Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: extern benaderbaar  (gelezen 3870 keer)

extern benaderbaar
« Gepost op: 2010/05/16, 11:33:56 »
hoi,

ik heb mijn ubuntu desktop ingesteld als server (met grafische omgeving)
binnen het interne netwerk werkt alles prima
- bureaublad met de standaar extern bureaublad onder systeem-voorkeuren (geeft aan dat alleen intern         netwerk benaderbaar is)
- bestanden delen met samba
- media server met java

nu wil ik mijn bureaublad en bestanden ook van buiten mijn netwerk benaderen hoe?
en hoe stel ik de firewol goed in?
weer terug van weg geweest gebruik ubuntu 12.04 weer

Re: extern benaderbaar
« Reactie #1 Gepost op: 2010/05/16, 13:58:14 »
hoi,

ik heb mijn ubuntu desktop ingesteld als server (met grafische omgeving)
binnen het interne netwerk werkt alles prima
- bureaublad met de standaar extern bureaublad onder systeem-voorkeuren (geeft aan dat alleen intern         netwerk benaderbaar is)
- bestanden delen met samba
- media server met java

nu wil ik mijn bureaublad en bestanden ook van buiten mijn netwerk benaderen hoe?
en hoe stel ik de firewol goed in?

Op welke manier is die computer verbonden met het internet?
Als dat via een router is dan moet je zien dat die computer van de router een vast ip krijgt, en dat de router de poorten die je nodig heeft doorstuurt naar dat ip.
Denk eraan dat de meeste ISP's de samba-poort voor de veiligheid van hun gebruikers blokkeren. Je zou samba dus op een andere poort kunnen instellen. Dat zou ik echter niet doen, maar voor ssh kiezen. Daarmee kan je ook vanop andere computers aan je bestanden geraken.
In deze opstelling is een firewall niet echt nodig, omdat je router enkel de poorten die open mogen staan open zet, en de rest normaal gezien dicht doet.
http://leerubuntu.org (ubuntu zonder moeilijke woorden)
VoidWarranties (Hackerspace) Antwerpen
Microsoft isn't evil, they just make really crappy operating systems. - Linus Torvalds

Re: extern benaderbaar
« Reactie #2 Gepost op: 2010/05/16, 14:17:03 »
 
Citaat

Op welke manier is die computer verbonden met het internet?
Als dat via een router is dan moet je zien dat die computer van de router een vast ip krijgt, en dat de router de poorten die je nodig heeft doorstuurt naar dat ip.


hoe weet ik welke poort nummer er open moet?
op de router een poort open doen is geen probleem.


Denk eraan dat de meeste ISP's de samba-poort voor de veiligheid van hun gebruikers blokkeren. Je zou samba dus op een andere poort kunnen instellen. Dat zou ik echter niet doen, maar voor ssh kiezen. Daarmee kan je ook vanop andere computers aan je bestanden geraken.
In deze opstelling is een firewall niet echt nodig, omdat je router enkel de poorten die open mogen staan open zet, en de rest normaal gezien dicht doet.

ssh heb ik eens geprobeerd maar win kan daar niet goed mee omgaan.
hoe kan ik die samba instellen met poort nummer enzo?
weer terug van weg geweest gebruik ubuntu 12.04 weer

Offline ivo

  • Lid
Re: extern benaderbaar
« Reactie #3 Gepost op: 2010/05/16, 16:22:52 »

Citaat

Op welke manier is die computer verbonden met het internet?
Als dat via een router is dan moet je zien dat die computer van de router een vast ip krijgt, en dat de router de poorten die je nodig heeft doorstuurt naar dat ip.


hoe weet ik welke poort nummer er open moet?
op de router een poort open doen is geen probleem.


Denk eraan dat de meeste ISP's de samba-poort voor de veiligheid van hun gebruikers blokkeren. Je zou samba dus op een andere poort kunnen instellen. Dat zou ik echter niet doen, maar voor ssh kiezen. Daarmee kan je ook vanop andere computers aan je bestanden geraken.
In deze opstelling is een firewall niet echt nodig, omdat je router enkel de poorten die open mogen staan open zet, en de rest normaal gezien dicht doet.

ssh heb ik eens geprobeerd maar win kan daar niet goed mee omgaan.
hoe kan ik die samba instellen met poort nummer enzo?

Welke poorten er open moeten hangt helemaal af van wat je wilt doen.
Als je met telnet naar je PC wilt zal je poort 23 moeten openzetten, HTTP=80 (of je hebt je webserver mogelijk op een andere poort draaien?), SSH=22, ftp = 21, enzovoorts....

Als je Putty op je windows gebruikt dan werkt SSH prima. Ik gebruik dat zelf, en miljoenen anderen, ook. Tevens kun je in Putty X11 forwarding aanzetten. Als je dan op je Windows een X-server installeert (bijvoorbeeld de gratis verkrijgbare http://sourceforge.net/projects/xming/ ) kun je grafische applicaties vanaf je Linux bak door de SSH tunnel op je Windows laten draaien.

