heb een partitie van 1 gb als swap partitie
als ik dmesg doe vanuit livecd krijg ik dit:
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000003000 end: 000000003fff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000003fff3000 size: 000000000000d000 end: 0000000040000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x000f75e0
[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff74c0
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:8 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] Detected 1992.112 MHz processor.
[ 59.439564] Built 1 zonelists. Total pages: 260081
[ 59.439568] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 59.439749] mapped APIC to ffffd000 (fee00000)
[ 59.439751] mapped IOAPIC to ffffc000 (fec00000)
[ 59.439754] Enabling fast FPU save and restore... done.
[ 59.439756] Enabling unmasked SIMD FPU exception support... done.
[ 59.439765] Initializing CPU#0
[ 59.439816] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 59.441077] Console: colour VGA+ 80x25
[ 59.441543] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 59.442386] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 59.467599] Memory: 1028188k/1048512k available (1992k kernel code, 19652k reserved, 893k data, 328k init, 131008k highmem)
[ 59.467609] virtual kernel memory layout:
[ 59.467610] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 59.467611] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 59.467613] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 59.467614] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 59.467615] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 59.467616] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 59.467618] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 59.467621] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 59.543817] Calibrating delay using timer specific routine.. 3987.21 BogoMIPS (lpj=7974439)
[ 59.543860] Security Framework v1.0.0 initialized
[ 59.543867] SELinux: Disabled at boot.
[ 59.543883] Mount-cache hash table entries: 512
[ 59.544028] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 59.544036] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 59.544039] CPU: L2 Cache: 256K (64 bytes/line)
[ 59.544042] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 59.544052] Compat vDSO mapped to ffffe000.
[ 59.544057] Remapping vsyscall page to ffffe000
[ 59.544066] Checking 'hlt' instruction... OK.
[ 59.559934] SMP alternatives: switching to UP code
[ 59.560164] Freeing SMP alternatives: 11k freed
[ 59.560378] Early unpacking initramfs... done
[ 59.861641] ACPI: Core revision 20060707
[ 59.868237] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 59.870921] CPU0: AMD Athlon(tm) stepping 01
[ 59.870941] Total of 1 processors activated (3987.21 BogoMIPS).
[ 59.871133] ENABLING IO-APIC IRQs
[ 59.871319] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 60.015842] Brought up 1 CPUs
[ 60.016066] Booting paravirtualized kernel on bare hardware
[ 60.016136] Time: 20:59:21 Date: 04/10/107
[ 60.016166] NET: Registered protocol family 16
[ 60.016255] EISA bus registered
[ 60.016259] ACPI: bus type pci registered
[ 60.047941] PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=3
[ 60.047943] PCI: Using configuration type 1
[ 60.047945] Setting up standard PCI resources
[ 60.059830] ACPI: Interpreter enabled
[ 60.059834] ACPI: Using IOAPIC for interrupt routing
[ 60.060398] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 60.060403] PCI: Probing PCI hardware (bus 00)
[ 60.060639] PCI: nForce2 C1 Halt Disconnect fixup
[ 60.061504] Boot video device is 0000:03:00.0
[ 60.061592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 60.121477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 60.121974] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 60.122173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB1._PRT]
[ 60.123047] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 60.123328] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 60.123607] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 60.123898] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 60.124177] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 60.124458] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 60.124736] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 60.125015] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 60.125293] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 60.125572] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 60.125855] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 60.126138] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 60.126415] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 60.126696] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 60.126975] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 60.127257] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 60.127518] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 60.127763] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[ 60.128018] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[ 60.128262] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[ 60.128505] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 60.128823] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[ 60.129145] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[ 60.129462] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[ 60.129776] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 60.130089] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[ 60.130403] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 60.130651] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[ 60.130963] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[ 60.131278] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 60.131591] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 60.131913] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 60.135133] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 60.135145] pnp: PnP ACPI init
