Omdat ik straks van Ubuntu 7,10 wil opwaarderen naar Kubuntu 8.04 heb ik een goed opslagmedium nodig voor mijn back-ups. Hiertoe heb ik mijn al drie jaar oude doch enige USB-stick in mijn computer gestoken, Terminal geopend en dmesg gedaan. Het resutaat is dit:
[ 0.000000] HighMem 229376 -> 260032
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 260032
[ 0.000000] On node 0 totalpages: 260032
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 239 pages used for memmap
[ 0.000000] HighMem zone: 30417 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F8840 checksum 0
[ 0.000000] ACPI: RSDP 000F8840, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3F7C0000, 0038 (r1 A M I OEMRSDT 5000603 MSFT 97)
[ 0.000000] ACPI: FACP 3F7C0200, 0084 (r2 A M I OEMFACP 5000603 MSFT 97)
[ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000820/0 [20070126]
[ 0.000000] ACPI: DSDT 3F7C0430, 4F1B (r1 W812U W812UF05 F05 INTL 2002026)
[ 0.000000] ACPI: FACS 3F7CE000, 0040
[ 0.000000] ACPI: APIC 3F7C0390, 005C (r1 A M I OEMAPIC 5000603 MSFT 97)
[ 0.000000] ACPI: MCFG 3F7C03F0, 003C (r1 A M I OEMMCFG 5000603 MSFT 97)
[ 0.000000] ACPI: OEMB 3F7CE040, 005C (r1 A M I AMI_OEM 5000603 MSFT 97)
[ 0.000000] ACPI: ASF! 3F7C5350, 0075 (r32 LEGEND I865PASF 1 INTL 2002026)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf600000)
[ 0.000000] Built 1 zonelists. Total pages: 258001
[ 0.000000] Kernel command line: root=UUID=a52dc893-42d8-41db-bf4f-b3b1e9476748 ro quiet splash acpi=force
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1995.109 MHz processor.
[ 21.898175] Console: colour VGA+ 80x25
[ 21.898490] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 21.898920] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 21.941089] Memory: 1019508k/1040128k available (2015k kernel code, 19912k reserved, 915k data, 364k init, 122624k highmem)
[ 21.941104] virtual kernel memory layout:
[ 21.941106] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 21.941108] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 21.941110] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 21.941111] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 21.941113] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 21.941115] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 21.941117] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 21.941122] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 21.941169] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 22.021157] Calibrating delay using timer specific routine.. 3994.23 BogoMIPS (lpj=7988469)
[ 22.021189] Security Framework v1.0.0 initialized
[ 22.021196] SELinux: Disabled at boot.
[ 22.021215] Mount-cache hash table entries: 512
[ 22.021377] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 22.021389] monitor/mwait feature present.
[ 22.021392] using mwait in idle threads.
[ 22.021398] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 22.021402] CPU: L2 cache: 4096K
[ 22.021405] CPU: Physical Processor ID: 0
[ 22.021408] CPU: Processor Core ID: 0
[ 22.021411] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 22.021424] Compat vDSO mapped to ffffe000.
[ 22.021442] Checking 'hlt' instruction... OK.
[ 22.037299] SMP alternatives: switching to UP code
[ 22.037919] Early unpacking initramfs... done
[ 22.585242] ACPI: Core revision 20070126
[ 22.585310] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 22.600641] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 22.600665] SMP alternatives: switching to SMP code
[ 22.600757] Booting processor 1/1 eip 3000
[ 22.611514] Initializing CPU#1
[ 22.688824] Calibrating delay using timer specific routine.. 3990.31 BogoMIPS (lpj=7980634)
[ 22.688833] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 22.688842] monitor/mwait feature present.
[ 22.688847] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 22.688851] CPU: L2 cache: 4096K
[ 22.688854] CPU: Physical Processor ID: 0
[ 22.688857] CPU: Processor Core ID: 1
[ 22.688859] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 22.690104] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 22.690135] Total of 2 processors activated (7984.55 BogoMIPS).
