The VirtualBox kernel driver is not accessible to the current user.

[MrNewbie]

Hallo.

Sinds vandaag ben ik overgestapt op Ubuntu.
Ik wil gebruik kunnen maken van een 2e OS, Windows XP, welke ik wil installeren vanaf CD.
Ik heb Virtualbox geinstalleerd, maar krijg de volgende melding als ik XP in virualbox probeer op te starten zodat ik deze kan installeren;


The VirtualBox kernel driver is not accessible to the current user. Make sure that the user has write permissions for /dev/vboxdrv by adding them to the vboxusers groups. You will need to logout for the change to take effect..
VBox status code: -1909 (VERR_VM_DRIVER_NOT_ACCESSIBLE).


Result Code:
0x80004005
Component:
Console
Interface:
IConsole {1dea5c4b-0753-4193-b909-22330f64ec45}

Weet iemand wat ik fout doe? (houdt er SVP rekening mee dat ik een newbie ben)

Groetjes,

MrNewbie

P.S. Tevens heb ik na de installatie van Ubuntu een ander IP adres, is dat normaal?

[Gul Dukat]

Heb je de gebruiker, die VirtualBox gebruikt, ook lid gemaakt van de groep vboxusers?

[maasnet]

Hallo.

Sinds vandaag ben ik overgestapt op Ubuntu.
Ik wil gebruik kunnen maken van een 2e OS, Windows XP, welke ik wil installeren vanaf CD.
Ik heb Virtualbox geinstalleerd, maar krijg de volgende melding als ik XP in virualbox probeer op te starten zodat ik deze kan installeren;


The VirtualBox kernel driver is not accessible to the current user. Make sure that the user has write permissions for /dev/vboxdrv by adding them to the vboxusers groups. You will need to logout for the change to take effect..
VBox status code: -1909 (VERR_VM_DRIVER_NOT_ACCESSIBLE).


Result Code:
0x80004005
Component:
Console
Interface:
IConsole {1dea5c4b-0753-4193-b909-22330f64ec45}

Weet iemand wat ik fout doe? (houdt er SVP rekening mee dat ik een newbie ben)

Groetjes,

MrNewbie

P.S. Tevens heb ik na de installatie van Ubuntu een ander IP adres, is dat normaal?

Kijk hier eens: http://forum.ubuntu-nl.org/topic/15179

[Nunslaughter]

1: ga naar toepassingen - hulpmiddelen - terminalvenster...
    typ: sudo adduser username vboxuser   (username vervangen door uw gebruikersnaam in ubuntu)

2: dat is normaal, ik heb ook verschillende ips onder de verschillende besturingssystemen...

[woteb]

Open een terminal (je gebruikt waarschijnlijk Gnome?) Toepassingen ==> Hulpmiddelen ==> Terminal.

Binnen de terminal typ je: sudo gpasswd -a vboxusers
(Er wordt dan om je gebruikerspasswoord gevraagd)

Voor gebruik je dan je accountnaam. Hierdoor ben je aamgemeld bij de groep vboxusers. Dit is noodzakelijk om met VirtualBox te werken.

Succes!!

[woteb]

sudo adduser username vboxuser

Je vergeet de 's'. Het is vboxusers

[MrNewbie]

Bedankt voor de snelle reacties!
Ik ben erg echter nog niet uit...
Ik heb in de kernel sudo adduser mijnnaam vboxuser ingegeven, maar krijg vanuit de kernel de volgende melding;
The group `vboxuser' does not exist.

maasnet; bedankt voor de link, ik heb het vanmiddag al gelezen, maar kom er niet uit.

Groetjes,

MrNewbie

[MrNewbie]

sudo adduser username vboxuser

Je vergeet de 's'. Het is vboxusers

Nu krijg ik de melding; Adding user b to group vboxusers vanuit de kernel, maar ik dezelfde foutmelding als in virtualbox;

The VirtualBox kernel driver is not accessible to the current user. Make sure that the user has write permissions for /dev/vboxdrv by adding them to the vboxusers groups. You will need to logout for the change to take effect..
VBox status code: -1909 (VERR_VM_DRIVER_NOT_ACCESSIBLE).


