Digitenne Zolid Hybrid TV stick

[John K]

Ik heb een Digitenne usb ontvanger en wil deze aan de praat krijgen. DMESG geeft;

[12247.637609] tm6000: New video device @ 480 Mbps (6000:0002, ifnum 0)
[12247.637613] tm6000: Found Generic tm6010 board
[12247.646841] tm6000 #0: i2c eeprom 00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12247.787107] tm6000 #0: i2c eeprom 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12247.928739] tm6000 #0: i2c eeprom 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12248.070889] tm6000 #0: i2c eeprom 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12248.212615] tm6000 #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12248.354683] tm6000 #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12248.495929] tm6000 #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12248.637093] tm6000 #0: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12248.778864] tm6000 #0: i2c eeprom 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12248.920499] tm6000 #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12249.062649] tm6000 #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12249.202910] tm6000 #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12249.345309] tm6000 #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12249.487963] tm6000 #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12249.630704] tm6000 #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12249.773241] tm6000 #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[12249.905776] Device has eeprom but is currently unknown
[12249.912502] Found tm6010
[12250.785823] tuner 6-0061: Tuner -1 found with type(s) Radio TV.
[12250.852562] xc2028 6-0061: creating new instance
[12250.852572] xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner
[12250.852578] Setting firmware parameters for xc2028
[12250.852880] tm6000 #0: registered device video0
[12250.852886] Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: 0)
[12250.852932] usbcore: registered new interface driver tm6000
[12250.907312] tm6000 #0: Initialized (TM6000 Audio Extension) extension
[12250.913711] xc2028 6-0061: Could not load firmware xc3028-v27.fw.
[12251.473574] DVB: registering new adapter (Trident TVMaster 6000 DVB-T)
[12251.473592] usb 1-2: DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[12251.473793] xc2028 6-0061: attaching existing instance
[12251.473798] xc2028 6-0061: type set to XCeive xc2028/xc3028 tuner
[12251.473801] tm6000: XC2028/3028 asked to be attached to frontend!
[12251.475390] tm6000 #0: Initialized (TM6000 dvb Extension) extension

Heeft iemand een idee wat dit zegt? En hoe verder?

Groet John K

[aartje]

Ik vond het volgende (heb het zelf niet geprobeerd, ik heb een andere stick):


Drivers

Newer kernels (2.6.25+) have tuner-xc2028 that supports those chips.

The driver will also require a firmware, else the device will not operate correctly, and an error like the following example will occur in your system log (see dmesg output) notifying you of this fact:

 firmware: requesting xc3028-v27.fw
 xc2028 1-0061: Error: firmware xc3028-v27.fw not found.

See the "How to Obtain the Firmware" section below to fix this problem.
Firmware Information

The information in this section is directed only towards support for the in-kernel driver. For 3rd party driver requirements and/or information, please consult those sources directly.
How to Obtain the Firmware

Follow the instructions outlined on lines 6-14 of the extract_xc3028.pl perl script. Specifically:
# In order to use, you need to:
#       1) Download the windows driver with something like:
#               wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
#               ( find here: http://cdn.pinnaclesys.com/SupportFiles/PCTV%20Drivers/ReadmePCTV.htm )
#       2) Extract the file hcw85bda.sys from the zip into the current dir:
#               unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys
#       3) Download the extract script
#               wget http://linuxtv.org/hg/v4l-dvb/raw-file/3919b17dc88e/linux/Documentation/video4linux/extract_xc3028.pl
#       3) run the script:
#               perl extract_xc3028.pl
#       4) copy the generated file:
#               sudo cp xc3028-v27.fw /lib/firmware

Dit vond ik onder:
http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028

[John K]

Super, ik ga ermee aan de slag. Weet jij met welk programma je een tv schermpje opent onder linux?

[aartje]

Ik gebruik daar altijd Kaffeine voor.  Dat is wel een kde-programma, maar ik heb het gedraaid onder Ubuntu8.04 t/m 14.04 (Gnome classic)
en Mint13 t/m Mint17 (Mate). Dat laadt wel een stel kde-libraries mee, maar ik heb daar nog nooit enig probleem mee gehad.
Ik heb trouwens daarmee ooit ook eens met een Zolid-hybride PCI- TV kaart (Aldi) digitenne-kanalen mee kunnen ontvangen.
Alleen maar de vrij verkrijgbare kanalen trouwens, Ned1,2,3 Radio1t/m6, RTVNH-radio en TV (in Alkmaar)Ik zou niet weten wat met de gecodeerde kanalen te doen.

Misschien heb je hier ook nog wat aan:
http://www.jrhenkelmann.net/index.php?option=com_content&task=view&id=31

en/of http://www.howtoeverything.net/linux/hardware/making-dvb-usb-sticks-and-other-tv-cards-work-linux

De laatste is de nieuwere versie volgens mij.