Cumulus hartelijk dank voor de snelle reactie.
Graag post ik deze info. Heb delen weggelaten vanwege de karakters.
Groet,
Dick
[ 2.196072] usbcore: registered new interface driver usbfs
[ 2.196072] usbcore: registered new interface driver hub
[ 2.196089] usbcore: registered new device driver usb
[ 2.897174] hub 1-0:1.0: USB hub found
[ 2.897185] hub 1-0:1.0: 8 ports detected
[ 2.898364] usb usb5: configuration #1 chosen from 1 choice
[ 2.898403] hub 5-0:1.0: USB hub found
[ 2.898413] hub 5-0:1.0: 2 ports detected
[ 3.264037] usb 1-8: new high speed USB device using ehci_hcd and address 3
[ 3.401536] usb 1-8: configuration #1 chosen from 1 choice
[ 3.964771] usbcore: registered new interface driver hiddev
[ 3.967380] e100 0000:06:08.0: PME# disabled
[ 3.968718] e100: eth0: e100_probe: addr 0xfe401000, irq 20, MAC addr 00:13:20:95:42:90
[ 3.968796] ohci1394 0000:06:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.979707] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input4
[ 3.979817] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.3-1/input0
[ 3.979841] usbcore: registered new interface driver usbhid
[ 3.979845] usbhid: v2.6:USB HID core driver
[ 4.027092] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[fe400000-fe4007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 5.159792] PM: Starting manual resume from disk
[ 5.159797] PM: Resume from partition 8:3
[ 5.159800] PM: Checking hibernation image.
[ 5.159953] PM: Resume from disk failed.
[ 5.169063] EXT4-fs (sda2): barriers enabled
[ 5.183268] kjournald2 starting: pid 378, dev sda2:8, commit interval 5 seconds
[ 5.183281] EXT4-fs (sda2): delayed allocation enabled
[ 5.183287] EXT4-fs: file extents enabled
[ 5.185799] EXT4-fs: mballoc enabled
[ 5.185817] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 5.320281] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0013200000954290]
[ 5.535380] type=1505 audit(1266351714.127:2): operation="profile_load" pid=401 name=/usr/share/gdm/guest-session/Xsession
[ 5.538462] type=1505 audit(1266351714.131:3): operation="profile_load" pid=402 name=/sbin/dhclient3
[ 5.539234] type=1505 audit(1266351714.131:4): operation="profile_load" pid=402 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 5.539635] type=1505 audit(1266351714.131:5): operation="profile_load" pid=402 name=/usr/lib/connman/scripts/dhclient-script
[ 5.568818] type=1505 audit(1266351714.163:6): operation="profile_load" pid=403 name=/usr/bin/evince
[ 5.580731] type=1505 audit(1266351714.175:7): operation="profile_load" pid=403 name=/usr/bin/evince-previewer
[ 5.587721] type=1505 audit(1266351714.179:8): operation="profile_load" pid=403 name=/usr/bin/evince-thumbnailer
[ 5.603346] type=1505 audit(1266351714.195:9): operation="profile_load" pid=405 name=/usr/lib/cups/backend/cups-pdf
[ 5.604222] type=1505 audit(1266351714.199:10): operation="profile_load" pid=405 name=/usr/sbin/cupsd
[ 9.807327] Adding 530136k swap on /dev/sda3. Priority:-1 extents:1 across:530136k
[ 9.816253] udev: starting version 147
[ 9.870328] lp: driver loaded but no devices found
[ 9.912790] intel_rng: FWH not detected
[ 10.053784] EXT4-fs (sda2): internal journal on sda2:8
[ 10.115483] nvidia: module license 'NVIDIA' taints kernel.
[ 10.115491] Disabling lock debugging due to kernel taint
[ 10.149721] parport_pc 00:09: reported by Plug and Play ACPI
[ 10.149751] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 10.182764] psmouse serio1: ID: 10 00 64
[ 10.205039] Linux video capture interface: v2.00
[ 10.232265] lp0: using parport0 (interrupt-driven).
[ 10.354412] bttv: driver version 0.9.18 loaded
[ 10.354419] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 10.354486] bttv: Bt8xx card found (0).