Result Code:
0x80004005
Component:
Console
Interface:
IConsole {1dea5c4b-0753-4193-b909-22330f64ec45}


MrNewbie

[MrNewbie]

Het bleek dat ik virtualbox niet goed had geinstalleerd, terwijl deze nog wel aangevinkt onder add/remove apps stond.
Ik heb alles wat met virtualbox te maken had verwijderd vanuit synaptic packet manger, waarop ik werd verzocht om te rebooten.
Tijdens het booten van Ubuntu kreeg ik de melding dat de resolutie op een lager nivo draaide, en dat ik het zelf moest aanpassen.
Onder screen resoltution kan ik geen hogere resolutie kiezen, alles is nu heel groot. (800x600 op 85HZ)
Ik heb virualbox weer geinstalleerd middels add/remove apps, maar krijg nu een andere fout melding;

Could not load the settings file '/home/b/.VirtualBox/VirtualBox.xml' (VERR_OPEN_FAILED).
FATAL ERROR: Attribute 'LogHistoryCount' is not declared for element 'SystemProperties'
Location: '/home/b/.VirtualBox/VirtualBox.xml', line 25, column 159.


Result Code:
0x80004005
Component:
VirtualBox
Interface:
IVirtualBox {76b25f3c-15d4-4785-a9d3-adc6a462beec}

Heeft iemand een idee wat ik fout heb gedaan, en wat ik moet doen om de resoltutie weer normaal te krijgen, en hoe ik virtualbox kan gebruiken?

Groetjes,

MrNewbie

[Gul Dukat]

Heb je toevallig ook de driver voor je videokaart gedeinstalleerd?

[MrNewbie]

Gul_Dukat, bedankt voor je reactie,
Ik had de driver inderdaad verwijderd.
Ik heb 'm opnieuw geinstalleerd, maar ik heb het resolutie probleem nog steeds. (na een reboot)
Ik had NvTv TV out ook geinstalleerd, omdat ik mijn TV als 2e monitor gebruik, ik dacht dat het daaraan lag.
Ik heb NvTv TV out gedeinstalleerd, maar heb het probleem na een reboot nog steeds.


Virualbox geeft ook nog steeds dezelfde foutmelding;


Could not load the settings file '/home/b/.VirtualBox/VirtualBox.xml' (VERR_OPEN_FAILED).
FATAL ERROR: Attribute 'LogHistoryCount' is not declared for element 'SystemProperties'
Location: '/home/b/.VirtualBox/VirtualBox.xml', line 25, column 159.


Result Code:
0x80004005
Component:
VirtualBox
Interface:
IVirtualBox {76b25f3c-15d4-4785-a9d3-adc6a462beec}

Is het misschien een beter idee als ik voor een gehel nieuwe install ga??

Groetjes,

MrNewbie

[MrNewbie]

Allemaal bedankt voor jullie help.

Ik ga even voor een nieuwe install, ik heb zoveel zitten rotzooien dat het probleem overal aan kan liggen...

Bedankt en waarschijnlijk tot morgen!

Groetjes,

MrNewbie

[MrNewbie]

Ik heb Ubuntu even opnieuw geinstalleerd.
Ik heb krijg na het opstarten van Virtualbox nu deze foutmelding;


VirtualBox kernel driver not installed. The vboxdrv kernel module was either not loaded or /dev/vboxdrv was not created for some reason. Please install the virtualbox-ose-modules package for your kernel and execute '/etc/init.d/vboxdrv start' as root.
VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).


Result Code:
0x80004005
Component:
Console
Interface:
IConsole {1dea5c4b-0753-4193-b909-22330f64ec45}

Wat doe ik fout???

MrNewbie

[maasnet]

Heb je al eens op dit forum gekeken: http://forums.virtualbox.org/ ?

[MrNewbie]

Heb je al eens op dit forum gekeken: http://forums.virtualbox.org/ ?

Bedankt, dat zal ik doen als we er hier niet uitkomen.
Ik heb namelijk het idee dat het met Ubuntu te maken heeft.

Dit is de foutmelding die ik krijg als ik Virtualbox probeer op te starten;


VirtualBox kernel driver not installed. The vboxdrv kernel module was either not loaded or /dev/vboxdrv was not created for some reason. Please install the virtualbox-ose-modules package for your kernel and execute '/etc/init.d/vboxdrv start' as root.
VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).