[ 22.690294] ENABLING IO-APIC IRQs
[ 22.690499] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 22.836889] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 22.856900] Brought up 2 CPUs
[ 22.979838] migration_cost=52
[ 22.980020] Booting paravirtualized kernel on bare hardware
[ 22.980108] Time: 1:05:30 Date: 03/21/108
[ 22.980135] NET: Registered protocol family 16
[ 22.980261] EISA bus registered
[ 22.980268] ACPI: bus type pci registered
[ 22.980456] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[ 22.980460] PCI: Using configuration type 1
[ 22.980463] Setting up standard PCI resources
[ 22.990108] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 22.990111] mtrr: probably your BIOS does not setup all CPUs.
[ 22.990114] mtrr: corrected configuration.
[ 22.993403] ACPI: EC: Look up EC in DSDT
[ 22.994085] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 22.998038] ACPI: Interpreter enabled
[ 22.998044] ACPI: (supports S0 S1 S3 S4 S5)
[ 22.998074] ACPI: Using IOAPIC for interrupt routing
[ 23.008341] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 23.008531] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 23.008544] PCI: Probing PCI hardware (bus 00)
[ 23.009372] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 23.009379] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 23.010540] PCI: Transparent bridge - 0000:00:1e.0
[ 23.010617] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 23.010839] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 23.011001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 23.011159] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 23.011296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 23.027671] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 23.027864] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 23.028054] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 23.028242] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 23.028431] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 23.028622] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 23.028839] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 23.029030] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 23.029212] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 23.029227] pnp: PnP ACPI init
[ 23.029240] ACPI: bus type pnp registered
[ 23.032462] pnp: PnP ACPI: found 14 devices
[ 23.032466] ACPI: ACPI bus type pnp unregistered
[ 23.032471] PnPBIOS: Disabled by ACPI PNP
[ 23.032540] PCI: Using ACPI for IRQ routing
[ 23.032545] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 23.048459] NET: Registered protocol family 8
[ 23.048463] NET: Registered protocol family 20
[ 23.048534] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 23.048549] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 23.048555] pnp: 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 23.048564] pnp: 00:0a: iomem range 0xffc00000-0xffefffff could not be reserved
[ 23.048572] pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 23.048577] pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 23.048585] pnp: 00:0c: iomem range 0xe0000000-0xe3ffffff has been reserved
[ 23.048594] pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 23.048599] pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 23.048603] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 23.048608] pnp: 00:0d: iomem range 0x100000-0x3f7fffff could not be reserved
[ 23.048669] Time: tsc clocksource has been installed.
[ 23.079102] PCI: Bridge: 0000:00:1c.0
[ 23.079107] IO window: c000-cfff
[ 23.079115] MEM window: fde00000-fdefffff
[ 23.079120] PREFETCH window: disabled.
[ 23.079127] PCI: Bridge: 0000:00:1c.1
[ 23.079130] IO window: disabled.
[ 23.079137] MEM window: fdf00000-fdffffff
[ 23.079142] PREFETCH window: disabled.
[ 23.079148] PCI: Bridge: 0000:00:1c.2
[ 23.079152] IO window: d000-dfff
[ 23.079160] MEM window: fe000000-fe7fffff
[ 23.079166] PREFETCH window: bdf00000-bfefffff
[ 23.079173] PCI: Bridge: 0000:00:1e.0
[ 23.079176] IO window: disabled.
[ 23.079183] MEM window: fe800000-fe8fffff
[ 23.079188] PREFETCH window: disabled.