There are only 10 types of people in the world; those who understand binary and those who don't.

Re: extern benaderbaar
« Reactie #4 Gepost op: 2010/05/16, 18:59:32 »
via ssh en putty is dat dan hetzelfde als in verkenner?
is er een goede (ndl) handleiding?
« Laatst bewerkt op: 2010/05/16, 19:20:04 door pcschouten »
weer terug van weg geweest gebruik ubuntu 12.04 weer

Re: extern benaderbaar
« Reactie #5 Gepost op: 2010/05/17, 19:15:11 »
ik krijg de configuratie niet goed
weer terug van weg geweest gebruik ubuntu 12.04 weer

Re: extern benaderbaar
« Reactie #6 Gepost op: 2010/05/18, 06:22:54 »
kan iemand mij vertellen hoe ik die putty en grafische ding moet configureren?

ik wil op mijn bestanden kunnen (mappen,muziek enzo)
weer terug van weg geweest gebruik ubuntu 12.04 weer

Re: extern benaderbaar
« Reactie #7 Gepost op: 2010/05/18, 10:08:26 »
kan iemand mij vertellen hoe ik die putty en grafische ding moet configureren?

ik wil op mijn bestanden kunnen (mappen,muziek enzo)
Dan heb je putty voor niets nodig, probeer  winscp.
http://leerubuntu.org (ubuntu zonder moeilijke woorden)
VoidWarranties (Hackerspace) Antwerpen
Microsoft isn't evil, they just make really crappy operating systems. - Linus Torvalds

Re: extern benaderbaar
« Reactie #8 Gepost op: 2010/05/18, 11:07:26 »
kan iemand mij vertellen hoe ik die putty en grafische ding moet configureren?

ik wil op mijn bestanden kunnen (mappen,muziek enzo)
Dan heb je putty voor niets nodig, probeer  winscp.

dit gaat wel via ssh?
weer terug van weg geweest gebruik ubuntu 12.04 weer

Offline Rachid

  • Lid
    • rachidbm
    • Mijn blog
Re: extern benaderbaar
« Reactie #9 Gepost op: 2010/05/18, 11:25:50 »
Ja
Ben je ook blij dat Ubuntu zo toegankelijk en gratis is, en wil je graag net als ik iets terugdoen, kijk dan eens rond bij mwanzo, dé poort naar het bijdragen aan Ubuntu en haar gemeenschap!

Re: extern benaderbaar
« Reactie #10 Gepost op: 2010/05/18, 11:45:29 »
gelukt

kan ik ook media streamen zonder te hoeven kopieren?
kan ik met dat prog ook mijn bureaublad overnemen? en hoe?
« Laatst bewerkt op: 2010/05/18, 12:07:05 door pcschouten »
weer terug van weg geweest gebruik ubuntu 12.04 weer

Offline tigger

  • Lid
Re: extern benaderbaar
« Reactie #11 Gepost op: 2010/05/18, 19:23:36 »
Via ssh kun je geen media streamen, dan zul je een andere optie moeten zoeken. (Voor de experts, ja het kan misschien wel via sshfs)

Wat gebruik je eigenlijk nu om je desktop over te nemen als je thuis bent? Als je dat middels een terminal server client/remote desktop is dan kun je misschien die poort openzetten op je router en zorgen dat je audio meegaat in je sessie. Gebruik je iets anders, misschien zou je je eens moeten verdiepen in een VPN, goed opgezet geeft dat je dezelfde mogelijkheden alsof je thuis zit.


O ja, winscp, oftewel windows client voor scp, werkt puur en enkel over ssh. Scp is een onderdeel van ssh en sftp is daar ook onderdeel van.
LPI-1, NCLA, RHCE, RHCVA

Re: extern benaderbaar
« Reactie #12 Gepost op: 2010/05/18, 19:52:41 »
Via ssh kun je geen media streamen, dan zul je een andere optie moeten zoeken. (Voor de experts, ja het kan misschien wel via sshfs)

Wat gebruik je eigenlijk nu om je desktop over te nemen als je thuis bent? Als je dat middels een terminal server client/remote desktop is dan kun je misschien die poort openzetten op je router en zorgen dat je audio meegaat in je sessie. Gebruik je iets anders, misschien zou je je eens moeten verdiepen in een VPN, goed opgezet geeft dat je dezelfde mogelijkheden alsof je thuis zit.


ik gebruik tight vnc om de bureaublad over te nemen momenteel.
op de server heb ik de standaart buraublad op afstand aan staan.

ik las ook iets over samba share over ssh is dit mogelijk?


ik wil gewoon mijn mappen/bestanden etc. kunnen openen net als thuis via samba
« Laatst bewerkt op: 2010/05/18, 20:10:23 door pcschouten »
weer terug van weg geweest gebruik ubuntu 12.04 weer

Offline tigger

  • Lid
Re: extern benaderbaar
« Reactie #13 Gepost op: 2010/05/18, 20:48:07 »
Al eens zelf gezocht op samba en ssh? Het is mogelijk volgens diverse bronnen.
Ik heb er twee voor je uitgelicht.