Result Code:
0x80004005
Component:
Console
Interface:
IConsole {1dea5c4b-0753-4193-b909-22330f64ec45}


 "Please install the virtualbox-ose-modules package for your kernel and execute '/etc/init.d/vboxdrv start' as root."
Ik heb zojuist vanuit synaptic packet manager de virtualbox-ose-modules geinstalleerd.
Ik heb daarna vanuit de kernel  '/etc/init.d/vboxdrv start' als root uitgevoerd, waarop ik de volgende melding kreeg;

/etc/init.d/vboxdrv start
open: Permission denied
 * Starting VirtualBox kernel module vboxdrv                                    FATAL: Module vboxdrv not found.

open: Permission denied
 * Modprobe vboxdrv failed. Please use 'dmesg' to find out why.

Na het invoeren van  'dmesg' kreeg ik de volgende info;

[    0.000000] Linux version 2.6.22-14-server (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:34:23 GMT 2007 (Ubuntu 2.6.22-14.46-server)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000002ffec000 (usable)
[    0.000000]  BIOS-e820: 000000002ffec000 - 000000002ffef000 (ACPI data)
[    0.000000]  BIOS-e820: 000000002ffef000 - 000000002ffff000 (reserved)
[    0.000000]  BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 767MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 196588) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   196588
[    0.000000]   HighMem    196588 ->   196588
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   196588
[    0.000000] On node 0 totalpages: 196588
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1503 pages used for memmap
[    0.000000]   Normal zone: 190989 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F5270 checksum 0
[    0.000000] ACPI: RSDP 000F5270, 0014 (r0 ASUS  )
[    0.000000] ACPI: RSDT 2FFEC000, 0030 (r1 ASUS   P4B533   42302E31 MSFT 31313031)
[    0.000000] ACPI: FACP 2FFEC0C0, 0074 (r1 ASUS   P4B533   42302E31 MSFT 31313031)
[    0.000000] ACPI: DSDT 2FFEC134, 2816 (r1   ASUS P4B533       1000 MSFT  100000B)
[    0.000000] ACPI: FACS 2FFFF000, 0040
[    0.000000] ACPI: BOOT 2FFEC030, 0028 (r1 ASUS   P4B533   42302E31 MSFT 31313031)
[    0.000000] ACPI: APIC 2FFEC058, 005A (r1 ASUS   P4B533   42302E31 MSFT 31313031)
[    0.000000] ACPI: PM-Timer IO Port: 0xe408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:2 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[    0.000000] Built 1 zonelists.  Total pages: 195053
[    0.000000] Kernel command line: root=UUID=d1cde149-9b6b-4437-a6f1-cbc6ba50695f ro quiet splash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2019.988 MHz processor.
[   20.974257] Console: colour VGA+ 80x25
[   20.975236] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   20.976250] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   21.002261] Memory: 768104k/786352k available (2047k kernel code, 17592k reserved, 920k data, 364k init, 0k highmem)
[   21.002275] virtual kernel memory layout:
[   21.002276]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   21.002278]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[   21.002279]     vmalloc : 0xf0800000 - 0xffbfe000   ( 243 MB)
[   21.002281]     lowmem  : 0xc0000000 - 0xeffec000   ( 767 MB)
[   21.002282]       .init : 0xc03eb000 - 0xc0446000   ( 364 kB)
[   21.002284]       .data : 0xc02ffcc6 - 0xc03e5f04   ( 920 kB)
[   21.002285]       .text : 0xc0100000 - 0xc02ffcc6   (2047 kB)
[   21.002290] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   21.002340] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   21.152085] Calibrating delay using timer specific routine.. 4042.98 BogoMIPS (lpj=20214948)
[   21.152119] Security Framework v1.0.0 initialized
[   21.152128] SELinux:  Disabled at boot.
[   21.152145] Mount-cache hash table entries: 512
[   21.152331] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[   21.152347] CPU: Trace cache: 12K uops, L1 D cache: 8K
[   21.152351] CPU: L2 cache: 512K
[   21.152355] CPU: Hyper-Threading is disabled
[   21.152358] CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080 00000000 00000000 00000000
[   21.152374] Compat vDSO mapped to ffffe000.
[   21.152391] Checking 'hlt' instruction... OK.
[   21.192201] SMP alternatives: switching to UP code
[   21.192491] Freeing SMP alternatives: 11k freed
[   21.192993] Early unpacking initramfs... done
[   21.607257] ACPI: Core revision 20070126
[   21.607328] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   21.608836] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
[   21.608890] Total of 1 processors activated (4042.98 BogoMIPS).
[   21.609035] ENABLING IO-APIC IRQs