[ 60.140755] pnp: PnP ACPI: found 16 devices
[ 60.140760] PnPBIOS: Disabled by ACPI PNP
[ 60.140809] PCI: Using ACPI for IRQ routing
[ 60.140816] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 60.197734] NET: Registered protocol family 8
[ 60.197736] NET: Registered protocol family 20
[ 60.198311] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[ 60.198314] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[ 60.198317] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[ 60.198320] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[ 60.198323] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[ 60.198325] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[ 60.198331] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[ 60.198333] pnp: 00:01: ioport range 0x5500-0x553f has been reserved
[ 60.198618] PCI: Bridge: 0000:00:08.0
[ 60.198621] IO window: a000-bfff
[ 60.198626] MEM window: ec000000-edffffff
[ 60.198630] PREFETCH window: 50000000-500fffff
[ 60.198635] PCI: Bridge: 0000:00:0c.0
[ 60.198637] IO window: c000-cfff
[ 60.198641] MEM window: e8000000-e9ffffff
[ 60.198645] PREFETCH window: 50100000-501fffff
[ 60.198650] PCI: Bridge: 0000:00:1e.0
[ 60.198652] IO window: d000-dfff
[ 60.198656] MEM window: ea000000-ebffffff
[ 60.198660] PREFETCH window: c0000000-dfffffff
[ 60.198670] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 60.198676] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 60.198705] NET: Registered protocol family 2
[ 60.235873] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 60.236045] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 60.237286] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 60.237918] TCP: Hash tables configured (established 131072 bind 65536)
[ 60.237922] TCP reno registered
[ 60.247933] checking if image is initramfs... it is
[ 60.823052] Freeing initrd memory: 6966k freed
[ 60.823487] audit: initializing netlink socket (disabled)
[ 60.823500] audit(1178830761.468:1): initialized
[ 60.823560] highmem bounce pool size: 64 pages
[ 60.823615] VFS: Disk quotas dquot_6.5.1
[ 60.823636] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 60.823682] io scheduler noop registered
[ 60.823684] io scheduler anticipatory registered
[ 60.823687] io scheduler deadline registered
[ 60.823694] io scheduler cfq registered (default)
[ 60.823980] isapnp: Scanning for PnP cards...
[ 61.178390] isapnp: No Plug & Play device found
[ 61.204806] Real Time Clock Driver v1.12ac
[ 61.204855] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 61.204979] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 61.205195] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 61.205804] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 61.206117] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 61.206387] mice: PS/2 mouse device common for all mice
[ 61.206896] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 61.207114] input: Macintosh mouse button emulation as /class/input/input0
[ 61.207145] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 61.207149] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 61.207358] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 61.207360] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 61.460181] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 61.460343] EISA: Probing bus 0 at eisa.0
[ 61.460364] Cannot allocate resource for EISA slot 4
[ 61.460367] Cannot allocate resource for EISA slot 5
[ 61.460382] EISA: Detected 0 cards.
[ 61.490466] TCP cubic registered
[ 61.490472] NET: Registered protocol family 1
[ 61.490492] Using IPI No-Shortcut mode
[ 61.490550] ACPI: (supports S0 S1 S4 S5)
[ 61.490596] Magic number: 7:309:1003
[ 61.490604] hash matches device ttye2
[ 61.490747] hash matches device vcs
[ 61.490756] hash matches device 00:05
[ 61.491049] Freeing unused kernel memory: 328k freed
[ 61.491742] Time: tsc clocksource has been installed.
[ 61.510228] input: AT Translated Set 2 keyboard as /class/input/input1
[ 62.714853] Capability LSM initialized
[ 63.258930] usbcore: registered new interface driver usbfs
[ 63.258953] usbcore: registered new interface driver hub
[ 63.258977] usbcore: registered new device driver usb
[ 63.259729] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 63.260121] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 63.260129] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
[ 63.260142] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 63.260145] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 63.260280] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 63.260299] ohci_hcd 0000:00:02.0: irq 16, io mem 0xee086000
[ 63.293656] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 63.334038] ieee1394: Initialized config rom entry `ip1394'
[ 63.346060] usb usb1: configuration #1 chosen from 1 choice
[ 63.346086] hub 1-0:1.0: USB hub found
[ 63.346097] hub 1-0:1.0: 3 ports detected
[ 63.382058] SCSI subsystem initialized
[ 63.387106] libata version 2.20 loaded.
