Uiteraard ook na modprobe -r ook modprobe weer gedaan. Helaas.
USB-muis eruit en er weer in werkt ook niet.
Hier komt dan uitput van dmesg voor suspend:
**********
[4294667.296000] Linux version 2.6.12-10-386 (buildd@terranova) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Thu Dec 22 11:37:10 UTC 2005
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000eb800 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000000c000000 (usable)
[4294667.296000] BIOS-e820: 00000000fffeb800 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 192MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 49152
[4294667.296000] DMA zone: 4096 pages, LIFO batch:1
[4294667.296000] Normal zone: 45056 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:1
[4294667.296000] DMI not present.
[4294667.296000] ACPI: Unable to locate RSDP
[4294667.296000] Allocating PCI resources starting at 0c000000 (gap: 0c000000:f3feb800)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (01181000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[ 0.000000] Detected 400.098 MHz processor.
[ 1271.125627] Using tsc for high-res timesource
[ 1271.127207] Console: colour VGA+ 80x25
[ 1271.128358] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1271.129257] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 1271.162905] Memory: 186500k/196608k available (1416k kernel code, 9592k reserved, 762k data, 224k init, 0k highmem)
[ 1271.162925] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 1271.163192] Calibrating delay loop... 788.48 BogoMIPS (lpj=394240)
[ 1271.186304] Security Framework v1.0.0 initialized
[ 1271.186327] SELinux: Disabled at boot.
[ 1271.186375] Mount-cache hash table entries: 512
[ 1271.186717] CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 1271.186750] CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 1271.186792] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 1271.186806] CPU: L2 cache: 256K
[ 1271.186818] CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 1271.186843] CPU: Intel Mobile Pentium II stepping 0a
[ 1271.186860] Enabling fast FPU save and restore... done.
[ 1271.186878] Checking 'hlt' instruction... OK.
[ 1271.190208] Checking for popad bug... OK.
[ 1271.190718] checking if image is initramfs... it is
[ 1273.203121] Freeing initrd memory: 5172k freed
[ 1273.205747] NET: Registered protocol family 16
[ 1273.205880] EISA bus registered
[ 1273.206327] PCI: PCI BIOS revision 2.10 entry at 0xfd9d3, last bus=1
[ 1273.206354] PCI: Using configuration type 1
[ 1273.206369] mtrr: v2.0 (20020519)
[ 1273.207873] ACPI: Subsystem revision 20050729
[ 1273.207887] ACPI: Interpreter disabled.
[ 1273.207902] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1273.207951] pnp: PnP ACPI: disabled
[ 1273.207965] PnPBIOS: Scanning system for PnP BIOS support...
[ 1273.208027] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6e60
[ 1273.208045] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb3ba, dseg 0x400
[ 1273.226369] PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
[ 1273.226549] PCI: Probing PCI hardware
[ 1273.226564] PCI: Probing PCI hardware (bus 00)
[ 1273.227888] Boot video device is 0000:01:00.0
[ 1273.229820] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
[ 1273.229854] PCI: IRQ 0 for device 0000:00:04.0 doesn't match PIRQ mask - try pci=usepirqmask
[ 1273.229874] PCI: Found IRQ 11 for device 0000:00:04.0
[ 1273.229906] PCI: Sharing IRQ 11 with 0000:01:00.0
[ 1273.229949] PCI: IRQ 0 for device 0000:00:04.1 doesn't match PIRQ mask - try pci=usepirqmask
[ 1273.229966] PCI: Found IRQ 11 for device 0000:00:04.1
[ 1273.232571] pnp: 00:00: ioport range 0x401-0x407 has been reserved
[ 1273.232588] pnp: 00:00: ioport range 0x3810-0x388f has been reserved
[ 1273.232636] pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 1273.232652] pnp: 00:0a: ioport range 0x8000-0x803f has been reserved
[ 1273.232669] pnp: 00:0a: ioport range 0x2180-0x218f has been reserved
[ 1273.235188] audit: initializing netlink socket (disabled)
[ 1273.235219] audit: initialized
[ 1273.235613] VFS: Disk quotas dquot_6.5.1
[ 1273.235696] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1273.235814] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
[ 1273.235838] devfs: boot_options: 0x0
[ 1273.235985] Initializing Cryptographic API
[ 1273.236008] Limiting direct PCI/PCI transfers.