[ 23.079219] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 23.079229] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 23.079254] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 18 (level, low) -> IRQ 17
[ 23.079262] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 23.079287] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 19 (level, low) -> IRQ 18
[ 23.079295] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 23.079310] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 23.079325] NET: Registered protocol family 2
[ 23.120666] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 23.120732] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 23.121720] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 23.122054] TCP: Hash tables configured (established 131072 bind 65536)
[ 23.122058] TCP reno registered
[ 23.132815] checking if image is initramfs...<6>Switched to high resolution mode on CPU 1
[ 23.580411] Switched to high resolution mode on CPU 0
[ 23.654989] it is
[ 24.214716] Freeing initrd memory: 7071k freed
[ 24.215574] audit: initializing netlink socket (disabled)
[ 24.215596] audit(1208739930.980:1): initialized
[ 24.215749] highmem bounce pool size: 64 pages
[ 24.218802] VFS: Disk quotas dquot_6.5.1
[ 24.218877] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 24.219010] io scheduler noop registered
[ 24.219013] io scheduler anticipatory registered
[ 24.219016] io scheduler deadline registered
[ 24.219038] io scheduler cfq registered (default)
[ 24.219061] Boot video device is 0000:00:02.0
[ 24.219276] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 24.219333] assign_interrupt_mode Found MSI capability
[ 24.219338] Allocate Port Service[0000:00:1c.0:pcie00]
[ 24.219396] Allocate Port Service[0000:00:1c.0:pcie02]
[ 24.219511] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 24.219568] assign_interrupt_mode Found MSI capability
[ 24.219572] Allocate Port Service[0000:00:1c.1:pcie00]
[ 24.219621] Allocate Port Service[0000:00:1c.1:pcie02]
[ 24.219736] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 24.219792] assign_interrupt_mode Found MSI capability
[ 24.219795] Allocate Port Service[0000:00:1c.2:pcie00]
[ 24.219848] Allocate Port Service[0000:00:1c.2:pcie02]
[ 24.220072] isapnp: Scanning for PnP cards...
[ 24.573233] isapnp: No Plug & Play device found
[ 24.606428] Real Time Clock Driver v1.12ac
[ 24.606599] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 24.608340] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 24.608663] input: Macintosh mouse button emulation as /class/input/input0
[ 24.608794] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 24.612149] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 24.612157] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 24.612400] mice: PS/2 mouse device common for all mice
[ 24.612560] EISA: Probing bus 0 at eisa.0
[ 24.612600] EISA: Detected 0 cards.
[ 24.612834] TCP cubic registered
[ 24.612853] NET: Registered protocol family 1
[ 24.612883] Using IPI No-Shortcut mode
[ 24.613117] Magic number: 4:181:54
[ 24.613423] Freeing unused kernel memory: 364k freed
[ 24.635187] input: AT Translated Set 2 keyboard as /class/input/input1
[ 25.943593] AppArmor: AppArmor initialized<5>audit(1208739932.480:2): type=1505 info="AppArmor initialized" pid=1233
[ 25.953115] fuse init (API version 7.8)
[ 25.960280] Failure registering capabilities with primary security module.
[ 25.999818] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 25.999958] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 26.002106] ACPI: Thermal Zone [THRM] (29 C)
[ 26.606969] usbcore: registered new interface driver usbfs
[ 26.607004] usbcore: registered new interface driver hub
[ 26.607057] usbcore: registered new device driver usb
[ 26.608259] USB Universal Host Controller Interface driver v3.0
[ 26.608342] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 26.608357] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 26.608363] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 26.608538] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 26.608573] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e880
[ 26.608730] usb usb1: configuration #1 chosen from 1 choice
[ 26.608771] hub 1-0:1.0: USB hub found
[ 26.608779] hub 1-0:1.0: 2 ports detected
[ 26.707596] SCSI subsystem initialized
[ 26.710755] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 18
[ 26.710770] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 26.710776] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 26.710809] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 26.710843] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e800
[ 26.710985] usb usb2: configuration #1 chosen from 1 choice
[ 26.711030] hub 2-0:1.0: USB hub found
[ 26.711039] hub 2-0:1.0: 2 ports detected
[ 26.715580] libata version 2.21 loaded.