[ 63.448280] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[ 63.448289] ACPI: PCI Interrupt 0000:00:02.1
-> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
[ 63.448306] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 63.448309] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 63.448339] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 63.448356] ohci_hcd 0000:00:02.1: irq 17, io mem 0xee081000
[ 63.498406] Floppy drive(s): fd0 is 1.44M
[ 63.505890] usb usb2: configuration #1 chosen from 1 choice
[ 63.505916] hub 2-0:1.0: USB hub found
[ 63.505928] hub 2-0:1.0: 3 ports detected
[ 63.549544] FDC 0 is a post-1991 82077
[ 63.608335] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 63.608344] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18
[ 63.608356] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 63.608359] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 63.608383] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 63.608418] ehci_hcd 0000:00:02.2: debug port 1
[ 63.608423] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 63.608433] ehci_hcd 0000:00:02.2: irq 18, io mem 0xee082000
[ 63.608441] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 63.608512] usb usb3: configuration #1 chosen from 1 choice
[ 63.608537] hub 3-0:1.0: USB hub found
[ 63.608545] hub 3-0:1.0: 6 ports detected
[ 63.713132] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 63.713137] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16
[ 63.713144] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 63.923786] end_request: I/O error, dev fd0, sector 0
[ 64.232981] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
[ 64.233103] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[ 64.233124] NFORCE2: chipset revision 162
[ 64.233127] NFORCE2: not 100% native mode: will probe irqs later
[ 64.233131] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
[ 64.233137] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[ 64.233146] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 64.233158] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[ 64.233165] Probing IDE interface ide0...
[ 64.519889] hda: Maxtor 6Y120P0, ATA DISK drive
[ 64.667776] usb 3-6: new high speed USB device using ehci_hcd and address 4
[ 64.800186] usb 3-6: configuration #1 chosen from 1 choice
[ 64.967792] end_request: I/O error, dev fd0, sector 0
[ 65.103777] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 65.192841] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 65.208528] Probing IDE interface ide1...
[ 65.318388] usb 2-1: configuration #1 chosen from 1 choice
[ 65.623777] usb 1-3: new full speed USB device using ohci_hcd and address 3
[ 65.836359] usb 1-3: configuration #1 chosen from 1 choice
[ 65.839334] hub 1-3:1.0: USB hub found
[ 65.842291] hub 1-3:1.0: 4 ports detected
[ 65.943894] hdc: _NEC DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive
[ 65.974252] usbcore: registered new interface driver hiddev
[ 65.980260] input: Logitech USB Receiver as /class/input/input2
[ 65.980273] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.1-1
[ 65.991291] input: Logitech USB Receiver as /class/input/input3
[ 65.991325] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-1
[ 65.991341] usbcore: registered new interface driver usbhid
[ 65.991344] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 66.011797] end_request: I/O error, dev fd0, sector 0
[ 66.616703] ide1 at 0x170-0x177,0x376 on irq 15
[ 66.627383] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
[ 66.627389] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 21 (level, high) -> IRQ 17
[ 66.627396] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 66.680976] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[ee083000-ee0837ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 66.686123] pata_pdc2027x 0000:01:09.0: version 0.8
[ 66.686341] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 66.686350] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 19
[ 66.785657] pata_pdc2027x 0000:01:09.0: PLL input clock 16585 kHz
[ 66.816864] ata1: PATA max UDMA/100 cmd 0xf89a97c0 ctl 0xf89a9fda bmdma 0xf89a9000 irq 19
[ 66.816896] ata2: PATA max UDMA/100 cmd 0xf89a95c0 ctl 0xf89a9dda bmdma 0xf89a9008 irq 19
[ 66.816910] scsi0 : pata_pdc2027x
[ 66.825006] hda: max request size: 128KiB
[ 66.834972] hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
[ 66.836377] hda: cache flushes supported
[ 66.836427] hda: hda1 hda2 < hda5 hda6 > hda3 hda4
[ 66.869642] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 66.869651] Uniform CD-ROM driver Revision: 3.20
[ 66.983446] ATA: abnormal status 0x8 on port 0xf89a97df
[ 66.983494] scsi1 : pata_pdc2027x
[ 67.055787] end_request: I/O error, dev fd0, sector 0
[ 67.151466] ATA: abnormal status 0x8 on port 0xf89a95df
[ 67.152993] ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 20
[ 67.152998] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [AP3C] -> GSI 20 (level, high) -> IRQ 18
[ 67.153008] 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
[ 67.153014] 0000:02:01.0: 3Com PCI 3c920 Tornado at f89a6000.
[ 67.249444] kjournald starting. Commit interval 5 seconds
[ 67.249455] EXT3-fs: mounted filesystem with ordered data mode.
[ 67.278394] kjournald starting. Commit interval 5 seconds
[ 67.278406] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.355783] end_request: I/O error, dev fd0, sector 0
[ 68.417300] kjournald starting. Commit interval 5 seconds
[ 68.417312] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.425662] kjournald starting. Commit interval 5 seconds
[ 68.425674] EXT3-fs: mounted filesystem with ordered data mode.
[ 69.483784] end_request: I/O error, dev fd0, sector 0
[ 69.545248] kjournald starting. Commit interval 5 seconds
[ 69.545261] EXT3-fs: mounted filesystem with ordered data mode.