[   21.609234] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   21.820897] Brought up 1 CPUs
[   21.821067] Booting paravirtualized kernel on bare hardware
[   21.821148] Time: 21:55:26  Date: 10/13/107
[   21.821180] NET: Registered protocol family 16
[   21.821312] EISA bus registered
[   21.821330] ACPI: bus type pci registered
[   21.823199] PCI: PCI BIOS revision 2.10 entry at 0xf1ea0, last bus=2
[   21.823202] PCI: Using configuration type 1
[   21.823204] Setting up standard PCI resources
[   21.834880] ACPI: EC: Look up EC in DSDT
[   21.841566] ACPI: Interpreter enabled
[   21.841571] ACPI: (supports S0 S1 S4 S5)
[   21.841593] ACPI: Using IOAPIC for interrupt routing
[   21.848462] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   21.848481] PCI: Probing PCI hardware (bus 00)
[   21.848952] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[   21.848955] * this clock source is slow. If you are sure your timer does not have
[   21.848957] * this bug, please use "acpi_pm_good" to disable the workaround
[   21.849010] PCI: Enabled i801 SMBus device
[   21.849019] PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
[   21.849024] PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
[   21.849650] PCI: Transparent bridge - 0000:00:1e.0
[   21.849683] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   21.849789] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[   21.849861] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[   21.851693] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   21.851793] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   21.851906] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[   21.852016] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
[   21.852111] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   21.852208] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   21.852304] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   21.852400] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   21.852517] Linux Plug and Play Support v0.97 (c) Adam Belay
[   21.852534] pnp: PnP ACPI init
[   21.852548] ACPI: bus type pnp registered
[   21.856731] pnp: PnP ACPI: found 12 devices
[   21.856735] ACPI: ACPI bus type pnp unregistered
[   21.856741] PnPBIOS: Disabled by ACPI PNP
[   21.856818] PCI: Using ACPI for IRQ routing
[   21.856821] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   21.866327] NET: Registered protocol family 8
[   21.866330] NET: Registered protocol family 20
[   21.866344] NetLabel: Initializing
[   21.866347] NetLabel:  domain hash size = 128
[   21.866349] NetLabel:  protocols = UNLABELED CIPSOv4
[   21.866368] NetLabel:  unlabeled traffic allowed by default
[   21.866460] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[   21.866464] pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
[   21.866468] pnp: 00:00: iomem range 0x100000-0x2fffffff could not be reserved
[   21.866472] pnp: 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
[   21.866482] pnp: 00:02: ioport range 0xe400-0xe47f has been reserved
[   21.866486] pnp: 00:02: ioport range 0xe800-0xe81f has been reserved
[   21.866490] pnp: 00:02: ioport range 0xec00-0xec3f has been reserved
[   21.866494] pnp: 00:02: ioport range 0x4d6-0x4d6 has been reserved
[   21.866498] pnp: 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
[   21.866503] pnp: 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
[   21.866519] pnp: 00:0b: ioport range 0x3f0-0x3f1 has been reserved
[   21.870755] Time: tsc clocksource has been installed.
[   21.896911] PCI: Bridge: 0000:00:01.0
[   21.896914]   IO window: disabled.
[   21.896920]   MEM window: ed000000-ee7fffff
[   21.896924]   PREFETCH window: eff00000-f7ffffff
[   21.896932] PCI: Bridge: 0000:00:1e.0
[   21.896936]   IO window: b000-bfff
[   21.896943]   MEM window: ec000000-ec7fffff
[   21.896948]   PREFETCH window: ee800000-efefffff
[   21.896969] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   21.896987] NET: Registered protocol family 2
[   21.990597] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   21.990834] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[   21.993245] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   21.994192] TCP: Hash tables configured (established 131072 bind 65536)
[   21.994198] TCP reno registered
[   22.020718] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[   22.412128]  it is
[   22.839025] Freeing initrd memory: 6738k freed
[   22.839211] Simple Boot Flag at 0x3a set to 0x1
[   22.839549] audit: initializing netlink socket (disabled)
[   22.839571] audit(1194990926.260:1): initialized