[ 1273.236409] isapnp: Scanning for PnP cards...
[ 1273.589817] isapnp: No Plug & Play device found
[ 1273.673003] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 1273.681265] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1273.682278] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1273.682298] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[ 1273.682678] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1273.683156] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1273.692308] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1273.692805] io scheduler noop registered
[ 1273.692888] io scheduler anticipatory registered
[ 1273.692910] io scheduler deadline registered
[ 1273.692956] io scheduler cfq registered
[ 1273.694792] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1273.696502] EISA: Probing bus 0 at eisa.0
[ 1273.696537] Cannot allocate resource for EISA slot 3
[ 1273.696571] Cannot allocate resource for EISA slot 8
[ 1273.696582] EISA: Detected 0 cards.
[ 1273.696688] NET: Registered protocol family 2
[ 1273.706058] IP: routing cache hash table of 2048 buckets, 16Kbytes
[ 1273.706626] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1273.706987] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 1273.707163] TCP: Hash tables configured (established 8192 bind 8192)
[ 1273.707523] NET: Registered protocol family 8
[ 1273.707537] NET: Registered protocol family 20
[ 1273.709111] Freeing unused kernel memory: 224k freed
[ 1273.771635] input: AT Translated Set 2 keyboard on isa0060/serio0
[ 1273.783667] vga16fb: initializing
[ 1273.783683] vga16fb: mapped to 0xc00a0000
[ 1273.921051] Console: switching to colour frame buffer device 80x30
[ 1273.921077] fb0: VGA16 VGA frame buffer device
[ 1275.175700] Capability LSM initialized
[ 1275.232539] NET: Registered protocol family 1
[ 1275.296768] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1275.296809] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1275.319369] PIIX4: IDE controller at PCI slot 0000:00:07.1
[ 1275.319416] PIIX4: chipset revision 1
[ 1275.319427] PIIX4: not 100% native mode: will probe irqs later
[ 1275.319457] ide0: BM-DMA at 0xfcd0-0xfcd7, BIOS settings: hda:DMA, hdb:pio
[ 1275.319497] ide1: BM-DMA at 0xfcd8-0xfcdf, BIOS settings: hdc:DMA, hdd:pio
[ 1275.319532] Probing IDE interface ide0...
[ 1275.582752] hda: FUJITSU MHG2102AT, ATA DISK drive
[ 1276.198712] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1276.198924] Probing IDE interface ide1...
[ 1276.870573] hdc: TOSHIBA CD-ROM XM-1902B, ATAPI CD/DVD-ROM drive
[ 1277.176434] ide1 at 0x170-0x177,0x376 on irq 15
[ 1277.176791] Probing IDE interface ide2...
[ 1277.689302] Probing IDE interface ide3...
[ 1278.202230] Probing IDE interface ide4...
[ 1278.715158] Probing IDE interface ide5...
[ 1279.247273] hda: max request size: 128KiB
[ 1279.326879] hda: 19640880 sectors (10056 MB) w/512KiB Cache, CHS=19485/16/63, UDMA(33)
[ 1279.326905] hda: cache flushes not supported
[ 1279.327162] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
[ 1279.411524] hdc: ATAPI 24X CD-ROM drive, 128kB Cache
[ 1279.411551] Uniform CD-ROM driver Revision: 3.20
[ 1280.619861] Attempting manual resume
[ 1280.620457] swsusp: Suspend partition has wrong signature?