[ 69.554520] kjournald starting. Commit interval 5 seconds
[ 69.554532] EXT3-fs: mounted filesystem with ordered data mode.
[ 70.611785] end_request: I/O error, dev fd0, sector 0
[ 70.674320] kjournald starting. Commit interval 5 seconds
[ 70.674332] EXT3-fs: mounted filesystem with ordered data mode.
[ 70.682768] kjournald starting. Commit interval 5 seconds
[ 70.682780] EXT3-fs: mounted filesystem with ordered data mode.
[ 71.739783] end_request: I/O error, dev fd0, sector 0
[ 71.802438] kjournald starting. Commit interval 5 seconds
[ 71.802449] EXT3-fs: mounted filesystem with ordered data mode.
[ 71.811148] kjournald starting. Commit interval 5 seconds
[ 71.811159] EXT3-fs: mounted filesystem with ordered data mode.
[ 74.961109] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 75.005858] ISO 9660 Extensions: RRIP_1991A
[ 75.043760] Registering unionfs 20060916-2203
[ 75.043765] unionfs: debugging is not enabled
[ 75.050049] loop: loaded (max 8 devices)
[ 75.166320] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[ 128.260353] eth1: setting half-duplex.
[ 128.334156] eth0: no link during initialization.
[ 129.490528] Linux agpgart interface v0.102 (c) Dave Jones
[ 129.706338] agpgart: Detected NVIDIA nForce2 chipset
[ 129.713020] agpgart: AGP aperture is 128M @ 0xe0000000
[ 129.852768] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 129.852807] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
[ 130.218700] NET: Registered protocol family 17
[ 130.305002] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 130.965251] input: PC Speaker as /class/input/input4
[ 130.971224] parport: PnPBIOS parport detected.
[ 130.971285] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 131.022018] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 132.193680] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 132.193686] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 16
[ 132.193712] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 132.332255] p54: LM86 firmware
[ 132.605273] intel8x0_measure_ac97_clock: measured 62600 usecs
[ 132.605278] intel8x0: clocking to 48000
[ 134.551767] prism54usb: eeprom read failed!
[ 134.551783] prism54usb: probe of 3-6:1.0 failed with error -22
[ 134.551796] usbcore: registered new interface driver prism54usb
[ 134.799472] fuse init (API version 7.8)
[ 135.229299] Adding 979892k swap on /dev/hda6. Priority:-1 extents:1 across:979892k
[ 141.317490] input: Power Button (FF) as /class/input/input5
[ 141.321939] ACPI: Power Button (FF) [PWRF]
[ 141.361971] input: Power Button (CM) as /class/input/input6
[ 141.366385] ACPI: Power Button (CM) [PWRB]
[ 141.409531] No dock devices found.
[ 141.432461] Using specific hotkey driver
[ 141.490074] ibm_acpi: ec object not found
[ 141.650356] pcc_acpi: loading...
[ 153.788086] [drm] Initialized drm 1.1.0 20060810
[ 153.829639] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 153.829650] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 20
[ 153.832588] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 153.932604] lp0: using parport0 (interrupt-driven).
[ 153.978585] ppdev: user-space parallel port driver
[ 155.584125] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 155.584255] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[ 155.584414] agpgart: Putting AGP V3 device at 0000:03:00.0 into 4x mode
[ 156.002910] [drm] Setting GART location based on new memory map
[ 156.002922] [drm] Loading R300 Microcode
[ 156.002971] [drm] writeback test succeeded in 1 usecs
[ 163.461745] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 163.461750] apm: overridden by ACPI.
[ 167.179079] Bluetooth: Core ver 2.11
[ 167.179156] NET: Registered protocol family 31
[ 167.179159] Bluetooth: HCI device and connection manager initialized
[ 167.179162] Bluetooth: HCI socket layer initialized
[ 167.405192] Bluetooth: L2CAP ver 2.8
[ 167.405197] Bluetooth: L2CAP socket layer initialized
[ 167.640704] Bluetooth: RFCOMM socket layer initialized
[ 167.640719] Bluetooth: RFCOMM TTY layer initialized
[ 167.640721] Bluetooth: RFCOMM ver 1.8
[ 173.659001] NET: Registered protocol family 10
[ 173.659108] lo: Disabled Privacy Extensions
[ 173.659170] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 173.659172] ADDRCONF(NETDEV_UP): eth1: link is not ready
of moet ik naar een bepaalde file op de harde schrijf kijken, want dit krijg ik als ik dmesg intype in console