[   22.842527] VFS: Disk quotas dquot_6.5.1
[   22.842606] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   22.842760] io scheduler noop registered
[   22.842764] io scheduler anticipatory registered
[   22.842769] io scheduler deadline registered (default)
[   22.842793] io scheduler cfq registered
[   22.842865] Boot video device is 0000:01:00.0
[   22.843082] isapnp: Scanning for PnP cards...
[   23.199387] isapnp: No Plug & Play device found
[   23.236280] Real Time Clock Driver v1.12ac
[   23.236408] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   23.238161] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   23.238469] input: Macintosh mouse button emulation as /class/input/input0
[   23.238580] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   23.238585] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   23.242339] serio: i8042 KBD port at 0x60,0x64 irq 1
[   23.242349] serio: i8042 AUX port at 0x60,0x64 irq 12
[   23.242638] mice: PS/2 mouse device common for all mice
[   23.242793] EISA: Probing bus 0 at eisa.0
[   23.242840] EISA: Detected 0 cards.
[   23.242989] TCP cubic registered
[   23.243004] NET: Registered protocol family 1
[   23.243038] Using IPI No-Shortcut mode
[   23.243258]   Magic number: 15:127:955
[   23.243394]   hash matches device ptyzc
[   23.244065] Freeing unused kernel memory: 364k freed
[   23.278282] input: AT Translated Set 2 keyboard as /class/input/input1
[   24.574589] fuse init (API version 7.8)
[   24.582736] Capability LSM initialized
[   24.595865] ACPI: Invalid PBLK length [5]
[   24.595915] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   25.421736] usbcore: registered new interface driver usbfs
[   25.421773] usbcore: registered new interface driver hub
[   25.421805] usbcore: registered new device driver usb
[   25.423198] USB Universal Host Controller Interface driver v3.0
[   25.423293] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[   25.423310] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   25.423315] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   25.423526] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   25.423560] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
[   25.423730] usb usb1: configuration #1 chosen from 1 choice
[   25.423777] hub 1-0:1.0: USB hub found
[   25.423789] hub 1-0:1.0: 2 ports detected
[   25.524177] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 17
[   25.524194] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   25.524200] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   25.524236] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   25.524269] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d400
[   25.524404] usb usb2: configuration #1 chosen from 1 choice
[   25.524444] hub 2-0:1.0: USB hub found
[   25.524455] hub 2-0:1.0: 2 ports detected
[   25.609077] SCSI subsystem initialized
[   25.617220] libata version 2.21 loaded.
[   25.634018] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   25.634036] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   25.634041] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   25.634075] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   25.634107] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[   25.634245] usb usb3: configuration #1 chosen from 1 choice
[   25.634286] hub 3-0:1.0: USB hub found
[   25.634299] hub 3-0:1.0: 2 ports detected
[   25.743844] PCI: Enabling device 0000:00:1d.7 (0004 -> 0006)
[   25.743862] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[   25.743882] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   25.743887] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   25.743922] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[   25.743973] ehci_hcd 0000:00:1d.7: debug port 1
[   25.743981] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   25.743995] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xec800000
[   25.751418] Floppy drive(s): fd0 is 1.44M
[   25.791670] FDC 0 is a post-1991 82077
[   25.803521] usb 1-2: new low speed USB device using uhci_hcd and address 2
[   25.803548] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   25.803741] usb usb4: configuration #1 chosen from 1 choice
[   25.803787] hub 4-0:1.0: USB hub found
[   25.803800] hub 4-0:1.0: 6 ports detected
[   25.913781] PCI: Enabling device 0000:02:0b.0 (0014 -> 0017)
[   25.913794] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 19
[   25.913805] 3c59x: Donald Becker and others.
[   25.913813] 0000:02:0b.0: 3Com PCI 3c980C Python-T at f0806000.
