556.012029] ata7: device not ready (errno=-16), forcing hardreset
[ 3556.012043] ata7: soft resetting link
[ 3556.179347] ata7: nv_mode_filter: 0x701f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 3556.192259] ata7.00: configured for UDMA/33
[ 3556.192512] ata7: EH complete
moderator edit: de output tussen code tags gezet