Hey, het is weer eens zover Xorg.conf doet vreemde dingen...
ik heb net een nieuw tft schermpje, wil hem in ubuntu op 1680x1050 zetten maar krijg dat met geen mogelijkheid voor elkaar.
Via Systeem-Voorkeuren-Schermresolutie kan ik niet hoger dan 800x600 en via Overige/Schermen en weergave precies hetzelfde verhaal. Ik had eerst een complete waslijst aan mogelijkheden maar zelfs als ik handmatig in xorg.conf 1680x1050 toevoegde kon ik deze niet kiezen (er stond ook een hoop rommel in mn xorg.conf) dus koos ik voor de rigoureuze weg: " rm /etc/X11/xorg.conf" waarna ik de resolutie meteen instelde op 1680x1050 via overige/Schermen en weergave. Hiervoor moest x opnieuw worden gestart, en sinds ik dat gedaan heb krijg ik niets voor elkaar. Het vreemde is dat xorg.conf er prima uit lijkt te zien:
# Fallback X.org config file
# FIXME: include the wacom devices (would only add noise at the current
# development stage)
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
screen 0 "screen1" 0 0
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection
Section "device" #
Identifier "device1"
Boardname "NVIDIA GeForce FX (generic)"
Busid "PCI:1:0:0"
Driver "nv"
Screen 0
Vendorname "NVIDIA"
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
SubSection "Display"
Depth 24
Modes "1680x1050@75" "1920x1200@60" "1680x1050@60" "1600x1024@60" "1440x900@60" "1440x900@75" "1280x800@60" "1280x768@75" "1280x800@75" "1280x768@60" "800x600@75" "800x600@72"
EndSubSection
EndSection
Section "monitor" #
Identifier "monitor1"
Vendorname "Acer Incorporated"
Modelname "Acer LCD Monitor X223W"
Horizsync 47.0-84.0
Vertrefresh 56.0-76.0
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "1280x768@60" 80.14 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
modeline "1280x800@75" 107.21 1280 1360 1496 1712 800 801 804 835 -hsync +vsync
modeline "1280x768@75" 102.98 1280 1360 1496 1712 768 769 772 802 -hsync +vsync
modeline "1280x800@60" 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
modeline "1440x900@75" 136.49 1440 1536 1688 1936 900 901 904 940 -hsync +vsync
modeline "1440x900@60" 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync
modeline "1600x1024@60" 136.36 1600 1704 1872 2144 1024 1025 1028 1060 -hsync +vsync
modeline "1680x1050@60" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync
modeline "1680x1050@75" 188.07 1680 1800 1984 2288 1050 1051 1054 1096 -hsync +vsync
modeline "1920x1200@60" 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -hsync +vsync
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection
Wie heeft een idee wat ik fout doe/heb gedaan??