[ 1280.880027] usbcore: registered new driver usbfs
[ 1280.880153] usbcore: registered new driver hub
[ 1280.886334] USB Universal Host Controller Interface driver v2.2
[ 1280.886567] PCI: Found IRQ 11 for device 0000:00:07.2
[ 1280.886630] uhci_hcd 0000:00:07.2: Intel Corporation 82371AB/EB/MB PIIX4 USB
[ 1280.948300] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 1280.948334] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000fce0
[ 1280.948908] hub 1-0:1.0: USB hub found
[ 1280.948950] hub 1-0:1.0: 2 ports detected
[ 1281.117830] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 1281.271638] hub 1-0:1.0: over-current change on port 2
[ 1283.134949] usbcore: registered new driver hiddev
[ 1283.197250] input: USB HID v1.10 Mouse [1241:1166] on usb-0000:00:07.2-1
[ 1283.197282] usbcore: registered new driver usbhid
[ 1283.197294] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[ 1284.869567] Attempting manual resume
[ 1284.901314] swsusp: Suspend partition has wrong signature?
[ 1284.990861] kjournald starting. Commit interval 5 seconds
[ 1284.990906] EXT3-fs: mounted filesystem with ordered data mode.
[ 1287.532353] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 1296.648993] Adding 433712k swap on /dev/hda5. Priority:-1 extents:1
[ 1297.273304] EXT3 FS on hda1, internal journal
[ 1319.254625] parport: PnPBIOS parport detected.
[ 1319.254712] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 1319.361017] lp0: using parport0 (interrupt-driven).
[ 1319.622672] mice: PS/2 mouse device common for all mice
[ 1320.913413] Synaptics Touchpad, model: 1, fw: 4.3, id: 0x8858a1, caps: 0x0/0x0
[ 1320.936270] input: SynPS/2 Synaptics TouchPad on isa0060/serio1
[ 1322.422162] ts: Compaq touchscreen protocol output
[ 1327.520745] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[ 1329.935313] hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
[ 1329.935338] hdc: packet command error: error=0x50 { LastFailedSense=0x05 }
[ 1329.935355] ide: failed opcode was: unknown
[ 1329.936128] cdrom: open failed.
[ 1335.049343] Linux agpgart interface v0.101 (c) Dave Jones
[ 1335.093449] agpgart: Detected an Intel 440BX Chipset.
[ 1335.141403] agpgart: AGP aperture is 64M @ 0xe0000000
[ 1335.606639] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1335.633218] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
[ 1336.070561] Linux Kernel Card Services
[ 1336.070585] options: [pci] [cardbus] [pm]
[ 1336.140226] PCI: Found IRQ 11 for device 0000:00:04.0
[ 1336.140273] PCI: Sharing IRQ 11 with 0000:01:00.0
[ 1336.140328] Yenta: CardBus bridge found at 0000:00:04.0 [1028:0085]
[ 1336.140402] Yenta: Enabling burst memory read transactions
[ 1336.140418] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 1336.140431] Yenta: Routing CardBus interrupts to PCI
[ 1336.140449] Yenta TI: socket 0000:00:04.0, mfunc 0x01021c72, devctl 0x66
[ 1336.361708] Yenta: ISA IRQ mask 0x0618, PCI irq 11
[ 1336.361724] Socket status: 30000068
[ 1336.433596] PCI: Found IRQ 11 for device 0000:00:04.1
[ 1336.433673] Yenta: CardBus bridge found at 0000:00:04.1 [1028:0085]
[ 1336.433748] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 1336.433760] Yenta: Routing CardBus interrupts to PCI
[ 1336.433778] Yenta TI: socket 0000:00:04.1, mfunc 0x01021c72, devctl 0x66
[ 1336.654662] Yenta: ISA IRQ mask 0x0618, PCI irq 11
[ 1336.654677] Socket status: 30000068
[ 1337.821554] 8139too Fast Ethernet driver 0.9.27
[ 1337.840250] PCI: Enabling device 0000:02:00.0 (0000 -> 0003)
[ 1337.840304] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 1337.845507] eth0: RealTek RTL8139 at 0x4000, 00:10:d7:0a:00:bc, IRQ 11
[ 1337.845524] eth0: Identified 8139 chip type 'RTL-8139B'
[ 1339.022633] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 1339.743190] PCI: Found IRQ 5 for device 0000:00:08.0
[ 1339.743291] es1968: not attempting power management.
