Hallo allemaal,
Ben me aan het verdiepen in linux, unbuntu en heb een Altos r510 server gekocht.
wil deze als webserver server gebruiken.LAMP
unbuntu heb ik inmiddels op mijn laptop geïnstalleerd en bevalt me zeer goed.
wil nu op de r510 ook unbuntu installeren, maar vraag me af of dit kan,
heb een stukje van de installatie gekopieed
onder de specs van de r510 hebben ze het in de manuel over de installatie cdroms van asm van windows en linux dit begrijp ik niet helemaal houd dit in dat ik die cdroms moet hebben voor ik unbuntu,linux kan installeren
of wordt er bedoelt dat het alleen om de drivers van het mobo gaat.
[color=red] dit zijn de specs van de server,[/color]
De Acer Altos R510 is een kwalitatief hoogstaande, entry-level 1U server voor Web and netwerk infrastructuren. De Acer Altos R510 is ontworpen met alle prestaties die snelgroeiende front-end en single-function applicaties van een voor een rack geoptimaliseerde server eisen. De 1U hoogte en de 2-way processor mogelijkheid voorzien klanten van een scherp geprijsde, voor een rack geoptimaliseerde oplossing voor single function en front-end applicaties.
De features bevatten de 64-bit Intel® Xeon™ processor met HT, standaard 1GB Registered ECC DDR SDRAM DIMMs uitbreidbaar tot 12GB voor uw toekomstige investering bescherming. Verder bieden 64-bit PCI-X slots tweemaal de bandbreedte van 32-bit PCI voor verbeterde data transfer rates. De Acer Altos R510 bevat ook een geïntegreerde Dual-Gigabit controller voor een flexibele netwerk verbinding, drie SATA of SCSI harddisk bays voor interne data opslag, SATA RAID 0 of 1 voor data bescherming en server beschikbaarheid. Daarnaast kan RAID 5 optioneel ondersteund worden.
[color=red]nu lees ik in de manuel het volgende,
This appendix shows you how to install the
ASM software packages.[/color]
159
Installing ASM
Acer Server Manager (ASM) consists of the ASM Console and the ASM
Agent. These two components are both required to perform server
management tasks.
System requirements
ASM requires TCP/IP connectivity between the ASM Console and the
ASM Agent.
ASM Agent
• Altos Server System
• Minimum of 256MB RAM
• IDE/SATA/SCSI hard drive with at least 100 MB free hard disk space
• Windows 2000 server/advanced server, Windows server 2003 web/
standard/Enterprise editions, Red Hat Enterprise Linux 3.0
ASM Console
• Intel Pentium III (500 MHz) or higher processor
• 128 MB of RAM
• SCSI/IDE hard drive with at least 100 MB free hard disk space
• Ethernet card
• Windows 2000 professional, Windows XP, Windows 2000 server/
advanced server, Windows server 2003 web/standard/Enterprise
editions, Red Hat Linux 9.0 or Red Hat Enterprise Linux 3.0
System setup
Make sure that your system meets the requirements listed above
before proceeding. You may also want to change your screen to
800 x 600 resolution or higher for optimum viewing.
Installing ASM Agent (Windows version)
To install ASM Agent:
1 Log in to the managed server using the Administrator account.
160 Appendix A: Management software installation
2 Insert the EasyBUILDTM Management CD into the server’s CD-ROM
drive.
The installation sequence will automatically begin.
3 Select the option for ASM installation.
The installation wizard will be initialized.
4 Follow all onscreen instructions to complete installation.
For detailed instructions on installing ASM Agent, refer to the
ASM User’s manual.
ASM Agent will auto-launch as a Windows service after rebooting
the system.
Installing ASM Console (Windows version)
To install ASM Console:
1 Log in to the target Windows-based PC using the Administrator
account.
Insert the EasyBUILDTM Management CD into the computer’s
2
CD-ROM drive.
The installation sequence will automatically begin.
3 Select the option for ASM installation.
The installation wizard will be initialized.
4 Follow all onscreen instructions to complete installation.
For detailed instructions on installing ASM Console, refer to the
ASM User’s manual.
To launch the program, on the Windows taskbar click on the Start
button, point to programs, select Acer Server Manager then click
Acer Server Manager
Installing ASM Agent (Linux version)
161
To install the ASM6 Agent on RedHat Linux 9.0
1 Insert the ASM6 installation CD into your computer's optical drive.
2 Mount the CD-ROM drive with "mount /dev/cdrom /mnt/cdrom"
command. For more information on mount command and the
options, please refer to RedHat Linux user's guide.
3 Change the working directory to ASM6 Linux Agent subdirectory
with the command "cd /mnt/cdrom/LinuxAgent".
4 Type in the command "./asmsetup install" to install the ASM6
Linux Agent. Follow the prompted installation guide, and you can
install the ASM6 Linux Agent with ease.
5 Umount the CD-ROM Drive with "umount /mnt/cdrom" command.
For detailed instructions on installing ASM Agent on Linux systems,
refer to the ASM User’s manual.
Lang verhaal, maar probeer zo een beetje duidelijk temaken
vrg
sprk