Ik heb een USB stick, die ik maar niet gemount kan krijgen onder Ubuntu 8.10.
Als ik onder /dev/ kijk, dan verwachtte ik daar eigenlijk sdf, aangezien deze in de dmesg terug komt, maar deze bestaat niet eens?
Bij alle pogingen die ik onderneem fdisk, mount, cfdisk, parted, etc. overal krijg ik de melding unable to open.
Iemand enig idee, tot nu toe levert mijn zoektocht op internet weinig op.
Ik krijg de stick ook niet gelezen onder Windows 7, Windows XP, Suse Linux en ubuntu 9.04.
In de dmesg staat:
[18161926.256028] usb 6-1: new full speed USB device using uhci_hcd and address 3
[18161926.408967] usb 6-1: configuration #1 chosen from 1 choice
[18161926.412160] scsi9 : SCSI emulation for USB Mass Storage devices
[18161926.412529] usb-storage: device found at 3
[18161926.412534] usb-storage: waiting for device to settle before scanning
[18161931.414096] usb-storage: device scan complete
[18161931.417073] scsi 9:0:0:0: Direct-Access ChipsBnk Flash Disk 5.00 PQ: 0 ANSI: 2
[18161931.426407] sd 9:0:0:0: [sdf] 16384 512-byte hardware sectors (8 MB)
[18161931.429046] sd 9:0:0:0: [sdf] Write Protect is off
[18161931.429051] sd 9:0:0:0: [sdf] Mode Sense: 0b 00 00 08
[18161931.429054] sd 9:0:0:0: [sdf] Assuming drive cache: write through
[18161931.438043] sd 9:0:0:0: [sdf] 16384 512-byte hardware sectors (8 MB)
[18161931.441043] sd 9:0:0:0: [sdf] Write Protect is off
[18161931.441048] sd 9:0:0:0: [sdf] Mode Sense: 0b 00 00 08
[18161931.441051] sd 9:0:0:0: [sdf] Assuming drive cache: write through
[18161931.441461] sdf: unknown partition table
[18161931.461155] sd 9:0:0:0: [sdf] Attached SCSI removable disk
[18161931.461551] sd 9:0:0:0: Attached scsi generic sg6 type 0
[18161961.704032] usb 6-1: reset full speed USB device using uhci_hcd and address 3
[18161991.964028] usb 6-1: reset full speed USB device using uhci_hcd and address 3
[18162022.224527] usb 6-1: reset full speed USB device using uhci_hcd and address 3
[18162052.484524] usb 6-1: reset full speed USB device using uhci_hcd and address 3
[18162082.744528] usb 6-1: reset full speed USB device using uhci_hcd and address 3
[18162113.007477] usb 6-1: reset full speed USB device using uhci_hcd and address 3
[18162113.158655] sd 9:0:0:0: [sdf] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK,SUGGEST_OK
[18162113.158663] end_request: I/O error, dev sdf, sector 104
[18162113.158666] __ratelimit: 7 callbacks suppressed
[18162113.158670] Buffer I/O error on device sdf, logical block 13
[18162113.158676] Buffer I/O error on device sdf, logical block 14
[18162113.158679] Buffer I/O error on device sdf, logical block 15
[18162113.158682] Buffer I/O error on device sdf, logical block 16
[18162113.158686] Buffer I/O error on device sdf, logical block 17
[18162113.158689] Buffer I/O error on device sdf, logical block 18
[18162113.158692] Buffer I/O error on device sdf, logical block 19
[18162113.158695] Buffer I/O error on device sdf, logical block 20
[18162113.158698] Buffer I/O error on device sdf, logical block 21
[18162113.158701] Buffer I/O error on device sdf, logical block 22
[18162143.276030] usb 6-1: reset full speed USB device using uhci_hcd and address 3
[18162173.536026] usb 6-1: reset full speed USB device using uhci_hcd and address 3
[18162203.796037] usb 6-1: reset full speed USB device using uhci_hcd and address 3
[18162234.058003] usb 6-1: reset full speed USB device using uhci_hcd and address 3