[ 1340.332523] es1968: clocking to 48000
[ 1344.848340] Real Time Clock Driver v1.12
[ 1345.446082] input: PC Speaker
[ 1346.780933] irda_init()
[ 1346.781005] NET: Registered protocol family 23
[ 1347.007664] Floppy drive(s): fd0 is 1.44M
[ 1347.022341] FDC 0 is a post-1991 82077
[ 1349.407341] ndiswrapper version 1.1 loaded (preempt=no,smp=no)
[ 1349.535259] ndiswrapper: driver bcmwl5 (Broadcom,06/25/2004, 3.40.73.0) loaded
[ 1349.535948] PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
[ 1349.536055] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 1349.550080] ndiswrapper: using irq 11
[ 1350.202599] wlan0: ndiswrapper ethernet device 00:11:50:37:c2:34 using driver bcmwl5, configuration file 14E4:4320.5.conf
[ 1350.203155] wlan0: encryption modes supported: WEP, WPA with TKIP, WPA with AES/CCMP
[ 1351.631688] NET: Registered protocol family 17
[ 1356.584406] NET: Registered protocol family 10
[ 1356.584956] Disabled Privacy Extensions on device c02eb280(lo)
[ 1356.585638] IPv6 over IPv4 tunneling driver
[ 1367.341724] wlan0: no IPv6 routers present
********
En na suspend
***********************************
[4294667.296000] Linux version 2.6.12-10-386 (buildd@terranova) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Thu Dec 22 11:37:10 UTC 2005
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000eb800 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000000c000000 (usable)
[4294667.296000] BIOS-e820: 00000000fffeb800 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 192MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 49152
[4294667.296000] DMA zone: 4096 pages, LIFO batch:1
[4294667.296000] Normal zone: 45056 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:1
[4294667.296000] DMI not present.
[4294667.296000] ACPI: Unable to locate RSDP
[4294667.296000] Allocating PCI resources starting at 0c000000 (gap: 0c000000:f3feb800)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (01181000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[ 0.000000] Detected 400.098 MHz processor.
[ 1271.125627] Using tsc for high-res timesource
[ 1271.127207] Console: colour VGA+ 80x25
[ 1271.128358] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1271.129257] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 1271.162905] Memory: 186500k/196608k available (1416k kernel code, 9592k reserved, 762k data, 224k init, 0k highmem)
[ 1271.162925] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 1271.163192] Calibrating delay loop... 788.48 BogoMIPS (lpj=394240)
[ 1271.186304] Security Framework v1.0.0 initialized
[ 1271.186327] SELinux: Disabled at boot.
[ 1271.186375] Mount-cache hash table entries: 512
[ 1271.186717] CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 1271.186750] CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 1271.186792] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 1271.186806] CPU: L2 cache: 256K
[ 1271.186818] CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 1271.186843] CPU: Intel Mobile Pentium II stepping 0a
[ 1271.186860] Enabling fast FPU save and restore... done.
[ 1271.186878] Checking 'hlt' instruction... OK.
[ 1271.190208] Checking for popad bug... OK.
[ 1271.190718] checking if image is initramfs... it is
[ 1273.203121] Freeing initrd memory: 5172k freed
[ 1273.205747] NET: Registered protocol family 16
[ 1273.205880] EISA bus registered
[ 1273.206327] PCI: PCI BIOS revision 2.10 entry at 0xfd9d3, last bus=1
[ 1273.206354] PCI: Using configuration type 1
[ 1273.206369] mtrr: v2.0 (20020519)
[ 1273.207873] ACPI: Subsystem revision 20050729
[ 1273.207887] ACPI: Interpreter disabled.
[ 1273.207902] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1273.207951] pnp: PnP ACPI: disabled
[ 1273.207965] PnPBIOS: Scanning system for PnP BIOS support...