[ 26.814723] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
[ 26.814738] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 26.814744] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 26.814780] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 26.814815] uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000e480
[ 26.814956] usb usb3: configuration #1 chosen from 1 choice
[ 26.814996] hub 3-0:1.0: USB hub found
[ 26.815004] hub 3-0:1.0: 2 ports detected
[ 26.918615] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 20
[ 26.918626] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 26.918632] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 26.918668] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 26.918698] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000e400
[ 26.918833] usb usb4: configuration #1 chosen from 1 choice
[ 26.918872] hub 4-0:1.0: USB hub found
[ 26.918881] hub 4-0:1.0: 2 ports detected
[ 27.022581] ata_piix 0000:00:1f.2: version 2.11
[ 27.022589] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 27.022619] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 18
[ 27.022657] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 27.022745] scsi0 : ata_piix
[ 27.022804] scsi1 : ata_piix
[ 27.022964] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[ 27.022970] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[ 27.186683] ata1.00: ATA-7: TOSHIBA MK8034GSX, AH301A, max UDMA/100
[ 27.186690] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 27.194675] ata1.00: configured for UDMA/100
[ 27.538417] ata2.00: ATAPI: SONY DVD RW DW-Q520A, HYS2, max UDMA/33
[ 27.734309] ata2.00: configured for UDMA/33
[ 27.734456] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8034GS AH30 PQ: 0 ANSI: 5
[ 27.736660] scsi 1:0:0:0: CD-ROM SONY DVD RW DW-Q520A HYS2 PQ: 0 ANSI: 5
[ 27.737105] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 27.737122] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 27.737128] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 27.737169] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 27.737207] ehci_hcd 0000:00:1d.7: debug port 1
[ 27.737216] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 27.737226] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfeb3bc00
[ 27.741129] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 27.741259] usb usb5: configuration #1 chosen from 1 choice
[ 27.741301] hub 5-0:1.0: USB hub found
[ 27.741310] hub 5-0:1.0: 8 ports detected
[ 27.842234] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 18 (level, low) -> IRQ 17
[ 27.894992] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[fe8ff800-fe8fffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 27.908744] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 27.908763] sd 0:0:0:0: [sda] Write Protect is off
[ 27.908767] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 27.908791] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.908858] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 27.908873] sd 0:0:0:0: [sda] Write Protect is off
[ 27.908877] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 27.908901] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.908907] sda: sda1 sda2 < sda5 >
[ 27.959259] sd 0:0:0:0: [sda] Attached SCSI disk
[ 27.966067] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 27.966095] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 27.976881] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 27.976887] Uniform CD-ROM driver Revision: 3.20
[ 27.977127] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 28.228928] Attempting manual resume
[ 28.228933] swsusp: Resume From Partition 8:5
[ 28.228936] PM: Checking swsusp image.
[ 28.229210] PM: Resume from disk failed.
[ 28.281033] kjournald starting. Commit interval 5 seconds
[ 28.281045] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.169382] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0003252168000bfc]
[ 36.790919] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 36.830772] Netfilter messages via NETLINK v0.30.
[ 36.848025] nf_conntrack version 0.5.0 (8126 buckets, 65008 max)
[ 38.355143] Linux agpgart interface v0.102 (c) Dave Jones
[ 38.441758] agpgart: Detected an Intel 945GM Chipset.
[ 38.445073] agpgart: Detected 7932K stolen memory.
[ 38.480866] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.583196] iTCO_vendor_support: vendor-support=0
[ 38.592567] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 38.592677] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
[ 38.592736] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 38.790205] agpgart: AGP aperture is 256M @ 0xd0000000
[ 38.790250] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.996819] intel_rng: FWH not detected
[ 39.004811] sdhci: Secure Digital Host Controller Interface driver
[ 39.004816] sdhci: Copyright(c) Pierre Ossman
[ 39.004886] sdhci: SDHCI controller found at 0000:06:07.1 [1180:0822] (rev 19)
[ 39.004910] ACPI: PCI Interrupt 0000:06:07.1[b] -> GSI 17 (level, low) -> IRQ 16
[ 39.005010] mmc0: SDHCI at 0xfe8ff400 irq 16 DMA
[ 39.137396] input: PC Speaker as /class/input/input2
[ 39.333746] ieee80211_crypt: registered algorithm 'NULL'
[ 39.337578] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 39.337583] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[ 39.421571] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 39.421590] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 39.421620] sky2 0000:01:00.0: v1.18 addr 0xfdefc000 irq 20 Yukon-FE (0xb7) rev 1
[ 39.421984] sky2 eth0: addr 00:03:25:30:4a:35
[ 39.499342] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp
[ 39.499348] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 39.499488] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 39.499506] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 39.504783] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 39.727652] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a
[ 39.759640] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 39.759663] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 39.764302] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 40.654885] si3054: cannot initialize. EXT MID = 0000
[ 41.395828] ipw3945: Radio Frequency Kill Switch is On:
[ 41.395832] Kill switch must be turned off for wireless networking to work.
