Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Software voor SyncMaster 940n  (gelezen 2300 keer)

Offline Hanssun

  • Lid
Software voor SyncMaster 940n
« Gepost op: 2007/08/04, 22:15:58 »
Hallo mensen,

Ik heb een lcd beeldscherm van Samsung de SyncMaster 940n nu wil ik drivers toevoegen mijn systeem is Ubuntu 7.04 "Feisty Fawn" maar kan niks vinden ., weet iemand hoe ik die kan binnen halen.

Gr Hans

Software voor SyncMaster 940n
« Reactie #1 Gepost op: 2007/08/04, 22:54:20 »
Je hoeft geen drivers binnen te halen. Het enige wat waarschijnlijk moet gebeuren is het (opnieuw) configureren van de videokaart-driver. Is de monitor al aangesloten? (en zijn er problemen mee?)

Kan je misschien een terminal* openen, en de uitvoer van het volgende commando hier tonen:

cat /etc/X11/xorg.conf

(Gewoon via copy&paste, als je het met de hand intikt let er dan op dat er 1 hoofdletter X in zit.)


* die kan je vinden in de menus: Applications-->Accessories-->Terminal (of toepassingen-->hulpmiddelen-->terminal venster o.i.d.).

Offline Hanssun

  • Lid
Software voor SyncMaster 940n
« Reactie #2 Gepost op: 2007/08/04, 23:04:48 »
hans@Hanssun:~$ cat /etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
        Fontpath        "/usr/share/fonts/X11/misc"
        Fontpath        "/usr/share/fonts/X11/cyrillic"
        Fontpath        "/usr/share/fonts/X11/100dpi/:unscaled"
        Fontpath        "/usr/share/fonts/X11/75dpi/:unscaled"
        Fontpath        "/usr/share/fonts/X11/Type1"
        Fontpath        "/usr/share/fonts/X11/100dpi"
        Fontpath        "/usr/share/fonts/X11/75dpi"
        # path to defoma fonts
        Fontpath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load            "i2c"
        Load            "bitmap"
        Load            "ddc"
        Load            "dri"
        Load            "extmod"
        Load            "freetype"
        Load            "glx"
        Load            "int10"
        Load            "vbe"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "us"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"        "/dev/input/mice"
        Option          "Protocol"      "ImPS/2"
        Option          "ZAxisMapping"  "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "stylus"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "stylus"
        Option          "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "eraser"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "eraser"
        Option          "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "cursor"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "cursor"
        Option          "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
        Identifier      "Generic Video Card"
        Driver          "fglrx"
        Busid           "PCI:6:0:0"
EndSection

Section "Monitor"
        Identifier      "Generic Monitor"
        Option          "DPMS"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "Generic Video Card"
        Monitor         "Generic Monitor"
        Defaultdepth    24
        SubSection "Display"
                Depth   1
                Modes           "1280x1024"     "1152x864"      "1024x768"     "832x624"        "800x600"       "720x400"       "640x480"
        EndSubSection
        SubSection "Display"
                Depth   4
                Modes           "1280x1024"     "1152x864"      "1024x768"     "832x624"        "800x600"       "720x400"       "640x480"
        EndSubSection
        SubSection "Display"
                Depth   8
                Modes           "1280x1024"     "1152x864"      "1024x768"     "832x624"        "800x600"       "720x400"       "640x480"
        EndSubSection
        SubSection "Display"
                Depth   15
                Modes           "1280x1024"     "1152x864"      "1024x768"     "832x624"        "800x600"       "720x400"       "640x480"
        EndSubSection
        SubSection "Display"
                Depth   16
                Modes           "1280x1024"     "1152x864"      "1024x768"     "832x624"        "800x600"       "720x400"       "640x480"
        EndSubSection
        SubSection "Display"
                Depth   24
                Modes           "1280x1024"     "1152x864"      "1024x768"     "832x624"        "800x600"       "720x400"       "640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
  screen "Default Screen"
        Inputdevice     "Generic Keyboard"
        Inputdevice     "Configured Mouse"
        Inputdevice     "stylus"        "SendCoreEvents"
        Inputdevice     "cursor"        "SendCoreEvents"
        Inputdevice     "eraser"        "SendCoreEvents"
EndSection

Section "DRI"
        Mode    0666
EndSection
Section "Extensions"
        Option          "Composite"     "0"
EndSection
hans@Hanssun:~$
Hallo Happyhamster

mijn scherm valt soms weg maar alle programmas die ik gestart heb blijven gewoon draaien , alleen het aan/uit lampje knippert maar ik kan gewoon muziek horen.
en wat ik ook doe ik krijg het scherm niet meer aan , dan moet ik hem eerst uit zetten door de stekker uit de stopcontact te trekken.