[ 1273.208027] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6e60
[ 1273.208045] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb3ba, dseg 0x400
[ 1273.226369] PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
[ 1273.226549] PCI: Probing PCI hardware
[ 1273.226564] PCI: Probing PCI hardware (bus 00)
[ 1273.227888] Boot video device is 0000:01:00.0
[ 1273.229820] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
[ 1273.229854] PCI: IRQ 0 for device 0000:00:04.0 doesn't match PIRQ mask - try pci=usepirqmask
[ 1273.229874] PCI: Found IRQ 11 for device 0000:00:04.0
[ 1273.229906] PCI: Sharing IRQ 11 with 0000:01:00.0
[ 1273.229949] PCI: IRQ 0 for device 0000:00:04.1 doesn't match PIRQ mask - try pci=usepirqmask
[ 1273.229966] PCI: Found IRQ 11 for device 0000:00:04.1
[ 1273.232571] pnp: 00:00: ioport range 0x401-0x407 has been reserved
[ 1273.232588] pnp: 00:00: ioport range 0x3810-0x388f has been reserved
[ 1273.232636] pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 1273.232652] pnp: 00:0a: ioport range 0x8000-0x803f has been reserved
[ 1273.232669] pnp: 00:0a: ioport range 0x2180-0x218f has been reserved
[ 1273.235188] audit: initializing netlink socket (disabled)
[ 1273.235219] audit: initialized
[ 1273.235613] VFS: Disk quotas dquot_6.5.1
[ 1273.235696] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1273.235814] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
[ 1273.235838] devfs: boot_options: 0x0
[ 1273.235985] Initializing Cryptographic API
[ 1273.236008] Limiting direct PCI/PCI transfers.
[ 1273.236409] isapnp: Scanning for PnP cards...
[ 1273.589817] isapnp: No Plug & Play device found
[ 1273.673003] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 1273.681265] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1273.682278] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1273.682298] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[ 1273.682678] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1273.683156] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1273.692308] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1273.692805] io scheduler noop registered
[ 1273.692888] io scheduler anticipatory registered
[ 1273.692910] io scheduler deadline registered
[ 1273.692956] io scheduler cfq registered
[ 1273.694792] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1273.696502] EISA: Probing bus 0 at eisa.0
[ 1273.696537] Cannot allocate resource for EISA slot 3
[ 1273.696571] Cannot allocate resource for EISA slot 8
[ 1273.696582] EISA: Detected 0 cards.
[ 1273.696688] NET: Registered protocol family 2
[ 1273.706058] IP: routing cache hash table of 2048 buckets, 16Kbytes
[ 1273.706626] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1273.706987] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 1273.707163] TCP: Hash tables configured (established 8192 bind 8192)
[ 1273.707523] NET: Registered protocol family 8
[ 1273.707537] NET: Registered protocol family 20
[ 1273.709111] Freeing unused kernel memory: 224k freed
[ 1273.771635] input: AT Translated Set 2 keyboard on isa0060/serio0
[ 1273.783667] vga16fb: initializing
[ 1273.783683] vga16fb: mapped to 0xc00a0000
[ 1273.921051] Console: switching to colour frame buffer device 80x30
[ 1273.921077] fb0: VGA16 VGA frame buffer device
[ 1275.175700] Capability LSM initialized
[ 1275.232539] NET: Registered protocol family 1
[ 1275.296768] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1275.296809] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1275.319369] PIIX4: IDE controller at PCI slot 0000:00:07.1
[ 1275.319416] PIIX4: chipset revision 1
[ 1275.319427] PIIX4: not 100% native mode: will probe irqs later
[ 1275.319457] ide0: BM-DMA at 0xfcd0-0xfcd7, BIOS settings: hda:DMA, hdb:pio
[ 1275.319497] ide1: BM-DMA at 0xfcd8-0xfcdf, BIOS settings: hdc:DMA, hdd:pio
[ 1275.319532] Probing IDE interface ide0...
[ 1275.582752] hda: FUJITSU MHG2102AT, ATA DISK drive
[ 1276.198712] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1276.198924] Probing IDE interface ide1...
[ 1276.870573] hdc: TOSHIBA CD-ROM XM-1902B, ATAPI CD/DVD-ROM drive
[ 1277.176434] ide1 at 0x170-0x177,0x376 on irq 15
[ 1277.176791] Probing IDE interface ide2...
