Hoi,
Ik hoop dat dit het goede topic is. Ik heb sinds dit weekend een Medion S2210 laptop. Onder Windows XP gaat draadloos internet perfect, onder Ubuntu 8.10 niet. Onder "Network connections" en dan het tabje wireless verwacht ik mijn draadloze netwerk te zien. Dit is niet het geval, en ook als ik met de hand de instellingen invul, dan geen verbinding.
Linux (Ubuntu 8.10) herkend (m.b.h. lspci) de volgende zaken:
- Network controller: RaLink Device 0781 (volgens mij het wlan-device)
- Ethernet controller: Realtek semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
Onder Windows heb ik een driver geïnstalleerd die op CD meegeleverd wordt: RaLink RT2860. Tot mijn grote vreugde bied RaLink ook een Linux-driver aan op haar website. Ik heb de readme van die driver even doorgelezen, en moet zeggen: het is voor mij als Linux-newbie abracadabra:
=======================================================================
Build Instructions:
====================
1> $tar -xvzf DPB_RT2860_Linux_STA_x.x.x.x.tgz
go to "./DPB_RT2860_Linux_STA_x.x.x.x" directory.
2> In Makefile
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"
define the linux kernel source include file path LINUX_SRC
modify to meet your need.
3> In os/linux/config.mk
define the GCC and LD of the target machine
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> #>cd wpa_supplicant-x.x
=> #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> #>cd wpa_supplicant-0.5.7
=> #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
4> $make
# compile driver source code
# To fix "error: too few arguments to function ¡¥iwe_stream_add_event"
=> $patch -i os/linux/sta_ioctl.c.patch os/linux/sta_ioctl.c
5> $cp RT2860STA.dat /etc/Wireless/RT2860STA/RT2860STA.dat
6> load driver
#[kernel 2.4]
# $/sbin/insmod rt2860sta.o
# $/sbin/ifconfig ra0 inet YOUR_IP up
#[kernel 2.6]
# $/sbin/insmod rt2860sta.ko
# $/sbin/ifconfig ra0 inet YOUR_IP up
7> unload driver
$/sbin/ifconfig ra0 down
$/sbin/rmmod rt2860sta
Is het nodig om deze driver te installeren, Ubuntu herkend de hardware immers wel. Zo ja, is er een eenvoudiger manier om dit te doen, zo nee, heeft iemand nog een andere tip om wel verbinding te krijgen?
Groeten,
Erik
*edit* tiepvoudt & dank voor afslpitsen van het topic.