[ 10.354503] bttv 0000:06:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 10.354518] bttv0: Bt848 (rev 18) at 0000:06:03.0, irq: 19, latency: 32, mmio: 0xd0400000
[ 10.376306] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
[ 10.376314] IRQ 19/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 10.376353] bttv0: gpio: en=00000000, out=00000000 in=00ff07ff [init]
[ 10.382345] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.382357] nvidia 0000:01:00.0: setting latency timer to 64
[ 10.382549] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
[ 10.398178] tveeprom 0-0050: Huh, no eeprom present (err=-6)?
[ 10.398185] bttv0: tuner type unset
[ 10.398288] bttv0: registered device video0
[ 10.398340] bttv0: registered device vbi0
[ 10.429777] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0)
[ 10.434111] ppdev: user-space parallel port driver
[ 10.442463] em28xx #0: chip ID is em2882/em2883
[ 10.461134] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.566379] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.566418] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.623249] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18
[ 10.623267] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00
[ 10.623283] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[ 10.623299] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00
[ 10.623314] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 10.623329] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 10.623344] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00
[ 10.623360] em28xx #0: i2c eeprom 70: 32 00 37 00 32 00 32 00 33 00 38 00 38 00 33 00
[ 10.623375] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00
[ 10.623390] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00
[ 10.623406] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89
[ 10.623421] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 4b 8f
[ 10.623436] em28xx #0: i2c eeprom c0: 0a f0 74 02 01 00 01 79 66 00 00 00 00 00 00 00
[ 10.623452] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89
[ 10.623467] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 4b 8f
[ 10.623482] em28xx #0: i2c eeprom f0: 0a f0 74 02 01 00 01 79 66 00 00 00 00 00 00 00
[ 10.623499] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x0a5f38dd
[ 10.623502] em28xx #0: EEPROM info:
[ 10.623504] em28xx #0: AC97 audio (5 sample rates)
[ 10.623507] em28xx #0: 500mA max power
[ 10.623510] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000
[ 10.624250] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18)
[ 10.625856] tveeprom 1-0050: Hauppauge model 65018, rev B2C0, serial# 692043
[ 10.625862] tveeprom 1-0050: tuner model is Xceive XC3028 (idx 120, type 71)
[ 10.625867] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
[ 10.625871] tveeprom 1-0050: audio processor is None (idx 0)
[ 10.625874] tveeprom 1-0050: has radio
[ 10.629403] tvp5150 1-005c: chip found @ 0xb8 (em28xx #0)
[ 10.646267] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 10.656104] tuner 1-0061: chip found @ 0xc2 (em28xx #0)
[ 10.685257] xc2028 1-0061: creating new instance
[ 10.685264] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[ 10.685277] usb 1-8: firmware: requesting xc3028-v27.fw
[ 10.703403] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 10.750719] xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 10.945975] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.016147] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 11.058659] __ratelimit: 3 callbacks suppressed
[ 11.058665] type=1505 audit(1266348119.651:12): operation="profile_replace" pid=951 name=/usr/share/gdm/guest-session/Xsession
[ 11.061151] type=1505 audit(1266348119.655:13): operation="profile_replace" pid=952 name=/sbin/dhclient3
[ 11.061886] type=1505 audit(1266348119.655:14): operation="profile_replace" pid=952 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 11.062285] type=1505 audit(1266348119.655:15): operation="profile_replace" pid=952 name=/usr/lib/connman/scripts/dhclient-script
[ 11.068177] type=1505 audit(1266348119.663:16): operation="profile_replace" pid=953 name=/usr/bin/evince
[ 11.080520] type=1505 audit(1266348119.675:17): operation="profile_replace" pid=953 name=/usr/bin/evince-previewer
[ 11.088262] type=1505 audit(1266348119.683:18): operation="profile_replace" pid=953 name=/usr/bin/evince-thumbnailer
[ 11.101075] type=1505 audit(1266348119.695:19): operation="profile_replace" pid=960 name=/usr/lib/cups/backend/cups-pdf
[ 11.102114] type=1505 audit(1266348119.695:20): operation="profile_replace" pid=960 name=/usr/sbin/cupsd
[ 11.106106] type=1505 audit(1266348119.699:21): operation="profile_replace" pid=964 name=/usr/sbin/tcpdump