[ 1277.689302] Probing IDE interface ide3...
[ 1278.202230] Probing IDE interface ide4...
[ 1278.715158] Probing IDE interface ide5...
[ 1279.247273] hda: max request size: 128KiB
[ 1279.326879] hda: 19640880 sectors (10056 MB) w/512KiB Cache, CHS=19485/16/63, UDMA(33)
[ 1279.326905] hda: cache flushes not supported
[ 1279.327162] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
[ 1279.411524] hdc: ATAPI 24X CD-ROM drive, 128kB Cache
[ 1279.411551] Uniform CD-ROM driver Revision: 3.20
[ 1280.619861] Attempting manual resume
[ 1280.620457] swsusp: Suspend partition has wrong signature?
[ 1280.880027] usbcore: registered new driver usbfs
[ 1280.880153] usbcore: registered new driver hub
[ 1280.886334] USB Universal Host Controller Interface driver v2.2
[ 1280.886567] PCI: Found IRQ 11 for device 0000:00:07.2
[ 1280.886630] uhci_hcd 0000:00:07.2: Intel Corporation 82371AB/EB/MB PIIX4 USB
[ 1280.948300] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 1280.948334] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000fce0
[ 1280.948908] hub 1-0:1.0: USB hub found
[ 1280.948950] hub 1-0:1.0: 2 ports detected
[ 1281.117830] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 1281.271638] hub 1-0:1.0: over-current change on port 2
[ 1283.134949] usbcore: registered new driver hiddev
[ 1283.197250] input: USB HID v1.10 Mouse [1241:1166] on usb-0000:00:07.2-1
[ 1283.197282] usbcore: registered new driver usbhid
[ 1283.197294] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[ 1284.869567] Attempting manual resume
[ 1284.901314] swsusp: Suspend partition has wrong signature?
[ 1284.990861] kjournald starting. Commit interval 5 seconds
[ 1284.990906] EXT3-fs: mounted filesystem with ordered data mode.
[ 1287.532353] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 1296.648993] Adding 433712k swap on /dev/hda5. Priority:-1 extents:1
[ 1297.273304] EXT3 FS on hda1, internal journal
[ 1319.254625] parport: PnPBIOS parport detected.
[ 1319.254712] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 1319.361017] lp0: using parport0 (interrupt-driven).
[ 1319.622672] mice: PS/2 mouse device common for all mice
[ 1320.913413] Synaptics Touchpad, model: 1, fw: 4.3, id: 0x8858a1, caps: 0x0/0x0
[ 1320.936270] input: SynPS/2 Synaptics TouchPad on isa0060/serio1
[ 1322.422162] ts: Compaq touchscreen protocol output
[ 1327.520745] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[ 1329.935313] hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
[ 1329.935338] hdc: packet command error: error=0x50 { LastFailedSense=0x05 }
[ 1329.935355] ide: failed opcode was: unknown
[ 1329.936128] cdrom: open failed.
[ 1335.049343] Linux agpgart interface v0.101 (c) Dave Jones
[ 1335.093449] agpgart: Detected an Intel 440BX Chipset.