[   25.937862] ata_piix 0000:00:1f.1: version 2.11
[   25.937892] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   25.937959] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   25.938100] scsi0 : ata_piix
[   25.938492] scsi1 : ata_piix
[   25.938655] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[   25.938661] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[   26.149569] ata1.01: ATA-7: MAXTOR STM3320820A, 3.AAE, max UDMA/100
[   26.149576] ata1.01: 625142448 sectors, multi 16: LBA48
[   26.232534] ata1.01: configured for UDMA/100
[   26.532103] usb 4-4: new high speed USB device using ehci_hcd and address 3
[   26.684229] usb 4-4: configuration #1 chosen from 1 choice
[   26.851803] ata2.00: ATAPI: _NEC DVD_RW ND-2510A, 2.15, max UDMA/33
[   26.851813] ata2.01: ATAPI: AOPEN DVD1648/LKY, DSA4, max UDMA/33
[   26.961301] usb 1-2: new low speed USB device using uhci_hcd and address 3
[   27.051430] ata2.00: configured for UDMA/33
[   27.142185] usb 1-2: configuration #1 chosen from 1 choice
[   27.146193] usbcore: registered new interface driver libusual
[   27.158695] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   27.158703] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   27.162495] Initializing USB Mass Storage driver...
[   27.162608] scsi2 : SCSI emulation for USB Mass Storage devices
[   27.162693] usbcore: registered new interface driver usb-storage
[   27.162697] USB Mass Storage support registered.
[   27.162713] usb-storage: device found at 3
[   27.162716] usb-storage: waiting for device to settle before scanning
[   27.181591] usbcore: registered new interface driver hiddev
[   27.195273] input: Trust GM-4200 Gamer Optical Mouse as /class/input/input2
[   27.195307] input: USB HID v1.11 Mouse [Trust GM-4200 Gamer Optical Mouse] on usb-0000:00:1d.0-2
[   27.195327] usbcore: registered new interface driver usbhid
[   27.195332] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   27.211193] ata2.01: configured for UDMA/33
[   27.213221] scsi 0:0:1:0: Direct-Access     ATA      MAXTOR STM332082 3.AA PQ: 0 ANSI: 5
[   27.214383] scsi 1:0:0:0: CD-ROM            _NEC     DVD_RW ND-2510A  2.15 PQ: 0 ANSI: 5
[   27.214767] scsi 1:0:1:0: CD-ROM            AOPEN    DVD1648/LKY      DSA4 PQ: 0 ANSI: 5
[   27.235682] sd 0:0:1:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   27.235723] sd 0:0:1:0: [sda] Write Protect is off
[   27.235727] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[   27.235777] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   27.235865] sd 0:0:1:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   27.235879] sd 0:0:1:0: [sda] Write Protect is off
[   27.235883] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[   27.235906] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   27.235912]  sda: sda1 sda2 < sda5 >
[   27.283741] sd 0:0:1:0: [sda] Attached SCSI disk
[   27.292647] sd 0:0:1:0: Attached scsi generic sg0 type 0
[   27.292702] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   27.292729] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[   27.314291] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[   27.314299] Uniform CD-ROM driver Revision: 3.20
[   27.314380] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   27.325235] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[   27.325320] sr 1:0:1:0: Attached scsi CD-ROM sr1
[   27.589610] Attempting manual resume
[   27.589616] swsusp: Resume From Partition 8:5
[   27.589618] PM: Checking swsusp image.
[   27.589842] PM: Resume from disk failed.
[   27.645446] kjournald starting.  Commit interval 5 seconds
[   27.645462] EXT3-fs: mounted filesystem with ordered data mode.
[   32.151856] usb-storage: device scan complete
[   32.152481] scsi 2:0:0:0: Direct-Access     EM640AA  MP3 Player            PQ: 0 ANSI: 0 CCS
[   32.153695] sd 2:0:0:0: [sdb] 4036608 512-byte hardware sectors (2067 MB)
[   32.154317] sd 2:0:0:0: [sdb] Write Protect is off
[   32.154321] sd 2:0:0:0: [sdb] Mode Sense: 3b 00 00 00
[   32.154324] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   32.156438] sd 2:0:0:0: [sdb] 4036608 512-byte hardware sectors (2067 MB)
[   32.157061] sd 2:0:0:0: [sdb] Write Protect is off
[   32.157064] sd 2:0:0:0: [sdb] Mode Sense: 3b 00 00 00
[   32.157067] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   32.157072]  sdb: sdb1
[   32.158138] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   32.158191] sd 2:0:0:0: Attached scsi generic sg3 type 0
[   34.855923] Linux agpgart interface v0.102 (c) Dave Jones
[   35.027511] agpgart: Detected an Intel 845G Chipset.