Gr Hans,

Software voor SyncMaster 940n
« Reactie #3 Gepost op: 2007/08/04, 23:12:16 »
Dus je schakelt de monitor uit, stekker eruit/stekker erin, monitor aan en dan heb je weer beeld? En alles werkt gewoon?
Hoe zit het met de scherm resolutie e.d.? Kan je de 1280x1024 gewoon gebruiken etc?

Om welke videokaart gaat het precies?

Offline Pjotr

  • Lid
    • Makkelijke Linuxtips
Software voor SyncMaster 940n
« Reactie #4 Gepost op: 2007/08/04, 23:14:21 »
Doe eens dit:
Systeem - Beheer - Synaptic pakketbeheer
zoekterm: xresprobe
aanvinken en druk op knop Toepassen

Daarna in terminal:
sudo ddcprobe

en post hier eens de uitkomst daarvan? Gewoon kopieren vanuit de terminal.

Offline Hanssun

  • Lid
Software voor SyncMaster 940n
« Reactie #5 Gepost op: 2007/08/04, 23:22:39 »
Citaat van: happyhamster
Dus je schakelt de monitor uit, stekker eruit/stekker erin, monitor aan en dan heb je weer beeld? En alles werkt gewoon?
Hoe zit het met de scherm resolutie e.d.? Kan je de 1280x1024 gewoon gebruiken etc?

Om welke videokaart gaat het precies?
alles doet het gewoon ook mij resolutie 1280x1024 daarom dacht ik ook dat het aan een driver moest leggen , ik kan een uur ongestoord werken ik heb de energiebeheer op nooit gezet en de computer als inactief op 2uur gezet.
ATI  RX1 1650XT T2D256EZ 256MB DDR3

Offline Hanssun

  • Lid
Software voor SyncMaster 940n
« Reactie #6 Gepost op: 2007/08/04, 23:26:17 »
Citaat van: pjotr123
Doe eens dit:
Systeem - Beheer - Synaptic pakketbeheer
zoekterm: xresprobe
aanvinken en druk op knop Toepassen

Daarna in terminal:
sudo ddcprobe

en post hier eens de uitkomst daarvan? Gewoon kopieren vanuit de terminal.
het volgende geeft die dan aan.

ans@Hanssun:~$ sudo ddcprobe
vbe: VESA 3.0 detected.
oem: ATI ATOMBIOS
vendor: (C) 1988-2005, ATI Technologies Inc.
product: RV560 01.00
memory: 16384kb
mode: 640x400x256
mode: 640x480x256
mode: 800x600x256
mode: 1024x768x256
mode: 1280x1024x256
mode: 640x480x32k
mode: 640x480x64k
mode: 640x480x16m
mode: 800x600x32k
mode: 800x600x64k
mode: 800x600x16m
mode: 1024x768x32k
mode: 1024x768x64k
mode: 1024x768x16m
mode: 1280x1024x32k
mode: 1280x1024x64k
mode: 1280x1024x16m
mode: 320x200x32k
mode: 320x200x64k
mode: 320x200x16m
mode: 1600x1200x256
mode: 1600x1200x32k
mode: 1600x1200x64k
edid:
edid: 1 3
id: 01e1
eisa: SAM01e1
serial: 48413139
manufacture: 13 2007
input: separate sync, composite sync, sync on green, analog signal.
screensize: 38 30
gamma: 2.200000
dpms: RGB, active off, no suspend, no standby
timing: 720x400@70 Hz (VGA 640x400, IBM)
timing: 720x400@88 Hz (XGA2)
timing: 640x480@60 Hz (VGA)
timing: 640x480@67 Hz (Mac II, Apple)
timing: 640x480@72 Hz (VESA)
timing: 640x480@75 Hz (VESA)
timing: 800x600@60 Hz (VESA)
timing: 800x600@72 Hz (VESA)
timing: 800x600@75 Hz (VESA)
timing: 832x624@75 Hz (Mac II)
timing: 1024x768@87 Hz Interlaced (8514A)
timing: 1024x768@70 Hz (VESA)
timing: 1024x768@75 Hz (VESA)
timing: 1280x1024@75 (VESA)
ctiming: 1280x1024@60
ctiming: 1280x960@60
ctiming: 1152x864@75
dtiming: 1280x1024@70
monitorrange: 30-81, 56-75
monitorname: SyncMaster
monitorserial: HMDP332481
hans@Hanssun:~$