[ 41.551739] lp: driver loaded but no devices found
[ 41.659636] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k
[ 42.015517] EXT3 FS on sda1, internal journal
[ 45.751800] ACPI: Battery Slot [BAT1] (battery present)
[ 45.949270] No dock devices found.
[ 46.096056] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 46.188788] ACPI: AC Adapter [AC] (on-line)
[ 46.211297] input: Power Button (FF) as /class/input/input4
[ 46.211518] ACPI: Power Button (FF) [PWRF]
[ 46.212741] input: Sleep Button (CM) as /class/input/input5
[ 46.212953] ACPI: Sleep Button (CM) [SLPB]
[ 46.213911] input: Lid Switch as /class/input/input6
[ 46.214126] ACPI: Lid Switch [LID0]
[ 46.214437] input: Power Button (CM) as /class/input/input7
[ 46.214468] ACPI: Power Button (CM) [PWRB]
[ 47.891998] Failure registering capabilities with primary security module.
[ 48.061164] sky2 eth0: enabling interface
[ 48.250807] ppdev: user-space parallel port driver
[ 48.412312] audit(1208739955.728:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5375 profile="/usr/sbin/cupsd"
[ 48.466740] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 48.466747] apm: disabled - APM is not SMP safe.
[ 49.730509] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 50.144896] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 50.249707] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 50.265106] NFSD: starting 90-second grace period
[ 55.582657] Bluetooth: Core ver 2.11
[ 55.582850] NET: Registered protocol family 31
[ 55.582854] Bluetooth: HCI device and connection manager initialized
[ 55.582859] Bluetooth: HCI socket layer initialized
[ 55.600802] Bluetooth: L2CAP ver 2.8
[ 55.600808] Bluetooth: L2CAP socket layer initialized
[ 55.687308] Bluetooth: RFCOMM socket layer initialized
[ 55.687326] Bluetooth: RFCOMM TTY layer initialized
[ 55.687329] Bluetooth: RFCOMM ver 1.8
[ 60.073738] [drm] Initialized drm 1.1.0 20060810
[ 60.105542] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 60.107277] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 60.263566] NET: Registered protocol family 17
[ 62.630369] NET: Registered protocol family 10
[ 62.630526] lo: Disabled Privacy Extensions
[ 72.761088] eth0: no IPv6 routers present
[ 1738.445734] usb 5-4: new high speed USB device using ehci_hcd and address 2
[ 1738.578542] usb 5-4: configuration #1 chosen from 1 choice
[ 1738.913782] usbcore: registered new interface driver libusual
[ 1738.977194] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1738.977202] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1738.989309] Initializing USB Mass Storage driver...
[ 1738.989391] scsi2 : SCSI emulation for USB Mass Storage devices
[ 1738.989470] usb-storage: device found at 2
[ 1738.989475] usb-storage: waiting for device to settle before scanning
[ 1738.989492] usbcore: registered new interface driver usb-storage
[ 1738.989497] USB Mass Storage support registered.
[ 1743.986848] usb-storage: device scan complete
[ 1743.987912] scsi 2:0:0:0: Direct-Access OLIDATA PDU01_1G 59C2.0 0.00 PQ: 0 ANSI: 2
[ 1743.990670] sd 2:0:0:0: [sdb] 1967616 512-byte hardware sectors (1007 MB)
[ 1743.991396] sd 2:0:0:0: [sdb] Write Protect is off
[ 1743.991401] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 1743.991405] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1743.992691] sd 2:0:0:0: [sdb] 1967616 512-byte hardware sectors (1007 MB)
[ 1743.993315] sd 2:0:0:0: [sdb] Write Protect is off
[ 1743.993320] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 1743.993323] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1743.993328] sdb: sdb1
[ 1744.022651] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 1744.022716] sd 2:0:0:0: Attached scsi generic sg2 type 0
herman@herman-Athec:~$
Kan iemand hier wijs uit? Is de stick goed of niet?