Ik heb ubuntu 6.06 geinstalleerd en standaard staat de resolutie op 1280x1024. Ik wilde deze resolutie aanpassen omdat mijn scherm 1400x1050 pixels heeft, maar dit kan niet. Er is maar 1 resolutie te kiezen.
Dit is de output van xrandr:
$ xrandr
SZ: Pixels Physical Refresh
*0 1280 x 1024 ( 313mm x 230mm ) *-19569
Current rotation - normal
Current reflection - none
Rotations possible - normal
Reflections possible - none
Hierin lijkt me de refresh rate raar, maar ik zou niet weten of het iets anders is dan Hz.
ddcprobe:
$ sudo ddcprobe
Password:
vbe: VESA 2.0 detected.
oem: ATI MOBILITY RADEON 7500
memory: 32768kb
mode: 320x200x32k
mode: 320x200x64k
mode: 320x200x16m
mode: 1600x1200x256
mode: 640x400x256
mode: 640x480x256
mode: 640x480x32k
mode: 640x480x64k
mode: 640x480x16m
mode: 1600x1200x32k
mode: 800x600x256
mode: 800x600x32k
mode: 800x600x64k
mode: 800x600x16m
mode: 1600x1200x64k
mode: 1024x768x256
mode: 1024x768x32k
mode: 1024x768x64k
mode: 1024x768x16m
mode: 1280x1024x256
mode: 1280x1024x32k
mode: 1280x1024x64k
mode: 1280x1024x16m
edid:
edid: 1 3
id: 1c12
eisa: HTC1c12
serial: 32116644
manufacture: 34 2002
input: analog signal.
screensize: 31 23
gamma: 2.200000
dpms: RGB, no active off, no suspend, no standby
dtiming: 1400x1050@70
monitorid: Hitachi
monitorid: TX38D91VC1FA
Ik heb geen idee wat dit precies inhoudt. De resolutie die ik wil staat niet in het lijstje, maar hij staat wel als dtiming.
Dan nog een opsomming van wat ik allemaal heb geprobeerd (met behulp van wat behulpzame mensen op irc)
In xorg.conf:
Resolutie die ik wil daarin gezet. Deze stond er standaard al in, maar blijft niet te kiezen.
Een aantal verschillende ModeLines gemaakt met de resolutie die ik wil (dit zorgde ervoor dat ik de xorg.conf backup terug moest zetten omdat X niet meer op wilde starten)
De driver aangepast van ati naar radeon (in combinatie met de voorgaande dingen)
Niets lijkt te helpen, en behalve dat bij een modeline toevoegen niks meer werkt lijkt het allemaal geen verschil te hebben. Volgens mij werkt het wel als ik een lagere resolutie instel, dan gaat ie op die resolutie staan.
Tot slot nog mijn huidige xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon Mobility M7 LW [Radeon Mobility 9000]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon Mobility M7 LW [Radeon Mobility 9000]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 4
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 8
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 15
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 16
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 24
Modes "1400x1050"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
Is er iets dat ik nog kan proberen, of moet ik me er bij neerleggen dat mijn videokaart of monitor niet ondersteund wordt?