Een uitgebreide met de mogelijkheid tot keys
Een eenvoudige klik en klaar oplossing

Dezelfde truuk kun je ook uithalen met je vnc-viewer, wel eerst ff bepalen welke poort je gebruikt 5800 voor web/java en 5900 voor de native viewer, als ik de poorten goed heb.
De twee links zijn wel in het engels. De tweede levert snel resultaat, de eerste een hoop stof tot nadenken  ;)
LPI-1, NCLA, RHCE, RHCVA

Re: extern benaderbaar
« Reactie #14 Gepost op: 2010/05/18, 22:24:21 »
ik heb de 2e link helemaal gevolgt alleen mijn eigen ip ingevuld maar hij wil niet vanaf stap mount samba
weer terug van weg geweest gebruik ubuntu 12.04 weer

Offline tigger

  • Lid
Re: extern benaderbaar
« Reactie #15 Gepost op: 2010/05/19, 08:21:54 »
Bij de samba mount stap, moet je 127.0.0.1 of localhost invullen. Ik weet niet of je dat doet. Je creert namelijk een ssh-tunnel. Putty luistert op je windows werkstation naar de poort (139), stuurt dit vervolgens via de ssh-sessie naar je server op poort 139.
Poort 139 wordt gebruikt voor samba, maar soms kunnen er meer poorten nodig zijn. Hier staan alle vastgelegde poort nummers.
LPI-1, NCLA, RHCE, RHCVA

Re: extern benaderbaar
« Reactie #16 Gepost op: 2010/05/19, 18:57:53 »
het wil maar niet lukken het volgende heb ik gedaan

1 netwerkadapter aanpassen zoals beschreven
2 in putty alles gedaan zoals beschreven alleen dan met mijn extern ip
dit lukt allemaal krijg de command line enzovoor.

maar in win7 lukt het me niet om te verbinden naar samba.

iemand id?
weer terug van weg geweest gebruik ubuntu 12.04 weer

Re: extern benaderbaar
« Reactie #17 Gepost op: 2010/05/19, 21:55:34 »
accepteert samba eigenlijk wel dat ik via ssh inlog?

ik heb de standaard configuratie
weer terug van weg geweest gebruik ubuntu 12.04 weer

Offline tigger

  • Lid
Re: extern benaderbaar
« Reactie #18 Gepost op: 2010/05/20, 08:03:04 »
Hmmm, je hebt niet toevallig ergens in je samba configuratie staan dat ie bepaalde netwerken moet uitsluiten? Of juist op bepaalde netwerken moet luisteren?
LPI-1, NCLA, RHCE, RHCVA

Re: extern benaderbaar
« Reactie #19 Gepost op: 2010/05/20, 08:14:00 »
hoe kan ik dat zien?

gebruik je zelf ook dit systeem zo ja zou ik dan je instellingen mogen wete?
weer terug van weg geweest gebruik ubuntu 12.04 weer

Offline tigger

  • Lid
Re: extern benaderbaar
« Reactie #20 Gepost op: 2010/05/20, 08:38:59 »
in /etc/samba/smb.conf staat de configuratie van samba. Je kan zoeken in dat bestand naar listen.
Ik kwam trouwens ook nog iets tegen dat poort 445 ook nog gebruikt wordt sinds een enkel jaar. Als je die ook openzet in de tunnel, net zoals 139, heb je misschien ook met win 7 succes.

Werkt het trouwens wel met een XP-machine?
LPI-1, NCLA, RHCE, RHCVA

Re: extern benaderbaar
« Reactie #21 Gepost op: 2010/05/20, 08:56:50 »
dit is mijn conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = workgroup

# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
; encrypt passwords = yes

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
; passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
username map = /etc/samba/smbusers
security = user
; guest ok = no
; guest account = nobody

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares.  This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.  Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
; guest ok = no
; read only = yes
create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
; browseable = yes
writeable = yes
guest ok = yes
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

[download]
comment = download
path = /media/download
; writeable = No
; browseable = yes
guest ok = yes

[muziek]
comment = muziek
path = /media/sdc2
; writeable = No
; browseable = yes
guest ok = yes

[films1]
path = /media/sdc1
; writeable = No
; browseable = yes
guest ok = yes

[back up peter]
path = /home/peter/Documenten/back up peter
writeable = yes
; browseable = yes
valid users = peter

ik kan die listen niet vinden wil jij ff kijken?
weer terug van weg geweest gebruik ubuntu 12.04 weer

Offline tigger

  • Lid
Re: extern benaderbaar
« Reactie #22 Gepost op: 2010/05/21, 08:47:44 »
Het is interfaces, maar die is in jouw config uitgecommentarieerd. Hij luistert dus op alles. Heb je al geprobeerd om die poort 445 te tunnelen?
LPI-1, NCLA, RHCE, RHCVA