[   35.031301] agpgart: AGP aperture is 64M @ 0xf8000000
[   35.039362] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   35.041875] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   35.758730] intel_rng: FWH not detected
[   36.120206] Linux video capture interface: v2.00
[   36.160814] input: PC Speaker as /class/input/input3
[   36.175979] iTCO_vendor_support: vendor-support=0
[   36.177571] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   36.234448] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0xe460)
[   36.234502] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   36.253935] parport_pc 00:09: reported by Plug and Play ACPI
[   36.253993] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   36.585278] bttv: driver version 0.9.17 loaded
[   36.585285] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   36.585347] bttv: Bt8xx card found (0).
[   36.585373] PCI: Enabling device 0000:02:0c.0 (0004 -> 0006)
[   36.585389] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
[   36.585405] bttv0: Bt878 (rev 17) at 0000:02:0c.0, irq: 20, latency: 32, mmio: 0xef000000
[   36.585438] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
[   36.585442] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
[   36.585479] bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init]
[   36.585858] bttv0: i2c: checking for MSP34xx @ 0x80... found
[   36.586129] bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
[   36.586132] bttv0: using tuner=33
[   36.586136] bttv0: i2c: checking for MSP34xx @ 0x80... found
[   36.606057] msp3400 0-0040: MSP3410G-B11 found @ 0x80 (bt878 #0 [sw])
[   36.606062] msp3400 0-0040: MSP3410G-B11 supports nicam and radio, mode is autodetect and autoselect
[   36.945903] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[   37.078582] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[   37.123137] tuner 0-004b: chip found @ 0x96 (bt878 #0 [sw])
[   37.123190] tda9887 0-004b: tda988[5/6/7] found @ 0x4b (tuner)
[   37.124328] tuner 0-0060: Chip ID is not zero. It is not a TEA5767
[   37.124331] tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
[   37.127279] tuner 0-0060: microtune: companycode=3cbf part=42 rev=22
[   37.128596] tuner 0-0060: microtune MT2050 found, OK
[   37.131531] tuner 0-0060: microtune: companycode=3cbf part=42 rev=22
[   37.132849] tuner 0-0060: microtune MT2050 found, OK
[   37.145735] bttv0: registered device video0
[   37.145761] bttv0: registered device vbi0
[   37.145784] bttv0: registered device radio0
[   37.163970] bttv0: PLL: 28636363 => 35468950 .. ok
[   37.215526] PCI: Enabling device 0000:02:03.0 (0084 -> 0085)
[   37.215543] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 21 (level, low) -> IRQ 21
[   37.225636] bt878: AUDIO driver version 0.0.0 loaded
[   37.225675] bt878: Bt878 AUDIO function found (0).
[   37.225697] PCI: Enabling device 0000:02:0c.1 (0004 -> 0006)
[   37.225707] ACPI: PCI Interrupt 0000:02:0c.1[A] -> GSI 20 (level, low) -> IRQ 20
[   37.225716] bt878_probe: card id=[0x1211bd], Unknown card.
[   37.225718] Exiting..
[   37.225723] ACPI: PCI interrupt for device 0000:02:0c.1 disabled
[   37.225729] bt878: probe of 0000:02:0c.1 failed with error -22
[   37.603773] lp0: using parport0 (interrupt-driven).
[   37.652130] Adding 2265124k swap on /dev/sda5.  Priority:-1 extents:1 across:2265124k
[   38.012444] EXT3 FS on sda1, internal journal
[   39.013025] No dock devices found.
[   39.074068] input: Power Button (FF) as /class/input/input4
[   39.074103] ACPI: Power Button (FF) [PWRF]
[   39.074158] input: Power Button (CM) as /class/input/input5
[   39.074180] ACPI: Power Button (CM) [PWRB]
[   41.219341] eth0:  setting full-duplex.
[   41.361761] ppdev: user-space parallel port driver
[   41.626119] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   41.626127] apm: overridden by ACPI.
[   42.020552] Capability LSM initialized
[   42.243804] Bluetooth: Core ver 2.11
[   42.243894] NET: Registered protocol family 31
[   42.243897] Bluetooth: HCI device and connection manager initialized
[   42.243902] Bluetooth: HCI socket layer initialized
[   42.262018] Bluetooth: L2CAP ver 2.8
[   42.262024] Bluetooth: L2CAP socket layer initialized
[   42.340552] Bluetooth: RFCOMM socket layer initialized
[   42.340572] Bluetooth: RFCOMM TTY layer initialized
[   42.340575] Bluetooth: RFCOMM ver 1.8
[   46.625630] NET: Registered protocol family 17
[   52.176442] NET: Registered protocol family 10
[   52.176557] lo: Disabled Privacy Extensions
[   62.969400] eth0: no IPv6 routers present

