Misschien alvast handig om te vermelden wat voor computer het is. ??
Leeftijd en wat voor Harddisk je erin gestopt hebt..
Wat ik wel verwarrend vind is dat hetgeen Pjotr zegt over foutmelding 18 volledig anders is dan welke ik uit de officiele handleiding haal
?
Pjotr zegt.
Error 18: Fout of niet-ondersteund executable-formaat
Bij Linux betekent dit meestal dat de kernel corrupt is, of dat u probeert op te starten van iets wat geen kernel is. Controleer op tikfouten. Kijk ook of de partities niet veranderd zijn door gebruik van bijvoorbeeld GParted.
In de officiele handleiding staat:
18 : Selected cylinder exceeds maximum supported by BIOS
This error is returned when a read is attempted at a linear block address beyond the end of the BIOS translated area. This generally happens if your disk is larger than the BIOS can handle (512MB for (E)IDE disks on older machines or larger than 8GB in general).
Wat dus zoveel inhoud dat de bios de geplaatste harddisk niet ondersteund kwa grote.
Soms wil een bios update uitkomst bieden hiervoor, indien dit nog mogelijk is.
Je kan ook een kleine partitie maken op het begin van de harddisk (mag ongeveer 200Mb zijn) en daar de bootflag zetten en dus ook de kernel en grub installeren.
Als je maar binnen de 1023 cylinders blijft met die partitie.
De kernel zelf heeft namelijk totaal geen moeite om grote harddisken te lezen.
Het volledige verhaal:
Error 18
Error 18: Selected cylinder exceeds maximum supported by BIOS
This error is returned when a read is attempted at a linear block address beyond the end of the BIOS translated area. This generally happens if your disk is larger than the BIOS can handle (512MB for (E)IDE disks on older machines or larger than 8GB on others.). In more practical terms this means the BIOS is unable to start executing the kernel because the kernel is not located within the block it can access at boot up time.
This can be circumvented by creating a boot partition at the beginning of the disk that is completely within the first 1023 cylinders of the harddrive. This partition will contain the kernel.
The kernel itself does not suffer from the same limitations as the BIOS so after the BIOS has loaded the kernel the kernel will have no problem accessing the whole harddrive. Newer BIOSes will automatically translate the harddrives size in a way that it can be completely contained within the first 1023 cylinders and hence modern computers do not suffer from this problem.
The same error can happen when the BIOS detects a disk in a different way as Linux does. This can happen when changing motherboards or when moving a GRUB-bootable disk from one computer to another. If this happens, just boot with a GRUB floppy, read the C/H/S numbers from the existing partition table and manually edit the BIOS numbers to match. If using a SUSE linux and installing on VM Ware this problem is solved by creating a small partition at the very beginning of the harddisc, and mounting it as /boot.