Offline Pjotr

  • Lid
    • Makkelijke Linuxtips
Software voor SyncMaster 940n
« Reactie #7 Gepost op: 2007/08/04, 23:30:28 »
OK, mooi. Doe nu eens dit (hiervoor is xresprobe onmisbaar, en die heb je nu):

Toepassingen - Hulpmiddelen - Terminalvenster
tik in:
sudo dpkg-reconfigure xserver-xorg

Maak in de vragenriedel geen enkele eigen keuze, ga meteen akkoord met de voorgestelde antwoorden, met 1 uitzondering: kies als driver "fglrx"
Gebruik de volgende toetsen in de vragenriedel:
Tabtoets, Spatiebalk, *binnenste* Entertoets, pijltjestoetsen.

Daarna herstart van je PC

Dan moet alles goed ingesteld zijn!    :-)

Groet, Pjotr.

Offline Pjotr

  • Lid
    • Makkelijke Linuxtips
Software voor SyncMaster 940n
« Reactie #8 Gepost op: 2007/08/04, 23:38:45 »
.......overigens mijn excuses aan Happyhamster, ik merk dat ik me heb ingedrongen in een hulpactie die op volle vaart bezig was.

Offline Hanssun

  • Lid
Software voor SyncMaster 940n
« Reactie #9 Gepost op: 2007/08/04, 23:42:09 »
Citaat van: pjotr123
OK, mooi. Doe nu eens dit (hiervoor is xresprobe onmisbaar, en die heb je nu):

Toepassingen - Hulpmiddelen - Terminalvenster
tik in:
sudo dpkg-reconfigure xserver-xorg

Maak in de vragenriedel geen enkele eigen keuze, ga meteen akkoord met de voorgestelde antwoorden, met 1 uitzondering: kies als driver "fglrx"
Gebruik de volgende toetsen in de vragenriedel:
Tabtoets, Spatiebalk, *binnenste* Entertoets, pijltjestoetsen.

Daarna herstart van je PC

Dan moet alles goed ingesteld zijn!    :-)

Groet, Pjotr.
Pjotr,

ik denk dat alles nu goed staat maar dat kan ik pas weten over een uur :-) , de uitkomst post ik hier wel.
In iedergeval dank voor U hulp en Happyhamster ook thanxx.

Gr Hans,

Offline Pjotr

  • Lid
    • Makkelijke Linuxtips
Software voor SyncMaster 940n
« Reactie #10 Gepost op: 2007/08/04, 23:44:22 »
Wat zou er dan over een uur kunnen gebeuren?
Iets wat hierop lijkt?
http://forum.ubuntu-nl.org/message/88237#p88237

Offline Hanssun

  • Lid
Software voor SyncMaster 940n
« Reactie #11 Gepost op: 2007/08/04, 23:49:33 »
Citaat van: pjotr123
Wat zou er dan over een uur kunnen gebeuren?
ik kon een uur stoorloos werken op me pc en dan schakel het beeldscherm uit maar de programmas die ik had gestart blijven gewoon doorwerken:-) , dus hoop dat het hier mee is opgelost.

Offline Hanssun

  • Lid
Software voor SyncMaster 940n
« Reactie #12 Gepost op: 2007/08/05, 00:06:15 »
Citaat van: pjotr123
Wat zou er dan over een uur kunnen gebeuren?
Iets wat hierop lijkt?
http://forum.ubuntu-nl.org/message/88237#p88237
Hallo Pjotr,

ik denk dat dit het probleem was:-) , heb alles gedaan wat je in dat artikel
heb beschreven.
Mag ik je nog een keer danken voor je vakkundige hulp.

Gr Hans,

Offline Pjotr

  • Lid
    • Makkelijke Linuxtips
Software voor SyncMaster 940n
« Reactie #13 Gepost op: 2007/08/05, 10:49:30 »
Mooi zo! Graag gedaan.  :-)