Weet iemand waar het aan ligt?

MrNewbie

[woteb]

Even iets anders. Ik heb bij Gutsy (die jij denk ik ook gebruikt) ook VirtualBox vanuit Synaptic geïnstalleerd. Maar daar werkte één toets gewoon niet, de "-toets die ik vaak nodig heb voor een dubbele aanhalingsteken ", een ë of é enz.

Uiteindelijk heb ik gewoon de .deb van de site van VirtualBox gedownload en die geïnstalleerd. Die werkt perfect. Alleen je eigen account toevoegen aan vboxusers (is hierboven al behandeld) en een keer uitloggen en inloggen. Werkt dan meteen.
Wel oppassen dat je de goede versie van Ubuntu gebruikt. Hier kun je ze downloaden: http://www.virtualbox.org/wiki/Downloads

Veel succes.

[MrNewbie]

Bedankt woteb!
Ik ga het even proberen.

Groetjes,

MrNewbie

[Hendrikdegraaf]

Ik zit met een soortgelijk probleem:
- Eerst via Synaptik VirtualBox geïnstalleerd.
- Vervolgens opnieuw geprobeerd via het .deb pakket.
- Tijden het installatie-proces werd de gebruikersgroep vboxusers aangemaakt

Ik krijg echter nog steeds dezelfde foutmeldingen:
sudo adduser vboxusers
adduser: De gebruiker bestaat niet.

en uiteraard als gevolg ook:
sudo gpasswd -a vboxusers
gpasswd: onbekende gebruiker:

Waarom pakt ie dit niet?

Alvast bedankt voor de hulp!
Hendrik

[Nunslaughter]

Ik zit met een soortgelijk probleem:
- Eerst via Synaptik VirtualBox geïnstalleerd.
- Vervolgens opnieuw geprobeerd via het .deb pakket.
- Tijden het installatie-proces werd de gebruikersgroep vboxusers aangemaakt

Ik krijg echter nog steeds dezelfde foutmeldingen:
sudo adduser vboxusers
adduser: De gebruiker bestaat niet.

en uiteraard als gevolg ook:
sudo gpasswd -a vboxusers
gpasswd: onbekende gebruiker:

Waarom pakt ie dit niet?

Alvast bedankt voor de hulp!
Hendrik

hebt ge ondertussen uw pc eens herstart? dat zou moeten helpen...

[Hendrikdegraaf]

Yep, dit heeft geen effect gehad. Nog steeds dezelde problemen als eerder beschreven!

Ik hoop dat iemand iets weet.....

[Bandicoot]

Ik had het ook al ergens anders op het forum geschreven maar als je het eens op de grafische manier probeert? Ik kreeg dezelfde melding en heb het op onderstaande wijze gedaan en kreeg geen foutmelding meer:

Vwb je virtualbox probleem, je moet je zelf toevoegen aan de vboxusergroups. Je kunt dat ook grafisch doen door te gaan naar system en dan administration (weet zoeven niet hoe ze in de nderlandse versie heten) en dan de onderste optie users and groups als je die optie hebt aangeklikt kies je voor manage groups , scroll de lijst door totdat je bij de vboxusers komt kies dan voor properties (eigenschappen) en vink je zelf aan als groupmember. Als je dat gedaan hebt moet je ff rebooten.

[bassreal]

Ik heb Ubuntu even opnieuw geinstalleerd.
Ik heb krijg na het opstarten van Virtualbox nu deze foutmelding;


VirtualBox kernel driver not installed. The vboxdrv kernel module was either not loaded or /dev/vboxdrv was not created for some reason. Please install the virtualbox-ose-modules package for your kernel and execute '/etc/init.d/vboxdrv start' as root.
VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).


Result Code:
0x80004005
Component:
Console
Interface:
IConsole {1dea5c4b-0753-4193-b909-22330f64ec45}

Wat doe ik fout???

MrNewbie

ik had die foutmelding ook
die is grafisch heel simpel op te lossen in gutsy
ga naar systeem  dan naar beheer en dan klik je op gebruikers en groepen (users and groups)
dan druk je op groepen beheren en scroll je naar beneden naar de groep vboxusers
klik daar dubbel op en vink de naam van jouw account aan
even herstarten en je bent klaar

is blijkbaar al opgelost

[woteb]

Uitloggen en opnieuw inloggen is al voldoende hoor.. Het is geen MS Windows....

[Hendrikdegraaf]

Via systeem > beheer > gebruikers en groepen was het inderdaad zo opgelost. Mijn VirtualBox draait nu!

Wat gek dat het via de commandline niet lukte! Meestal is het andersom. Misschien lag het aan de commando's

Groet,
Hendrik