[ 1335.141403] agpgart: AGP aperture is 64M @ 0xe0000000
[ 1335.606639] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1335.633218] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
[ 1336.070561] Linux Kernel Card Services
[ 1336.070585] options: [pci] [cardbus] [pm]
[ 1336.140226] PCI: Found IRQ 11 for device 0000:00:04.0
[ 1336.140273] PCI: Sharing IRQ 11 with 0000:01:00.0
[ 1336.140328] Yenta: CardBus bridge found at 0000:00:04.0 [1028:0085]
[ 1336.140402] Yenta: Enabling burst memory read transactions
[ 1336.140418] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 1336.140431] Yenta: Routing CardBus interrupts to PCI
[ 1336.140449] Yenta TI: socket 0000:00:04.0, mfunc 0x01021c72, devctl 0x66
[ 1336.361708] Yenta: ISA IRQ mask 0x0618, PCI irq 11
[ 1336.361724] Socket status: 30000068
[ 1336.433596] PCI: Found IRQ 11 for device 0000:00:04.1
[ 1336.433673] Yenta: CardBus bridge found at 0000:00:04.1 [1028:0085]
[ 1336.433748] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 1336.433760] Yenta: Routing CardBus interrupts to PCI
[ 1336.433778] Yenta TI: socket 0000:00:04.1, mfunc 0x01021c72, devctl 0x66
[ 1336.654662] Yenta: ISA IRQ mask 0x0618, PCI irq 11
[ 1336.654677] Socket status: 30000068
[ 1337.821554] 8139too Fast Ethernet driver 0.9.27
[ 1337.840250] PCI: Enabling device 0000:02:00.0 (0000 -> 0003)
[ 1337.840304] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 1337.845507] eth0: RealTek RTL8139 at 0x4000, 00:10:d7:0a:00:bc, IRQ 11
[ 1337.845524] eth0: Identified 8139 chip type 'RTL-8139B'
[ 1339.022633] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 1339.743190] PCI: Found IRQ 5 for device 0000:00:08.0
[ 1339.743291] es1968: not attempting power management.
[ 1340.332523] es1968: clocking to 48000
[ 1344.848340] Real Time Clock Driver v1.12
[ 1345.446082] input: PC Speaker
[ 1346.780933] irda_init()
[ 1346.781005] NET: Registered protocol family 23
[ 1347.007664] Floppy drive(s): fd0 is 1.44M
[ 1347.022341] FDC 0 is a post-1991 82077
[ 1349.407341] ndiswrapper version 1.1 loaded (preempt=no,smp=no)
[ 1349.535259] ndiswrapper: driver bcmwl5 (Broadcom,06/25/2004, 3.40.73.0) loaded
[ 1349.535948] PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
[ 1349.536055] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 1349.550080] ndiswrapper: using irq 11
[ 1350.202599] wlan0: ndiswrapper ethernet device 00:11:50:37:c2:34 using driver bcmwl5, configuration file 14E4:4320.5.conf
[ 1350.203155] wlan0: encryption modes supported: WEP, WPA with TKIP, WPA with AES/CCMP
[ 1351.631688] NET: Registered protocol family 17
[ 1356.584406] NET: Registered protocol family 10
[ 1356.584956] Disabled Privacy Extensions on device c02eb280(lo)
[ 1356.585638] IPv6 over IPv4 tunneling driver
[ 1367.341724] wlan0: no IPv6 routers present
[ 1565.401710] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 1569.433806] cs: IO port probe 0x100-0x4ff: clean.
[ 1569.435248] cs: IO port probe 0x100-0x4ff: clean.
[ 1569.437693] cs: IO port probe 0xc00-0xcf7: clean.
[ 1569.438098] cs: IO port probe 0xc00-0xcf7: clean.
[ 1569.439506] cs: IO port probe 0xa00-0xaff: clean.
[ 1569.439924] cs: IO port probe 0xa00-0xaff: clean.
[ 1607.115910] IDE device ACPI handler is NULL
[ 1607.115961] IDE device ACPI handler is NULL
[ 1610.633568] hub 1-0:1.0: resubmit --> -108
[ 16.012117] PCI: Found IRQ 11 for device 0000:00:04.0
[ 16.012160] PCI: Sharing IRQ 11 with 0000:01:00.0
[ 16.012499] hub 1-0:1.0: hub_port_status failed (err = -108)
[ 16.012518] hub 1-0:1.0: hub_port_status failed (err = -108)
[ 16.527006] PCI: Found IRQ 11 for device 0000:00:04.1
[ 17.229942] PCI: Found IRQ 11 for device 0000:00:07.2
[ 17.291855] PCI: Found IRQ 11 for device 0000:00:07.2
[ 18.025574] IDE device ACPI handler is NULL
[ 18.043343] IDE device ACPI handler is NULL
[ 18.093506] PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
[ 18.106592] ndiswrapper: using irq 11
*********************************
Geeft dit bruikbare info?
